(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
- inCAD Library Home
- > No.000165 Intermittent Rotary Drive by Air Cylinder
No.000165 Intermittent Rotary Drive by Air Cylinder
112
112
Single-direction 90-degree-increment rotary feed with a ratchet mechanism.
Relevant category
Thrust Ball Bearings
| Product name | Thrust Ball Bearings |
|---|---|
| Part number | B51105 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Available sizes
■Thrust Ball Bearings
| Name No. | Shaft Bore Dia. | O.D. | Overall thickness | ||||
|---|---|---|---|---|---|---|---|
| Material: 52100 Bearing Steel | Material: 440C Stainless Steel | Tolerance | Tolerance | Tolerance | |||
| B51100 | SB51100 | φ10 | 0/-0.008 | φ24 | 0/-0.013 | 9 | 0/-0.075 |
| B51200 | - | φ26 | 11 | ||||
| B51101 | SB51101 | φ12 | 9 | ||||
| B51201 | - | φ28 | 11 | ||||
| B51102 | SB51102 | φ15 | 9 | ||||
| B51202 | - | φ32 | 0/-0.016 | 12 | |||
| B51103 | SB51103 | φ17 | φ30 | 9 | |||
| B51203 | - | φ35 | 12 | ||||
| B51104 | SB51104 | φ20 | 0/-0.010 | 10 | |||
| B51204 | - | φ40 | 14 | ||||
| B51105 | SB51105 | φ25 | φ42 | 11 | |||
| B51205 | - | φ47 | 15 | ||||
| B51106 | SB51106 | φ30 | 11 | ||||
| B51206 | - | φ52 | 0/-0.019 | 16 | |||
* Please see the product pages for recommended dimensions of the mating shaft.
Performance info.
■Load information of the thrust ball bearings
| Shaft Bore Dia. | O.D. | Basic Load Rating (kN) | Allowable Rotational Speed (Reference) （rpm） | |||
|---|---|---|---|---|---|---|
| Material: 52100 Bearing Steel | Material: 440C Stainless Steel | |||||
| Ca(Dynamic) | Coa((Static) | Ca(Dynamic) | Coa((Static) | |||
| φ10 | φ24 | 10.1 | 14 | 5 | 6.96 | 6700 |
| φ26 | 12.8 | 17.1 | - | - | 6000 | |
| φ12 | 10.4 | 15.4 | 5.15 | 7.7 | 6700 | |
| φ28 | 13.3 | 19 | - | - | 5600 | |
| φ15 | 10.6 | 16.8 | 5.25 | 8.38 | 6300 | |
| φ32 | 16.7 | 24.8 | - | - | 5000 | |
| φ17 | φ30 | 11.4 | 19.5 | 5.39 | 9.07 | 6000 |
| φ35 | 17.3 | 27.3 | - | - | 4800 | |
| φ20 | 15.1 | 26.6 | 7.11 | 12.36 | 5300 | |
| φ40 | 22.5 | 37.5 | - | - | 4300 | |
| φ25 | φ42 | 19.7 | 37 | 9.76 | 18.63 | 4800 |
| φ47 | 28 | 50.5 | - | - | 3800 | |
| φ30 | 20.6 | 42 | 10.2 | 21.08 | 4300 | |
| φ52 | 29.5 | 58 | - | - | 3400 | |
Bearing Nuts / Tooth Lock Washers
| Product name | Bearing Lock Nuts - With Tooth Lock Washer |
|---|---|
| Part number | JLNK17 |
| Features | Nut and Tooth Lock Washer for Bearing. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Available sizes
■Bearing Lock Nuts - With Tooth Lock Washer
| Material | |
|---|---|
| Nut | Tooth Lock Washers |
| 1018 Carbon Steel | Low Carbon Steel |
| No.10-20, 303 Stainless Steel | 304 Stainless Steel |
| No.25-50, 304 Stainless Steel | |
■Sizes and Dimensions
| Nut | Tooth Lock Washers | |||||
|---|---|---|---|---|---|---|
| Screw Dia. X Pitch (Fine thread) | O.D. | Mounting side O.D. | Thickness | O.D. | Plate Thickness | Number of Teeth |
| M10×0.75 | φ18 | φ13 | 4 | φ21 | 1 | 9 |
| M12×1.0 | φ22 | φ17 | φ25 | |||
| M15×1.0 | φ25 | φ21 | 5 | φ28 | 13 | |
| M17×1.0 | φ28 | φ24 | φ32 | |||
| M20×1.0 | φ32 | φ26 | 6 | φ36 | ||
| M25×1.5 | φ38 | φ32 | 7 | φ42 | 1.2 | |
| M30×1.5 | φ45 | φ38 | φ49 | |||
| M35×1.5 | φ52 | φ44 | 8 | φ57 | 15 | |
| M40×1.5 | φ58 | φ50 | 9 | φ62 | ||
| M45×1.5 | φ65 | φ56 | 10 | φ69 | 17 | |
| M50×1.5 | φ70 | φ61 | 11 | φ74 | ||
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Purpose
- To feed workpieces intermittently by rotating them 90 degrees at a time.
- Operation
- After the rotary table is rotated 90 degrees, the thin cylinder advances the stopper pin. When the driving cylinder advances, the rotary table is kept stationary by the ratchet mechanism.
Target workpiece
- Shape: rectangular electronic part
- Size: W15 x D40 x H30mm
- Weight: 0.019kg
Design Specifications
Operating Conditions or Design Requirements
- Driving cylinder stroke: 100mm
- Positioning cylinder stroke: 10mm
- Rotary table rotation angle per cycle:90°
- Outer dimensions: width: W434 at maximum x height: H132mm
Table outer diameter: φ300mm
Required Performance
- Load: product + pallet = 15N
Selection Criteria for Main Components
- To rotate a load of 0.024 (0.008 x 3) [N], a cylinder with an inner tube diameter of φ20mm is selected.
Design Evaluation
Verification of main components
- Must verify the cylinder thrust to ensure the necessary rotation force can be obtained.
- Selection of driving cylinder
- Conditional value: workpiece mass: W = 0.55kg, gravitational acceleration g = 9.8m/s², friction coefficient μ = 0.0015, instroke pressure area A1 = 264mm²
, operating pressure P1 = 0.4MPa - The force F1 required for rotation is obtained by F1 = W x g x μ, therefore, F1 = 0.55 x 9.8 x 0.0015 ≈ 0.008N.
The cylinder thrust (instroke) F2 is, F2 = A1 x P1 = 264 x 0.4 ≈ 105N > F1.
⇒There is no problem.
- Conditional value: workpiece mass: W = 0.55kg, gravitational acceleration g = 9.8m/s², friction coefficient μ = 0.0015, instroke pressure area A1 = 264mm²
Explore Similar Application Examples
Page
-
/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Relevant category
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.