This Website uses cookies. Please accept our cookie policy for your best experience.
You can learn more on how to adjust your cookie setting in our Privacy Policy here
(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
- inCAD Library Home
- > No.000081 No Load Gripping Mechanism
No.000081 No Load Gripping Mechanism
16
16
No load gripping with a cylinder
Relevant category
Cylinder with Guides
| Product name | Cylinders with Twin Guides? |
|---|---|
| Part number | MGCLF16-20 |
| Features | Cylinders having the guides on both ends for usability. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Guided type, size and stroke.
Available sizes
■Cylinder with Guides (Fixed stroke type)
| Bore dia. | Bearing | Slide bearing | Linear bushing bearing | Cylinder width (mm) | Overall length （Below +St） | Thickness (mm) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| St | 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | ||||
| φ12 | ○ | ○ | ― | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ― | ○ | ○ | ○ | ○ | ○ | 56 | 39 | 22 | |
| φ16 | ○ | ○ | ― | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ― | ○ | ○ | ○ | ○ | ○ | 62 | 43 | 25 | |
| φ20 | ― | ○ | ― | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ― | ○ | ○ | ○ | ○ | ○ | 72 | 47 | 30 | |
| φ25 | ― | ○ | ― | ○ | ○ | ○ | ○ | ○ | ― | ○ | ― | ○ | ○ | ○ | ○ | ○ | 86 | 47.5 | 38 | |
| φ32 | ― | ― | ○ | ― | ― | ○ | ○ | ○ | ― | ― | ○ | ― | ― | ○ | ○ | ○ | 112 | 48 | ||
| φ50 | ― | ― | ○ | ― | ― | ○ | ― | ○ | ― | ― | ― | ― | ― | ― | ― | ― | 146 | 72 | 60 | |
Selection steps
■Cylinder selection steps
1, Define various load conditions
↓
2, Calculate cylinder output. (in case of double acting cylinder)
↓
3, Determine bore dia.
↓
4, Determine theoretical reference speed
↓
5, Verify cylinder's cushion mechanism
6, Verify lateral load applicable on the cylinder
Accuracy Info
■Non-rotating accuracy of guided cylinder
Non-rotating accuracy: Looseness by guide rod and bearing clearance represented in a rotation angle centered on the piston rod.
| Bore dia. | Non-rotating accuracy of tip link bar | |
|---|---|---|
| Slide bearing | Linear bushing bearing | |
| φ12 | ±0.12° | ±0.06° |
| φ16 | ±0.10° | ±0.06° |
| φ20 | ±0.09° | ±0.05° |
| φ25 | ±0.08° | ±0.05° |
| φ32 | ±0.06° | ±0.04° |
| φ50 | ±0.05° | － |
Performance info.
■Theoretical force
(N)
| Bore dia. (mm) | Operation direction | Applied pressure (MPa) | |
|---|---|---|---|
| 0.4 | 0.5 | ||
| 12 | Push side | 45 | 57 |
| Pull side | 34 | 42 | |
| 16 | Push side | 80 | 101 |
| Pull side | 60 | 75 | |
| 20 | Push side | 126 | 157 |
| Pull side | 94 | 118 | |
| 25 | Push side | 196 | 245 |
| Pull side | 151 | 189 | |
| 32 | Push side | 322 | 402 |
| Pull side | 241 | 302 | |
| 50 | Push side | 785 | 982 |
| Pull side | 660 | 825 | |
■ Allowable lateral load
（N・ｍ)
| Bore dia. (mm) | Stroke (mm) | |||||||
|---|---|---|---|---|---|---|---|---|
| 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | |
| 12 | 24 | 19 | ― | 16 | 14 | 12 | 37 | 31 |
| 16 | 40 | 33 | ― | 28 | 24 | 21 | 55 | 46 |
| 20 | ― | 52 | ― | 45 | 39 | 35 | 55 | 46 |
| 25 | ― | 69 | ― | 60 | 52 | 47 | 73 | 62 |
| 32 | ― | ― | 166 | ― | ― | 131 | 107 | 91 |
| 50 | ― | ― | 296 | ― | ― | 245 | ― | 241 |
Sensor for cylinder
| Product name | Sensors - For Cylinders, Grippers? |
|---|---|
| Part number | MD13L3 |
| Features | Sensors dedicated for Double Acting Cylinder |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Sensors dedicated to selected cylinder
Available sizes
■Sensor for cylinder
| Cable length (m) | Sensor type | Number of leads | Lead wire exit direction |
|---|---|---|---|
| 1、3 | With contacts | 2 wires | Back |
| 1、3 | No contacts | 3 wires | |
| 1、3 | No contacts | 2 wires | |
| 1、3 | No contacts | 3 wires | Top |
| 1、3 | No contacts | 2 wires |
Flow Rate Control Valve
| Product name | Flow Rate Control Valves - 90 Deg. Elbow, Standard |
|---|---|
| Part number | SPSNL6-M5 |
| Features | Speed Controllers capable of adjusting the flow rate of compressed air. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
To match selected cylinder size and to control cylinder stroke speed
Available sizes
■Flow Rate Control Valve
| Material | Control type | Color | |
|---|---|---|---|
| Black | White | ||
| Polybutylene terephthalate Threads: 304 Stainless Steel | Meter-out | ○ | ○ |
| Polybutylene terephthalate Threads: Brass | Meter-out | - | - |
| Meter-in | |||
■Sizes and Dimensions
| Bore dia. (mm) | Thread size |
|---|---|
| 4 | M5 |
| 1 | |
| 6 | M5 |
| 1 | |
| 2 | |
| 8 | 1 |
| 2 | |
| 3 | |
| 10 | 2 |
| 3 | |
| 4 | |
| 12 | 3 |
| 4 |
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Gripper mechanism that lifts workpiece without transferring load from lifting cylinder.
Points for use
- Gripping the workpiece is done using guided cylinder.
- Since workpiece is loosely held inside gripper fingers this design is not recommended in applications that require high positioning accuracy.
Target workpiece
- Molded plastic assembly
External dims.: W110 x D40 x H88mm
Workpiece weight: 167g
Design Specifications
Operating Conditions or Design Requirements
- External dimensions: W217 x D80 x H137mm (When workpiece released)
- Cylinder stroke: 20mm
Required Performance
- Cylinder stroke tolerance: +1.5mm MAX.
Selection Criteria for Main Components
- Cylinder
- A cylinder with adequate stroke for the workpiece is selected.
- Gripping unit is mounted at the end of the robot arm, for space saving purpose low profile cylinders are selected.
Design Evaluation
Verification of main components
- Calculation not required since no load applies to the cylinder.
Other Design Consideration
- When holding the workpiece, use a wide surface for stability.
- Design should allow some clearance (~2mm) between gripping fingers and workpiece to compensate for cylinder stroke tolerance.
Explore Similar Application Examples
Page
1
/
28
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.