(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
- inCAD Library Home
- > No.000155 Workpiece Positioning
No.000155 Workpiece Positioning
17
17
Position workpieces by utilizing a link bar and cylinder design.
Relevant category
Stop Pin
| Product name | Stop Pins- Screw Type, T Standard |
|---|---|
| Part number | SSTEH17 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Effective as a stopper that absorbs the cylinder force
Available sizes
■Stop Pins- Screw Type, T Standard
| Material | Hardness | Surface Treatment | |
|---|---|---|---|
| Head Height Fixed | Head Height Configurable | ||
| 4137 Alloy Steel | 46-50HRC | 32-38HRC | Electroless Nickel Plating |
| 440C Stainless Steel | 50-55HRC | 40-45HRC | - |
■Sizes and Dimensions
| Opposite Side(mm) | Thickness(mm) | |
|---|---|---|
| Fixed | 0.5 mm increments | |
| 5.5A | 3 | 5.0～30.0 |
| 5.5 | 5 | |
| 7 | ||
| 8 | ||
| 10 | 5.0～30.0 | |
| 10B | 8 | |
| 13 | 5 | |
| 13A | 8 | |
| 13B | ||
| 14 | 5 | |
| 14A | 8 | |
| 14B | ||
| 17 | 5 | 5.0～30.0 |
| 17A | 8 | |
| 17B | ||
| 19 | 5 | |
| 19A | 8 | |
| 19B | ||
Accuracy Info
■Accuracy of Stop Pin
- Thickness Tolerance (mm)：
- +0.01
0
クランプ用先端金具
| Product name | トグルクランプ用先端ボルト |
|---|---|
| Part number | TGSPM4 |
| Features | 止め輪がないので取り付けが楽です |
* Orange colored cells in the table below indicate the part numbers used in this example.
Available sizes
■トグルクランプ用先端ボルト（スプリング付樹脂パッド省スペースタイプ）
| Pad | Bolt | Spring | |
|---|---|---|---|
| Material | Material | Surface Treatment | Material |
| Polyacetal(White) | 1045 Carbon Steel | Black Oxide | 304 Stainless Steel |
■Sizes and Dimensions
| Mounting screw DIA. | Stroke | Overall Length | Thread section length | Pad diameter |
|---|---|---|---|---|
| M4 | 3 | 34.5 | 20 | φ12 |
| M6 | 4 | 50 | 30 | φ13 |
| M8 | 8 | 60 | 30 | φ14 |
Selection steps
Mechanism Info.
Accuracy Info
Performance info.
長尺ローレット付カバーボルト
| Product name | カバーボルト 長尺ローレット付タイプ |
|---|---|
| Part number | GUTBR3-3.5-6 |
| Features |
* Orange colored cells in the table below indicate the part numbers used in this example.
Available sizes
■カバーボルト 長尺ローレット付タイプ
| Screw Dia. | Thread section length | Under head length | Knurled shaft | Under head DIA. | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 8 | 10 | 12 | 16 | 20 | 25 | 30 | Outer diameter | Length | ||||
| M3 | 2 | ○ | ○ | ○ | ○ | φ5.5 | 10 | φ2.2 | 303 Stainless Steel | ||||
| 3.5 | ○ | ○ | ○ | ○ | |||||||||
| 4 | ○ | ○ | ○ | ||||||||||
| M4 | 3 | ○ | ○ | ○ | ○ | ○ | φ7 | 16 | φ3 | ||||
| 5 | ○ | ○ | ○ | ||||||||||
| M5 | 3 | ○ | ○ | ○ | ○ | ○ | φ8.5 | 20 | φ3.9 | ||||
| 6 | ○ | ○ | ○ | ||||||||||
| M6 | 4 | ○ | ○ | ○ | ○ | ○ | φ10 | 30 | φ4.5 | ||||
| 8 | ○ | ○ | ○ | ○ | |||||||||
| M8 | 5 | ○ | ○ | ○ | ○ | φ13 | 36 | φ6.3 | |||||
| 10 | ○ | ○ | ○ | ||||||||||
Selection steps
Mechanism Info.
Accuracy Info
Performance info.
Technical calculations
商品ラインナップ
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- Workpiece positioning/alignment.
Points for use
- Workpiece positioning inside the cleaning tank.
Target workpiece
- Glass plate size:
t2xW860xD640mm
Design Specifications
Operating Conditions or Design Requirements
- Cylinder stroke: 75mm
- Rotation open-close angle: 45°
- External dimensions: W 439 x D269 (at alignment) x H270
(dimensions at one location) mm
Required Performance
- Positioning accuracy: ± 0.3mm
Selection Criteria for Main Components
- A cylinder with a bore diameter of 32 is selected to meet the required torque.
Design Evaluation
Verification of main components
- Verify the cylinder output will meet the design requirements..
- Required torque
- Conditional values: workpiece mass: m = 0.7kg, friction coefficient μ=0.7 (assumed glass vs. plastic), roller - shaft distance r: 0.191m
- F＝μ×m＝0.7×0.7＝0.49kgf≒4.8N
- Required torque T ＝ F x r＝4.8 x 0.191 ＝ 0.9N・m
- Torque by the cylinder
- Conditional values: Cylinder output F = 320 N, cylinder - shaft
distance R = 0.1m - Torque by the cylinder T=F×R=320×0.1=32N・m＞0.9N・m
Explore Similar Application Examples
Page
1
/
30
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.