(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
- inCAD Library Home
- > No.000101 Rotary Indexing Fixture
No.000101 Rotary Indexing Fixture
25
25
Possible to temporarily fix rotational position.
Relevant category
Roller
| Product name | Rollers - With Baked-on Urethane/Rubber Liner, Metal Core - With Set Screw Threads |
|---|---|
| Part number | ROGAN60-15-30 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
The Urethane Lined roller type excels at transmitting rotary motion
Risk info.
It is recommended to pre-test the transmissibility of the roller
Available sizes
■Roller (Tapped type)
| Material | Surface treatment | Hardness |
|---|---|---|
| Core material | (Lining) | |
| 304 Stainless Steel | - | - |
| 5052 Aluminum Alloy | Clear anodize | - |
| 304 Stainless Steel | Urethane | Shore A90 |
| 5052 Aluminum Alloy | ||
| 304 Stainless Steel | Shore A70 | |
| 5052 Aluminum Alloy | ||
| 304 Stainless Steel | Shore A50 | |
| 5052 Aluminum Alloy |
■Sizes and Dimensions
| Shape | O.D. | Shaft bore DIA. (H7 mm) | Length(mm) |
|---|---|---|---|
| Straight Crowned | 20 | 8 | 15-30(5 mm Increments)、40、50 |
| 25 | 8,10,12 | 15-30(5 mm Increments)、40、50 | |
| 30 | 8,10,12,15 | 15-30(5 mm Increments)、40、50 | |
| 35 | 10,12,15,20 | 20-30(5 mm Increments)、40、50 | |
| 40 | 10,12,15,20 | 20-30(5 mm Increments)、40、50 | |
| 50 | 12,15,20,25 | 25、30、40、50、100 | |
| 60 | 12,15,20,25,30 | 30、40、50、100 | |
| 80 | 15,20,25,30 | 40、50、100 |
Urethane molded bearing
| Product name | Silicon Rubber / Urethane Molded Bearings - Flat, with Threaded Shaft |
|---|---|
| Part number | UMBGH15-40 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Small contact area for driven side roller.
Available sizes
■Urethane molded bearing
| Material | Hardness | Color | Bearing | Shaft | |
|---|---|---|---|---|---|
| Material | Surface treatment | ||||
| Urethane | Shore A95 | Black | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating |
| 404C Stainless Steel | 303 Stainless Steel | - | |||
| White | 52100 Bearing Steel | Carbon Steel | Trivalent Chromate | ||
| 404C Stainless Steel | 303 Stainless Steel | - | |||
| Shore A90 | Black | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating | |
| 404C Stainless Steel | 303 Stainless Steel | - | |||
| White | 52100 Bearing Steel | Carbon Steel | Trivalent Chromate | ||
| 404C Stainless Steel | 303 Stainless Steel | - | |||
| Shore A70 | Black | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating | |
| Shore A50 | Black | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating | |
| White | 52100 Bearing Steel | Carbon Steel | Trivalent Chromate | ||
| Silicon rubber | Shore A70 | Lt. Gray | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating |
| 404C Stainless Steel | 303 Stainless Steel | - | |||
| Anti-static urethane | Shore A90 | Gray | 52100 Bearing Steel | Carbon Steel | Electroless nickel plating |
■Sizes and Dimensions
| Shaft bore DIA.(mm) | O.D.(mm) | Bearing used |
|---|---|---|
| 3 | 10 | W683ZZA |
| 12 | ||
| 4 | 13 | W684AX50ZZ |
| 16 | 624ZZ | |
| 5 | 16 | WBC5-13ZZ |
| 20 | 625ZZ | |
| 6 | 20 | 696ZZ |
| 28 | 626ZZ | |
| 8 | 28 | 608ZZ |
| 30 | 608ZZ | |
| 10 | 30 | 6000ZZ |
| 40 | 6200ZZ | |
| 15 | 40 | 6202ZZ |
| 45 | 6202ZZ | |
| 20 | 45 | 6904ZZ |
| 55 | 6204ZZ | |
| 25 | 65 | 6205ZZ |
Performance info.
■Load capacity of urethane molded bearing
| Shaft bore DIA.(mm) | O.D.(mm) | Urethane | Silicon | |||
|---|---|---|---|---|---|---|
| Shore A95 | Shore A90 | Shore A70 | Shore A50 | Shore A70 | ||
| 3 | 10 | 38(3.8) | 28(2.8) | 9(0.9) | 4(0.4) | 7(0.7) |
| 12 | 53(5.4) | 34(3.5) | 10(1) | 6(0.6) | 9.8(1) | |
| 4 | 13 | 66(6.7) | 44(4.5) | 13(1.3) | 7(0.7) | 13(1.3) |
| 16 | 79(8.1) | 59(6) | 16(1.6) | 6(0.6) | 18(1.8) | |
| 5 | 16 | 79(8.1) | 18(1.8) | |||
| 20 | 102(10.4) | 78(8) | 20(2) | 9(0.9) | 24(2.4) | |
| 6 | 20 | 114(11.7) | 23(2.3) | 15(1.5) | ||
| 28 | 218(22.2) | 157(16) | 44(4.5) | 39(4) | 47(4.8) | |
| 8 | 28 | 208(21.2) | 42(4.3) | 35(3.6) | ||
| 30 | - | 176(18) | 81(8.3) | 65(6.7) | 53(5.4) | |
| 10 | 30 | 94(9.6) | 51(5.2) | |||
| 40 | - | 274(28) | 136(13.9) | 93(9.5) | 82(8.4) | |
| 15 | 40 | 122(12.4) | 96(9.9) | |||
| 45 | - | 343(35) | 109(11.1) | 102(10.5) | 103(10.5) | |
| 20 | 45 | 130(13.3) | 98(10.1) | |||
| 55 | - | 490(50) | 225(22.9) | 176(18.1) | 147(15) | |
| 25 | 65 | - | 750(70) | 333(34) | 250(25.8) | 226(23) |
Device stand
| Product name | Device Stands - Compact Flange, Pipe |
|---|---|
| Part number | MSFSBN10-150 |
| Features | Device Stand with compact flange |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
This device stand can support a camera. It is a low cost option.
Available sizes
■Device stand (Compact, w/through hole)
| Post | Bracket | ||
|---|---|---|---|
| Material | Surface treatment | Material | Surface treatment |
| 1045 Carbon Steel (Induction hardened) | Electroless nickel plating | 1045 Carbon Steel | Low temp. black chrome plating |
| 1045 Carbon Steel | |||
| Black oxide | |||
| 304 Stainless Steel | - | ||
| 1045 Carbon Steel (Induction hardened) | Electroless nickel plating | 1045 Carbon Steel | Low temp. black chrome plating |
| 1045 Carbon Steel | |||
| 304 Stainless Steel | - | ||
| 1045 Carbon Steel | Black oxide | 1045 Carbon Steel | Black oxide |
| 304 Stainless Steel | - | 304 Stainless Steel | - |
■Sizes and Dimensions
| Post DIa. (mm) | Length (1 mm increments) | Flange O.D. | Mounting hole DIa. |
|---|---|---|---|
| (mm) | (mm) | ||
| 6 | 50-150 | 38x20 | 4.5 |
| 8 | 50-200 | 38x20 | |
| 10 | 50-250 | 40x22 | |
| 12 | 50-300 | 46x24 | 5.5 |
| 15 | 75-350 | 56x29 | 6.6 |
| 20 | 75-400 | 63x34 | 6.6 |
| 25 | 75-450 | 78x41 | 9 |
| 30 | 100-450 | 82x46 |
Accuracy Info
■Accuracy of Device stand
| Shaft DIa. | Tolerance (g6) |
|---|---|
| φ6 | -0.004 -0.012 |
| φ8 | -0.005 -0.014 |
| φ10 | |
| φ12 | -0.006 -0.017 |
| φ15 | |
| φ20 | -0.007 -0.020 |
| φ25 | |
| φ30 |
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
In case that the CAD data is found to have been to be used for any purpose other than mentioned above or against the related laws, MISUMI may take legal actions, including the one for blocking the involved user from using CAD data and from accessing to the MISUMI site. - 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
CAD Download (Unit Assembly)
CAD Download: File Format
CAD Data Limitations
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly Data consists of some sub-assemblies.
It is configured so that each sub-assembly unit can be used as it is or edited.
Application Overview
Purpose
- To rotate and affix cylindrical components in various positions to inspect the internal finish.
- The workpiece is rotated by hand. This is useful when the workpiece is too heavy to lift.
Points for use
- Use the clamp type shaft collar and knurled knob to lock the workpiece in place.
- The rollers are lined with urethane to prevent damages to workpieces.
Target workpiece
- Cylindrical workpiece
External dims: φ72 x L280
Workpiece weight: 2kg
Design Specifications
Operating Conditions or Design Requirements
- External dimensions: W600 x D120 x H165
Selection Criteria for Main Components
- Roller, Molded bearing
- High friction coefficient Shore A70 urethane is selected for temporary retention.
- Friction coefficient
Shore A90 0.413~0.515, Shore A70 0.624~0.648, Shore A50 0.600~0.677 - Friction coefficient
Shore A79 0.514~0.572, Shore A50 0.504~0.528
Design Evaluation
Other Design Consideration
- A knurled knob with a padded tip is used to retain roller rotation.
Explore Similar Application Examples
Page
1
/
24
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.