(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน พฤษภาคม 2567 | Notice holiday in May 2024 > คลิก
Roll Taps
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0UN
- No.10
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.12-28UNF
- No.12-24UNC
- No.2
- No.2UN
- No.2-64UNF
- No.2-56UNC
- No.3
- No.3UN
- No.3-56UNF
- No.3-48UNC
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- No.5-44UNF
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- No.8-36UNF
- No.8-32UNC
- 0.9
- S0.9
- M1
- 1/4
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.5
- M4
- M5
- M6
- No6-40UNF
- M7
- M8
- M9
- M10
- M11
- M12
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Screw Types
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 125 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Carbon Steel Metric Tap & Die Set
RS Pro
High quality tap and die set to DIN standard for thread repair work and general engineering use. Taper, Second & Plug TapsTap wrenchDiestockScrewdriverPlastic CaseFrom: ฿ 18,519.36 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Metric Hexagon drive drill and tap set featuring popular sizes for hand or power tool use.From: ฿ 4,870.55 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 623.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless Tap with Internal Coolant Supply (X Performer)_OIL-S-XPF
OSG
In addition to the performance of S-XPF, excellent lubrication and cooling effects are provided by an oil hole placed in each oil groove, simultaneously achieving high speed, high efficiency and high durability.From: ฿ 1,757.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN V NU-ROLL Series V-NRT-B, Metric DIN 2174
OSG
Enables High cutiing Speed tapping in Aluminum, Stainless Steel & Steel due to Cobalt HSS substrateFrom: ฿ 1,087.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 280.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
High quality tap and die sets to DIN standard for general engineering use. Metal CaseAvailable in M3 to M12 and M3 to M20 Size RangesFrom: ฿ 34,307.56 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
T-handles slide both ways for tighteningHardened & tempered split collet chucks for positive gripKnurled & hardened clamping nutSpring tension holds handle in desired positionIdeal for use in small spaces or where reach is requiredFrom: ฿ 1,101.36 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
■ The HP+RZ/HP-RZ roll taps are suitable for processing steel materials with a hardness of 35 HRC or lessand light alloys. These roll taps are recommended for high speed machining 20 to 50 m / min.
■Roll form processing of stainless steel and thermal refined materials up to 40 HRC are now possible.
■ The roll form tapping torque has been reduced by 20% or more, making it possible to significantlyimprove tool life compared with conventional roll form tap products.
■The HP+RZ/HP-RZ taps make it possible to use a water soluble cutting fluid.From: ฿ 775.40 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Zero Tap with Oil Hole Series OIL-S-XPF, Metric DIN 2174
OSG
Long tool life in Carbon and Alloy steels thanks to the high wear resistance and toughness of the Cobalt HSS substrate.From: ฿ 2,130.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO High Speed Steel Hand tap and drill set Tap Set
RS Pro
Specifications
Set Type = Threading Tap Set
Type = Hand tap and drill set
Number of Pieces = 29
Material = High Speed SteelFrom: ฿ 6,362.81 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN R-XPF Series R-XPF, JIS Form
OSG
Long tool life in wide range of steel such as mild steel, alloy steel, carbon steel, and stainless steel as well as aluminum alloy.From: ฿ 484.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
MISUMI
[Features]
·Used for thread forming that does not generate cutting chip
·Supports a wide range of work materials from general steel to non-ferrous alloys
·Excellent abrasion resistance and chip-weld resistance due to TiN coatingFrom: ฿ 1,219.35 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.From: ฿ 709.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.From: ฿ 584.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
UM Nu-Roll Tap for Ultla-small Diameter Threads_UM-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 1,259.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.From: ฿ 765.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holesFrom: ฿ 247.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.From: ฿ 3,540.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,356.16 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Collet Ratchet (Short & Long Reach)
RS Pro
Collet type with forward/lock/reverse operation ratchetIdeal for use in difficult to access areasPlated finishFrom: ฿ 2,469.79 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN R-XPF Series R-XPF, Metric DIN 2174
OSG
Long tool life in wide range of steel such as mild steel, alloy steel, carbon steel, and stainless steel as well as aluminum alloy.From: ฿ 535.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO High Speed Steel Spiral Flute Tap & Drill Set
RS Pro
Specifications
Set Type = Threading Tap Set
Type = Spiral Flute
Number of Pieces = 6
Material = High Speed SteelFrom: ฿ 2,839.52 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 766.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series VP New Roll, Short Screw Type VP-NRTS
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 758.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.From: ฿ 654.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holesFrom: ฿ 314.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.From: ฿ 5,627.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 959.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/20246 Piece Combined Drill and Tap Set
RS Pro
6 piece combined dril and tap setFeaturing sizes M3, M4, M5, M6, M8, M10Supplied in a plastic caseFrom: ฿ 4,133.65 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 7,761.79 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Set contains one of each tap and drill M3, M4, M5, M6, M8 and M10Housed in a plastic caseFrom: ฿ 4,910.73 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
The RS Pro thread repair kits include everything for repairing your damaged threads. The metric repair kit creates stronger internal threads in most metals, and helps regain the original thread size. • Repairs stripped or damaged internal threads• Different kits available to repairs threads from M2.5 to M10• No engineering experience needed• Protects tapped threads against wear and tearFrom: ฿ 6,498.48 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tap & Reamer Wrench (Bar Type)
RS Pro
Adjustable all steel tap/reamers with hardened and tempered ’V’ jaws for holding square/round shanksFrom: ฿ 1,504.68 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M8 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M8
Type = Straight Flute, Plug
Pitch = 1.25mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 835.60 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS Tap & Drill Set (917-2602)
RS Pro
Specifications
Set Type = Threading Tap Set
Number of Pieces = 14
Material = HSSFrom: ฿ 5,477.96 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips.
· Less inconsistent screw precision.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Suitable for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.From: ฿ 390.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.From: ฿ 987.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 788.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materialsFrom: ฿ 959.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT
OSG
V (composite multi-layer coating) achieves high durability.
Work material: General steel / stainless steel / aluminum / copper
Coating: Surface treatment for steelFrom: ฿ 1,060.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series V Coating for Thin Plate Use V-SS-NRT
OSG
Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.From: ฿ 813.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 247.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 853.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ R+V is coated forming tap for ferrous and nonferrousmaterials. Optimum coating suitable to thetapping condition.From: ฿ 705.88 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Dry Tapping, Coated_OL+RZ
YAMAWA MFG
■ The OL+RZ/OL-RZ roll taps have made it possible tapping without lubrication in the sizes M6 and smaller. These taps aredesigned for thin steel sheet screw threads or steel with a relatively short screw thread length.
■ Increased shank accuracy and an optimum lobe portion design produces a smooth thread forming action and the internal threadaccuracy is stabilized even under severe conditions.
■For blind hole tapping, please select the HP + RZ / HP-RZ tap series as an alternative item.From: ฿ 622.99 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Roll Taps for Non-Ferrous Materials_LS-N-RS
YAMAWA MFG
■ LS-N-RS is the long shank forming tap suitablefor non-ferrous materials such as aluminumcastings, aluminum diecasting and brass.From: ฿ 645.80 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Precision HSS taps with straight flutes.Suitable for machine or hand tappingBlue steam tempered finish reduces friction and produces a fine finish on the threadsFrom: ฿ 100.95 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024HSS Metric Taps Left Hand Thread -Straight Flute
RS Pro
High quality High Speed Steel tapsLeft Hand threadMetric coarse series threadStraight fluteSet of 3 (taper second and plug tap)Supplied in a polypropylene storage caseFrom: ฿ 1,029.27 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
High quality, high speed steel ISO diesSet contents: M3, M4, M5, M6, M8, M10, M12 dies dies and die-cast die holderFrom: ฿ 4,269.73 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/202422 Piece HSS Metric Tap & Drill Set
RS Pro
14 piece HSS tap set containing taper and bottom tap of each sizeTap sizes M3, M4, M5, M6, M8, M10, M127 piece HSS drill set fully ground with black finishDrill sizes 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mmTaps manufactured to ISO standardDrills manufactured to DIN338Supplied in a metal case with tap wrenchFrom: ฿ 11,028.35 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 10,903.31 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
ISO Metric (coarse) SetSet of 3 (taper, second and plug tap)Supplied in polypropylene caseStandardsISO metricFrom: ฿ 1,345.43 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN for Nickel Alloy Steels (Aerospace) Series WHR-NI-SFT, UNFJ DIN 2184-1
OSG
High Performance tap for Nickey Alloy Steels (Inconel, Waspalloy) used in Aerospace and Chemical Industries.From: ฿ 1,411.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS 3/8-16 Straight Flute Threading Tap, 70 mm Length
RS Pro
Specifications
Thread Size = 3/8-16
Type = Straight Flute
Thread Standard = UNC
Number of Pieces = 1
Hand/Machine Tap = Hand Tap
Shank Diameter = 7 mmFrom: ฿ 1,301.81 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M10 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M10
Type = Straight Flute, Plug
Pitch = 1.5mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 708.71 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M2.5 Spiral Point Threading Tap, 44.5 mm Length
RS Pro
Specifications
Thread Size = M2.5
Type = Spiral Point
Pitch = 0.45mm
Thread Standard = Metric
Number of Pieces = 1
Material = HSS
Shank Diameter = 2.8 mmFrom: ฿ 627.43 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M5 Hexagon Drive Tap Threading Tap, 35 mm Length
RS Pro
Specifications
Thread Size = M5
Type = Hexagon Drive Tap
Pitch = 0.8mm
Thread Standard = Metric
Number of Pieces = 1
Material = HSSFrom: ฿ 327.47 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M6 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M6
Type = Straight Flute, Plug
Pitch = 1.0mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 558.77 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A rise up type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
[Applications]
· Suitable for rolled threading of non-ferrous metals such as aluminum.
· For standard dimensions, it is used when the protrusion length is insufficient.From: ฿ 666.16 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.From: ฿ 430.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank for Taflet Steel TFSTL
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
[Applications]
· Ideal for roll threaded screw machining of mild steel and stainless steel with hardness of 20 HRC or less.
· For standard dimensions, it is convenient when the protrusion length is insufficient.From: ฿ 590.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A roll type tap that does not expel chips.
[Features]
· The TAFLET series uses workpiece plastic fluidity to raise screw threads and create female threads.
· It does not produce chips and provides stable screw accuracy.
· The fiber flow of the material is not interrupted and therefore the strength of the female threads is strong.
[Applications]
· Ideal for rolled threading of non-ferrous metals such as aluminum.From: ฿ 350.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.From: ฿ 1,100.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap V coated with Cutting Edge on Minor Dia. (EG-NRT)_V-EG-NRT
OSG
Even if the diameters of pilot holes vary due to bore cutting during forward operation, it does not over-roll, making management of the hole diameter easy. By selecting the pilot hole diameter, it is possible to remove broken ridges from female threads.From: ฿ 956.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.From: ฿ 485.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Long Shank for Steel LT-NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holesFrom: ฿ 591.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless Tap for Copper_CU-NRT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.From: ฿ 730.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals with Long Shank_LT-B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 604.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,333.81 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 853.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,145.70 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature C Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,924.84 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature C Coated Long
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 2,299.33 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature TiCN Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,924.84 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
IT-Toughlet Miniature TiCN Coated Long
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 2,299.33 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Cold-forming tap with correct chamfer without pitch and angle errors.From: ฿ 1,717.31 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.From: ฿ 2,281.00 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.From: ฿ 746.23 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Torqueless Roll Taps with Short Chamfer_SC-TL-RZ
YAMAWA MFG
■ High quality internal threading with fewer burrs canbe produced with better tool life.
■ Roll form processing into materials with low ductilityis now possible.
■Tool life with water soluble cutting fluid is increased.
■ The SC-TL-RZ offers high speed processing into:Stainless steel: SUS303, SUS304, SUS316, SUS440C ·Alloy steel: SCM420 · Carbon steel: S45C 〜 S50C ·Aluminum casting · Aluminum die castingFrom: ฿ 905.82 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ N+RZ/N-RZ are the forming taps suitable forferrous materials such as carbon steels, alloysteels, and normal steels.From: ฿ 375.98 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Miniature Threads_MS+RS
YAMAWA MFG
■ Improved tool rigidity from new blank shape that offers torsional strength and shank accuracy.
■ Markings that were on the shanks outside diameter have been transferred to the square part toimprove circularity.
■ New thread portion offers improvements in the accuracy of the "GS" class of internal thread tapping.From: ฿ 1,359.98 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Roll Taps for Steels_LS-N-RZ
YAMAWA MFG
■ LS-N-RZ is the long shank forming tap suitablefor ferrous materials such as carbon steels,alloy steels and normal steels.From: ฿ 858.47 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Thin Soft Structural Steel Sheets_R-Y
YAMAWA MFG
■ For tapping general fasteners made from suchthin steel sheets as SPC and SPH, and fromsuch soft steels as under SS400 and S20C.From: ฿ 288.69 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
■ N+RS/N-RS are the forming taps suitable fornon-ferrous materials such as aluminum castings,aluminum diecasting and brass.From: ฿ 377.53 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series, X Performer Long Shank LT-S-XPF
OSG
Compared with cutting taps, carbon steel/alloy steel has less chipping trouble and long-life machining is possible. It is especially useful for processing steel forged parts for automobiles.
[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]
[Coating Type] Other.From: ฿ 1,016.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Medium Hardness Carbon Steels_MHRZ-J
YAMAWA MFG
■Torque reduction is achieved from the new design and specifications.
■Tool life is dramatically improved with superb tool materials and coatings offering excellent wear resistance.
■Stable screw thread tapping in thermal refined material up to 35 HRC.
■The MHRZ-J roll form taps can be used with water soluble cutting fluid.From: ฿ 1,120.69 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Tap Coro Tap 400 TiN Coated (For blind and through holes, non-fluted)
SANDVIK
[Features]
· A high-productivity tap tool.
· Long tool life and excellent chip processing provide high stability.
· Rolling tap that does not emit chips.
· Taps are available for each work material, making selection easy.
[Applications]
· For blind hole or through hole machining.
· Work materials: Steel, stainless steel, aluminum alloy, nickel alloy.From: ฿ 2,177.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,975.00 Days to Ship:
14 Day(s)
14 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■Adopting the special form on tap's root, SURZ controls the minor diameter geometry of internal threads.
■Special lobe shape realizes low tapping torque.
■High efficiency can be obtained in thread forming of stainless steel parts.
■By adjusting bored hole size, you can adjust the minor diameter geometry of internal threads.From: ฿ 994.87 Days to Ship:
Same day
Same day
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | RS Pro | RS Pro | OSG | OSG | OSG | OSG | RS Pro | RS Pro | YAMAWA MFG | OSG | RS Pro | OSG | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | TANOI MFG | RS Pro | OSG | RS Pro | OSG | OSG | OSG | OSG | OSG | OSG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | OSG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | TANOI MFG | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | SANDVIK | YAMAWA MFG | YAMAWA MFG |
| Product Series | Fluteless Tap with Internal Coolant Supply (X Performer)_OIL-S-XPF | HSS Tap DIN Zero Tap with Oil Hole Series OIL-S-XPF, Metric DIN 2174 | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals_HL-B-NRT | Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type with long Shank_VP-LT-SC-NRT | Fluteless (Nu-Roll) Tap TiN coated with Long Shank_TIN-LT-NRT | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Grooveless Tap Series V Coating, Long Shank for Deep Holes V-LT-DH-NRT | HSS Tap DIN for Nickel Alloy Steels (Aerospace) Series WHR-NI-SFT, UNFJ DIN 2184-1 | RS PRO HSS 3/8-16 Straight Flute Threading Tap, 70 mm Length | Fluteless (Nu-Roll) Insert Screw Thread Tap for Non-Ferrous Metals with Long Shank_HL-LT-B-NRT | Fluteless (Nu-Roll) Tap V coated with Cutting Edge on Minor Dia. (EG-NRT)_V-EG-NRT | Grooveless Tap Series High-Speed Synchro Tap for Aluminum HS-AL-NRT | Fluteless (Nu-Roll) Tap for Non-Ferrous Metals with Long Shank_LT-B-NRT | Roll Tap Coro Tap 400 TiN Coated (For blind and through holes, non-fluted) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 18,519.36 Special Price On Sale Until 30/06/2024 | ฿ 4,870.55 Special Price On Sale Until 30/06/2024 | ฿ 623.00 | ฿ 1,757.00 | ฿ 1,087.00 | ฿ 280.00 | ฿ 34,307.56 Special Price On Sale Until 30/06/2024 | ฿ 1,101.36 Special Price On Sale Until 30/06/2024 | ฿ 775.40 | ฿ 2,130.00 | ฿ 6,362.81 Special Price On Sale Until 30/06/2024 | ฿ 484.00 | ฿ 1,219.35 | ฿ 709.00 | ฿ 584.00 | ฿ 1,259.00 | ฿ 765.00 | ฿ 247.00 | ฿ 3,540.00 | ฿ 1,356.16 | ฿ 2,469.79 Special Price On Sale Until 30/06/2024 | ฿ 535.00 | ฿ 2,839.52 Special Price On Sale Until 30/06/2024 | ฿ 766.00 | ฿ 758.00 | ฿ 654.00 | ฿ 314.00 | ฿ 5,627.00 | ฿ 959.00 | ฿ 4,133.65 Special Price On Sale Until 30/06/2024 | ฿ 7,761.79 Special Price On Sale Until 30/06/2024 | ฿ 4,910.73 Special Price On Sale Until 30/06/2024 | ฿ 6,498.48 Special Price On Sale Until 30/06/2024 | ฿ 1,504.68 Special Price On Sale Until 30/06/2024 | ฿ 835.60 Special Price On Sale Until 30/06/2024 | ฿ 5,477.96 Special Price On Sale Until 30/06/2024 | ฿ 390.00 | ฿ 987.00 | ฿ 788.00 | ฿ 959.00 | ฿ 1,060.00 | ฿ 813.00 | ฿ 247.00 | ฿ 853.83 | ฿ 705.88 | ฿ 622.99 | ฿ 645.80 | ฿ 100.95 Special Price On Sale Until 30/06/2024 | ฿ 1,029.27 Special Price On Sale Until 30/06/2024 | ฿ 4,269.73 Special Price On Sale Until 30/06/2024 | ฿ 11,028.35 Special Price On Sale Until 30/06/2024 | ฿ 10,903.31 Special Price On Sale Until 30/06/2024 | ฿ 1,345.43 Special Price On Sale Until 30/06/2024 | ฿ 1,411.00 | ฿ 1,301.81 Special Price On Sale Until 30/06/2024 | ฿ 708.71 Special Price On Sale Until 30/06/2024 | ฿ 627.43 Special Price On Sale Until 30/06/2024 | ฿ 327.47 Special Price On Sale Until 30/06/2024 | ฿ 558.77 Special Price On Sale Until 30/06/2024 | ฿ 666.16 | ฿ 430.00 | ฿ 590.00 | ฿ 350.00 | ฿ 1,100.00 | ฿ 956.00 | ฿ 485.00 | ฿ 591.00 | ฿ 730.00 | ฿ 604.00 | ฿ 1,333.81 | ฿ 853.83 | ฿ 1,145.70 | ฿ 1,924.84 | ฿ 2,299.33 | ฿ 1,924.84 | ฿ 2,299.33 | ฿ 1,717.31 | ฿ 2,281.00 | ฿ 746.23 | ฿ 905.82 | ฿ 375.98 | ฿ 1,359.98 | ฿ 858.47 | ฿ 288.69 | ฿ 377.53 | ฿ 1,016.00 | ฿ 1,120.69 | ฿ 2,177.00 | ฿ 1,975.00 | ฿ 994.87 |
| Days to Ship | Same day | 8 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | 8 Day(s) | Same day | Same day | 5 Day(s) | Same day | 5 Day(s) | Same day | Same day | Same day | 5 Day(s) | Same day | Same day | Same day | Same day | 8 Day(s) | 5 Day(s) | 8 Day(s) | Same day | 5 Day(s) | Same day | Same day | Same day | Same day | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | Same day | 8 Day(s) | 8 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | 20 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 31 Day(s) | 5 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 5 Day(s) | 31 Day(s) | 5 Day(s) | Same day | 19 Day(s) | 20 Day(s) | 20 Day(s) | 20 Day(s) | 19 Day(s) | Same day | 12 Day(s) | 15 Day(s) | 14 Day(s) | Same day |
| Screw size (Nominal) | - | - | No.2UN ～ M12 | M6 ～ M16 | - | M1 ～ M20 | - | - | No.10-32UNF ～ M20 | - | - | - | M3 ～ M10 | M3 ～ M12 | No.0UN ～ M20 | S0.5 ～ S0.9 | M1 ～ M45 | M3 ～ M5 | M3 ～ M12 | M2 ～ M20 | - | - | - | No.2UN ～ M3 | M1 ～ M2.6 | M1 ～ M20 | No.3UN ～ M16 | M3 ～ M12 | No.2UN ～ M6 | - | - | - | - | - | - | - | M1.4 ～ M10 | M3 ～ M12 | No.2UN ～ M6 | No.2UN ～ M12 | M2 ～ M6 | M1.4 ～ M6 | No.0UN ～ M6 | M1 ～ M10 | M1 ～ M6 | No.10 ～ M6 | M3 ～ M6 | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M10 | M1.4 ～ M10 | M3 ～ M10 | M1.4 ～ M6 | M3 ～ M12 | M3 ～ M12 | M1 ～ M6 | M3 ～ M10 | M3 ～ M12 | M3 ～ M10 | M2 | M1 ～ M10 | M1 ～ M10 | S0.5 ～ S0.9 | S0.5 ～ S0.9 | S0.5 ～ S0.9 | S0.5 ～ S0.9 | M4 ～ M8 | M16 | M2 ～ M20 | M1 ～ M6 | M1 ～ M20 | S0.9 | M3 ～ M10 | M2 ～ M8 | M1 ～ M10 | M3 ～ M12 | M6 ～ M14 | M8 ～ M12 | No.2 ～ No.6 | No.2 ～ M3 |
| Screw Types | - | - | Meter / unified | Meter | - | Meter | - | - | Meter / unified | - | - | - | Meter | Meter | Meter / unified | Miniature | Meter | Meter | Meter | Meter | - | - | - | Meter / unified | Meter | Meter | Meter / unified | Meter | Meter / unified | - | - | - | - | - | - | - | Meter | Meter | Meter / unified | Meter / unified | Meter | Meter | Meter / unified | Meter | Meter | Meter / unified | Meter | - | - | - | - | - | - | - | - | - | - | - | - | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Miniature | Miniature | Miniature | Miniature | Meter | Meter | Meter | Meter | Meter | Miniature | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / unified |
| work material | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | - | - | - | - | - | - | - | - | - | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Stainless steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | - | - | 0.25 ～ 56 | 1 ～ 1.75 | - | 0.25 ～ 2.5 | - | - | 0.25 ～ 1.75 | - | - | - | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.25 ～ 80 | .02 ～ 0.225 | 0.2 ～ 4.5 | 0.5 ～ 0.8 | 0.5 ～ 1.75 | 0.4 ～ 2.5 | - | - | - | 0.25 ～ 56 | 0.25 ～ 0.45 | 0.25 ～ 2.5 | 0.25 ～ 48 | 0.5 ～ 1.75 | 0.25 ～ 56 | - | - | - | - | - | - | - | 0.3 ～ 1.5 | 0.5 ～ 1.75 | 0.25 ～ 56 | 0.25 ～ 56 | 0.4 ～ 1 | 0.3 ～ 1 | 0.25 ～ 80 | 0.2 ～ 1.5 | 0.25 ～ 1 | 0.25 ～ 64 | 0.5 ～ 1 | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 1.5 | 0.3 ～ 1.5 | 0.5 ～ 1.5 | 0.3 ～ 1 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.25 ～ 1 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 0.4 | 0.2 ～ 1.5 | 0.2 ～ 1.5 | 0.125 ～ 0.225 | 0.125 ～ 0.225 | 0.125 ～ 0.225 | 0.125 ～ 0.225 | 0.7 ～ 1.25 | 2 | 0.4 ～ 2.5 | 0.2 ～ 1 | 0.25 ～ 2 | 0.225 | 0.5 ～ 1.5 | 0.4 ～ 1.25 | 0.25 ～ 1.5 | 0.5 ～ 1.75 | 1 ～ 1.5 | 1.25 ～ 1.75 | 0.45 ～ 0.79 | 0.2 ～ 56 |
| Tool Material Type | - | - | Powder high-speed steel | Vanadium High-Speed Steel | Cobalt HSS | High-speed steel | - | - | Powder high-speed steel | Cobalt HSS / Vanadium High-Speed Steel | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Carbide | High-speed steel | - | Vanadium High-Speed Steel | - | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Carbide | Powder high-speed steel | - | - | - | - | - | - | - | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | - | - | - | - | - | - | Powder high-speed steel | - | - | - | - | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | - | Powder high-speed steel | Powder high-speed steel |
| Tap Type | - | - | Roll tap | Roll tap | - | Roll tap | - | - | Roll tap | - | - | - | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | - | - | - | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | - | - | - | - | - | - | - | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | - | - | - | - | - | - | - | - | - | - | - | - | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap |
| Hole type | - | - | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | - | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | - | - | - | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | - | For through hole / For blind hole | For through hole | For through hole / For blind hole | - | - | - | - | - | - | For blind hole | - | - | - | - | - | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | - | - | - | - | - | - | - | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For through hole / For blind hole | For blind hole |
| Chamfer threads (Lcf) | - | - | 2P ～ 4P | 2P | - | 2P ～ 4P | - | - | 2P ～ 4P | - | - | - | 2P ～ 4P | 2P | 2P ～ 4P | 2P | 2P ～ 4P | 2.5P ～ 4P | 2P | 1P ～ 2P | - | - | - | 2P | 2P | 2P | 2P ～ 4P | 2P ～ 4P | 1P | - | - | - | - | - | - | - | 2P ～ 4P | 2P ～ 4P | 1P | 2P ～ 4P | 2P | 8P | 2.5P ～ 4P | 1P ～ 4P | 2P ～ 4P | 4P | 2P ～ 4P | - | - | - | - | - | - | - | - | - | - | - | - | 2P | 2P ～ 4P | 2P | 2P ～ 4P | 2P | 2P ～ 4P | 2P ～ 4P | 2P | 2P | 2P | 1P ～ 4P | 1P ～ 4P | 1P ～ 4P | 1P ～ 2P | 1P ～ 2P | 1P ～ 2P | 1P ～ 2P | 1P ～ 2P | - | - | 1P | 2P ～ 4P | 2P | 2P ～ 4P | 3P | 2P ～ 4P | - | 2P ～ 4P | - | 2P | 2P |
| Coating Type | - | - | TiCN | TiCN | - | TiN | - | - | TiCN | - | - | - | TiN | Non-Coated | TiN | CrN | TiCN | Non-Coated | Non-Coated | TiCN | - | - | - | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | TiCN | - | - | - | - | - | - | - | - | TiN | TiCN | TiCN | TiCN | TiCN | Non-Coated | Other | TiN | TiCN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Non-Coated | TiCN | Non-Coated | Non-Coated | CrN | Non-Coated | Other | TiCN | TiCN | Other | Other | TiCN | TiCN | TiCN | Non-Coated | TiN | TiCN | - | - | - | - | - | Other | - | - | TiCN | Other |
| Coating Y/N | - | - | Available | Available | - | Available | - | - | Available | - | - | - | Available | Available | Available | Available | Available | NA | NA | Available | - | - | - | Available | Available | Available | NA | NA | Available | - | - | - | - | - | - | - | NA | Available | Available | Available | Available | Available | NA | Available | Available | Available | NA | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | NA | NA | Available | Available | NA | NA | Available | NA | Available | Available | Available | Available | Available | Available | Available | Available | NA | Available | Available | NA | NA | NA | NA | NA | Available | Available | - | Available | Available |
| Overall Length (L)(mm) | - | - | 30 ～ 82 | 62 ～ 95 | 40 ～ 70 | 30 ～ 105 | - | - | 36 ～ 105 | 80 ～ 125 | - | 46 ～ 62 | 46 ～ 75 | 48 ～ 90 | 30 ～ 105 | 30 | 30 ～ 220 | 46 ～ 60 | 46 ～ 82 | 40 ～ 105 | - | 56 ～ 80 | - | 30 ～ 46 | 30 ～ 44 | 30 ～ 105 | 30 ～ 95 | 100 ～ 150 | 60 ～ 100 | - | - | - | - | - | - | - | 34 ～ 75 | 80 ～ 200 | 30 ～ 62 | 60 ～ 200 | 80 ～ 120 | 34 ～ 62 | 30 ～ 62 | 30 ～ 75 | 36 ～ 62 | 36 ～ 62 | 100 ～ 150 | - | - | - | - | - | - | 70 ～ 100 | - | - | - | - | - | 70 ～ 150 | 34 ～ 75 | 70 ～ 150 | 34 ～ 62 | 100 ～ 150 | 46 ～ 82 | 30 ～ 62 | 80 ～ 150 | 46 ～ 82 | 80 ～ 150 | 60 ～ 80 | 30 ～ 75 | 50 ～ 150 | 30 | 50 | 30 | 50 | 70 ～ 120 | 95 | 40 ～ 105 | 36 ～ 62 | 36 ～ 105 | 36 | 100 ～ 150 | 42 ～ 70 | 36 ～ 75 | 80 ～ 150 | 62 ～ 88 | 70 ～ 82 | 42 ～ 52 | 36 ～ 52 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?