(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน พฤษภาคม 2567 | Notice holiday in May 2024 > คลิก
Point Taps
[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNJ
- No.10-32UNF
- No.10-24UNC
- No.12UN
- No.2
- No.2UN
- No.3
- No.3UN
- No.4
- No.4UN
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- No.6UNJ
- S0.6
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- No.8-32UNC
- S0.9
- 1
- 1UN
- G1
- M1
- W1
- 1"1/2UN
- W1"1/2
- 1 1/4
- 1"1/4UN
- W1"1/4
- 1 1/8
- 1"1/8UN
- W1"1/8
- 1/2
- 1/2UN
- 1/2UNJ
- G1/2
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- W1"3/4
- 1"3/8UN
- W1"3/8
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- W1"5/8
- W1"7/8
- 1/8UN
- G1/8
- SM1/8
- W1/8
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- 2
- M2
- M2.0
- W2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- M3
- STI M3
- 3/4
- 3/4UN
- G3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- G3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/32
- SM3/32
- W3/32
- M3.5
- 4M
- M4
- M4.0
- M4
- STI M4
- M4.5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/8
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8W11
- 5/16
- 5/16UN
- 5/16UNJ
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- 6UN
- M6
- M6.0
- M6
- STI M6
- M7
- 7/8
- 7/8UN
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16
- 7/16UN
- 7/16UNJ
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/32
- W7/32
- 8UN
- M8
- M8.0
- M8
- STI M8
- M9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- 10UN
- M10
- M10.0
- M10
- STI M10
- M11
- 11/64
- SM11/64
- M12
- M12.0
- M12
- STI M12
- M13
- M14
- M14.0
- M14
- M15
- SM15/64
- M16
- M16.0
- M16
- M17
- M18
- M18
- M19
- M20
- M20
- M22
- M22
- M23
- M24
- M24
- M25
- M26
- M27
- M28
- M30
- M32
- M33
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
-
Screw Types
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 174 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/12/2024
Until 31/12/2024Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the wayFrom: ฿ 176.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.From: ฿ 552.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Carbon Steel Metric Tap & Die Set
RS Pro
High quality tap and die set to DIN standard for thread repair work and general engineering use. Taper, Second & Plug TapsTap wrenchDiestockScrewdriverPlastic CaseFrom: ฿ 18,519.36 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ The chips from the tap's cutting chamfer are pushed forward. This isoptimal for through hole tapping where there are no obstructions createdby the chip.
■Straight flutes are shallow so the taps strength is very high.From: ฿ 302.56 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.From: ฿ 1,000.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Metric Hexagon drive drill and tap set featuring popular sizes for hand or power tool use.From: ฿ 4,870.55 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 298.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Stainless Steels_SU+PO
YAMAWA MFG
■ The SU+PO/SU-PO taps are designed for stainless steel that causes work harden easily. The cuttinggeometry is also suited for tapping through holes in chromium steel and molybdenum steel.
■To prevent chip welding, the tap's surface is oxidized.From: ฿ 290.81 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
T-handles slide both ways for tighteningHardened & tempered split collet chucks for positive gripKnurled & hardened clamping nutSpring tension holds handle in desired positionIdeal for use in small spaces or where reach is requiredFrom: ฿ 1,101.36 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series With Oil Hole OIL-POT
OSG
Effective for sideways machining of through holes and deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tappingFrom: ฿ 550.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Point Tap for Through Holes 1015
GUHRING
[Features]
· JIS standard compliant tap for through holes.
· Supports a wide range of work materials from general steel to stainless steel.From: ฿ 662.41 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plus Series Spiral Pointed Taps_+PO
YAMAWA MFG
■ The +PO is a spiral pointed tap for through holetapping and is suitable for synchronous feedprocessing in middle to high tapping speed.From: ฿ 262.22 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-LH
YAMAWA MFG
■ The PO LH is a spiral pointed tap for left handthreads in through hole tapping.From: ฿ 510.95 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Deep Holes with Long Shank_EX-LT-DH-POT
OSG
The through hole has a particularly long tapping length and is suitable for work materials that are susceptible to seizure.
[Specifications]
[Shape] Point tap.
[Screw type] metric.
[Chamfer threads] 4 P.
[Work Material] Low-Carbon Steel (C Content of 0.25% or Less) / Medium-Carbon Steel (C Content 0.25 - 0.45%) / Alloy Steel (SCM) / Cast Steel (SC) / Thermoplastic (PVC, Nylon etc.)
[No. of Grooves] 3.
[Coating Type] Non.From: ฿ 739.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
High quality tap and die sets to DIN standard for general engineering use. Metal CaseAvailable in M3 to M12 and M3 to M20 Size RangesFrom: ฿ 34,307.56 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.From: ฿ 248.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.From: ฿ 237.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO High Speed Steel Hand tap and drill set Tap Set
RS Pro
Specifications
Set Type = Threading Tap Set
Type = Hand tap and drill set
Number of Pieces = 29
Material = High Speed SteelFrom: ฿ 6,362.81 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series V Coating V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tappingFrom: ฿ 576.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
For Pointed Tap for Titanium Alloy V-TI-POT
OSG
Enables processing with high durability, efficiency, and stability in titanium alloy (Ti-6Al-4V, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industriesFrom: ฿ 887.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.From: ฿ 688.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Deep Holes EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.From: ฿ 273.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for High Carbon Steels_HC+PO
YAMAWA MFG
■ The HC+PO/HC-PO is a spiral pointed tap suitable for the tapping medium and high hardnessworkpiece materials up to 35 HRC in high carbon steel such as S55C.From: ฿ 303.03 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Collet Ratchet (Short & Long Reach)
RS Pro
Collet type with forward/lock/reverse operation ratchetIdeal for use in difficult to access areasPlated finishFrom: ฿ 2,469.79 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Thin Plate EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimumFrom: ฿ 212.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
SKC
[Features]
·Steam oxide treatment for excellent rust prevention, corrosion resistance, and durability
[Applications]
·Plating processing, heat treatment processingFrom: ฿ 731.56 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps, Oxidized_PO-OX
YAMAWA MFG
■ The +PO is a spiral pointed tap for through holetapping and is suitable for synchronous feedprocessing in middle to high thread processingof soft steel materials whose chips easily weldto the taps thread such as low carbon steels.From: ฿ 241.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Pointed Taps_LS-PO
YAMAWA MFG
■ Long shank spiral pointed taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 594.61 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Short Spiral Pointed Taps for Deep Hole Use_S-PO
YAMAWA MFG
■ S-PO is the spiral pointed tap having shortthread portion which reduces friction and makessmooth coolant supply, and is suitable for suchdeep holes which are deeper than 2.5 times ofthe nominal dia.From: ฿ 366.42 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide taps for ultra hard materials_UH-CT
YAMAWA MFG
■ The UH-CT is designed for tapping SKD and pre-hardened steel50HRC to 63HRC (Max 63).
■ It is produced from a ultra fine grain cemented carbide with superior abrasionresistance and impact resistance.
■The UH-CT has an improved shank roundness accuracy.
■ Recommended tapping length is "Major diameter size x 1.5" or less 5P chamfer for better tool life.
■For the bored hole diameter, the maximum minor diameter of a 6H internal thread diameter maximum value is recommended.From: ฿ 3,222.86 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 220.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
[Features]
·High-speed steel uncoated spiral point tap
·Can be used for through hole machining
·Effective for work materials with continuous cutting chip such as carbon steel and steel alloyFrom: ฿ 1,128.23 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for Stainless Steel EX-SUS-POT
OSG
With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem. Besides stainless steel, it is also suitable for various heat resistant steels and strong nickel chrome manganese steel.From: ฿ 361.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Insert Screw Thread Tap_EX-HL-POT
OSG
Used for thread tapping of female threads by inserting the insert (helical coil) into a through holeFrom: ฿ 509.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves
OSG
Exerts power in Ni-base heat-resistant alloy (Inconel® 718, etc.) of 40 to 45 HRC aged after undergoing a solution heat treatment, used in such fields as aircraft, aerospace, and chemical industriesFrom: ฿ 527.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.From: ฿ 518.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.From: ฿ 221.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OSG
[Specifications]
· Shape: Point tap
· Screw type: pipe parallel
· Chamfer threads: 4 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy ) [◎] / Alloy Steel (SCM) [◎] / Cast Steel (SC) [◎] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]From: ฿ 571.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TRUSCO
[Features]
· High-speed tapping is possible.
· Oxidization treated.
· Work materials: General steel, low-medium carbon steel, alloy steel.
[Applications]
· For through hole finish work.From: ฿ 231.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 610.61 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B
YAMAWA MFG
■ The HFICT-P is a carbide tap capable of ultra high speed tapping. It has a side coolant holes for internal lubrication distributionor mist applications. It can lower temperature by cooling in a dry tapping application where necessary with an air blast. It issuitable for though hole tapping in materials such as cast irons and brass castings.From: ฿ 5,690.94 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Pointed Taps with Long Neck_LS-PO-K
YAMAWA MFG
■ Long shank spiral pointed taps with long neckfor tapping threads in deep holes that cannot bereached with a standard overall length. The longneck enables deep hole tapping.From: ฿ 903.29 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/20246 Piece Combined Drill and Tap Set
RS Pro
6 piece combined dril and tap setFeaturing sizes M3, M4, M5, M6, M8, M10Supplied in a plastic caseFrom: ฿ 4,133.65 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 7,761.79 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Set contains one of each tap and drill M3, M4, M5, M6, M8 and M10Housed in a plastic caseFrom: ฿ 4,910.73 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
The RS Pro thread repair kits include everything for repairing your damaged threads. The metric repair kit creates stronger internal threads in most metals, and helps regain the original thread size. • Repairs stripped or damaged internal threads• Different kits available to repairs threads from M2.5 to M10• No engineering experience needed• Protects tapped threads against wear and tearFrom: ฿ 6,498.48 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Tap & Reamer Wrench (Bar Type)
RS Pro
Adjustable all steel tap/reamers with hardened and tempered ’V’ jaws for holding square/round shanksFrom: ฿ 1,504.68 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, Metric DIN 374
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 843.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN General & SUS Application Series VA-POT, UNJF DIN 2184-1
OSG
General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.From: ฿ 961.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 371
OSG
General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.From: ฿ 550.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO High Speed Steel Spiral Flute Tap & Drill Set
RS Pro
Specifications
Set Type = Threading Tap Set
Type = Spiral Flute
Number of Pieces = 6
Material = High Speed SteelFrom: ฿ 2,839.52 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M8 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M8
Type = Straight Flute, Plug
Pitch = 1.25mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 835.60 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS Tap & Drill Set (917-2602)
RS Pro
Specifications
Set Type = Threading Tap Set
Number of Pieces = 14
Material = HSSFrom: ฿ 5,477.96 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap TiN coated with Long Shank_TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.From: ฿ 892.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointed Tap V coated with Long Shank_V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tappingFrom: ฿ 914.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.From: ฿ 439.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank・General Application_EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.From: ฿ 423.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.From: ฿ 845.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.From: ฿ 1,072.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
WALTER PROTOTYP
Suitable for high precision through-hole thread processing up to screw depths of 3 x D. Suitable for long chipping materials of 200-1,000 N/mm² and up to 32 HRC.From: ฿ 997.09 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Machine Nut Tap, for Metric Coarse Thread (Angle: 60°)
SKC
[Applications]
Can be used to machine nuts.
[Features]
For right-hand coarse threads.From: ฿ 876.80 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 463.00 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
■ Adopting the optimum coating for the tappingcondition.From: ฿ 657.11 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 971.58 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,228.13 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Spiral Pointed Taps, Coated_LS-PO-V
YAMAWA MFG
■ Long shank coated spiral fluted taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 1,051.55 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Hard Materials_EH-CT
YAMAWA MFG
■Ideal for high hardness steel tapping from 45 to 55 HRC. For hot mold SKS 3 and SKD 11.
■The ultra fine grain cemented carbide is superior in abrasion resistance and impact resistance.
■Better concentricity improves the accuracy of the entire tap and roundness of the shank.
■ Recommended tapping length is "Major diameter size x 1.5" or less 5P chamfer for better tool life.
■For the bored hole diameter, the maximum minor diameter of a 6H internal thread diameter maximum value is recommended.From: ฿ 3,324.19 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO
YAMAWA MFG
■ The EH-PO taps are suitable for high hardness materials from 30 to 45 HRC in high carbon steel, alloy steel forging, temperingmaterial and mold materials.
■ Tool life is greatly improved using a cutting edge shape suitable for difficult to machine materials. The tap exhibits excellent wear resistance.
■For through hole applications.From: ฿ 366.98 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.From: ฿ 580.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for General Purpose_IPO
YAMAWA MFG
■ IPO is the best tap for through holes to be used with lowercutting speed on drilling machines.
■ Use for threading of the iron（SPC or SS400） products usedin our daily life.
■ Surface treated. Oxidization, the most suitable surfacetreatment for iron products.
■ Suitable for internal threadcutting in small quantity, such astapping of test pieces.
■ Having spiral points in thechamfer portion, IPO ejects chipsforward in the tapping directionand is for through hole use.From: ฿ 277.25 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
Precision HSS taps with straight flutes.Suitable for machine or hand tappingBlue steam tempered finish reduces friction and produces a fine finish on the threadsFrom: ฿ 100.95 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024HSS Metric Taps Left Hand Thread -Straight Flute
RS Pro
High quality High Speed Steel tapsLeft Hand threadMetric coarse series threadStraight fluteSet of 3 (taper second and plug tap)Supplied in a polypropylene storage caseFrom: ฿ 1,029.27 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
High quality, high speed steel ISO diesSet contents: M3, M4, M5, M6, M8, M10, M12 dies dies and die-cast die holderFrom: ฿ 4,269.73 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/202422 Piece HSS Metric Tap & Drill Set
RS Pro
14 piece HSS tap set containing taper and bottom tap of each sizeTap sizes M3, M4, M5, M6, M8, M10, M127 piece HSS drill set fully ground with black finishDrill sizes 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mmTaps manufactured to ISO standardDrills manufactured to DIN338Supplied in a metal case with tap wrenchFrom: ฿ 11,028.35 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 10,903.31 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
ISO Metric (coarse) SetSet of 3 (taper, second and plug tap)Supplied in polypropylene caseStandardsISO metricFrom: ฿ 1,345.43 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, UNC DIN 2184-1
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 787.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap High Performance Series A-POT, UNF DIN 2184-1
OSG
Applicable for various type of work material group and wide range of cutting condition. Consistent performance is available due to the newly developed flute form which improves chip disposal.From: ฿ 1,096.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 376
OSG
General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.From: ฿ 909.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN General & SUS Application Series VA-POT, UNF DIN 2184-1
OSG
General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.From: ฿ 783.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN General Series POT, Metric DIN 371
OSG
General application tap in DIN series. Suitable for carbon steel, alloy steel, mild steel, and stainless steel in through hole application.From: ฿ 338.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374
OSG
Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.From: ฿ 1,273.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 376
OSG
Designed specifically for through holes in connection rods and wheel hubs with tapping speed up to 40m/min. This is also suitable for Forged Steel automotive components.From: ฿ 1,273.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 701.57 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS 3/8-16 Straight Flute Threading Tap, 70 mm Length
RS Pro
Specifications
Thread Size = 3/8-16
Type = Straight Flute
Thread Standard = UNC
Number of Pieces = 1
Hand/Machine Tap = Hand Tap
Shank Diameter = 7 mmFrom: ฿ 1,301.81 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M10 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M10
Type = Straight Flute, Plug
Pitch = 1.5mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 708.71 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M2.5 Spiral Point Threading Tap, 44.5 mm Length
RS Pro
Specifications
Thread Size = M2.5
Type = Spiral Point
Pitch = 0.45mm
Thread Standard = Metric
Number of Pieces = 1
Material = HSS
Shank Diameter = 2.8 mmFrom: ฿ 627.43 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M5 Hexagon Drive Tap Threading Tap, 35 mm Length
RS Pro
Specifications
Thread Size = M5
Type = Hexagon Drive Tap
Pitch = 0.8mm
Thread Standard = Metric
Number of Pieces = 1
Material = HSSFrom: ฿ 327.47 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO HSS M6 Straight Flute, Plug Threading Tap
RS Pro
Specifications
Thread Size = M6
Type = Straight Flute, Plug
Pitch = 1.0mm
Thread Standard = Metric
Number of Pieces = 1
Hand/Machine Tap = Hand TapFrom: ฿ 558.77 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]
·Can be used for through hole machining
·It can handle a wide range of work materials, but is especially effective for tapping steel alloy and stainless steel, etc.
·Excellent abrasion resistance and chip-weld resistance due to TiN coating
·Long shank type ideal for drilling deep thread holes (G-LS-POT)From: ฿ 352.00 Days to Ship:
Same day
Same day
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 31/12/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | |
| Brand | OSG | OSG | RS Pro | YAMAWA MFG | OSG | RS Pro | OSG | YAMAWA MFG | RS Pro | OSG | GUHRING | YAMAWA MFG | YAMAWA MFG | OSG | RS Pro | MISUMI | OSG | RS Pro | OSG | OSG | OSG | OSG | YAMAWA MFG | RS Pro | OSG | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | TRUSCO | SKC | YAMAWA MFG | YAMAWA MFG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | OSG | OSG | OSG | RS Pro | RS Pro | RS Pro | OSG | OSG | OSG | OSG | OSG | OSG | WALTER PROTOTYP | SKC | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | NACHI(FUJIKOSHI) | YAMAWA MFG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | RS Pro | RS Pro | RS Pro | RS Pro | RS Pro | MISUMI |
| Product Series | Spiral Point Tap, Ni-Based Super Heat Resistant Alloys, NI-POT-M12/-NO10, 3 Grooves | Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B | HSS Tap DIN General & SUS Application Series VA-POT, UNJF DIN 2184-1 | HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 371 | HSS Tap DIN General & SUS Application Series VA-POT, Metric DIN 376 | HSS Tap DIN General & SUS Application Series VA-POT, UNF DIN 2184-1 | HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 374 | HSS Tap DIN Automobile Steel Component Series WXL-CPM-RFT, Metric DIN 376 | RS PRO HSS 3/8-16 Straight Flute Threading Tap, 70 mm Length | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 176.00 Special Price On Sale Until 31/12/2024 | ฿ 552.00 | ฿ 18,519.36 Special Price On Sale Until 30/06/2024 | ฿ 302.56 | ฿ 1,000.00 | ฿ 4,870.55 Special Price On Sale Until 30/06/2024 | ฿ 298.00 | ฿ 290.81 | ฿ 1,101.36 Special Price On Sale Until 30/06/2024 | ฿ 550.00 | ฿ 662.41 | ฿ 262.22 | ฿ 510.95 | ฿ 739.00 | ฿ 34,307.56 Special Price On Sale Until 30/06/2024 | ฿ 248.00 | ฿ 237.00 | ฿ 6,362.81 Special Price On Sale Until 30/06/2024 | ฿ 576.00 | ฿ 887.00 | ฿ 688.00 | ฿ 273.00 | ฿ 303.03 | ฿ 2,469.79 Special Price On Sale Until 30/06/2024 | ฿ 212.00 | ฿ 731.56 | ฿ 241.00 | ฿ 594.61 | ฿ 366.42 | ฿ 3,222.86 | ฿ 220.00 | ฿ 1,128.23 | ฿ 361.00 | ฿ 509.00 | ฿ 527.00 | ฿ 518.00 | ฿ 221.00 | ฿ 571.00 | ฿ 231.00 | ฿ 610.61 | ฿ 5,690.94 | ฿ 903.29 | ฿ 4,133.65 Special Price On Sale Until 30/06/2024 | ฿ 7,761.79 Special Price On Sale Until 30/06/2024 | ฿ 4,910.73 Special Price On Sale Until 30/06/2024 | ฿ 6,498.48 Special Price On Sale Until 30/06/2024 | ฿ 1,504.68 Special Price On Sale Until 30/06/2024 | ฿ 843.00 | ฿ 961.00 | ฿ 550.00 | ฿ 2,839.52 Special Price On Sale Until 30/06/2024 | ฿ 835.60 Special Price On Sale Until 30/06/2024 | ฿ 5,477.96 Special Price On Sale Until 30/06/2024 | ฿ 892.00 | ฿ 914.00 | ฿ 439.00 | ฿ 423.00 | ฿ 845.00 | ฿ 1,072.00 | ฿ 997.09 | ฿ 876.80 | ฿ 463.00 | ฿ 657.11 | ฿ 971.58 | ฿ 1,228.13 | ฿ 1,051.55 | ฿ 3,324.19 | ฿ 366.98 | ฿ 580.00 | ฿ 277.25 | ฿ 100.95 Special Price On Sale Until 30/06/2024 | ฿ 1,029.27 Special Price On Sale Until 30/06/2024 | ฿ 4,269.73 Special Price On Sale Until 30/06/2024 | ฿ 11,028.35 Special Price On Sale Until 30/06/2024 | ฿ 10,903.31 Special Price On Sale Until 30/06/2024 | ฿ 1,345.43 Special Price On Sale Until 30/06/2024 | ฿ 787.00 | ฿ 1,096.00 | ฿ 909.00 | ฿ 783.00 | ฿ 338.00 | ฿ 1,273.00 | ฿ 1,273.00 | ฿ 701.57 | ฿ 1,301.81 Special Price On Sale Until 30/06/2024 | ฿ 708.71 Special Price On Sale Until 30/06/2024 | ฿ 627.43 Special Price On Sale Until 30/06/2024 | ฿ 327.47 Special Price On Sale Until 30/06/2024 | ฿ 558.77 Special Price On Sale Until 30/06/2024 | ฿ 352.00 |
| Days to Ship | Same day | Same day | Same day | Same day | Same day | 8 Day(s) | Same day | Same day | Same day | 5 Day(s) | 5 Day(s) | Same day | 1 Day(s) | Same day | 8 Day(s) | Same day | Same day | Same day | Same day | 5 Day(s) | Same day | Same day | Same day | 8 Day(s) | Same day | 31 Day(s) | 10 Day(s) | Same day | 1 Day(s) | Same day | 5 Day(s) | Same day | 5 Day(s) | Same day | 5 Day(s) | Same day | Same day | Same day | Same day | 31 Day(s) | 19 Day(s) | 20 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) | Same day | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 10 Day(s) | 31 Day(s) | 31 Day(s) | Same day | 1 Day(s) | 1 Day(s) | 5 Day(s) | 15 Day(s) | Same day | 5 Day(s) | 1 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 10 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | 8 Day(s) | Same day |
| Screw size (Nominal) | No.0UN ～ M48 | No.10-32UNF ～ M24 | - | No.0 ～ M40 | M2 ～ M24 | - | M1.4 ～ M48 | No.10 ～ M42 | - | M6 ～ M30 | M2 ～ M20 | M3 ～ M6 | 1/4-20UNC ～ M30 | M3 ～ M24 | - | M2 ～ M24 | M1.4 ～ M42 | - | M3 ～ M12 | No.10UNJ ～ M12 | M3 ～ M14 | No.10UN ～ M42 | M1.4 ～ M24 | - | M2 ～ M12 | M6 | M1.4 ～ M42 | 1 ～ M30 | M2 ～ M42 | M2 ～ M20 | M2 ～ M30 | M2 ～ M12 | No.10UN ～ 7/16UN | M3 ～ M12 | No.10UNJ ～ M12 | M1.4 ～ M42 | M2 ～ M42 | G1 ～ G3/8 | M3 ～ M16 | M6 ～ M33 | M6 ～ M12 | M3 ～ M6 | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M24 | M6 | M2 ～ M6 | W1 ～ M36 | M3 ～ M14 | M3 ～ M30 | M3 ～ M5 | M4 ～ M5 | M2 ～ M20 | M3 ～ M12 | M2.5 ～ M30 | S0.6 ～ S0.9 | M3 ～ M12 | M3 ～ M12 | M3 ～ M24 | M1.4 ～ M24 | M4 ～ M6 | - | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M16 | - | - | - | - | - | M3 ～ M10 |
| Screw Types | Meter / unified / Whitworth / Sewing Machine | Meter / unified | - | Meter / unified / Whitworth / Sewing Machine | Meter | - | Meter | Meter / unified / Whitworth | - | Meter | Meter | Meter | Meter / unified / Whitworth | Meter | - | Meter | Meter | - | Meter | Meter / unified | Meter | Meter / unified | Meter | - | Meter | Meter | Meter | Meter / unified / Whitworth | Meter | Meter | Meter | Meter | unified / Whitworth | Meter | Meter / unified | Meter | Meter | Parallel for Pipes | Meter | Meter | Meter | Meter | - | - | - | - | - | - | - | - | - | - | - | Meter | Meter | Meter | Meter / Whitworth | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Miniature | Meter | Meter | Meter | Meter | Meter | - | - | - | - | - | - | - | - | - | - | - | - | - | Meter | - | - | - | - | - | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | - | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Titanium Alloy (Ti-6Al-4V, etc)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○/◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○/◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Nickel-based alloy (Inconel, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | - | - | - | - | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Steel casting (SC)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | Stainless steel (SUS)[○] | - | - | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 0.25 ～ 3 | - | 0.25 ～ 80 | 0.25 ～ 3 | - | 0.3 ～ 5 | 0.3 ～ 56 | - | 1 ～ 3.5 | 0.4 ～ 2.5 | 0.5 ～ 1 | 0.5 ～ 3.5 | 0.5 ～ 3 | - | 0.4 ～ 3 | 0.3 ～ 4.5 | - | 0.5 ～ 1.25 | 0.5 ～ 40 | 0.5 ～ 2 | 0.4 ～ 48 | 0.3 ～ 3 | - | 0.4 ～ 1.75 | 1 | 0.3 ～ 4.5 | 0.4 ～ 24 | 0.4 ～ 4.5 | 0.4 ～ 2.5 | 0.4 ～ 3.5 | 0.4 ～ 1.75 | 8 ～ 48 | 0.5 ～ 1.75 | 0.5 ～ 40 | 0.3 ～ 4.5 | 0.4 ～ 4.5 | 11 ～ 28 | 0.5 ～ 2 | 0.75 ～ 2 | 1 ～ 1.75 | 0.5 ～ 1 | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 3 | 1 | 0.4 ～ 1 | 0.4 ～ 20 | 0.5 ～ 2 | 0.5 ～ 3.5 | 0.5 ～ 0.8 | 0.7 ～ 0.8 | 0.4 ～ 2.5 | 0.5 ～ 1.75 | 0.45 ～ 3 | 0.15 ～ 0.225 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.25 ～ 3 | 0.7 ～ 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 1.5 |
| Tool Material Type | Vanadium High-Speed Steel | Powder high-speed steel | - | High-speed steel | Powder high-speed steel | - | Powder high-speed steel | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | - | Cobalt HSS | Vanadium High-Speed Steel | - | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | - | Vanadium High-Speed Steel | - | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | Carbide | High-speed steel | - | - | - | - | - | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | - | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Cobalt HSS | High-speed steel | High-speed steel | - | - | - | - | - | - | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | - | - | - | - | - | Vanadium High-Speed Steel |
| Tap Type | Point tap | Point tap | - | Point tap | Point tap | - | Point tap | Point tap | - | Point tap | Point tap | Point tap | Point tap | Point tap | - | Point tap | Point tap | - | Point tap | Point tap | Point tap | Point tap | Point tap | - | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | - | - | - | - | - | - | - | - | - | - | - | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | - | - | - | - | - | - | - | - | - | - | - | - | - | Point tap | - | - | - | - | - | Point tap |
| Hole type | For through hole | For through hole | - | For through hole | For through hole | - | For through hole | For through hole | - | For through hole | For through hole | For through hole | For through hole | For through hole | - | For through hole | For through hole | - | For through hole | For through hole | For through hole | For through hole | For through hole | - | For through hole | - | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | For blind hole | For through hole | - | - | - | - | - | For through hole | For through hole | For through hole | - | - | - | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | For through hole | For through hole | - | - | - | - | - | - | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | - | - | - | - | For through hole |
| Chamfer threads (Lcf) | 5P | 5P | - | 5P | 5P | - | 5P | 5P | - | 4P | - | 5P | 5P | 4P | - | 5P | 4P | - | 5P | 5P | 6P | 4P | 5P | - | 5P | - | 5P | 5P | 5P | 5P | 5 | 5P | 4P | 5P | 5P | 5P | 5P | 4P | 5P | - | 2.5P | 4.5P | - | - | - | - | - | - | - | - | - | - | - | 5P | 5P | 6P | 5P | 5P | 6P | - | - | - | 5P | 24P ～ 31P | 3P | 5P | 5P | 4.5P | 5 | 5P | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5P |
| Coating Type | Non-Coated | Other | - | - | Other | - | Non-Coated | - | - | Non-Coated | TiN | - | - | Non-Coated | - | Non-Coated | Non-Coated | - | TiCN | TiCN | TiN | Non-Coated | - | - | Non-Coated | - | - | - | - | TiAlN | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | - | - | TiAlN | - | - | - | - | - | - | - | - | - | - | - | - | TiN | TiCN | Non-Coated | Non-Coated | TiN | TiN | TiN | - | Non-Coated | TiN | - | - | TiN | TiAlN | - | TiCN | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | TiN |
| Coating Y/N | NA | Available | - | NA | Available | - | NA | NA | - | NA | Available | NA | NA | NA | - | NA | NA | - | Available | Available | Available | NA | NA | - | NA | - | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | - | - | Available | NA | - | - | - | - | - | - | - | - | - | - | - | Available | Available | NA | NA | Available | Available | Available | - | NA | Available | NA | NA | Available | Available | NA | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available |
| Overall Length (L)(mm) | 30 ～ 185 | 34 ～ 120 | - | 36 ～ 195 | 80 ～ 200 | - | 34 ～ 185 | 36 ～ 175 | - | 80 ～ 250 | 40 ～ 105 | 46 ～ 62 | 46 ～ 135 | 120 ～ 200 | - | 40 ～ 120 | 34 ～ 175 | - | 46 ～ 82 | 46 ～ 85 | 46 ～ 88 | 40 ～ 175 | 36 ～ 120 | - | 40 ～ 82 | 62 | 36 ～ 175 | 70 ～ 250 | 42 ～ 175 | 40 ～ 105 | 40 ～ 135 | 40 ～ 82 | 44 ～ 125 | 48 ～ 90 | 46 ～ 85 | 34 ～ 175 | 40 ～ 175 | 55 ～ 95 | 46 ～ 95 | - | 62 ～ 82 | 100 ～ 150 | - | - | - | - | - | 80 ～ 140 | 70 ～ 100 | 45 ～ 100 | - | - | - | 100 ～ 200 | 100 | 40 ～ 62 | 80 ～ 300 | 46 ～ 88 | 100 ～ 200 | 46 ～ 60 | 100 ～ 110 | 40 ～ 105 | 46 ～ 82 | 85 ～ 280 | 36 | 100 ～ 150 | 46 ～ 82 | 46 ～ 120 | 34 ～ 120 | 52 ～ 62 | - | - | - | - | - | - | 56 ～ 160 | 56 ～ 140 | 110 ～ 200 | 56 ～ 125 | 56 ～ 100 | 90 ～ 110 | 100 ～ 125 | 56 ～ 110 | - | - | - | - | - | 46 ～ 150 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?