(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- การยกเลิกจำหน่ายสินค้าประเภทอุปกรณ์นิวเมติกส์ (Pneumatic equipment) รุ่น “Economy Series” | Notice of End of Sales for Economy Series Pneumatic Equipment Category > คลิก
Hand Taps
[What is a hand tap?]
It is the most versatile cutting tap, usable for both "blind holes and through holes", with straight grooves taking into consideration storage of chips. It is mainly used for thread cutting in tapping drilling machines and tap handles. Tap types include front (1, 9 P) tap, middle (2, 5 P) tap, and upper (3, 1.5 P) tap depending on the length (number of teeth) of the biting part. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.2
- No.2UN
- No.3
- No.3UN
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- No.6-32UNC
- No.8
- No.8UN
- No.8-32UNC
- 1
- 1UN
- 1UNS
- G1
- M1
- M1.0
- No1UN
- PS 1
- UNC1
- UNF1
- W1
- 1"1/2U
- 1"1/2UN
- BSF1"1/2
- PS 1 1/2
- W1"1/2
- 1"1/4U
- 1"1/4UN
- PS 1 1/4
- W1"1/4
- 1"1/8U
- 1"1/8UN
- W1"1/8
- 1"1/16U
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- PS 1/2
- SM1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- 1/2W12
- 1"3/4U
- 1"3/4UN
- BSF1"3/4
- W1"3/4
- 1"3/8U
- 1"3/8UN
- BSF1"3/8
- W1"3/8
- 1"3/16U
- 1"3/16UN
- 1/4
- 1/4UN
- G1/4
- PS 1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- 1"5/8U
- 1"5/8UN
- BSF1"5/8
- W1"5/8
- 1"5/16U
- 1"5/16UN
- 1"7/8UN
- BSF1"7/8
- W1"7/8
- 1 7/16
- 1/8
- 1/8UN
- 1/8 BSP
- G1/8
- PS 1/8
- SM1/8
- W1/8
- 1 9/16
- W1/16
- M1.2
- 1.29
- 1.37
- M1.4
- 1.45
- M1.6
- M1.7
- M1.8
- 2U
- 2UN
- BSF2
- M2
- M2.0
- No2UN
- W2
- 2"1/2UN
- W2"1/2
- 2"1/4UN
- BSF2"1/4
- W2"1/4
- 2"3/4UN
- W2"3/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3UN
- M3
- M3.0
- No3UN
- W3
- 3"1/2UN
- 3/4
- 3/4UN
- G3/4
- PS 3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- PS 3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/16UN
- SM3/16
- W3/16
- SM3/32
- W3/32
- M3.5
- 4UN
- M4
- M4.0
- No4UN
- M4.5
- 5
- M5
- M5.0
- No5UN
- 5/8
- 5/8UN
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16
- 5/16UN
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- 5/32UN
- W5/32
- M5.5
- 6
- M6
- M6.0
- No6UN
- W6
- W6.8
- M7
- W7
- 7/8
- 7/8UN
- UNC7/8
- UNF7/8
- W7/8
- W"7/8
- 7/16
- 7/16UN
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- 7/32UN
- SM7/32
- W7/32
- 8
- M8
- No8UN
- W8
- 9
- M9
- 9/16
- 9/16UN
- W9/16
- SM9/32
- 9/64
- SM9/64
- M9.5
- W9.5
- W9.8
- 10
- M10
- No10UN
- W10
- 11
- M11
- W11
- 11/16
- W11/16
- SM11/32
- 11/64
- 12
- M12
- No12UN
- W12
- W12.5
- 13
- M13
- W13
- W13/16
- W13.5
- W13.8
- M14
- W14
- 15
- M15
- W15
- W15/16
- SM15/64
- 16
- M16
- W16
- 17
- M17
- W17
- M18
- W18
- 19
- M19
- W19
- 20
- M20
- W20
- W20.32
- M21
- W21
- 22
- M22
- W22
- M23
- W23
- M24
- W24
- 25
- M25
- W25
- M26
- W26
- M27
- W27
- 28
- M28
- W28
- W29
- M30
- W30
- 31
- 31/32
- M32
- W32
- M33
- W33
- M34
- W34
- M35
- W35
- 36
- M36
- W36
- M37
- M38
- W38
- 39
- M39
- W39
- M40
- W40
- 42
- M42
- W42
- W44
- M45
- W45
- M46
- M48
- W48
- M50
- W50
- M52
- W52
- W54
- M55
- W55
- M56
- W56
- M58
- M60
- W60
- M62
- W62
- M64
- M65
- W65
- M68
- M70
- W70
- M72
- M75
- W75
- M76
- M80
- M85
- M90
- M95
- M100
-
Screw Types
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 175 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatibleFrom: ฿ 84.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025YAMAWA MFG
■ Suitable for workpiece materials where the chips are powdery or where the chips are produced as a small curl.
■The cutting edge strength is high.
■It is easy to resharpen.From: ฿ 273.49 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
■ The SU-HT is a hand tap suitable for machining of stainless steel, chromium steel, molybdenum steel.These materials have a tendency to work harden easily.
■To prevent welding, the taps surface is oxidized.From: ฿ 257.56 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Tap for Stainless Steels_EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.From: ฿ 267.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】
TRUSCO
A high-speed steel (HSS-E) tap set.
[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.From: ฿ 656.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
[Features]
·Carbide uncoated type hand tap
·Can be used for both blind holes and through holes
·Suitable for mass production tapping of various cast ironFrom: ฿ 1,084.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
■The HT LH is a hand tap for left thread tapping.From: ฿ 392.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Die Cast Materials_LA-HT
YAMAWA MFG
■ Aluminum thin alloy like（ADC）, Zinc alloy die casting（ZDC）. It is a slightly oversized tap designed to compensatefor the materials tendency to contract after tapping.From: ฿ 374.34 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Tap TiN coated_TIN-HT
OSG
Excellent cutting edge strength is suitable for high hardness materials where the chippings don't stay connected.From: ฿ 602.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS Pro
High quality tap and die sets to DIN standard for general engineering use. Metal CaseAvailable in M3 to M12 and M3 to M20 Size RangesFrom: ฿ 34,307.57 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Tap Set (for Metric Thread Screw)
ISHIHASHI
[Features]
· A tungsten hand tap set.
· Can be used for both through holes and blind holes.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)From: ฿ 487.11 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
·General-purpose uncoated type high-speed steel hand tap
·High versatility, suitable for a variety of applications and work materials such as aluminum and general steelFrom: ฿ 780.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Oversize Straight Flutes Tap_EX-OST
OSG
Since it is oversized compared to the hand tap (HT), it has a long life with work material which tends to shrink, and it can machine a JIS2 grade female screw.From: ฿ 212.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS PRO HSS Tap & Drill Set (917-2602)
RS Pro
Specifications
Set Type = Threading Tap Set
Number of Pieces = 14
Material = HSSFrom: ฿ 5,477.97 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Tap for Cast Iron_EX-FC-HT
OSG
Suitable for all kinds of cast iron, such as gray cast iron, spheroidal graphite cast iron, and malleable cast iron, as well as brass castings.From: ฿ 212.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Thermosetting_PL1
YAMAWA MFG
■ The PL1 is a tap for threading thermosetting resin that is exceptionally difficult to machine among the synthetic resin.These plastics have low thermal conductivity and concentrate the heat at the cutting edge. Tool abrasion is severe. The materialtends to shrink when cutting an internal thread. The PL1 tap is designed to cut slightly oversize to allow for the shrinkage.A nitriding treatment is applied for better tool life.From: ฿ 360.47 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
ISHIHASHI
[Features]
· Tungsten hand tap.
· A common tap that's used in various applications.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)From: ฿ 168.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Hand Tap Set Of 2 Pcs. Volkel (Bspf/G)
VOLKEL
For General
- Non Abrasive Material Up To 900 N/Mm²
- Unalloyed And Low Alloyed Steel
- For Through And Blind Holes
- For Thread Cutting By Hand And Machine
- Sold As Set. 2Pcs Per Set. Each Set Contains
No.1 Rougher , No.3 Finisher
- Tolerance: ISO2/6H
- Standard: JIS B 4430
From: ฿ 715.00 Special Price Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
General purpose hand tap.
[Features]
· Used in various contexts.From: ฿ 320.92 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap (for Metric Screws/SKS)
TRUSCO
A hand tap used when making and exposing (cleaning) screw holes.
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
[Applications]
· Creation and correction of coarse screw threads.
· Work materials: Iron, light metal.From: ฿ 115.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024YAMAWA MFG
■ Long shank hand taps for tapping threads indeep holes that cannot be reached with astandard overall length.From: ฿ 521.84 Special Price Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Long Shank Hand Taps for Left Hand Threads_LS-HT-LH
YAMAWA MFG
■ Long shank hand taps for tapping left-handthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 887.68 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap Set (for Metric Screws / SKS)
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)From: ฿ 1,873.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higherFrom: ฿ 2,779.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Straight Flutes Tap with Internal Coolant Supply_OIL-HT
OSG
Convenient for lateral tapping and processing deep holes. The cutting oil acts on the cutting edge through the oil hole, enabling high-speed and high-precision tappingFrom: ฿ 484.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Carbon Steel Metric Tap & Die Set
RS Pro
High quality tap and die set to DIN standard for thread repair work and general engineering use. Taper, Second & Plug TapsTap wrenchDiestockScrewdriverPlastic CaseFrom: ฿ 18,519.37 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.From: ฿ 2,080.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap【1-3 Pieces Per Package】
ISHIHASHI
Tap Used for General Screw Thread CuttingFrom: ฿ 159.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Hard-to-Machine Materials_EH-HT
YAMAWA MFG
■ The EH-HT tap is suitable for tapping high hardness material from 35 to 45 HRC like high carbon steel, alloy steel forging,thermal refined material and metal mold material.
■ Tool life was greatly improved by utilizing a cutting edge shape suitable for difficult cutting materials . The EH-HT taps exhibit an excellent wear resistance.
■There are two chamfer types available, 2.5P for blind hole and 5P for through hole.From: ฿ 349.82 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS Pro
The RS Pro thread repair kits include everything for repairing your damaged threads. The metric repair kit creates stronger internal threads in most metals, and helps regain the original thread size. • Repairs stripped or damaged internal threads• Different kits available to repairs threads from M2.5 to M10• No engineering experience needed• Protects tapped threads against wear and tearFrom: ฿ 6,893.62 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS Pro
T-handles slide both ways for tighteningHardened & tempered split collet chucks for positive gripKnurled & hardened clamping nutSpring tension holds handle in desired positionIdeal for use in small spaces or where reach is requiredFrom: ฿ 1,101.37 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Tap & Reamer Wrench (Bar Type)
RS Pro
Adjustable all steel tap/reamers with hardened and tempered ’V’ jaws for holding square/round shanksFrom: ฿ 1,308.13 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 387.33 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap for Die Castings_EX-DC-HT
OSG
Ideal for aluminum alloy casting, aluminum alloy die casting, zinc alloy die casting, etc.From: ฿ 267.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap for General Use Long Shank EX-LT
OSG
Long shank type.
Tool Material: Vanadium high-speed steel
Work material: general steel / cast iron / aluminum / copperFrom: ฿ 375.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap Set (for Metric Screws/SKS)
TRUSCO
A hand tap set used to make and clean (clean) screw holes.
[Features]
· Use when manufacturing or cleaning out screw holes.
· For coarse screw thread ridge repair and manufacture.
· A tungsten hand tap set.
[Applications]
· Creation and correction of coarse screw threads.
· Work materials: Iron, light metal.From: ฿ 341.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
SKC
[Applications]
It can be used for machining larger diameter threaded holes than usual in plating and heat treatment processes.
[Features]
High speed steel with excellent heat resistance and thermal damage resistance is used.From: ฿ 580.38 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Collet Ratchet (Short & Long Reach)
RS Pro
Collet type with forward/lock/reverse operation ratchetIdeal for use in difficult to access areasPlated finishFrom: ฿ 2,469.78 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Zero Tap Series V-DC-MT, Metric DIN 374
OSG
Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.From: ฿ 959.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS PRO High Speed Steel Hand tap and drill set Tap Set
RS Pro
Specifications
Set Type = Threading Tap Set
Type = Hand tap and drill set
Number of Pieces = 29
Material = High Speed SteelFrom: ฿ 6,362.82 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Insert Screw Thread Tap_HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.From: ฿ 429.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 462.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Tap for Cast Iron with Long Shank_EX-FC-LT
OSG
Suitable for all kinds of cast iron, such as gray cast iron, spheroidal graphite cast iron, and malleable cast iron, as well as brass castings.From: ฿ 468.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025CPM Straight Flutes Tap_CPM-HT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 394.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Tap Set (for Whitworth Screws / SKS)【1-3 Pieces Per Package】
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.From: ฿ 553.89 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Hand Tap/Die Set (for Metric Screws)
TRUSCO
[Features]
· It is a set of hand-taps from M3 to M16, 38-diameter circular dies, tap handle, tap holder and die handle that can be used to make and clean coarse threaded holes and threads.
· A set item convenient for storage.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.
[Material]
· Low Alloy Steel (SKS)
· Cannot be used on stainless steel materials.From: ฿ 20,564.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Taps for Cast Irons_FC-HT
YAMAWA MFG
■ The FC-HT is suitable for thread processing of hard and brittle materials such as cast iron. It is producedslightly oversized because wear is relatively fast in these materials.From: ฿ 316.86 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Tap Set Of 3 Pcs. Volkel【3 Pieces Per Package】
VOLKEL
For General
-Non Abrasive Material Up To 900 N/Mm²
-Unalloyed And Low Alloyed Steel
-For Through And Blind Holes
-For Thread Cutting By Hand
- Sold As Set. 3Pcs Per Set. Each Set Contains
No.1 Rougher, No.2 Intermediate, No.3 Finisher
- Tolerance: ISO2/6H
- Standard: JIS B 4430
From: ฿ 368.00 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025NACHI(FUJIKOSHI)
From general steel to difficult-to-cut materials, this coated tap allows high efficiency threading.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
[Features]
· For high-hardness material and long-life machining.From: ฿ 999.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT
OSG
Suitable for tapping hardening steel up to 55 HRC.
Work material: High hardness steel to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3From: ฿ 4,059.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 42 to 52 HRC. In order to maximize the properties of the base material, V coating with excellent abrasion resistance has been applied to the surface.From: ฿ 1,031.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap, High Hardness Steel, EX-SH-HT-2.5P, TH1006
OSG
Suitable for heat treated chromium steel, nickel chrome steel, manganese steel, tool steel, etc., with high hardness.From: ฿ 805.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap (for Metric Screws/HSS-E)
TRUSCO
Hand tap made of high speed steel (HSS-E).
[Features]
· Can be used for both through holes and blind holes.
[Applications]
· Work Material: Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / Alloy Steel (SCM) / Steel casting (SC).From: ฿ 219.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,381.61 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 202.44 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 815.00 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 244.54 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ In the tapping of aluminum alloy castings and their equivalent, the AXE-HT produces an excellent improvement in durability andperformance with YAMAWA's unique flute design.
■ The unique shape of the special flute design reduces damage to the cutting edge. With the combination of the premium powderHSS (characterized by high abrasion resistance and heat resistance) and the special coating, tool life has increased 5 timescompared with the conventional tap designed for aluminum.
■ Cutting edge damage diminishes on the flutes. Dimensional change in the internal thread pitch diameter is reduced while surfacefinishes are improved.
■ Suitable from medium to high speed by offering the optimal combination of negative rake angle and eccentric relief.From: ฿ 988.82 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Hand Taps, Coated_LS-HT-V
YAMAWA MFG
■ Long shank coated hand taps for tappingthreads in deep holes that cannot be reachedwith a standard overall length.From: ฿ 1,213.01 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-FC
YAMAWA MFG
■ N-CT LA is the carbide tap suitable for tappingaluminum castings (AC), aluminum die castings(ADC), and zinc diecastings (ZDC). For volumeproduction.From: ฿ 2,698.36 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap (for Whitworth Screw Thread / SKS)
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
· With JIS3 precision, wit screws are exclusively used for surface treatment with no coating.
· Development from 30 types of variations and a wide range of selections are possible.
[Materials] Iron and light metal.
[Applications]
· Can be used for work materials such as iron and light metals.
· Ideal for screw thread correction and production.From: ฿ 174.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Hand Tap Set (for Unified Screw Threads / Fine Type)【3 Pieces Per Package】
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.From: ฿ 806.03 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Tap (for Metric Screws / SKS)
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)From: ฿ 648.92 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI
YAMAWA MFG
■ This is used to cut a comparatively soft material,such as aluminum, and create an internal threadfor accommodating a helical coil wire screwthread insert, in order to reinforce the internalthread and increase durability.
■ Oversize taps of Ib+30 are also available toallow for shrinkage of internal threads.From: ฿ 382.92 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 2,070.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Hand Taps for Steel Conduit Threads_HT-CTC
YAMAWA MFG
■ Tap for steel conduit threads. Thread angle is80 degree and the thread symbol is CTC.From: ฿ 4,136.76 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/20246 Piece Combined Drill and Tap Set
RS Pro
6 piece combined dril and tap setFeaturing sizes M3, M4, M5, M6, M8, M10Supplied in a plastic caseFrom: ฿ 3,946.52 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS Pro
Metric Hexagon drive drill and tap set featuring popular sizes for hand or power tool use.From: ฿ 4,870.55 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Tap DIN Zero Tap Series V-DC-MT, UNF DIN 2184-1
OSG
Ideal for aluminum casting alloy and cast iron while using synchronized feed control machine due to rake angle 0 degree.From: ฿ 1,160.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS PRO HSS #6-32 Spiral Point Threading Tap, 50 mm Length
RS Pro
Specifications
Thread Size = #6-32
Type = Spiral Point
Thread Standard = UNC
Number of Pieces = 1
Material = HSS
Shank Diameter = 3.55 mmFrom: ฿ 273.12 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS PRO HSS 1/4-28 Straight Flute Threading Tap, 56 mm Length
RS Pro
Specifications
Thread Size = 1/4-28
Type = Straight Flute
Thread Standard = UNF
Number of Pieces = 1
Hand/Machine Tap = Hand Tap
Shank Diameter = 6 mmFrom: ฿ 1,019.77 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Carbide tap with a TiCN coating treatment applied to the carbide base metal.
[Features]
· Excellent abrasion resistance and adhesion resistance.
· Improved chip discharge performance and service life.
[Applications]
· Ideal for mass tapping of aluminum and cast iron, etc.From: ฿ 4,810.32 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.From: ฿ 632.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap・Zero Tap for Die Castings_VP-DC-HT
OSG
Excellent power for processing aluminum alloy castings etc. by using machines with perfect synchronous feed mechanism with rake angle 0° and strong cutting edgeFrom: ฿ 909.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hand Tap for General Use Oxidized H-HT
OSG
Steam oxide treatment is applied to prevent welding.
Tool Material: Vanadium high-speed steel
Work material: Steel alloy (SCM) compatibleFrom: ฿ 249.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap for Deep Holes with Slim Shank_EX-SST
OSG
The neck part is thinner than the base diameter, so that it is suitable for processing longer and deeper than the thread part of the tap.From: ฿ 656.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.From: ฿ 2,779.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.From: ฿ 4,697.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT
OSG
Excellent power for processing aluminum alloy castings etc. by using machines with perfect synchronous feed mechanism with rake angle 0° and strong cutting edgeFrom: ฿ 1,222.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,329.54 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,329.54 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap, for Metric Fine Threads (Angle: 60°)
SKC
[Applications]
It can be used for engraving thread grooves of fine threads.
[Features]
For right-hand threads.From: ฿ 248.67 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Light Alloys_N-CT-LA
YAMAWA MFG
■ N-CT LA is the carbide tap suitable for tappingaluminum castings (AC), aluminum die castings(ADC), and zinc diecastings (ZDC). For volumeproduction.From: ฿ 2,819.90 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shank Tapping Drill (TiN Coating)
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper, stainless steel.From: ฿ 1,732.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Hand Tap (for Unified Screw Threads / Coarse Type)
TRUSCO
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying screw threads.
[Applications]
· Work materials: iron, light metals.From: ฿ 263.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 707.82 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
E VALUE
This set provides the most frequently used tap sizes.
[Features]
· In a convenient storage case.
[Applications]
· Threading tap die set for general steel.From: ฿ 4,269.00 Days to Ship:
17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
MITSUTOMO 3‑Pc. Tap, Rough/Medium/Finishing Tap (Alloy Tool Steel)
MITSUTOMO
[Features]
· Can be used for tapping into iron, brass, aluminum, resin, etc. Can also be used to repair damaged threads.From: ฿ 366.00 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024RS Pro
Precision Spiral Flute HSS taps for machine or hand tappingBlue steam tempered finish reduces friction and produces a fine finish on the threadsFrom: ฿ 246.87 Special Price Days to Ship:
8 Day(s)
8 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.            | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | |
| Brand | OSG | YAMAWA MFG | YAMAWA MFG | OSG | TRUSCO | MISUMI | YAMAWA MFG | ENGINEER | YAMAWA MFG | OSG | RS Pro | ISHIHASHI | MISUMI | OSG | RS Pro | OSG | YAMAWA MFG | ISHIHASHI | VOLKEL | NACHI(FUJIKOSHI) | TRUSCO | YAMAWA MFG | YAMAWA MFG | TRUSCO | OSG | OSG | RS Pro | OSG | ISHIHASHI | YAMAWA MFG | RS Pro | RS Pro | RS Pro | HOZAN | OSG | OSG | TRUSCO | SKC | RS Pro | OSG | RS Pro | OSG | OSG | OSG | OSG | TRUSCO | TRUSCO | YAMAWA MFG | VOLKEL | NACHI(FUJIKOSHI) | OSG | OSG | OSG | TRUSCO | SKC | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | TRUSCO | TRUSCO | TRUSCO | YAMAWA MFG | ENGINEER | YAMAWA MFG | RS Pro | RS Pro | OSG | RS Pro | RS Pro | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | SKC | YAMAWA MFG | RUKO | TRUSCO | YAMAWA MFG | E VALUE | MITSUTOMO | RS Pro |
| Product Series | Hand Tap Set (for Metric Screws/HSS-E)【1-3 Pieces Per Package】 | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | Hand Tap Set (for Whitworth Screws / SKS)【1-3 Pieces Per Package】 | Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT | Straight Flutes Tap for Hardened Steels (42-52 HRC)_V-XPM-HT | Hand Tap Set (for Unified Screw Threads / Fine Type)【3 Pieces Per Package】 | Hand Taps for Aluminum Materials (for Helical Coil Wire Screw Thread Inserts)_AL-HT-STI | RS PRO HSS 1/4-28 Straight Flute Threading Tap, 56 mm Length | Straight Flutes Insert Screw Thread Tap with Long Shank_HL-LT | Tungsten Carbide Straight Flutes Tap for Die Castings_OT-DC-HT | Straight Flutes Tap・Zero Tap for Die Castings with Internal Coolant Supply_VO-DC-HT | MITSUTOMO 3‑Pc. Tap, Rough/Medium/Finishing Tap (Alloy Tool Steel) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 84.00 Special Price On Sale Until 31/03/2025 | ฿ 273.49 Special Price On Sale Until 31/03/2025 | ฿ 257.56 Special Price On Sale Until 31/03/2025 | ฿ 267.00 Special Price On Sale Until 31/03/2025 | ฿ 656.00 Special Price On Sale Until 31/03/2025 | ฿ 1,084.00 | ฿ 392.00 Special Price On Sale Until 31/03/2025 | ฿ 569.75 | ฿ 374.34 | ฿ 602.00 Special Price On Sale Until 31/03/2025 | ฿ 34,307.57 Special Price On Sale Until 30/09/2024 | ฿ 487.11 | ฿ 780.00 | ฿ 212.00 Special Price On Sale Until 31/03/2025 | ฿ 5,477.97 Special Price On Sale Until 30/09/2024 | ฿ 212.00 Special Price On Sale Until 31/03/2025 | ฿ 360.47 | ฿ 168.00 | ฿ 715.00 Special Price On Sale Until 30/09/2024 | ฿ 320.92 | ฿ 115.00 Special Price On Sale Until 31/03/2025 | ฿ 521.84 Special Price On Sale Until 30/09/2024 | ฿ 887.68 Special Price On Sale Until 30/09/2024 | ฿ 1,873.00 Special Price On Sale Until 31/03/2025 | ฿ 2,779.00 Special Price On Sale Until 31/03/2025 | ฿ 484.00 Special Price On Sale Until 30/09/2024 | ฿ 18,519.37 Special Price On Sale Until 30/09/2024 | ฿ 2,080.00 Special Price On Sale Until 31/03/2025 | ฿ 159.00 Special Price On Sale Until 31/03/2025 | ฿ 349.82 | ฿ 6,893.62 Special Price On Sale Until 30/09/2024 | ฿ 1,101.37 Special Price On Sale Until 30/09/2024 | ฿ 1,308.13 Special Price On Sale Until 30/09/2024 | ฿ 387.33 | ฿ 267.00 | ฿ 375.00 Special Price On Sale Until 31/03/2025 | ฿ 341.00 Special Price On Sale Until 31/03/2025 | ฿ 580.38 | ฿ 2,469.78 Special Price On Sale Until 30/09/2024 | ฿ 959.00 | ฿ 6,362.82 Special Price On Sale Until 30/09/2024 | ฿ 429.00 Special Price On Sale Until 31/03/2025 | ฿ 462.00 | ฿ 468.00 Special Price On Sale Until 31/03/2025 | ฿ 394.00 Special Price On Sale Until 31/03/2025 | ฿ 553.89 | ฿ 20,564.00 Special Price On Sale Until 30/09/2024 | ฿ 316.86 | ฿ 368.00 | ฿ 999.00 Special Price On Sale Until 31/03/2025 | ฿ 4,059.00 Special Price On Sale Until 31/03/2025 | ฿ 1,031.00 Special Price On Sale Until 31/03/2025 | ฿ 805.00 Special Price On Sale Until 31/03/2025 | ฿ 219.00 Special Price On Sale Until 31/03/2025 | ฿ 1,381.61 | ฿ 202.44 | ฿ 815.00 | ฿ 244.54 | ฿ 988.82 | ฿ 1,213.01 | ฿ 2,698.36 | ฿ 174.00 Special Price On Sale Until 31/03/2025 | ฿ 806.03 | ฿ 648.92 | ฿ 382.92 Special Price On Sale Until 31/03/2025 | ฿ 2,070.00 | ฿ 4,136.76 Special Price On Sale Until 30/09/2024 | ฿ 3,946.52 Special Price On Sale Until 30/09/2024 | ฿ 4,870.55 Special Price On Sale Until 30/09/2024 | ฿ 1,160.00 | ฿ 273.12 Special Price On Sale Until 30/09/2024 | ฿ 1,019.77 Special Price On Sale Until 30/09/2024 | ฿ 4,810.32 | ฿ 632.00 | ฿ 909.00 | ฿ 249.00 | ฿ 656.00 | ฿ 2,779.00 | ฿ 4,697.00 Special Price On Sale Until 30/09/2024 | ฿ 1,222.00 | ฿ 4,329.54 | ฿ 4,329.54 | ฿ 248.67 Special Price On Sale Until 31/03/2025 | ฿ 2,819.90 | ฿ 1,732.00 | ฿ 263.00 Special Price On Sale Until 31/03/2025 | ฿ 707.82 | ฿ 4,269.00 | ฿ 366.00 | ฿ 246.87 Special Price On Sale Until 30/09/2024 |
| Days to Ship | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 1 Day(s) | Same day | 8 Day(s) | Same day | Same day | Same day | Same day | Same day | 20 Day(s) | 1 Day(s) | 4 Day(s) | 11 Day(s) | Same day | 1 Day(s) | 20 Day(s) | Same day | Same day | 5 Day(s) | Same day | Same day | Same day | 1 Day(s) | 8 Day(s) | Same day | Same day | Same day | Same day | Same day | Same day | 31 Day(s) | 8 Day(s) | 91 Day(s) | Same day | Same day | 91 Day(s) | Same day | Same day | 1 Day(s) | Same day | 1 Day(s) | 4 Day(s) | Same day | Same day | Same day | Same day | Same day | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 8 Day(s) | 20 Day(s) | 6 Day(s) | Same day | 1 Day(s) | 1 Day(s) | Same day | 11 Day(s) | 20 Day(s) | 8 Day(s) | 8 Day(s) | 91 Day(s) | 8 Day(s) | 8 Day(s) | 5 Day(s) | 91 Day(s) | 5 Day(s) | 91 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 31 Day(s) | 31 Day(s) | Same day | 6 Day(s) | 1 Day(s) | Same day | 20 Day(s) | 17 Day(s) | 31 Day(s) | 8 Day(s) |
| Screw size (Nominal) | No.0UN ～ M100 | No.0 ～ M36 | 1/2-20UNF ～ M30 | M2 ～ M20 | M3 ～ M16 | M3 ～ M10 | M1 ～ M24 | M1.4 ～ M6.0 | M1.4 ～ M16 | M2 ～ M24 | - | M3 ～ M12 | M3 ～ M10 | M3 ～ M16 | - | M3 ～ M20 | M2 ～ M8 | M3 ～ M20 | - | M3 ～ M24 | M2 ～ M16 | 1 ～ M48 | M3 ～ M30 | M12 ～ M30 | M2 ～ M20 | M6 ～ M30 | - | M1.4 ～ M24 | 1/2UN ～ M20 | M3 ～ M27 | - | - | - | M3 ～ M6 | M1.4 ～ M20 | 1UN ～ M48 | M2 ～ M16 | M6 ～ M12 | - | - | - | No.10UN ～ M30 | M3 ～ M12 | M3 ～ M24 | M3 ～ M48 | W1 ～ W7/8 | - | M3.5 ～ M18 | - | M5 ～ M18 | M3 ～ M12 | M3 ～ M12 | M12 ～ M20 | M3 ～ M16 | G1 ～ G3/8 | W1 ～ W15/16 | W1 ～ W75 | No0UN ～ No12UN | M6 ～ M12 | M3 ～ M12 | No.10-32UNF ～ M24 | W1 ～ W7/8 | UNF1 ～ UNF7/16 | M12 ～ M30 | No.10 ～ M24 | - | 19 ～ 39 | - | - | - | - | - | M3 ～ M12 | No.10UN ～ M12 | M6 ～ M12 | M3 ～ M30 | M3 ～ M6 | M3 ～ M12 | M3 ～ M20 | M6 ～ M12 | 1"1/2UN ～ 3"1/2UN | BSF1"1/2 ～ W"7/8 | M2 ～ M36 | M1.4 ～ M20 | M4 ～ M6 | UNC1 ～ UNC7/16 | 5 ～ 8 | 1/8 BSP ～ M12 | M3 ～ M10 | - |
| Screw Types | Meter / unified / Whitworth / Sewing Machine | Meter / unified / Sewing Machine | Meter / unified / Whitworth | Meter | Meter | Meter | Meter | - | Meter | Meter | - | Meter | Meter | Meter | - | Meter | Meter | Meter | - | Meter | Meter | Meter / unified | Meter | Meter | Meter | Meter | - | Meter | Meter / unified | Meter | - | - | - | Meter | Meter | Meter / unified / Whitworth | Meter | Meter | - | - | - | Meter / unified | Meter | Meter | Meter | Whitworth | Meter | Meter | - | Meter | Meter | Meter | Meter | Meter | Parallel for Pipes | Whitworth | - | unified | Meter | Meter | Meter / unified | Whitworth | unified | Meter | Meter / unified | - | Other | - | - | - | - | - | Meter | Meter / unified | Meter | Meter | Meter | Meter | Meter | Meter | unified | Whitworth | Meter | Meter | Meter | unified | Other | Meter | - | - |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Zinc Alloy Casting (ZDC)[○] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | - | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Cast Iron (FC)[◎] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | - | - | - | - | - | - | - | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | - | - | - |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 0.2 ～ 80 | 0.4 ～ 3 | 0.4 ～ 2.5 | 0.5 ～ 2 | 0.5 ～ 1.5 | 0.25 ～ 3 | 0.3 | 0.3 ～ 2 | 0.4 ～ 3 | - | 0.6 ～ 1.75 | 0.5 ～ 1.5 | 0.5 ～ 2 | - | 0.5 ～ 2.5 | 0.4 ～ 1.25 | 0.5 ～ 2.5 | - | 0.5 ～ 3 | 0.4 ～ 2 | 0.4 ～ 28 | 0.5 ～ 3.5 | 1.25 ～ 3.5 | 0.4 ～ 2.5 | 1 ～ 3.5 | - | 0.3 ～ 3 | 0.4 ～ 28 | 0.5 ～ 3 | - | - | - | 0.5 ～ 1 | 0.3 ～ 2.5 | 0.4 ～ 28 | 0.4 ～ 2 | 1 ～ 1.75 | - | - | - | 0.45 ～ 40 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.5 ～ 5 | 12 ～ 40 | - | 0.6 ～ 2.5 | - | 0.8 ～ 1.5 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 1.5 ～ 2.5 | 0.5 ～ 2 | 11 ～ 28 | 3 1/2 ～ 60 | 8 ～ 40 | 4 ～ 80 | 1 ～ 1.75 | 0.5 ～ 1.75 | 0.3 ～ 3 | - | - | 1.25 ～ 3.5 | 0.5 ～ 48 | - | 16 | - | - | - | - | - | 0.5 ～ 1.75 | 0.5 ～ 40 | 1 ～ 1.75 | 0.5 ～ 3.5 | 0.5 ～ 1 | 0.5 ～ 1.75 | 0.5 ～ 2.5 | 1 ～ 1.75 | 8 ～ 14 | 6 ～ 8 | 0.25 ～ 2 | 0.3 ～ 2.5 | 0.7 ～ 1 | - | 1 ～ 36 | 0.5 ～ 1.75 | 0.6 ～ 1.5 | - |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Carbide | High-speed steel | - | High-speed steel | Vanadium High-Speed Steel | - | - | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | Vanadium High-Speed Steel | High-speed steel | - | - | High-speed steel | Alloy HSS | High-speed steel | High-speed steel | SKS | Carbide | High-speed steel | - | Carbide | - | Cobalt HSS | - | - | - | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | - | - | Vanadium High-Speed Steel | - | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Alloy HSS / SKS | - | High-speed steel | - | Alloy HSS | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | - | - | - | Powder high-speed steel | High-speed steel | Carbide | Alloy HSS / SKS | SKS | SKS | High-speed steel | - | High-speed steel | - | - | Vanadium High-Speed Steel | - | - | Carbide | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | - | - | - | Carbide | High-speed steel | SKS | High-speed steel | - | - | - |
| Tap Type | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | - | Hand Tap | Hand Tap | Hand Tap | - | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | - | Hand Tap | Hand Tap | Hand Tap | - | - | - | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | - | - | - | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | - | - | - | - | - | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | - | - |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | - | For through hole / For blind hole | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | - | For through hole / For blind hole | - | - | - | - | For through hole / For blind hole | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | - | For through hole / For blind hole | For through hole / For blind hole | For through hole | - | - | - | - |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 1.5P ～ 5P | 1.5P ～ 4P | 1.5P ～ 5P | - | 1.5P ～ 3P | 1.5P ～ 5P | - | 1.5P ～ 5P | 1.5P ～ 5P | - | - | 1.5P ～ 9P | 1.5P ～ 5P | - | 1.5P ～ 3P | 3P | - | - | 1.5P ～ 5P | 1.5P ～ 9P | 1.5P ～ 5P | 1.5P ～ 5P | - | 3P | 1.5P | - | 1.5P ～ 3P | 1.5P ～ 9P | 2.5P ～ 5P | - | - | - | - | 1.5P ～ 3P | 1.5P ～ 5P | - | 5P ～ 9P | - | - | - | 1.5P ～ 9P | 1.5P ～ 5P | 1.5P ～ 3P | 2P ～ 5P | - | - | 1.5P ～ 5P | - | 1.5P ～ 3P | 2.5P ～ 5P | 2.5P ～ 5P | 2.5P | 1.5P ～ 9P | 5P | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P | 1.5P ～ 5P | 1.5P ～ 3P | - | 12P ～ 28P | - | 1.5P ～ 5P | - | 5P | - | - | - | - | - | 1.5P ～ 3P | 1.5P ～ 5P | 1.5P | 1.5P ～ 5P | 1.5P ～ 5P | 1.5P | 1.5P ～ 3P | 1.5P | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P ～ 9P | 1.5P ～ 5P | - | 8P ～ 20P | 1.5P | - | - | - |
| Coating Type | Non-Coated | - | - | Non-Coated | Non-Coated | - | - | - | Nitriding Treatment | TiN | - | Non-Coated | - | Non-Coated | - | Non-Coated | - | Non-Coated | - | - | Non-Coated | - | - | Non-Coated | TiCN / Other | Non-Coated | - | Non-Coated | Non-Coated | - | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | Nitriding Treatment | - | TiN | TiCN | TiCN | Non-Coated | Non-Coated | - | - | - | - | TiN | TiN | - | - | - | Non-Coated | Non-Coated | - | - | - | - | - | - | - | TiCN | Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | - | - | - | - | TiN | - | Non-Coated | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | - | Available | Available | - | - | NA | NA | - | Available | NA | - | - | NA | NA | NA | NA | NA | Available | NA | - | NA | NA | NA | - | - | - | NA | Available | NA | NA | - | - | - | - | NA | NA | Available | NA | NA | NA | Available | - | Available | Available | Available | NA | NA | - | - | - | - | Available | Available | NA | NA | NA | NA | NA | - | - | - | - | - | - | - | Available | NA | Available | NA | NA | NA | NA | Available | - | - | - | NA | Available | NA | NA | - | - | - |
| Overall Length (L)(mm) | 30 ～ 275 | 36 ～ 155 | 42 ～ 135 | 40 ～ 105 | 46 ～ 95 | 46 ～ 75 | 36 ～ 120 | - | 36 ～ 95 | 40 ～ 120 | - | - | 46 ～ 75 | 46 ～ 95 | - | 46 ～ 105 | 42 ～ 70 | 46 ～ 105 | - | 46 ～ 120 | 40 ～ 95 | 70 ～ 300 | 100 ～ 200 | 80 ～ 135 | 40 ～ 105 | 80 ～ 250 | - | 34 ～ 120 | 40 ～ 105 | 46 ～ 130 | - | - | - | - | 34 ～ 105 | 80 ～ 300 | 40 ～ 95 | 62 ～ 82 | - | 100 ～ 140 | - | 46 ～ 155 | 100 ～ 200 | 100 ～ 200 | 46 ～ 185 | 95 ～ 125 | - | 52 ～ 100 | - | 60 ～ 100 | 46 ～ 82 | 46 ～ 82 | 82 ～ 105 | 46 ～ 95 | 55 ～ 95 | 36 ～ 250 | - | - | 62 ～ 82 | 100 ～ 150 | 34 ～ 120 | 46 ～ 125 | 62 ～ 125 | 80 ～ 135 | 52 ～ 130 | - | 105 ～ 165 | - | - | 56 ～ 125 | - | - | 46 ～ 82 | 100 ～ 150 | 62 ～ 82 | 46 ～ 135 | 120 ～ 150 | 46 ～ 82 | 100 ～ 150 | 62 ～ 82 | - | - | - | 34 ～ 105 | 54 ～ 60 | 62 ～ 125 | 62 ～ 70 | - | - | - |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?