(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Chamfer, V-Grooves
[What is a chamfering tool?]
A tool for chamfering of drill holes, etc., which is used for removing burrs on the hole's surface. There are end mills for chamfering, chamfering cutters, inner radius cutters, etc., depending on the application.
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 42
- 45
- 46
- 50
- 55
- 56
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 157 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coating enables higher speed and longer service life compared to NC-LDSFrom: ฿ 491.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank
OKAZAKI SEIKO
Work Material Aluminum/Copper
Tool Grade, Cobalt High-Speed Steel
Tip angle (θ) 90
With or without coating: with coating
Coating type, TiNFrom: ฿ 1,245.24 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,519.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Precision Chamfering Tool TOGURON® Sharp Chamfer
IWATA TOOL
[Features]
·Special chamfering model for the Togron Sharp series.
·Minimal burrs and chatter, clean surface roughness.
[Applications]
·Work Material: Aluminum alloy, copper, plastic.From: ฿ 1,159.42 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
[Features]
・ This drill increases processing speed for both centering and countersinking. Constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life.
・AD-LDS 60°、90°、120°、130°、140°（φ0.5～φ12）From: ฿ 1,312.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.From: ฿ 1,811.61 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).From: ฿ 271.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024FUKUDA
A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.From: ฿ 1,870.66 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight flutes.
90° (included angle type)
Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin
Single-edge blade
Tool grade, CarbideFrom: ฿ 3,536.91 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 1 mm.
[Applications]
· For cutting decorative tapes.From: ฿ 1,300.31 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Three & Five-Flute HSS Countersinks
RS Pro
90° flutes for use with machines and portable toolsThree-flute designed to reduce clogging, improve clearance and be chatter freeThree-flute for use on metals onlyFive-flute for use on metal and woodFrom: ฿ 1,099.80 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.From: ฿ 1,723.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining styleFrom: ฿ 1,360.26 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, chamfering width 0.6 mm.
[Applications]
· For cutting decorative tapes.From: ฿ 1,452.09 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUKUDA
End mill for R chamfering.
[Features]
·The use of a straight blade makes it easy to re-grind and has excellent cost performance.
·The shank diameter is designed to be thick, making it rigid.
·A rich lineup from R0.5 to 30.
[Applications]
·Ideal for R chamfering.From: ฿ 2,405.91 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outside Chamfering Cutter (Nice Guy) NGC (SKH51)
TAIYO-TOOL
[Applications]
· Hole chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-CoatedFrom: ฿ 6,715.80 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Back Seat Mini Chamfer (90° Blade)
NOGA JAPAN
[Features]
·A solid carbide chamfering cutter that can chamfer the back of small holes (minimum cutting edge diameter 1.5 mm).
·Perfect for machining.
·Can be used for milling, deburring, and back chamfering.
·The spiral blade provides a smooth cutting edge.
·This is a mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.
[Applications]
·Work Material: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
·A mini chamfer that can be chamfered and deburred by milling both the front and back of drilled holes.From: ฿ 2,563.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, square (90 degrees).
[Applications]
· For cutting decorative tapes.From: ฿ 1,459.55 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024From: ฿ 1,148.76 Special Price Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
·Easy high-quality processing of corner radius
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating propertiesFrom: ฿ 1,254.19 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 3,031.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.From: ฿ 2,660.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
2-flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 3,851.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
3-flute Chamfering Cutter (positive type) HSCT-P
OSG
End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,587.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
UNION TOOL
[Features]
· Carbide spiral chamfer cutter.
· Taper radius: 45°.
· Since the twist type is used for outer peripheral blade, burrs are suppressed compared to the straight blade type.From: ฿ 2,798.04 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.From: ฿ 4,935.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 0.3 mm.
[Applications]
· For cutting decorative tapes.From: ฿ 1,307.77 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Can be used for polishing.
· Cut end shape, chamfering width 1 mm.
[Applications]
· For cutting decorative tapes.From: ฿ 1,452.09 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard typeFrom: ฿ 3,261.47 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.From: ฿ 3,261.47 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS Pro
90° flutes suitable for use on ferrous and non ferrous materialFrom: ฿ 5,968.87 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burrFrom: ฿ 1,854.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 656.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MITSUBISHI HITACHI TOOL
The base material is cobalt high-speed steel.
Work Material, General Steel/Stainless Steel/Aluminum/Titanium
Single-edge blade
With or without peripheral edge: with edge
Tool grade, High-speed steel
Tip angle (θ) 90From: ฿ 697.77 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Chatterless chamfer milling machine
FUKUDA
6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
[Features]
· Chamfering.
· Drilling machines, milling machines, machining centers.
· Horizontal MillingFrom: ฿ 837.10 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 3,765.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.From: ฿ 2,975.70 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSSFrom: ฿ 1,269.84 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Back Seat Mini Chamfer (120° Blade)
NOGA JAPAN
[Features]
· A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 2 mm).
· Ideal for machining.
· Spiral blade provides smooth sharpness.
· A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
[Applications]
· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
· A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.From: ฿ 2,563.41 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
STAR-M
[Features]
· Ideal for cutting off protrusions of decorative tapes and wood tapes attached to furniture or fittings.
· Uses ceramic blade.
· Cut end shape, chamfering width 0.6 mm.
[Applications]
· For cutting decorative tapes.From: ฿ 1,307.77 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
6.3 to 20.5 mm Counter Sink (3-Flute, 6 Pcs. Set, HSS)
ESCO
[Features]
·"Set contents": 6 pcs. set
·Size (Cutting diameter × shank diameter): 6.3 × 5, 8.3 × 6, 10.4 × 6, 12.4 × 8, 16.5 × 10, 20.5 × 10 mm, 1 for each size
·Materials: HSS (high-speed steel)
·Tip angle: 90°
·Number of Grooves: 3
·Counter sink (countersunk) suitable for deburring metal.From: ฿ 7,804.48 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of WorkpiecesFrom: ฿ 2,168.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
MISUMI
The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.From: ฿ 1,841.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,448.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.From: ฿ 1,547.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Leading Drill, Carbide FX Coating FX-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.From: ฿ 2,179.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
EIKOSHA
Chamfering New chamfering milling cutter with 1 flute.
[Features]
·Can be re-polished.
·A shape that does not chatter when chamfering.From: ฿ 3,156.80 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUKUDA
A cutting tool used for finishing the center hole and chamfering.
[Features]
·Because it is designed with an odd number of flutes, machining with little chatter is possible.
·A rich lineup of 60°, 90° and 120°.
[Applications]
·Ideal for finishing center holes, as well as chamfering corners.From: ฿ 662.95 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Versatile center chamfer cutter.
[Features]
· Since the outer diameter and the shank diameter are the same, workpiece interference is prevented.
· Can be used for a wide range of applications.From: ฿ 1,481.81 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 1,907.70 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide Long Type
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.From: ฿ 2,372.05 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Toglon Hard SP 90° ALD Coating
IWATA TOOL
[Features]
· Possible to machine HRC 40 to 72 hardened steel.
· Demonstrates incomparable performance against hardened steel, die steel, Kovar, and Hastelloy, etc.
· Maximum surface roughness can be achieved due to high helix shape.
· Amazing long lifespan due to 3-flute and long cutting edges.From: ฿ 2,836.40 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.From: ฿ 1,774.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 2,294.80 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Milling Cutter for 120° Chamfering Type N 6714
GUHRING
Taper half-angle 60° chamfering milling cutter.From: ฿ 1,483.12 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy PositioningFrom: ฿ 576.18 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,461.73 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Umbrella-type cutter with handle PCS
EIKOSHA
[Features]
· Front (with end blade) cutting and chamfering are possible.From: ฿ 2,649.39 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.From: ฿ 1,306.72 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Back Seat Mini Chamfer (Dovetail 45° Blade)
NOGA JAPAN
[Features]
· Mini chamfer consisting only of back chamfer blade.
· Ideal for chamfering undersides of shallow bases.
[Applications]
· Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
· A mini chamfer that can chamfer and deburr by back milling drill holes.From: ฿ 2,563.41 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High Speed Chamfering Tool TOGLON® Multi Chamfer
IWATA TOOL
[Features]
· Toglon-shaped 5-flute chamfering dedicated model
· Ultra-high speed machining with suppressed burrs is possible for light chamfering
[Applications]
· Work materials: Mild steel, carbon steel, alloy steel, tempered steel, stainless steel, titanium alloyFrom: ฿ 1,807.96 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Chamfer/Deburring Tool Set CS7000
NOGA JAPAN
[Features]
· Comes with a countersink adapter that can be easily mounted on power tools such as electric drills.
[Applications]
· Hole chamfering and outer diameter chamferingFrom: ฿ 478.33 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cutter Neo Sharp (Spare Blade)
STAR-M
[Features]
· Replacement blade for veneer tape cutter.
· Round blade can be used over 360 degrees.From: ฿ 752.05 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.From: ฿ 3,540.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.From: ฿ 3,925.71 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.From: ฿ 2,972.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating propertiesFrom: ฿ 2,338.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizesFrom: ฿ 1,661.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shotFrom: ฿ 1,812.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° incrementsDays to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.From: ฿ 1,934.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.From: ฿ 2,821.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.From: ฿ 3,143.89 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.From: ฿ 1,263.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.From: ฿ 13,689.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 3,365.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.From: ฿ 4,168.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.From: ฿ 4,127.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute Chamfering Cutter (negative type) HSCT-N
OSG
End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,587.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N
OSG
Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,848.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P
OSG
Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,848.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 1,567.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank
OSG
Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.From: ฿ 943.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Solid Chamfering Endmill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.From: ฿ 1,804.96 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUKUDA
A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.From: ฿ 7,902.65 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Mini WR Chamfer Cutter
EIKOSHA
Carbide mini WR chamfering cutter capable of R chamfering on the top and bottom surfaces.
[Features]
·Abrasion resistance is achieved by adopting TIAlN coating.
·Back and surface R chamfering.
[Applications]
·R chamfering on the front and R chamfering on the back can be processed with this single tool.From: ฿ 6,793.55 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 9,936.68 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SAGCCC AS Coated Carbide Center for Chamfering
SANKO MFG
[Features]
· Center chamfering cutter with TiAlN coating.
· Can be used in a wide range of applications by combining the design concepts of end mills and drills.
· Double angle is adopted to chamfering portion.
· Possible to make a clean finishing surface with less burrs.From: ฿ 3,527.74 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GCCC, Carbide Center for Chamfering
SANKO MFG
[Features]
· Can be used in a wide range of applications by combining the design concepts of end mills and drills.
· Double angle is adopted to chamfering portion.
· Possible to make a clean finishing surface with less burrs.From: ฿ 2,856.52 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 2,372.05 Days to Ship:
5 Day(s)
5 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | OKAZAKI SEIKO | MISUMI | IWATA TOOL | OSG | MISUMI | OSG | FUKUDA | KYOWA SEIKO | STAR-M | RS Pro | MISUMI | MISUMI | STAR-M | FUKUDA | TAIYO-TOOL | NOGA JAPAN | STAR-M | RS Pro | MISUMI | MISUMI | OSG | OSG | OSG | UNION TOOL | OKAZAKI SEIKO | STAR-M | STAR-M | MAKOTOLOY | MAKOTOLOY | RS Pro | MISUMI | OSG | MITSUBISHI HITACHI TOOL | FUKUDA | IWATA TOOL | IWATA TOOL | NT TOOL | NOGA JAPAN | STAR-M | ESCO | MISUMI | MISUMI | MISUMI | MISUMI | OSG | EIKOSHA | FUKUDA | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | OKAZAKI SEIKO | DIJET | GUHRING | NT TOOL | EIKOSHA | EIKOSHA | 7 LEADERS | NOGA JAPAN | IWATA TOOL | NOGA JAPAN | STAR-M | OSG | MAKOTOLOY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | DIXI | FUKUDA | EIKOSHA | EIKOSHA | SANKO MFG | SANKO MFG | IWATA TOOL |
| Product Series | CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank | TS coated carbide chamfering end mill, 2-flute / short model | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | TS coated carbide chamfering end mill, 3-flute / short model | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | 2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC | 2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC | 3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N | 3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 491.00 | ฿ 1,245.24 | ฿ 1,519.00 | ฿ 1,159.42 | ฿ 1,312.00 | ฿ 1,811.61 | ฿ 271.00 | ฿ 1,870.66 Special Price On Sale Until 30/06/2024 | ฿ 3,536.91 | ฿ 1,300.31 | ฿ 1,099.80 Special Price On Sale Until 30/06/2024 | ฿ 1,723.00 | ฿ 1,360.26 | ฿ 1,452.09 | ฿ 2,405.91 | ฿ 6,715.80 | ฿ 2,563.00 | ฿ 1,459.55 | ฿ 1,148.76 Special Price On Sale Until 30/06/2024 | ฿ 1,254.19 | ฿ 3,031.00 | ฿ 2,660.00 | ฿ 3,851.00 | ฿ 3,587.00 | ฿ 2,798.04 | ฿ 4,935.00 Special Price On Sale Until 30/06/2024 | ฿ 1,307.77 | ฿ 1,452.09 | ฿ 3,261.47 | ฿ 3,261.47 | ฿ 5,968.87 Special Price On Sale Until 30/06/2024 | ฿ 1,854.00 | ฿ 656.00 | ฿ 697.77 | ฿ 837.10 | ฿ 3,765.09 | ฿ 2,975.70 | ฿ 1,269.84 | ฿ 2,563.41 | ฿ 1,307.77 | ฿ 7,804.48 | ฿ 2,168.00 | ฿ 1,841.00 | ฿ 1,448.00 | ฿ 1,547.00 | ฿ 2,179.00 Special Price On Sale Until 30/06/2024 | ฿ 3,156.80 | ฿ 662.95 | ฿ 1,481.81 | ฿ 1,907.70 | ฿ 2,372.05 | ฿ 2,836.40 | ฿ 1,774.00 | ฿ 2,294.80 | ฿ 1,483.12 | ฿ 576.18 | ฿ 3,461.73 | ฿ 2,649.39 | ฿ 1,306.72 | ฿ 2,563.41 | ฿ 1,807.96 | ฿ 478.33 | ฿ 752.05 | ฿ 3,540.00 | ฿ 3,925.71 | ฿ 2,972.00 | ฿ 2,338.00 | ฿ 1,661.00 | ฿ 1,812.00 | ฿ 1,934.00 | ฿ 2,821.00 | ฿ 3,143.89 | ฿ 1,263.00 | ฿ 13,689.00 Special Price On Sale Until 30/06/2024 | ฿ 3,365.00 | ฿ 4,168.00 | ฿ 4,127.00 | ฿ 3,587.00 | ฿ 3,848.00 | ฿ 3,848.00 | ฿ 1,567.00 | ฿ 943.00 | ฿ 1,804.96 | ฿ 7,902.65 | ฿ 6,793.55 | ฿ 9,936.68 | ฿ 3,527.74 | ฿ 2,856.52 | ฿ 2,372.05 | |
| Days to Ship | Same day | Same day | 3 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | 5 Day(s) | 5 Day(s) | 12 Day(s) | Same day | Same day | Same day | 31 Day(s) | 1 Day(s) | 5 Day(s) | Same day | 31 Day(s) | 8 Day(s) | Same day | 3 Day(s) | Same day | Same day | 5 Day(s) | 7 Day(s) | Same day | 31 Day(s) | 31 Day(s) | 6 Day(s) | 5 Day(s) | Same day | Same day | Same day | 1 Day(s) | Same day | 5 Day(s) | Same day | Same day | 6 Day(s) | 31 Day(s) | 6 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | Same day | Same day | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | Same day | 5 Day(s) | 15 Day(s) | 31 Day(s) | 5 Day(s) | 6 Day(s) | 3 Day(s) | Same day | Same day | Same day | 5 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) |
| Specifications | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tool Material Type | High-speed steel | Cobalt HSS | Carbide | - | Carbide | Carbide | High-speed steel | Cobalt HSS | Carbide | - | - | Carbide | Powder high-speed steel | - | High-speed steel | High-speed steel | - | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | - | - | Carbide | Carbide | - | Carbide | Powder high-speed steel | High-speed steel | Cobalt HSS | Carbide | Carbide | Cobalt HSS | - | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | High-speed steel | Cobalt HSS | High-speed steel / Cobalt HSS | Carbide | - | - | - | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Powder high-speed steel | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 3 ～ 25 | 20 ～ 55 | 3 ～ 12 | - | 0.5 ～ 12 | 3 ～ 16 | 2 ～ 25 | 4 ～ 40 | - | - | - | 3 ～ 12 | 10 ～ 25 | - | - | 25 ～ 55 | 1.5 ～ 6 | - | - | - | 3 ～ 12 | 0.5 ～ 1.5 | 0.8 ～ 1 | 1 ～ 2 | 0.8 ～ 1 | 36 ～ 66 | - | - | 1 ～ 20 | 1 ～ 20 | - | 3 ～ 12 | 3 ～ 25 | 4 ～ 60 | - | 3 ～ 12 | 0.1 ～ 1.5 | - | 2 ～ 5 | - | - | 3 ～ 12 | 3 ～ 12 | 3 ～ 16 | 3 ～ 12 | 0.5 ～ 25 | 6 | - | 6 ～ 32 | 1.2 ～ 16 | 3 ～ 12 | 0.6 ～ 4 | 6 ～ 40 | 3 ～ 20 | 4 ～ 12 | 10 ～ 25 | - | 15 ～ 100 | 0.5 ～ 20 | 1.5 ～ 6 | - | - | - | - | 3 ～ 25 | 3 ～ 12 | 3 ～ 12 | - | 3 ～ 12 | 10 ～ 25 | - | 3 ～ 10 | 3 ～ 12 | - | 16 ～ 25 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | - | 3 ～ 25 | 2 ～ 12 | - | 3.8 ～ 13.4 | 6.8 ～ 15.4 | 3 ～ 20 | 3 ～ 20 | 1.2 ～ 16 |
| Tip angle (θ) | 60 ～ 120 | 90 | 60 ～ 120 | 90 | 90° ～ 140° | 60 ～ 120 | 90 ～ 130 | 90 ～ 120 | - | - | - | 60 ～ 120 | 60 ～ 120 | - | - | - | 90 | - | - | - | - | - | 90 | 90 | 90 | 90 | - | - | 60 | 90 | - | 90 | 90 | 90 | 60 ～ 120 | 90 | 90 | 90 | 120 | - | - | 90 | 90 | 60 ～ 120 | 90 | 90 | 60 | 60 ～ 120 | - | 90 | 90 | 90 | 90 | 60 ～ 120 | 120 | 90 | - | 60 ～ 90 | 90 | 45 | 90 | - | - | 90° | 120 | 90 | 90 | - | 90 | 60 ～ 160 | - | 90 | 90 | - | 90 | 90 | 90 | 90 | 90 | 90 | 90 | - | 90 | 90 | 60 ～ 90 | - | - | - | - | 60 |
| Application | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other | Chamfering/Horizontal | - | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | - | Round Chamfer | Hole Chamfer | - | - | - | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Hole Chamfer | - | - | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | - | - | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Chamfering/Horizontal | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Chamfering/Horizontal / V Groove / Drilling / Other | - | Hole Chamfer | Round Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | - | Other | - | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | general steel[○] / Cast Iron[○] / Resin[○] | - | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | - | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | - | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / high hardness steel[○] / Cast Iron[○] | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | Aluminum[○] / Copper[○] | general steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - | - | - | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | Single blade | Single blade | - | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade / Double-edged | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade / Double-edged | - | - | - | - | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | - | - | - | - | Single blade |
| Peripheral Blade Y/N | NA | NA | Available | - | NA | NA | NA | Available | - | - | - | Available | Available | - | NA | - | - | - | - | NA | Available | NA | NA | NA | NA | NA | - | - | - | - | - | NA | NA | Available | NA | NA | NA | NA | - | - | - | Available | NA | NA | NA | NA | - | NA | Available | NA | NA | NA | NA | - | - | NA | - | - | - | - | - | - | - | NA | - | NA | Available | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | NA | - | - | Available | Available | NA |
| Coating Y/N | Available | Available | Available | - | Available | Available | NA | NA | NA | - | - | Available | Available | - | NA | NA | - | - | - | Available | Available | Available | Available | NA | NA | Available | - | - | NA | NA | - | NA | Available | NA | NA | Available | Available | NA | - | - | - | Available | Available | Available | Available | Available | - | NA | NA | NA | NA | Available | Available | NA | Available | NA | NA | NA | Available | - | - | - | - | Available | Available | Available | Available | NA | NA | Available / NA | Available | Available | Available | Available | Available | NA | Available | NA | NA | NA | NA | Available | Available | Available | NA | - | - | Available | NA | NA |
| Coating Type | TiN | TiN | AlCrN | DLC / Non-Coated / ALT | Other | TS | Non-Coated | Non-Coated | - | - | - | TS | - | - | Non-Coated | Non-Coated | TiAlN | - | - | TS | AlCrN | TiAlN | TiAlN | Non-Coated | - | TiN | - | - | - | - | - | - | TiCN | Non-Coated | Non-Coated | DLC | ALT | - | TiAlN | - | - | TS | TS | AlCrN | TS | TiAlN | - | Non-Coated | Non-Coated | - | - | Other | TiN | Non-Coated | TiAlN | - | - | - | Other | TiAlN | Non-Coated / ALT | - | - | - | TiN | TS | TS | - | - | TiCN | AlCrN | AlCrN | AlCrN | AlCrN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | TiAlN | Non-Coated | - | - | TiAlN | Non-Coated | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 30 | - | - | - | - | 0.1 ～ 5 | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10.5 ～ 20.5 | - | - | - | - | - | - | - | - | - | - | 0.15 ～ 5 | - | - | 0.5 ～ 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Chamfer, V-Grooves
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?