Carbide Starting Drill AD-LDS
Brand :
OSG
Caution
- Limited Time Offer: BUY 3 GET 4
- Get 1 Free Sample when purchase minimum of 3 pcs for NEW AE-series and AD- series customers.
- **Free 1 pc will be delivered separately at a different delivery time set upon makers’ stock availability.
Product Description
[Features]
・ This drill increases processing speed for both centering and countersinking. Constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life.
・AD-LDS 60°、90°、120°、130°、140°（φ0.5～φ12）
Product features and specifications
Basic specifications and features of the product
EgiAs coating with high abrasion resistance and toughness
Achieves long lifespan and stable lifespan with a coating with excellent toughness in addition to high abrasion resistance and heat resistance
Drawing
Recommended cutting conditions
Recommended cutting condition table
- For this cutting condition, the number of rotational speeds, feed rate and depth of cut are listed for each work material (general steel, steel alloy, heat-treated steel, high hardness steel, stainless steel, aluminum, cast iron, etc.) based on the manufacturer's recommended conditions.
- The optimum cutting conditions vary depending on the machining environment (machine tool, tool holder, etc.), so use this product while checking the machining conditions (machining surface, chattering, etc.) and conducting calibration.
Centering
Chamfer
Precautions for cutting conditions
- When using AD-LS-LDS (long shank), please use it in a low feed rate.
- If the number of rotational speed does not rise sufficiently, set the speed as high as possible.
- This cutting condition standard table is for when using a water-soluble cutting oil.
- When using a water-insoluble cutting oil, reduce the cutting speed by 20%.
- For centering on curved surfaces, inclined surfaces, etc., use it in a low feed rate.
- Centering on stainless steel is not recommended. Please use TIN-NC-LDS or NC-LDS.
- For high-speed machining, the upper limit should be twice the median cutting speed above.
- For chamfering holes in stainless steel, refer to the values for low carbon steel.
Selection support information
Production correspondence table by drill bit diameter
The manufacturer provides the optimum machining scene with a wider lineup that is even more complete according to the application
Units: mm
