Small AC Induction Motors 6-200W

Brand :
MISUMI

Caution

    Product Description

    Small AC Induction Motors 6-200W launched as MISUMI Economy series
    If the shaft end shape is selected A (circular shaft), the gear head cannot be added. To use the gear head, select GN, GU for the shaft end shape.

    【Outerline Drawings】
    Detailed outline drawings.
    Detailed wiring diagrams.
    Detailed technical data.

    【Usage】
    - A general-purpose motor that runs at constant speed for 24 hours, prioritizes cost-effectiveness, and is easy to maintain.
    【Product Features】
    - Robust structure and high efficiency enable energy saving and stable operation for constant-speed applications such as conveyors, fans, and pumps.
    - Easy selection of 2-pole/4-pole, various voltages, and low-speed torque.

    Product Overview
    Motor TypeTypeApplicationsFeaturesNotesOutput RangeMotorController
    ParallelRight Angle
    Induction MotorEA-IMA
    EA-IMB
    【Constant-speed continuous operation】 (24-hour use such as fans, pumps, mixers, conveyors with minimal load fluctuation)Simple and robust structure. Three-phase types provide high efficiency and good starting characteristics single-phase types offer easy wiring.Not suitable for large acceleration/deceleration or frequent forward/reverse cycles.6~200WLINKLINK-
    Reversible MotorEA-RM【Frequent forward/reverse operation】 positioning, reciprocating motion, pushing applicationsExcellent reversing response, minimizing overrunGenerates a lot of heat, so it has a short-time rating (ex. 30 minutes)6~120WLINKLINK-
    Brake MotorEA-BM【Holding / maintaining stop】 lifting, vertical transport, safety stopStops and holds immediately when power is turned off, and maintains position even during power failureLimitations apply regarding stop frequency and temperature environment6~200WLINKLINK-
    Speed Control MotorEA-AM【Speed control】 flow control, tension control, synchronous feeding, frequent setup changesController-integrated design for easy wiring with a wide adjustable speed rangeRisk of overheating during ultra-low-speed continuous operation6~200WLINKLINKLINK
    Reversible Speed Control MotorEA-ARM【Speed control + reverse】 positioning, reciprocating motion, pushing applications requiring adjustable speedCombines speed control and reversing capability in a single unit.Duty cycle and thermal limits must be considered in continuous use.25~120WLINKLINKLINK
    Brake Speed Control MotorEA-ABM【Speed control +Brake】 vertical transport, lifting requiring speed adjustment and position holdingAllows speed adjustment while maintaining safe and stable stopping performance.Not suitable for continuous operation under heavy braking conditions.25~200WLINKLINKLINK
    Torque MotorEA-TM【Tension Control】 Winding, feeding, and pressing applications that require maintaining constant tension or pressure.Maintains high torque even at low or near-stopped speedsGenerates significant heat → ensure operation within continuous torque rating and provide cooling3~20WLINK--
    *: Scheduled to be released after web production in March 26th
    Outline Drawing
     Link Pages which have outerline dimension, wiring,technical data are available. Please refer to the page top " Product Description ".

      
    ◇Motor & Gearhead Set
    ◇ Terminal Box / Fan-Attached Type
    ◇ Fan-Attached Type
    Specification Table
    ~  Please select the model and parameters according to the options below before placing your order.
    order ex
    Part Number
     - 
    Shaft End Shape
     - 
    Input V Code
     - 
    Additional Option
    Fan / Terminal Box Type
     - 
    Additional Option
    Gearhead Selection
     • 
    Additional Option
    Gear Ratio
    Type・Flange Size
    EA-IMB4020-GN-C-T-GH30
    EA-IMB5120-A-B-F-T   

     

    ■ Motor Body
    ❶❷  ❸❹
    TypeNoFlange
    Size
    Output
    Power
    [W]
    Shaft End
    Shape
    Input V
    Code
    FanTerminal Box
    〈4poles〉
    EA-IMA
    2006□606GN:GN Gear
    A:Round
    〈4poles〉
         A  :Single 110V、50/60Hz、4poles
         E  :Single 110/120V、60Hz、4poles
         C  :Single 220/230V、50Hz、4poles
         H  :Single 220/230V、60Hz、4poles
         S  :Three 200/220/230V、50/60Hz、4poles
         S3:Three 380/400/415V、50/60Hz、4poles
    noneNot applicable
    3015□7015none
    4025□8025noneT:Terminal box
    ※If not selected, lead wire type.
    5040□9040none
    506060GN、GU、AF:With fan
    509090GU:GU Gear
     A:Round
    F:With fan
    5120120F:With fan
    6120□104F:With fan
    6140140F:With fan
    6200200F:With fan
    〈2poles〉
    EA-IMB
    2006□606A:Round〈2poles High Speed〉
         B :Single 110V、50Hz、2poles
         D :Single 220V、50Hz、2poles
         T  :Three 200/220/230V、50/60Hz、2poles
         T3:Three 380/400/415V、50/60Hz、2poles     
    noneNot applicable
    3015□7015none
    4025□8025none
    404040F:With fan
    5040□90none
    506060F:With fan
    509090F:With fanT:Terminal box
      ※Only for over 90W and 3-phase Voltage.
    5120120F:With fan
    5150150F:With fan
     The various safety standards are certified based on the model name indicated on the motor’s nameplate.
     For the “-A” model with a voltage of 110V, please refer to the capacitor capacity shown on the actual unit’s nameplate.


    ■ Gearhead (Additional machining can be specified)
    ※ Additional machining can be designated only when selecting shaft types GN or GU.
                           
    Alterations
    Code
    NoFlange
     Size
    Gear Ratio                     
    33.6567.591012.51518202530364050607590100120150180200
    GH2□6033.6567.591012.51518202530364050607590100120150180200
    3□7033.6567.591012.51518202530364050607590100120150180200
    4□8033.6567.591012.51518202530364050607590100120150180200
    5□9033.6567.591012.51518202530364050607590100120150180200
    6□10433.6567.591012.51518202530364050607590100120150180200
     ※Gearhead standalone model number = EA- & {Additional Processing Code} & {Flange No.} & {Gear Ratio}
     
    Specification Overview

    ■ 4-Pole Voltage (EA-IMA)
    ❶ ❷  ❸❹       
    Type No

    Flange
    Size

    Output
    [W]
    Shaft End
    Shape

    Input V
    Code

    VoltageFrequencyStarting
    Current
    Starting
    Torque
    Rated
    Torque
    SpeedCapacitor
    [V][Hz][A][mN・m][mN・m][r/min][μF]
    2006□606GN 
    A
    -A1ph 100500.24055481,2003.5
    600.25050401,4503.5
    -E1ph 110600.16040401,4502.0
    1ph 120600.18040401,4502.0
    -C1ph 220500.13050481,2000.8
    1ph 230500.14050401,4500.8
    -H1ph 220600.13055401,4500.8
    1ph 230600.14055401,4500.8
    -S3ph 220 500.07685481,200-
    600.06570401,450-
    -S33ph 380 500.04485481,200-
    600.03870401,450-
    3015□7015GN
    A
    -A1ph 100 500.350901251,2006.0
    600.330851051,4506.0
    -E1ph 110600.300651051,4505.0
    1ph 120600.320651051,4505.0
    -C1ph 220 500.180901251,2001.2
    1ph 230 500.200901251,2001.2
    -H1ph 220600.160651051,4501.2
    1ph 230600.150701051,4501.2
    -S3ph 220 500.1402201251,200-
    600.1201801051,450-
    -S33ph 380 500.0802201251,200-
    600.0701801051,450-
    4025□8025GN
    A
    -A1ph 100 500.5001202001,2508.0
    600.5501201651,5508.0
    -E1ph 110600.4501201651,5507.0
    1ph 120600.5001201651,5507.0
    -C1ph 220 500.2501202001,2501.8
    1ph 230 500.2301202001,2501.8
    -H1ph 220600.2301201651,5501.8
    1ph 230600.2301201651,5501.8
    -S3ph 220 500.1853502001,250-
    600.1702501651,550-
    -S33ph 380 500.1063502001,250-
    600.0982501651,550-
    5040□9040GN
    A
    -A1ph 100 500.652203151,25012.0
    600.72202601,55012.0
    -E1ph 110600.552002601,5508.0
    1ph 120600.62002601,5508.0
    -C1ph 220 500.352203151,2502.5
    1ph 230 500.42203151,2502.5
    -H1ph 220600.352002601,5502.5
    1ph 230600.42002601,5502.5
    -S3ph 220 500.38003151,250-
    600.256602501,550-
    -S33ph 380 500.178003151,250-
    600.146602501,550-
    5060□9060GN
    GU
    A
    -A1ph 100 5013204701,25020.0
    601.13203801,55020.0
    -E1ph 110600.83003801,55012.0
    1ph 120600.853003801,55012.0
    -C1ph 220 500.53404701,2504.0
    1ph 230 500.553404701,2504.0
    -H1ph 220600.53403801,5504.0
    1ph 230600.553403801,5504.0
    -S3ph 220 500.451,0004701,250-
    600.48003801,550-
    -S33ph 380 500.261,0004701,250-
    600.238003801,550-
    5090□9090GU
    A
    -A1ph 100 501.554507001,25025.0
    601.854505701,55025.0
    -E1ph 110601.45005701,55020.0
    1ph 120601.455005701,55020.0
    -C1ph 220 500.724507001,2505.0
    1ph 230 500.74507001,2505.0
    -H1ph 220600.714505701,5505.0
    1ph 230600.754505701,5505.0
    -S3ph 220 500.61,3507001,250-
    600.551,1005701,550-
    -S33ph 380 500.351,3507001,250-
    600.321,1005701,550-
    5120□90120GU
    A
    -A1ph 100 502.16009301,25030.0
    602.56007501,55030.0
    -E1ph 110601.656007501,55025.0
    1ph 120601.86007501,55025.0
    -C1ph 220 5016509301,2507.0
    1ph 230 500.956509301,2507.0
    -H1ph 2206016007501,5507.0
    1ph 230600.956007501,5507.0
    -S3ph 220 500.71,8509301,250-
    600.61,6007501,550-
    -S33ph 380 500.41,8509301,250-
    600.351,6007501,550-
    6120□104120GU
    A
    -A1ph 100 502.16009301,25030.0
    602.56007501,55030.0
    -E1ph 110601.76007501,55020.0
    1ph 120601.86007501,55020.0
    -C1ph 220 500.957509301,2508.0
    1ph 230 500.957509301,2508.0
    -H1ph 220600.957007501,5508.0
    1ph 2306017007501,5508.0
    -S3ph 220 500.752,2008901,300-
    600.72,0007301,600-
    -S33ph 380 500.432,2008901,300-
    600.42,0007301,600-
    6140□104140GU
    A
    -A1ph 100 502.77001,0801,25035.0
    6037008701,55035.0
    -E1ph 110601.87008501,60025.0
    1ph 120601.957008501,60025.0
    -C1ph 220 501.058501,0401,35010.0
    1ph 230 501.158501,0401,35010.0
    -H1ph 220601.057508501,60010.0
    1ph 230601.157508501,60010.0
    -S3ph 220 500.852,7001,0801,250-
    600.752,2008701,550-
    -S33ph 380 500.492,7001,0801,250-
    600.432,2008701,550-
    6200□104200GU
    A
    -A1ph 100 503.29001,5201,25045.0
    603.59001,2301,55045.0
    -E1ph 110602.758501,2301,55035.0
    1ph 120602.658501,2301,55035.0
    -C1ph 220 501.41,0001,5201,25010.0
    1ph 230 501.41,0001,5201,25010.0
    -H1ph 220601.49001,2301,55010.0
    1ph 230601.49001,2301,55010.0
    -S3ph 220 501.23,4001,5201,250-
    6012,7001,2301,550-
    -S33ph 380 500.693,4001,5201,250-
    600.582,7001,2301,550-
     
    ■ 2-Pole Voltage (EA-IMB)
    ❶ ❷  ❸❹   
    Type NoFlange
    Size
    Output
    [W]
    Shaft End
    Shape
    Input V
    Code
    VoltageFrequencyStarting
    Current
    Starting
    Torque
    Rated
    Torque
    SpeedCapacitor
    [V][Hz][A][mN・m][mN・m][r/min][μF]
    2006□606A-B1ph 110 500.1835222,6503
    600.2035183,1003
    -D1ph 220 500.1135222,6500.8
    600.1235183,1000.8
    3015□7015A-B1ph 110 500.3865542,6506
    600.4065463,1006
    -D1ph 220 500.1865462,6501.5
    600.2265543,1001.5
    4025□8025A-B1ph 110 500.5590902,65010
    600.6590773,10010
    -D1ph 220 500.2590902,6502
    600.3090773,1002
    -T3ph 220 500.20220882,700-
    600.15185753,200-
    -T33ph 380 500.11220882,700-
    600.08185753,200-
    4040□8040A-B1ph 110 500.801201472,60012
    600.851201233,10012
    -D1ph 220 500.401201472,6003
    600.451201233,1003
    -T3ph 220 500.273501472,600-
    600.223001233,100-
    -T33ph 380 500.153501472,600-
    600.133001233,100-
    5040□9040A-B1ph 110 500.751401472,60010
    600.901401233,10010
    -D1ph 220 500.381401442,6503
    600.401401203,2003
    -T3ph 220 500.263501472,600-
    600.213001233,100-
    -T33ph 380 500.153501472,600-
    600.123001233,100-
    5060□9060A-B1ph 110 501.051702152,65015
    601.001701803,20015
    -D1ph 220 500.521802152,6504
    600.551801803,2004
    -T3ph 220 500.355002152,650-
    600.304201803,200-
    -T33ph 380 500.205002152,650-
    600.104201803,200-
    5090□9090A-B1ph 110 501.502503252,65025
    601.802502703,20025
    -D1ph 220 500.722503252,6506
    600.902502703,2006
    -T3ph 220 500.508003252,650-
    600.426702703,200-
    -T33ph 380 500.298003252,650-
    600.246702703,200-
    5120□90120A-B1ph 110 501.853304502,65030
    602.253303603,20030
    -D1ph 220 500.953304502,6506
    601.103303603,2006
    -T3ph 220 500.651,0004302,650-
    600.509003703,100-
    -T33ph 380 500.371,0004302,650-
    600.299003703,100-
    5150□90150A-B1ph 110 502.504005402,65035
    602.854004503,20035
    -D1ph 220 501.204005402,65010
    601.524004503,20010
    -T3ph 220 500.851,2505502,600-
    600.701,1004603,100-
    -T33ph 380 500.491,2505502,600-
    600.401,1004603,100-

    ○ Allowable Torque When a Gearhead Is Mounted

    • Please purchase gearheads and mid-gearheads either by specifying additional machining for the motor or from the standalone product page (AC Motor Gearhead EA Series).
    • When the additional machining code GH is specified, the gear ratio is entered in the box (□) within the model number.
    • Combinations shown in the yellow cells ( )indicate that the output rotation direction is opposite to that of the motor. All other combinations have the same rotation direction.
    • The rotational speed is a reference value calculated by dividing the motor’s synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
    • The actual rotational speed decreases by approximately 2–20% from the listed value depending on the load.
    • If a greater gear ratio than those listed in the table is required, please add a mid-gearhead with a gear ratio of 10 between the motor and the gearhead.
      In this case, the allowable torque is 20 N·m.

    ■ Allowable Torque Table (4-Pole Voltage)
    Type
    (Motor/Gearhead)
    Allowance Torque Unit
    Gear Ratio33.6567.591012.51518202530364050607590100120150180200
    50HzSpeed
    r/min
    500417300250200166150120100837560504137302520161512.5108.37.5
    60Hz600500360300240200180144120100907260504536302420181512109
    EA-IMA2006-GN50HzN・m0.120.140.190.230.290.350.390.490.580.700.750.881.101.301.391.601.902.402.903.003.003.003.003.00
    kgf・cm1.221.431.942.352.963.573.985.005.927.147.658.9811.213.314.216.319.424.529.630.030.030.030.030.0
    60HzN・m0.100.120.160.190.240.290.320.410.490.580.620.730.881.101.151.301.602.002.402.603.003.003.003.00
    kgf・cm1.021.221.631.942.452.963.264.185.005.926.327.458.9811.211.713.316.320.424.526.530.030.030.030.0
    EA-IMA3015-GN50HzN・m0.300.360.510.610.760.910.971.301.501.801.942.302.703.303.484.105.005.005.005.005.005.005.005.00
    kgf・cm3.063.675.206.227.759.289.9013.215.318.319.823.427.533.735.541.850.050.050.050.050.050.050.050.0
    60HzN・m0.260.310.430.510.640.770.801.101.301.501.641.902.302.802.883.504.205.005.005.005.005.005.005.00
    kgf・cm2.653.164.385.206.537.858.1611.213.215.316.719.323.428.529.435.742.850.050.050.050.050.050.050.0
    EA-IMA4025-GN50HzN・m0.490.580.810.971.201.501.552.002.402.903.173.704.405.305.576.607.908.008.008.008.008.008.008.00
    kgf・cm5.005.918.269.8912.215.315.820.424.429.632.337.744.954.156.867.380.080.080.080.080.080.080.080.0
    60HzN・m0.400.480.670.801.001.201.251.702.002.402.643.003.604.304.495.406.508.008.008.008.008.008.008.00
    kgf・cm4.084.896.838.1610.212.212.817.320.424.426.930.636.743.845.855.166.380.080.080.080.080.080.080.0
    EA-IMA5040-GN50HzN・m0.770.921.301.501.902.302.383.203.804.604.885.706.908.308.5710.010.010.010.010.010.010.010.010.0
    kgf・cm7.859.3813.215.319.423.424.332.638.746.949.858.170.484.787.4100100100100100100100100100
    60HzN・m0.630.761.101.301.601.902.002.603.203.804.074.705.706.807.198.6010.010.010.010.010.010.010.010.0
    kgf・cm6.427.7511.213.216.319.320.426.532.638.741.547.958.169.373.487.7100100100100100100100100
    EA-IMA5060-GN50HzN・m1.101.401.902.302.903.403.574.805.706.807.038.6010.010.010.010.010.010.010.010.010.010.010.010.0
    kgf・cm11.214.219.323.429.634.736.448.958.169.371.787.7100100100100100100100100100100100100
    60HzN・m0.921.101.501.802.302.802.993.804.605.505.706.908.3010.010.010.010.010.010.010.010.010.010.010.0
    kgf・cm9.3811.215.318.323.428.530.538.746.956.158.270.184.7100100100100100100100100100100100
    EA-IMA5060-GU
    EA-IMA5060-GU
    50HzN・m1.101.401.902.302.903.403.614.805.706.807.128.6010.010.311.612.415.518.620.020.020.020.020.020.0
    kgf・cm11.214.219.323.429.634.736.848.958.169.372.687.7100105118126158189200200200200200200
    60HzN・m0.921.101.501.802.302.803.013.804.605.505.736.908.308.309.7010.012.515.018.820.020.020.020.020.0
    kgf・cm9.3811.215.318.323.428.530.738.746.956.158.470.184.784.698.9102127153192200200200200200
    EA-IMA5090-GU50HzN・m1.102.002.803.404.305.105.316.407.709.209.5511.613.616.618.120.020.020.020.020.020.020.020.020.0
    kgf・cm17.320.428.634.743.952.054.265.378.693.397.4118142169184200200200200200200200200200
    60HzN・m1.401.702.302.803.504.204.435.206.207.507.819.4011.313.514.518.820.020.020.020.020.020.020.020.0
    kgf・cm14.317.323.528.635.742.945.253.163.376.579.695.9115138148192200200200200200200200200
    EA-IMA5120-GU50HzN・m2.302.703.804.505.606.807.018.5010.212.212.515.318.420.020.020.020.020.020.020.020.020.020.020.0
    kgf・cm23.427.538.745.957.169.371.586.7104124128156187200200200200200200200200200200200
    60HzN・m1.802.203.003.604.605.505.736.808.209.8010.112.414.917.819.520.020.020.020.020.020.020.020.020.0
    kgf・cm18.322.430.636.746.956.158.569.583.6100103126152181199200200200200200200200200200
    EA-IMA6120
    -GU-(AF, EF, HF)
    50HzN・m2.222.603.604.305.406.506.428.109.7011.711.614.717.621.123.229.435.240.040.040.040.040.040.040.0
    kgf・cm2.4026.536.743.855.066.365.687.698.8119118149179215236300359400400400400400400400
    EA-IMA6120
    -GU-SF
    60HzN・m1.802.203.003.604.405.305.206.708.009.609.4012.014.517.318.824.128.936.140.040.040.040.040.040.0
    kgf・cm18.322.430.636.744.854.053.368.381.697.995.9122148176192245295368400400400400400400
    EA-IMA6140
    -GU-(AF, SF, EF)
    50HzN・m2.503.004.205.106.307.607.209.5011.413.713.017.220.624.726.034.340.040.040.040.040.040.040.040.0
    kgf・cm25.530.642.852.063.277.573.696.9116139133175210252265349400400400400400400400400
    EA-IMA6140
    -GU-HF
    60HzN・m2.102.503.404.105.206.206.107.809.3011.211.012.016.820.222.028.033.740.040.040.040.040.040.040.0
    kgf・cm21.425.534.641.853.063.262.279.594.8114112122171206224285343400400400400400400400
    EA-IMA6200-GU50HzN・m3.714.466.197.439.2811.111.913.916.720.120.825.230.336.340.040.040.040.040.040.040.040.040.040.0
    kgf・cm37.945.563.175.894.7114121142171205212257309370400400400400400400400400400400
    60HzN・m2.993.594.995.997.498.989.7011.213.516.217.220.324.429.340.040.040.040.040.040.040.040.040.040.0
    kgf・cm30.636.750.961.176.491.798.9115138165175207249299400400400400400400400400400400
     
    Alterations
     
    AlterationsGearhead Set PurchaseMid-Gear Set Purchase
    CodeGHGH10X
    Spec.You can purchase a gearhead set that matches the motor size and gear type.
    Please check the gearhead specification table to confirm the available gear ratios based on the motor flange number.

    [ ! ] Available gear ratios: for flange □42 → 1/3 to 1/60, others → 1/3 to 1/200.
    [Designation method] Gear ratio 1/30 → GH30
    You can purchase a mid-gear set that matches the motor size.
    When combined with a gearhead, a greater gear ratio can be achieved.

    [ ! ] Only a gear ratio of 1/10 is available.
    [Designation method] GN10X
    1 Code (Price per Code)Check on WebCheck on Web
    Product Features
    Feature 1: In general, a “micro induction motor” refers to a motor that rotates by electromagnetic induction.
    Induction motors use a capacitor and electromagnetic induction during startup and operation. Although the starting torque is not very high, they have a simple structure, high efficiency, and are capable of continuous rotation.
    Feature 2: Single-phase motors generate reverse torque during operation, allowing the rotation direction to be switched within a short time. However, the motor must be completely stopped before changing the rotation direction.
    Feature 3: Three-phase motors operate using a three-phase power supply. They are characterized by high efficiency and high starting torque.
    Viewed Products
    Recently Viewed Products
    My Components
    My Components
    0
    Cart
    Cart
    Economy Series
    MRO Product

    Chat with MISUMI

    Chat service is available for any inquiry to MISUMI

    Service hours

    9:00 - 18:00 (Mon-Sat)

    For out of service hours, you can leave a message to us.
    We will reply to your inquiries on the next business day.
    (except Sundays and public holidays).

    Noted for use

    Chat service is for Corporate customers and limited for Thai language.

    Request for Quotation and Place Order is not available on Chat.

    Start chat

    Small AC Induction Motors 6-200W | MISUMI | MISUMI Thailand