(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก
Bevel Gears（Shaft Bore Config.：Round hole）
Configure
Specification/Dimensions
-
Module
-
Number of Teeth(Teeth)
-
Shaft Bore Dia. d(Ø)
-
Reduction Ratio
-
Material
- General Steel
- Stainless Steel
- Brass
- Plastic
- Cast Products
-
Heat Treatment
- Not Provided
- Induction Hardened
- Carburizing
- Normalized
-
Ground Tooth
- Not Provided
- Provided
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Tooth Width B(mm)
-
Accuracy(* New JIS)
-
Shaft Bore Tolerance
-
Shaft Bore Config.
-
Round hole -
Round hole+tap -
Keyway -
Keyway + Tap
-
|
Shape
|
|
|---|---|
Brand |
|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 39 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KYOUIKU GEAR MFG（KG）
Bevel gear for transmitting power through orthogonal shafts and transmitting the rotation with high-accuracy.
[Features]
· Straight type tooth profiles. Types with machined screw holes or keyways also available.
· High-frequency hardened products with "H" attached at the end of the part number are also available.
· Gears for changing the shaft angle by 90°, and accurately transmitting the rotation.
· Module 0.5/0.8/1.0/1.25/1.5/2.0/2.5/3.0/4.0/5.0.
· Pressure angle 20°, Gear ratio 1:2 and 1:3.
· Gear precision is between JISB1704 class 3 to 4 (Induction hardened gear products: Class 4).
[Applications]
· Suited for equipment power transmission, drive and transport parts.From: ฿ 310.68 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, precision JISB1704 grade 4 miter.
[Features]
· Since parts other than the teeth are subjected to a carburizing treatment, alteration such as hole, keyway slotting and tap machining can be carried out by the client.
· Superior strength and abrasion-resistance compared to SM miter; alteration is also possible.
[Applications]
· For use in orthogonal axis, various mechanisms, machine tools, measuring instruments, etc.From: ฿ 1,136.08 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
[Materials]·S45C. [Tooth Profile/Precision]·Full teeth, JISN8 class (former JIS4 class).From: ฿ 350.64 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SCM415 made, induction hardened tooth part, precision JISB1704 grade 1 ground spiral bevel gear. Since parts other than the teeth are subjected to a carburizing treatment, additional machining can be carried out. High-precision, high-strength, high-speed rotation ground spiral bevel gear. Attention to thrust direction should be given when using.From: ฿ 4,173.19 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 high precision miter.
Excellent quietness due to SM crowning method, achieving low cost miter.From: ฿ 418.03 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 high precision miter.
Excellent quietness due to SM crowning method, achieving low cost miter.From: ฿ 452.07 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Bevel Gear Round Hole, Round Hole + Tap, Keyway Hole, Keyway Hole + Tap
KYOUIKU GEAR MFG（KG）
Bevel gear for transmitting power through orthogonal shafts and transmitting the rotation with high-accuracy.
[Features]
· Straight type tooth profile, can be used for machining screw holes and keyways.
· High-frequency hardened products with "H" attached at the end of the part number are also available.
· Module 0.5/0.8/1.0/1.25/1.5/2.0/2.5/3.0/4.0/5.0.
· Pressure angle 20°, Gear ratio 1:1.
· Gear accuracy is between JISB1704 3 to 4 grade (induction hardened gear products: Grade 4).
[Applications]
· Suited for equipment power transmission, drive and transport parts.From: ฿ 300.16 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 20T:40T.From: ฿ 411.28 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KYOUIKU GEAR MFG（KG）
SUS304 made for excellent corrosion resistance. Module 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0. Tapped at 2 points, directly mountable product also available.From: ฿ 924.73 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
JIS B 1704 grade 3 spiral bevel gear. Module m1.0 / 1.5 / 2.0 / 2.5 / 3.0. Gear ratio 1: 2, 1: 3. High-strength, induction hardened teeth products also (JIS grade 4) also available.
Directly mountable, tapped and slotted keyway machined product also available. Material S45C.From: ฿ 341.77 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
SMF5040 made, high precision sintered gear, porous and retains lubricity. Saves machining and reduces costs, JISB 1704, grade 5 high precision bevel gear.From: ฿ 154.82 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
S45C made, induction hardened tooth surface, precision JISB1704 grade 4 ground spiral bevel gear. Parts other than the teeth section can be additionally machined, such as shaft hole. Spiral bevel gear. Select the combination according to the speed ratio, using care in the thrust direction.From: ฿ 679.02 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 15T:30T.From: ฿ 379.50 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KATAYAMA CHAIN
Katayama Chain bevel gear K standard miter gear. [Materials]·General steel materialsFrom: ฿ 302.49 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
SUM Stainless Steel Miter Gear
KOHARA GEAR INDUSTRY
SUS303 made, precision JISB1704 grade 3 high-precision stainless steel miter. Miter aimed at cost reduction, and quiet due to coniflex teeth form. Use in rust intolerant locations.From: ฿ 810.21 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 bevel gear with shaft. Pinion gear has been subjected to thermal refining to increase toughness, and a reduction ratio of 1/5 is achievable in one-step. The shaft part can be machined to any shape.From: ฿ 1,039.83 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 20T:30T.From: ฿ 418.54 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Precision JISB1704 grade 2 gear grinding spiral miter.
[Features]
· Teeth grinding spiral miter made with S45C carbon steel, with teeth grinding processing after induction hardening of teeth surface.
· Alterations for parts other than toothing are available.
· The industry's first m1 size standardized, high-accuracy, high-strength, high-speed rotation oriented grinding bevel gear.
*Please note before ordering that it is not sold as a set, but in separate units.
[Applications]
· Orthogonal axes.
· Ideal for high speed revolving various mechanisms, machine tools, etc.From: ฿ 2,534.32 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Angular miter with arbitrary shaft angle set unlike regular miter (90° shaft angle).
[Features]
· Standardized shaft angles of 45°, 60°, and 120°.
· The same part number is used for pairs.
· The material used is S45C.
· Alterations are also possible.
[Applications]
· Transmission on non-orthogonal axes.
· For various mechanisms, machine tools, measuring instruments, etc.From: ฿ 636.06 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Bevel Gear, High Ratio Hypoid Gear
KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, precision JISB1704 grade 3 spiral miter. A high reduction ratio of 1/15 to 1/200 on the linear axis can be achieved in one step. Since parts other than the teeth are subjected to a carburizing treatment, additional work such as bore hole and shaft part machining can be carried out.From: ฿ 1,907.28 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Bevel gear made with stainless steel SUS303. Recommended for rust-intolerant applications such as food machines, chemical machines, electronic equipment etc.From: ฿ 978.73 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Bevel gear of SUS304 stainless steel rod.
[Features]
· Module 0.8/1.0/1.5/2.0 Pressure angle 20 degrees (full depth teeth).
· SUS304 material demonstrates excellent corrosion-resistance.
· Products with threaded holes can be used immediately.
· Tooth ratio of 1:2.
[Applications]
· Equipment power transmission, drive and conveyance parts.
· For the semiconductor and food industry jobs.From: ฿ 912.01 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KYOUIKU GEAR MFG（KG）
Induction hardening applied to tooth portion JIS B 1704 grade 2 high-precision spiral miter gear. Slotted keyway, tapped, directly mountable type also available. Ideal for compact design with 19 teeth and 23 teeth.
[Additional processing possible]· As only tooth part is hardened, additional work avoiding teeth section such as keyway slotting, tap, hole diameter changes etc. can be carried out.From: ฿ 3,063.10 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 15T: 60T.From: ฿ 451.63 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
[Materials]·S45C. [Tooth Profile/Precision]·Full teeth, JISN8 class (former JIS4 class).From: ฿ 448.36 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
Material: S45C, quenched tooth surface part, precision JISB1704 grade 4 spiral miter. Reasonably priced spiral miter, with parts other than the teeth section that can be additionally machined, such as shaft hole.From: ฿ 624.57 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
MC901 made, precision JISB1704 grade 4 plastic miter. High performance plastic gear with excellent quietness due to coniflex teeth form, and can be used without lubrication. As material expands and contracts depending on temperature and humidity, set proper backlash to use.From: ฿ 482.50 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Nissei Bevel Gears, Ground Spiral Bevel Gear
KOHARA GEAR INDUSTRY
Precision JISB1704 grade 0 ground tooth spiral miter. Carburized and quenched GF finished type with slotted keyway, and a GU type with a bottom hole available. Select according to the intended use. High-precision, high-strength, high-speed rotation ground spiral bevel gear.From: ฿ 13,878.17 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Nissei Bevel Gear, Grinding Spiral Gear
KOHARA GEAR INDUSTRY
Precision JISB1704 grade 0 ground tooth spiral bevel gear. Carburized and quenched GF finished type with slotted keyway, and a GU type with a bottom hole available. High precision, high strength, high speed rotation.From: ฿ 16,206.65 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 15T: 45T.From: ฿ 417.77 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KYOUIKU GEAR MFG（KG）
JIS B 1704 grade 3 spiral miter gear. Module m1.0 / 1.5 / 2.0 / 2.5 / 3.0. High-strength, induction hardened teeth products also (JIS grade 4) also available. Directly mountable, tapped and slotted keyway machined product also available. Material S45C.From: ฿ 351.14 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Spiral miter gear with an accuracy of JISB17041 grade.
[Features]
· Material: SCM415, carburized and quenched tooth part, tooth surface hardness ranges from HRC55 to 60.
· Excellent strength, abrasion-resistance, high speed and high torque transmission, compact design possible.
[Applications]
· Used for orthogonal axis, various mechanisms, high-speed rotating parts of machine tools, etc.From: ฿ 4,042.29 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
S45C made, induction hardened tooth surface, precision JISB1704 grade 2 ground spiral bevel gear. Parts other than teeth section can be additionally machined. Ground spiral bevel gear demonstrating quietness at high speed, with high precision.From: ฿ 2,246.23 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
KYOUIKU GEAR MFG（KG）
Miter gear with fastening mechanism. Keyway slot and other machining for shaft not required, making adjustments easy during assembly.
Module 0.8/ 1.0 / 1.5 / 2.0. Excellent corrosion resistance SUS304, S45C series.From: ฿ 833.54 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
AOKI SEIMITSU KOGYO
Gear that is often used to rotate the orthogonal axis. Combination of number of teeth 18T: 36T.From: ฿ 560.19 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Spiral miter gear subjected to anti-carburizing treatment, except for the teeth, which makes alteration, such as shaft bore machining, possible.
[Features]
· Superior strength and abrasion-resistance compared to SM miter; alteration is also possible.
· *Please note before ordering that it is not sold as a set, and must be purchased in separate units.
[Applications]
· Orthogonal axes.
· For various mechanisms, machine tools, measuring instruments, etc.From: ฿ 1,377.72 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
KOHARA GEAR INDUSTRY
Duracon® material (M90-44), precision JISB1704 grade 6 molded miter.
Low-cost injection molded with sizes M0.5 to 1.5.
Oil-less bush is also available when using it with a diameter smaller than the inner diameter.
Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.From: ฿ 100.96 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
MC901 made, precision JISB1704 grade 4 plastic bevel gear. High performance plastic bevel gear with excellent quietness due to coniflex teeth form, and can be used without lubrication.From: ฿ 525.97 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025KOHARA GEAR INDUSTRY
Duracon® material (M90-44), precision JISB1704 grade 6 molded bevel gear. Low-cost injection molded gear with sizes M0.5 to 1. Oil-less bush is also available when using it with a diameter smaller than the inner diameter.
Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.From: ฿ 92.39 Special Price Days to Ship:
Same day
Same day
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Shape |
| Module |
| Number of Teeth(Teeth) |
| Shaft Bore Dia. d(Ø) |
| Reduction Ratio |
| Material |
| Heat Treatment |
| Ground Tooth |
| Surface Treatment |
| Tooth Width B(mm) |
| Accuracy(* New JIS) |
| Shaft Bore Tolerance |
| Shaft Bore Config. |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025     | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | |
| Brand | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG（KG） | AOKI SEIMITSU KOGYO | KYOUIKU GEAR MFG（KG） | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | AOKI SEIMITSU KOGYO | KATAYAMA CHAIN | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG（KG） | KYOUIKU GEAR MFG（KG） | AOKI SEIMITSU KOGYO | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | AOKI SEIMITSU KOGYO | KYOUIKU GEAR MFG（KG） | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KYOUIKU GEAR MFG（KG） | AOKI SEIMITSU KOGYO | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY |
| Product Series | Bevel Gear Round Hole, Round Hole + Tap, Keyway Hole, Keyway Hole + Tap | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| From | ฿ 310.68 Special Price On Sale Until 31/03/2025 | ฿ 1,136.08 Special Price On Sale Until 31/03/2025 | ฿ 350.64 | ฿ 4,173.19 | ฿ 418.03 Special Price On Sale Until 31/03/2025 | ฿ 452.07 Special Price On Sale Until 31/03/2025 | ฿ 300.16 Special Price On Sale Until 31/03/2025 | ฿ 411.28 | ฿ 924.73 Special Price On Sale Until 31/03/2025 | ฿ 341.77 | ฿ 154.82 | ฿ 679.02 Special Price On Sale Until 31/03/2025 | ฿ 379.50 Special Price On Sale Until 31/03/2025 | ฿ 302.49 | ฿ 810.21 | ฿ 1,039.83 | ฿ 418.54 Special Price On Sale Until 31/03/2025 | ฿ 2,534.32 | ฿ 636.06 | ฿ 1,907.28 Special Price On Sale Until 31/03/2025 | ฿ 978.73 | ฿ 912.01 | ฿ 3,063.10 Special Price On Sale Until 31/03/2025 | ฿ 451.63 | ฿ 448.36 | ฿ 624.57 Special Price On Sale Until 31/03/2025 | ฿ 482.50 Special Price On Sale Until 31/03/2025 | ฿ 13,878.17 | ฿ 16,206.65 | ฿ 417.77 | ฿ 351.14 Special Price On Sale Until 31/03/2025 | ฿ 4,042.29 | ฿ 2,246.23 | ฿ 833.54 | ฿ 560.19 | ฿ 1,377.72 | ฿ 100.96 | ฿ 525.97 Special Price On Sale Until 31/03/2025 | ฿ 92.39 Special Price On Sale Until 31/03/2025 |
| Days to Ship | Same day | Same day | Same day | 4 Day(s) | Same day | Same day | Same day | 3 Day(s) | Same day | 3 Day(s) | Same day | Same day | Same day | 10 Day(s) | Same day | Same day | Same day | 3 Day(s) | 3 Day(s) | Same day | 3 Day(s) | 3 Day(s) | Same day | 3 Day(s) | 6 Day(s) | Same day | Same day | 4 Day(s) | 4 Day(s) | 3 Day(s) | Same day | 4 Day(s) | 4 Day(s) | Same day | 6 Day(s) | Same day | 3 Day(s) | Same day | Same day |
| Shape | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Hypoid Gears | Straight Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Straight Bevel Gears |
| Module | 0.5 ～ 4 | 2 ～ 5 | 1 ～ 6 | 2 ～ 4 | 1 ～ 8 | 1 ～ 8 | 0.5 ～ 4 | 1 ～ 4 | 0.8 ～ 3 | 1 ～ 3 | 0.8 ～ 1.5 | 1 ～ 5 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 1.5 ～ 3 | 1 ～ 5 | 1 ～ 5 | 1.5 ～ 3 | 1 ～ 1.5 | 1.5 ～ 3 | 1 ～ 2 | 2.5 | 1 ～ 3 | 1 ～ 3 | 1 ～ 8 | 1 ～ 4 | 1.5 ～ 6 | 2 ～ 3.5 | 1 ～ 4 | 1 ～ 3 | 2 ～ 4 | 2 ～ 4 | 0.8 ～ 2 | 1.5 ～ 4 | 2 ～ 5 | 0.5 ～ 1.5 | 1 ～ 3 | 0.5 ～ 1 |
| Number of Teeth(Teeth) | 15 ～ 45 | 20 ～ 30 | 20 ～ 30 | 20 ～ 40 | 16 ～ 30 | 15 ～ 60 | 20 ～ 30 | 20 ～ 40 | 20 ～ 30 | 15 ～ 45 | 20 | 15 ～ 60 | 15 ～ 30 | 20 ～ 30 | 20 ～ 30 | 12 ～ 60 | 20 ～ 30 | 20 ～ 30 | 20 | 1 ～ 60 | 15 ～ 45 | 18 ～ 40 | 23 | 15 ～ 60 | 20 ～ 30 | 20 ～ 30 | 20 ～ 25 | 20 ～ 30 | 15 ～ 34 | 15 ～ 45 | 20 ～ 30 | 20 ～ 30 | 15 ～ 45 | 20 ～ 30 | 18 ～ 36 | 20 ～ 30 | 20 | 15 ～ 45 | 20 ～ 40 |
| Shaft Bore Dia. d(Ø) | 3 ～ 22 | 12 ～ 28 | 6 ～ 30 | 12 ～ 25 | 6 ～ 30 | 6 ～ 35 | 3 ～ 22 | 6 ～ 20 | 5 ～ 18 | 6 ～ 35 | 4 ～ 6 | 6 ～ 30 | 6 ～ 15 | 6 ～ 28 | 6 ～ 28 | 12 ～ 25.25 | 6 ～ 25 | 6 ～ 28 | 8 ～ 16 | 12 ～ 36.1 | 8 ～ 20 | 6 ～ 15 | 15 | 6 ～ 18 | 6 ～ 22 | 6 ～ 30 | 6 ～ 20 | 10 ～ 40 | 10 ～ 26 | 6 ～ 20 | 6 ～ 22 | 12 ～ 28 | 10 ～ 20 | 5 ～ 15 | 8 ～ 22 | 12 ～ 28 | 3 ～ 8 | 6 ～ 20 | 3 ～ 6 |
| Reduction Ratio | 2 ～ 3 | 1 | 1 | 2 | 1 | 1.5 ～ 4 | 1 | 2 | 1 | 2 ～ 3 | 1 | 1.5 ～ 4 | 2 | 1 | 1 | 5 | 1.5 | 1 | 1 | 15 ～ 60 | 1.5 ～ 3 | 2 | 1 | 4 | 1 | 1 | 1 | 1 | 1.5 ～ 2 | 3 | 1 | 1 | 1.5 ～ 3 | 1 | 2 | 1 | 1 | 1.5 ～ 3 | 2 |
| Material | General Steel / Brass | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel / Brass / Plastic | General Steel | Stainless Steel | General Steel | Cast Products | General Steel | General Steel | General Steel | Stainless Steel | General Steel | General Steel | General Steel | General Steel | General Steel | Stainless Steel | Stainless Steel | General Steel | General Steel | General Steel | General Steel | Plastic | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel / Stainless Steel | General Steel | General Steel | Plastic | Plastic | Plastic |
| Heat Treatment | Not Provided / Induction Hardened | Carburizing | Normalized | Carburizing | Not Provided | Not Provided | Not Provided / Induction Hardened | Normalized | Not Provided | Not Provided / Induction Hardened | Not Provided | Induction Hardened | Normalized | Not Provided | Not Provided | Not Provided | Normalized | Induction Hardened | Not Provided | Carburizing | Not Provided | Not Provided | Induction Hardened | Normalized | Normalized | Induction Hardened | Not Provided | Carburizing | Carburizing | Normalized | Not Provided / Induction Hardened | Carburizing | Induction Hardened | Not Provided | Normalized | Carburizing | Not Provided | Not Provided | Not Provided |
| Ground Tooth | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Surface Treatment | Not Provided | Not Provided | Black Oxide | Not Provided | Black Oxide | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | Black Oxide | Not Provided | Black Oxide | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided |
| Tooth Width B(mm) | 3.2 ～ 25.8 | 9 ～ 30 | 6 ～ 35 | 14 ～ 27 | 5 ～ 35 | 6 ～ 50 | 2.5 ～ 18.6 | 5.7 ～ 28 | 3.7 ～ 13.6 | 5.7 ～ 20 | 4.24 ～ 8.48 | 6 ～ 35 | 5.5 ～ 22 | 5 ～ 25 | 5 ～ 25 | 12 ～ 22 | 6 ～ 30 | 5 ～ 30 | 5 ～ 22 | 6 ～ 10 | 9 ～ 23 | 5.7 ～ 12.6 | 11.5 | 8 ～ 24 | 6 ～ 22 | 5 ～ 35 | 5 ～ 20 | 7 ～ 38 | 9 ～ 22 | 7 ～ 28 | 4.5 ～ 18.6 | 9 ～ 25 | 11 ～ 28 | 3.7 ～ 8.5 | 9.8 ～ 25.8 | 9 ～ 30 | 2.5 ～ 7 | 6 ～ 23 | 2.5 ～ 4.5 |
| Accuracy(* New JIS) | Class 3 / Class 4 | Class 4 | Class 4 | Class 1 | Class 3 | Class 3 | Class 3 / Class 4 | Class 4 | Class 4 | Class 3 / Class 4 | Class 5 | Class 4 | Class 4 | - | Class 3 | Class 3 | Class 4 | Class 2 | Class 3 | Class 3 | Class 3 | Class 4 | Class 2 | Class 4 | Class 4 | Class 4 | Class 4 | Class 0 | Class 0 | Class 4 | Class 3 / Class 4 | Class 1 | Class 2 | Class 3 / Class 4 | Class 4 | Class 4 | Class 6 | Class 4 | Class 6 |
| Shaft Bore Tolerance | H7 / H8 | H7 | H7 | H7 | H7 | H7 | Not Specified / H7 / H8 | H7 | H7 / H8 | H7 / H8 | H8 | Not Specified | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 / H8 | H7 | H7 | H7 | Not Specified | Not Specified | H7 | H7 | H7 | H7 / H8 | H7 | H7 | H7 / H8 | H7 | H7 | Not Specified | - | Not Specified |
| Shaft Bore Config. | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole | Round hole |
Loading...
Application example related to this category
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?