(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
SANDVIK Holding Tools for O.D. Tuning
Configure
Specification/Dimensions
-
Applicable Tip Shape
-
Applicable Chip Clearance Angle
-
Selfishly
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Shank height(mm)
-
Shank width(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
- 197 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
[Features]
· It is an outer diameter turning tool with safety tip clamp and excellent repeatability.
· Chips can be discharged smoothly.
· Requires less space.
· Few components.
[Applications]
· For outer diameter turning operations.From: ฿ 6,451.00 Days to Ship: 
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
[Features]
· Double clamp holder with excellent rigidity for turning.
· Extremely easy to handle. With one wrench, tip and shims can be replaced.
· Easy tip replacement is also possible from the back of the holder.
· A wide range of tips can be attached by replacing clamp sets or shims.
[Applications]
· Outer diameter turning/negative insert supported.
· Support from rough machining to finish machining.From: ฿ 6,816.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik T-Max P Negative Tip Shank Bit
SANDVIK
[Features]
· The first recommended turning tool for outer diameter roughing and finishing, it has a negative insert and center hole, allowing speedy and accurate indexing.
[Applications]
· Outer diameter turning/negative insert supported.
· Support from rough machining to finish machining.From: ฿ 9,124.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DCLNR/LFrom: ฿ 5,030.24 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
[Features]
· Double clamp holder with excellent rigidity for turning.
· Extremely easy to handle. With one wrench, tip and shims can be replaced.
· Easy tip replacement is also possible from the back of the holder.
· A wide range of tips can be attached by replacing clamp sets or shims.
[Applications]
· Outer diameter turning/negative insert supported.
· Support from rough machining to finish machining.From: ฿ 6,289.41 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn RC Negative Tip Shank Bit
SANDVIK
[Features]
· Double clamp holder with excellent rigidity for turning.
· Extremely easy to handle. With one wrench, tip and shims can be replaced.
· Easy tip replacement is also possible from the back of the holder.
· A wide range of tips can be attached by replacing clamp sets or shims.
[Applications]
· Outer diameter turning/negative insert supported.
· Support from rough machining to finish machining.From: ฿ 6,467.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107 Positive Tip Shank Bit
SANDVIK
[Features]
· It is an outer diameter turning tool with safety tip clamp and excellent repeatability.
· Chips can be discharged smoothly.
· Requires less space.
· Few components.
[Applications]
· For outer diameter turning operations.From: ฿ 7,391.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,836.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MWLNR/L
SANDVIK
Excellent cutting chip control and process stability for one of the best part qualityFrom: ฿ 6,816.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 8,143.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,718.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CTFPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 4,940.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 4,807.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 9,124.00 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 9,560.07 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DVPNR/LFrom: ฿ 7,063.86 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Sandvik Outer Diameter Holder Small Lathe Tool Shank Bit QS Holding System Short Bit QS- SVABR/LFrom: ฿ 7,251.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1
SANDVIK
Quick change system specially developed for small automatic lathes
A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setupFrom: ฿ 7,251.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID
SANDVIK
Excellent chip control and process stability for best part qualityFrom: ฿ 19,317.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 4,807.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 5,650.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 5,650.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
SANDVIK
Achieving high productivity and low production costs, with excellent machined surface quality and dimensional tolerancesFrom: ฿ 19,711.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 14,292.47 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 11,285.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Negative Shank Bit for O.D.
SANDVIK
Outer diameter turning shank tool bit that realizes high productivity, high efficiency and high quality machining solutionsFrom: ฿ 14,279.84 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 11,380.23 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 9,733.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
COROMANT CAPTO, Cutting Head for CORO-TURN RC Negative Tip
SANDVIK
Unique shape exhibits high performanceFrom: ฿ 12,091.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 19,960.96 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 11,744.26 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 20,220.98 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 21,001.04 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PCLNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 4,718.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PCBNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 5,098.42 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PSKNR/
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 5,098.42 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit T-Max P Lever Clamp PSBNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 4,234.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 8,889.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shank Tool Bit / T-Max P Lever Clamp, PTGNR/L
SANDVIK
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.From: ฿ 4,234.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 14,967.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 19,960.96 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C3-MVJNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DDHNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 14,292.47 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DDJNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 14,292.47 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DDUNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DRSNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 14,292.47 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-DSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 13,481.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PCLNR/L-12HP
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 34,366.18 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PDJNR/L
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 16,372.65 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P, Turning Cutting Unit, C8-PRSCL
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 16,740.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PSDNN
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 15,446.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Cutting Unit For Turning, C-PSRNR/L-19HP
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 26,669.53 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P Shank Tool Bit For Turning, R/L170.35
SANDVIK
T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 7,895.93 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max P, Turning Cutting Unit, C8-PRSCR
SANDVIK
T-Max P series cutting unit for highly productive external turning of large to medium-sized partsFrom: ฿ 16,740.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, 177.9
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 6,231.79 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CSDPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,813.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CTGPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 8,268.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Shank Tool Bit For Turning, CTTPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 6,196.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Boring Tool Bit For Turning, R/L136.9
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 7,063.86 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max S Cartridge For Turning Tool, CSKPR/L
SANDVIK
T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,238.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max Shank Tool Bit For Turning, CSRNR/L
SANDVIK
T-Max Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 8,268.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
T-Max Shank Tool Bit For Turning, CTGNR/L
SANDVIK
T-Max Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 8,268.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 21,417.08 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 29,945.81 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn RC Double Clamp, DSSNR/L
SANDVIK
T-Max P Turning Shank Bits for a Productive, Efficient and Reliable Machining SolutionFrom: ฿ 5,607.73 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107, Shank Tool Bit for Positive Inserts
SANDVIK
For inner and outer diameter turning of slender parts
High repeatability insert exchange improves productivity and achieves high qualityFrom: ฿ 5,594.43 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 Cutting Unit For Turning, C-SRDCN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 24,589.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn 107 Cutting Unit For Turning, C-SVVBN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 17,204.72 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of itemsFrom: ฿ 20,272.98 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X
SANDVIK
CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of itemsFrom: ฿ 19,088.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn HP Cutting Head, Outer Diameter Turning - Tool Bit For Negative Inserts, C-PDUNR/L-HP
SANDVIK
Excellent cutting chip control and process stability for one of the best part quality
Accurate high-precision coolant supply controls cutting chip control and provides stable machiningFrom: ฿ 24,589.35 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP
SANDVIK
Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HPFrom: ฿ 19,232.89 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroPlex TT Multi-Function Turning Tool, C-TB-CN
SANDVIK
Equipped with 2 turning inserts in the same tool, greatly reducing tool change time
Space-saving tool pot in tool magazineFrom: ฿ 57,925.46 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRDCN
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSCR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 14,967.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL
SANDVIK
For internal and external turning of slender parts
Highly repeatable insert exchange improves productivity and achieves high qualityFrom: ฿ 21,627.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 21,627.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 14,967.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 13,371.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 16,691.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Unit, T-Max M Top Clamp, MVJNR/L
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 12,091.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12
SANDVIK
Tool that combines external turning and internal turning boring with two inserts in the same tool
Good chip control and long tool lifeFrom: ฿ 42,819.10 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 25,421.42 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 41,698.81 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP
SANDVIK
Coromant Capto is a unique coupling with a unique polygonal shape
The quick change of the lathe greatly contributes to the improvement of the user's productivity.From: ฿ 37,278.43 Days to Ship:
6 Day(s)
6 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Applicable Tip Shape |
| Applicable Chip Clearance Angle |
| Selfishly |
| Application |
| Clamp Shape |
| Shank height(mm) |
| Shank width(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MWLNR/L | Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR/L | Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SVJBR/L-E11-B1 | Shank Tool Bit, Outer Diameter Turning Ceramic Inserts, Top Clamp,CRDCN5040T-ID | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, STFCR/L-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-11 | Shank Tool Bit, Outer Diameter Turning Positive Inserts, CoroTurn, 107, SVJBR/L-K11/-K16-S | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CCRNR/L-12-4 | Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SRSCR/L-HP | Sandvik CoroTurn 107, Screw Clamp System, High Pressure Coolant Specification, C-SVUBR/L-HP | CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP | CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X | CoroTurn HP Cutting Head, Outer Diameter Turning - Tool Bit For Negative Inserts, C-PDUNR/L-HP | CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP | Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRDCN | Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSCR/L | Coromant Capto, Cutting Head, T-Max Ceramic Top Clamp, CRSNR/L | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRDCN | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, SRSCR/L | Coromant Capto, Cutting Head, CoroTurn 107 Screw Clamp, C-S-CN/BL | Coromant Capto, Cutting Head, CoroTurn RC Double Clamp, DDMNL | Coromant Capto, Cutting Head, CoroTurn Ceramic Inserts, CCLNR/L-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, CDJNR/L-15-4 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DCLNR/L-12-2 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, DDJNR/L-15-2 | Coromant Capto, Cutting Head, CoroTurn, Ceramic Inserts, C5-DSDNN-12-2 | Coromant Capto, Cutting Unit, Multi-Function Tool CoroPlex, TB C-TB-CN12CN12 | Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP | Sandvik CoroTurn 107, Screw Clamp, High Pressure Coolant Specification, C-SVMBR/L-HP | Coromant Capto, CoroTurn, Cutting Head, High Pressure Coolant Specification, C8-PCMNN-12HP | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 6,451.00 | ฿ 6,816.00 | ฿ 9,124.00 | ฿ 5,030.24 | ฿ 6,289.41 | ฿ 6,467.00 | ฿ 7,391.00 | ฿ 12,836.35 | ฿ 6,816.00 | ฿ 8,143.00 | ฿ 4,718.00 | ฿ 4,940.00 | ฿ 4,807.00 | ฿ 9,124.00 | ฿ 9,560.07 | ฿ 7,063.86 | ฿ 7,251.00 | ฿ 7,251.00 | ฿ 19,317.00 | ฿ 4,807.00 | ฿ 5,650.00 | ฿ 5,650.00 | ฿ 19,711.00 | ฿ 14,292.47 | ฿ 11,285.00 | ฿ 14,279.84 | ฿ 11,380.23 | ฿ 9,733.00 | ฿ 12,091.00 | ฿ 19,960.96 | ฿ 11,744.26 | ฿ 20,220.98 | ฿ 21,001.04 | ฿ 4,718.00 | ฿ 5,098.42 | ฿ 5,098.42 | ฿ 4,234.00 | ฿ 8,889.00 | ฿ 4,234.00 | ฿ 14,967.00 | ฿ 19,960.96 | ฿ 12,091.00 | ฿ 14,292.47 | ฿ 14,292.47 | ฿ 13,481.00 | ฿ 14,292.47 | ฿ 13,481.00 | ฿ 34,366.18 | ฿ 16,372.65 | ฿ 16,740.00 | ฿ 15,446.00 | ฿ 26,669.53 | ฿ 7,895.93 | ฿ 16,740.00 | ฿ 6,231.79 | ฿ 5,813.00 | ฿ 8,268.00 | ฿ 6,196.00 | ฿ 7,063.86 | ฿ 5,238.00 | ฿ 8,268.00 | ฿ 8,268.00 | ฿ 21,417.08 | ฿ 29,945.81 | ฿ 5,607.73 | ฿ 5,594.43 | ฿ 24,589.35 | ฿ 17,204.72 | ฿ 20,272.98 | ฿ 19,088.00 | ฿ 24,589.35 | ฿ 19,232.89 | ฿ 57,925.46 | ฿ 16,691.00 | ฿ 16,691.00 | ฿ 14,967.00 | ฿ 12,091.00 | ฿ 12,091.00 | ฿ 21,627.00 | ฿ 21,627.00 | ฿ 14,967.00 | ฿ 16,691.00 | ฿ 13,371.00 | ฿ 16,691.00 | ฿ 16,691.00 | ฿ 12,091.00 | ฿ 42,819.10 | ฿ 25,421.42 | ฿ 41,698.81 | ฿ 37,278.43 |
| Days to Ship | 15 Day(s) | 15 Day(s) | 15 Day(s) | 5 Day(s) | 40 Day(s) | 15 Day(s) | 15 Day(s) | 6 Day(s) | 15 Day(s) | 10 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 15 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 3 Day(s) | Quote | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 12 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) |
| Applicable Tip Shape | - | - | - | C (80° Diamond-Shape) | - | - | - | D (55° Diamond-Shape) | W (Hexagonal Type) | R (Circular) | C (80° Diamond-Shape) | T (Triangle) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | R (Circular) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | - | T (Triangle) | Other | T (Triangle) | R (Circular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | - | S (Rectangular) | S (Rectangular) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | S (Rectangular) | S (Rectangular) | S (Rectangular) | T (Triangle) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | V (35° Diamond-Shaped) | R (Circular) | T (Triangle) | S (Rectangular) | T (Triangle) | T (Triangle) | - | S (Rectangular) | S (Rectangular) | T (Triangle) | R (Circular) | V (35° Diamond-Shaped) | S (Rectangular) | - | R (Circular) | V (35° Diamond-Shaped) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | R (Circular) | R (Circular) | R (Circular) | R (Circular) | R (Circular) | C (80° Diamond-Shape) / V (35° Diamond-Shaped) / R (Circular) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | S (Rectangular) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) |
| Applicable Chip Clearance Angle | - | - | - | Negative | - | - | - | Negative | Negative | Pozidriv | Negative | - | Pozidriv | Negative | Negative | Negative | - | - | - | Pozidriv | Pozidriv | Pozidriv | - | - | Negative | Negative | - | - | Negative | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Pozidriv | Pozidriv | Negative | - | - | - | - | - | Negative | - | - | - | - | - | Pozidriv | Pozidriv | - | - | - | - | - | - | - | Negative | - | - | - | - |
| Selfishly | - | - | - | Right-hand / Left-hand | - | - | - | Right-hand / Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | No-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand | Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Left-hand | No-hand | Right-hand / Left-hand | Right-hand | Right-hand | No-hand | Right-hand / Left-hand | Right-hand | Right-hand | Left-hand | Left-hand | Right-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Left-hand / No-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand | No-hand |
| Application | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / End Face | End Face | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling | Outer Diameter / Profiling / Post-Grinding | End Face | Outer Diameter / End Face / Profiling | Outer Diameter / Profiling | - | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Profiling / Chamfer | End Face | Outer Diameter / End Face / Chamfer | - | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | End Face | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | End Face | Outer Diameter / End Face / Profiling | Outer Diameter / Post-Grinding | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Profiling | Outer Diameter / Post-Grinding | Outer Diameter | - | Outer Diameter / End Face / Profiling | End Face | Outer Diameter / Post-Grinding | Outer Diameter | Outer Diameter | - | End Face | Outer Diameter | Outer Diameter | Outer Diameter / Profiling | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter | Outer Diameter / Profiling / Post-Grinding | Outer Diameter / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Chamfer | Outer Diameter / End Face / Profiling | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Post-Grinding | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face / Chamfer | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face / Chamfer |
| Clamp Shape | - | - | - | Cable clamp | - | - | - | Pin Lock | Double Clamp | Clamp-on | Cable clamp | Clamp-on | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | - | Clamp-on | Clamp-on | Wedge Lock | Clamp-on | Cable clamp | Cable clamp | Cable clamp | - | Clamp-on | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Lever lock | Clamp-on | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clamp-on | Clamp-on | Clamp-on | - | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Pin Lock | - | - | Lever lock | Clamp-on | Lever lock | Lever lock | - | - | - | Clamp-on | Clamp-on | Clamp-on | Clamp-on | Cable clamp | Clamp-on | - | Cable clamp | Cable clamp | Cable clamp | Double Clamp | - | - | Clamp-on | Lever lock |
| Shank height(mm) | - | - | - | 32 | - | - | - | - | - | 32 | 20 ～ 32 | - | 8 | 32 | 32 ～ 40 | 32 ～ 40 | 12 | - | 50 | - | - | 8 | 50 | 16 | 40 | 32 | 32 | 32 | - | - | 31 ～ 31.5 | - | - | 20 | 25 ～ 40 | 25 ～ 32 | 16 | 40 | 10 ～ 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | 40 | - | 20 ～ 25 | - | 32 | - | 9 | 12 | 32 | - | - | - | 32 ～ 40 | - | - | - | - | - | - | - | 0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank width(mm) | - | - | - | 25 | - | - | - | - | 25 | 25 | 20 ～ 32 | - | 8 | 32 | 32 ～ 40 | 25 ～ 40 | 12 | - | 40 | - | - | - | 47 | 16 | 25 | 32 | 36 | 32 | - | - | 18.1 ～ 22.6 | - | - | 20 | 25 ～ 40 | 25 ～ 32 | 16 | 40 | 10 ～ 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 | - | 9 ～ 13 | 25 | 25 | 25 | - | 12 | 25 ～ 32 | 25 | - | - | 25 ～ 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Holding Tools for O.D. Tuning
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?