IMAO CORPORATION Locating, Positioning, Jigs & Fixtures
Positioning and jig parts are auxiliary parts that accurately hold the position of the workpiece and guide the work position of tools, etc. Positioning consists of one that is on the fixed reference side and one that is positioned on the fixed reference side. Even with complicated shapes, accurate positioning is possible with appropriate jigs and restraining methods. There are two types of restraint methods: three-way restraint and two-way restraint. Three-way restraint includes three methods: positioning on a fixed surface, positioning on a hole, and positioning on an adjustment point / plane. The two-way constraint is used when only two directions are required, such as a round shape or a long shape, and positioning is performed on a fixed surface called a shoulder pad or by a V-groove. Types include plungers, index plungers, locating pins and bushes, positioning guide parts, etc. The plunger uses a spring and is used for positioning the die and drill hole.
More
Less
IMAO CORPORATION Locating, Positioning, Jigs & Fixtures
Locating Pins, Bushings
Locating Pins, Bushings
Stop Pins, Stopper Blocks
Stop Pins, Stopper Blocks
Adjusting Screws, Threaded Stopper Blocks
Adjusting Screws, Threaded Stopper Blocks
Locating and Guide Components
Locating and Guide Components
Locating Units
Locating Units
Plungers, Index Plungers
Plungers, Index Plungers
Clamp
Clamp
Workpiece Clamps
Workpiece Clamps
Chat with MISUMI
Chat service is available for any inquiry to MISUMI
Service hours
9:00 - 18:00 (Mon-Sat)
For out of service hours, you can leave a message to us.
We will reply to your inquiries on the next business day.
(except Sundays and public holidays).
Noted for use
Chat service is for Corporate customers and limited for Thai language.
Request for Quotation and Place Order is not available on Chat.