(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- การยกเลิกจำหน่ายสินค้าประเภทอุปกรณ์นิวเมติกส์ (Pneumatic equipment) รุ่น “Economy Series” | Notice of End of Sales for Economy Series Pneumatic Equipment Category > คลิก
Laboratory Materials / Sheets / Packings（Page5）
Laboratory materials/sheets/packing are products used for covering the top of a laboratory table when conducting experiments or research, and for putting an object of experiment on. There is also packing used for covering wires. These products are mostly made of resin, which is chemically stable, and PTFE, fluoropolymer and silicone rubber are commonly used. All these materials have excellent heat resistance, cold resistance, electrical conductivity and thermal conductivity. When moving an object together with the sheet it is placed on, you should also check whether the sheet has friction resistance. Sheets are also used to cover flasks and beakers to block the light or to seal them. They are also used to wrap and discard unneeded materials after an experiment, so be sure to choose a product with acid and alkali resistance. While sheets can easily be cut to any desired size, products with perforated lines can be cut without using scissors.
Configure
Specification/Dimensions
-
Product Type
-
Material
- Silicon
- Fluororesin
- Synthetic Rubber
- Impregnated Glass Fluorine Resin
- PE (polyethylene)
- PET
- Vinyl Chloride
- Bakelite
- Acrylic
- Aluminum
- Stainless Steel
- Neodymium Magnet
- Other
- Copper
- ABS Resin
- PA (MC Nylon®)
- PC (Polycarbonate)
- POM (Polyacetal)
- PP (Polypropylene)
- Silicon Rubber
- Nitrile Rubber
- Antibacterial PP (Polypropylene)
- Quartz glass
- Foam Urethane
- Tempax®
- Urethane
-
Width(mm)
-
Length(mm)
-
Thickness(mm)
-
Other
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 7,445 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· It is a mirror with aluminum deposition on the flat substrate polished with high precision.
· High reflectance can be achieved in various incidence angles.
· A product that uses a protective coating of dielectric multilayer film designed to increase the reflectance of visible light and ultraviolet light.
· Although the reflectance is slightly lower, stable reflectance can be obtained with visible light or infrared light.
· Pyrex® is a registered trademark of Corning Inc.
· * Loss of a large amount of light may occur due to aluminum film absorption when transmitting light with multiple mirrors.
· * Use a dielectric multi-layer film mirror (TFM, etc.).
· * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
· * Reflectance may vary according to the polarization of the incident beam.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Coating: Al + Dielectric Multilayer
· Parallelism: < 3'
· Incidence Angle: 45°
· Laser Yield Strength: 0.25 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Scratch-Dig: 40-20
· Effective Range: 90% of External Diameter
· [Individual Specifications]
· Compatible Wavelength: 170 to 400 nm
· Reflectivity: > 85% on Average
· Outer diameter φD: φ12.7 mm
· Thickness t: 5 mm
· Material: BK7
· Substrate Surface Accuracy: λ/10
· Rear Surface: Sanded SurfaceFrom: ฿ 5,815.00 Days to Ship: 
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
TFA-20S05-4 Aluminum Plane Mirror
AS ONE
[Features]
· It is a mirror with aluminum deposition on the flat substrate polished with high precision.
· High reflectance can be achieved in various incidence angles.
· There are ones with only aluminum film coating (TFAN/TFAQN) as well as ones with aluminum film with protective coating (TFA/TFAQ) to prevent scratches.
· Can be used as a mirror for visible light and near infrared light.
· Low expansion, high rigidity, high surface accuracy mirror (TFAQ/TFAQN) using synthetic quartz substrate is also available.
· Pyrex® is a registered trademark of Corning Inc.
· * Aluminum mirrors without protective coating (TFAN/TFAQN) are easily damaged, and film will become oxidized.
· * Never rub the mirror surface with paper or cloth.
· * For long-term storage, use a de-oxidizer to prevent the oxidation of aluminum.
· * Loss of a large amount of light may occur due to aluminum film absorption when transmitting light with multiple mirrors.
· * Use a dielectric multi-layer film mirror (TFM, etc.).
· * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
· * Reflectance may vary according to the polarization of the incident beam.
[Product Specifications]
· [Common Specifications]
· Material: BK7, Synthetic Quartz, Hard Glass (Pyrex®, etc.)
· Coating: Al+MgF 2 (Surface accuracy λ/20 is Al+SiO)
· Parallelism: < 3'
· Incidence Angle: 45°
· Laser Yield Strength: 0.25 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Scratch-Dig: 40-20
· Effective range: Circle inscribed in the square that makes up 90% of the external diameter
· [Individual Specifications]
· Coating: Al+MgF2
· Length A: □20 mm
· Thickness t: 5 mm
· Material: BK7
· Substrate Surface Accuracy: λ/4
· Rear Surface: Sanded SurfaceFrom: ฿ 2,705.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· It is a plate type half mirror that can be used in wide ultraviolet, visible, and infrared wavelength bands.
· It can be used for multi-wavelength lasers and transmission/reflection branching of white light sources.
· Ultra-wide band half mirrors can also be used as the element for spectroscopic measurements.
· The ultra-broadband type (PMH) has a wide band which can cover ultraviolet and infrared rays, and the lineup presents 4 types of half mirrors whose band wavelengths are changed.
· 3 types of half mirrors for wide band use (PSMH) are available; for visible, near infrared, and communication infrared rays.
· Because a dielectric multilayer is used, there is almost no light loss caused by film absorbency, so it branches light effectively.
· Because its polarization properties are low, light can be branched even when using a laser light source or a linearly polarized light source.
· As it is a plate type, it is possible to minimize wavelength dispersion and chromatic aberration induced when transmitting through the substrate and also reduce the weight.
· There are 2 types: a parallel plane type in which the beam does not refract and a wedge type with little influence from ghosting or interference from back side reflections.
· Wedge type has an arrow mark pointing towards front surface at the thickest part.
· * When linearly polarized light such as laser light is used, reflectance and transmittance change depending on the polarization direction.
· * When adjusting the branching ratio precisely to 1:1, ensure the direction of polarization is set to 45 degrees or use circular polarization of light.
· * Optical path of the transmitted light may be shifted a few millimeters parallel from the incident light, depending on the refractive index and thickness of the substrate. (A beam amplitude of approximately 30 minutes is added to parallel displacement of the optical path for the wedge type)
· * Transmittance wavelength characteristics will change when used with an incident angle other than 45°.
· * If you have difficulty distinguishing the reflective coating surface, check the arrow on the side of the substrate.
· * Phase differences of incident light are not preserved in reflected light and transmitted light.
· * Use a wave plate for phase difference compensation.
[Product Specifications]
· [Common Specifications]
· Material: BK7 Synthetic Quartz
· Substrate Surface Accuracy: λ/10
· Coating: Front Surface Dielectric Multilayer Film, Rear Surface Anti-Reflective Film
· Incidence Angle: 45°
· Branching Ratio (Reflection: Transparency): 1:1
· Scratch-Dig: 10-5
· Effective Diameter: 90% of External Diameter
· [Individual Specifications]
· Compatible Wavelength: 400 to 2,000 nm
· Outer diameter φD: φ25.4 mm
· Thickness t: 3 mm
· Material: BK7
· Parallelism: < 5″
· Transmittance (Average Value of P and S Polarized Light): Average Value 50 ±10%
· Laser Yield Strength*: 0.5 J/cm2
· * Laser Pulse Width 10 ns, Repetition Frequency 20 HzFrom: ฿ 41,752.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· Non-polarized type half mirror that can be used over a wide spectrum of visible light or infrared light.
· It can be used for multi-wavelength lasers and polarization experiments with visible light.
· A hybrid film that combines a dielectric multilayer with a metallic film, it is both unpolarized and has a wide band.
· Cube type, so if the beam is input vertically, the optical axis of the output light will not move in parallel.
· Also, even if a beam that is the same size as the effective diameter is incident, the transmitted light and reflected light will not be lost or reduced.
· Even if the polarization direction of linearly polarized light changes, the branching ratio of reflection and transmission (1:1) does not change.
· * Irradiate from the prism side marked with a ○.
· * If light enters from the prism of the opposite side, reflectance and reflectance wavelength characteristics will vary.
· * Hybrid film is somewhat absorbent (10% to 15%) due to the metal film.
· * Therefore, even the total of transmitted light and reflected light does not equal 100%.
· * Phase differences of incident light are not preserved in reflected light and transmitted light.
· * Use a wave plate for phase difference compensation.
· * Due to the impact of the refractive index of the material and thickness of the glass, wavelength dispersion occurs for transmitted light and reflected light.
· * Also, chromatic aberration and spherical aberration may occur when convergent beam or divergent beam is incident.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Base Material Surface Accuracy: λ/4
· Transmitted Beam Deflection Angle: < 5'
· Coating: Inclined Surface Hybrid Film of Combined Dielectric Multilayer and Metal Film, 4 Sides Anti-Reflective Film
· Incidence Angle: 0°
· Branching Ratio (Reflection: Transparency): 1:1
· Laser Yield Strength: 0.3 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Scratch-Dig: 40-20
· Effective range: Circle inscribed in the square that makes up 85% of the external diameter
· [Individual Specifications]
· Compatible Wavelength: 1,300 to 1,550 nm
· A=B=C: 10 mm
· Transmittance: 45 ±10% (1,400 nm)
· Difference in Transmittance of P and S Polarization |Tp - Ts|: < 10%From: ฿ 15,415.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· A cube type half mirror where unpolarized light such as white light and LED light sources splits equally into transmitted light and reflected light.
· Achieves accurate branching characteristics in a wide wavelength band in white light and LED light sources.
· Dielectric multilayer film is used for the coating, so loss of light intensity is minimal, allowing effective light separation.
· Cube type, so if the beam is input vertically, the optical axis of the output light will not move in parallel.
· Also, even if a beam that is the same size as the effective diameter is incident, the transmitted light and reflected light will not be lost or reduced. * Irradiate from the prism side marked with a ○.
· * If light enters from the prism of the opposite side, reflectance and reflectance wavelength characteristics may vary.
· * When linearly polarized light such as laser light is used, reflectance and transmittance change greatly depending on the polarization direction.
· * When adjusting the branching ratio to 1:1, ensure the direction of polarization is set to 45 degrees or use circular polarization of light.
· * Phase differences of incident light are not preserved in reflected light and transmitted light.
· * Use a wave plate for phase difference compensation.
· * Due to the impact of the refractive index of the material and thickness of the glass, wavelength dispersion occurs for transmitted light and reflected light.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Base Material Surface Accuracy: λ/4
· Transmitted Beam Deflection Angle: < 5'
· Coating: Inclined Surface Dielectric Multilayer Film, 4 Sides Anti-Reflective Film
· Incidence Angle: 0°
· Branching Ratio (Reflection: Transparency): 1:1
· Polarization conditions of incident light: Unpolarized light, linearly polarized light at 45° azimuth or circularly polarized light
· Laser Yield Strength: 0.3 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Scratch-Dig: 20-10
· Effective range: Circle inscribed in the square that makes up 85% of the external diameter (A = B = C ≤ 7 mm: Circle inscribed in the square that makes up 80% of the external diameter)
· [Individual Specifications]
· Compatible Wavelength: 400 to 700 nm
· A=B=C: 40 mm
· Transmittance (Average Value of P and S Polarized Light): Average Value 50 ±5%From: ฿ 37,898.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
SLB-12.7-20PM Spherical Planoconvex Lens
AS ONE
[Features]
· With a simple shape, this is a lens for use in laser experiments with somewhat reduced spherical aberration.
· Can be used for condensing laser light in detectors, conducting imaging experiments with monochromatic light sources, etc..
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· Achromatic lens (DLB) subjected to chromatic aberration correction is also available.
· * Spherical surface planoconvex lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * The planoconvex lens has an orientation for light incidence.
· * Be sure to have parallel light incident from the convex surface.
· * When reversed, spherical aberration may increase and the condensing spot may widen or images may be out of focus.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Anti-reflective Film (400-700 nm)
· Transmittance: > Average 99%
· Laser Yield Strength (Reference Value): Anti-reflection Coating 4 J/cm^2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Effective diameter: 85% of the outer diameter for D ≥ φ10 mm, and 83% of the outer diameter for D < φ10 mm
· Scratch-Dig: 20-10 φ10 mm ≤ D, 40-20 D < φ10 mm
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: 400-700 nm
· Outer diameter φD: φ12.7 mm
· Focal distance f: 20 mm
· Rim thickness te: 2 mm
· Central thickness tc: 4.2 mm
· Back focus fb: 17.2 mm
· Radius of the curvature r: 10.38 mm
· Eccentricity: < 1'From: ฿ 2,973.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
SLSQ-30-4000P Spherical Planoconvex Lens
AS ONE
[Features]
· With a simple shape, this is a lens for use in laser experiments with somewhat reduced spherical aberration.
· Can be used for condensing laser light in detectors, conducting imaging experiments with monochromatic light sources, etc..
· A synthetic quartz lens with high laser yield strength that can also be used for ultraviolet radiation of 350 nm or less.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· Achromatic lens (DLB) subjected to chromatic aberration correction is also available.
· * Spherical surface planoconvex lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * The planoconvex lens has an orientation for light incidence.
· * Be sure to have parallel light incident from the convex surface.
· * When reversed, spherical aberration may increase and the condensing spot may widen or images may be out of focus.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: Synthetic Quartz
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.460
· Coating: Non-Coated
· Effective Diameter: 90% of External Diameter
· Scratch-Dig: 20-10
· [Individual Specifications]
· Outer diameter φD: φ30 mm
· Focal distance f: 4000 mm
· Rim thickness te: 2 mm
· Central thickness tc: 2.1 mm
· Back focus fb: 3998.6 mm
· Radius of the curvature r: 1840 mm
· Eccentricity: < 3'From: ฿ 7,267.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
SLB-12.7-30NIR1 Planoconcave Lens
AS ONE
[Features]
· The simple shape expands the collimated laser light.
· It can be used in cases where the irradiation area of the illuminating light is expanded by enlarging the beam diameter in combination with a convex lens.
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· * A concave lens itself cannot concentrate light or form an actual image.
· * Use in combination with a convex lens.
· * Spherical surface planoconcave lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * The planoconcave lens has an orientation for light incidence.
· * Have parallel light incident from the concave surface.
· * When reversed, spherical aberration may increase and optical performance of the optical system may worsen.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Anti-reflective Film (633-1,064 nm)
· Transmittance: > Average 98.5%
· Laser Yield Strength (Reference Value): Anti-reflection Coating 4 J/cm^2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Effective Diameter: 85% of External Diameter
· Scratch-Dig: 20-10
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: 633-1,064 nm
· Outer diameter φD: φ12.7 mm
· Focal distance f: -30 mm
· Rim thickness te: 3.4 mm
· Central thickness tc: 2 mm
· Back focus fb: -31.3 mm
· Radius of the curvature r: 15.57 mm
· Eccentricity: < 1'From: ฿ 3,483.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· With both faces convex, this lens can efficiently refract light in a restricted space, and collect large quantities of light.
· It is used to collect collimated light at as short a distance as possible or to gather as much light radiated from a light emitting point as possible.
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· Achromatic lens (DLB) subjected to chromatic aberration correction is also available.
· * Spherical surface biconvex lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * Biconvex lenses have larger spherical aberration than planoconvex lenses, and as such the focal spots may not converge into one point.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Anti-reflective Film (750-1,550 nm)
· Transmittance: > Average 98.5%
· Laser Yield Strength (Reference Value): Anti-reflection Coating 4 J/cm^2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Effective diameter: 85% of the outer diameter for D ≥ φ10 mm, and 83% of the outer diameter for D < φ10 mm
· Scratch-Dig: 20-10 φ10 mm ≤ D, 40-20 D < φ10 mm
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: 750-1,550 nm
· Outer diameter φD: φ12.7 mm
· Focal distance f: 20.7 mm
· Rim thickness te: 2 mm
· Central thickness tc: 4.0 mm
· Back focus fb: 19.3 mm
· Radius of the curvature r: 20.76 mm
· Eccentricity: < 1'From: ฿ 3,550.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
SLB-10B-30NM Spherical Biconcave Lens
AS ONE
[Features]
· With both faces concave, this lens can efficiently refract light in a restricted space, and spread the light widely.
· It can be used in cases where the irradiation area of the illuminating light is expanded.
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· * A concave lens itself cannot concentrate light or form an actual image.
· * Use in combination with a convex lens.
· * Spherical surface biconcave lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * If a high-energy pulse laser is used, a focal point may be created on the optical path due to reflected light from the concave surface and sparking may occur.
· * Use a planoconcave lens when using a pulse laser.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Anti-reflective Film (400-700 nm)
· Transmittance: > Average 99%
· Laser Yield Strength (Reference Value): Anti-reflection Coating 4 J/cm^2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Effective Diameter: 85% of External Diameter
· Scratch-Dig: 20-10
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: 400-700 nm
· Outer diameter φD: φ10 mm
· Focal distance f: -29.7 mm
· Rim thickness te: 2.8 mm
· Central thickness tc: 2 mm
· Back focus fb: -30.3 mm
· Radius of the curvature r: 31.14 mm
· Eccentricity: < 1'From: ฿ 4,565.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· With both faces concave, this lens can efficiently refract light in a restricted space, and spread the light widely.
· It can be used in cases where the irradiation area of the illuminating light is expanded.
· A synthetic quartz lens that can also be used for ultraviolet radiation of 350 nm or less.
· Selection can be made from a wide range of variations subdivided by outer diameter, focal distance, and so on, to suit the specifications.
· * A concave lens itself cannot concentrate light or form an actual image.
· * Use in combination with a convex lens.
· * Spherical surface biconcave lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * If a high-energy pulse laser is used, a focal point may be created on the optical path due to reflected light from the concave surface and sparking may occur.
· * Use a planoconcave lens when using a pulse laser.
[Product Specifications]
· [Common Specifications]
· Material: Synthetic Quartz
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.460
· Coating: Non-Coated
· Effective Diameter: 90% of External Diameter
· Scratch-Dig: 20-10
· [Individual Specifications]
· Outer diameter φD: φ50.8 mm
· Focal distance f: -79.5 mm
· Rim thickness te: 12 mm
· Central thickness tc: 3 mm
· Back focus fb: -80.5 mm
· Radius of the curvature r: 73.6 mm
· Eccentricity: < 1'From: ฿ 19,405.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024CLB-3030-100PM Planoconvex Lens
AS ONE
[Features]
· The cylindrical plano-convex lens has a curvature in the vertical direction and no curvature in the horizontal direction.
· Can be used for experiments in which laser light is condensed into a narrow line or for creating wide sheet light used for flow measurements.
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Using a cylindrical lens in the optical system, the beam shape and the aspect ratio of the illumination light can be changed.
· A cylindrical lens holder (CHA) for fixing the cylindrical lens is also available.
· * Cylindrical planoconvex lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * Cylindrical planoconvex lenses have a particular orientation for receiving the light.
· * Be sure to have parallel light incident from the convex surface.
· * When reversed, spherical aberration may increase and condensing lines may thicken.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Anti-reflective Film (400-700 nm)
· Transmittance: > Average 99%
· Laser Yield Strength (Reference Value): Anti-reflection Coating 4 J/cm^2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Effective diameter: Circle or ellipse inscribed in a rectangle with dimensions of 90% relative to the external dimensions
· Scratch-Dig: 20-10
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: 400-700 nm
· A X B: 30 X 30 mm
· Focal distance f: 100 mm
· Rim thickness te: 2.8 mm
· Central thickness tc: 5 mm
· Back focus fb: 96.7 mm
· Radius of the curvature r: 51.9 mmFrom: ฿ 12,542.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024CLSQ-1525-40P Planoconvex Lens
AS ONE
[Features]
· The cylindrical plano-convex lens has a curvature in the vertical direction and no curvature in the horizontal direction.
· Can be used for experiments in which laser light is condensed into a narrow line or for creating wide sheet light used for flow measurements.
· A synthetic quartz lens with high laser yield strength that can also be used for ultraviolet radiation of 350 nm or less.
· Using a cylindrical lens in the optical system, the beam shape and the aspect ratio of the illumination light can be changed.
· A cylindrical lens holder (CHA) for fixing the cylindrical lens is also available.
· * Cylindrical planoconvex lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * Cylindrical planoconvex lenses have a particular orientation for receiving the light.
· * Be sure to have parallel light incident from the convex surface.
· * When reversed, spherical aberration may increase and condensing lines may thicken.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: Synthetic Quartz
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.460
· Coating: Non-Coated
· Effective diameter: Circle or ellipse inscribed in a rectangle with dimensions of 90% relative to the external dimensions
· Scratch-Dig: 20-10
· [Individual Specifications]
· A X B: 15 X 25 mm
· Focal distance f: 40 mm
· Rim thickness te: 2.4 mm
· Central thickness tc: 4 mm
· Back focus fb: 37.3 mm
· Radius of the curvature r: 18.4 mmFrom: ฿ 17,343.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
CLB-1020-15N Cylindrical Planoconcave Lens
AS ONE
[Features]
· The cylindrical plano-concave lens has a curvature in the vertical direction and no curvature in the horizontal direction.
· It is used in combination with a cylindrical planoconvex lens to shape the elliptical beam of a semiconductor laser into a circular beam, etc.
· A BK7 lens for the visible range to the near infrared range.
· Three types of lenses with antireflection coating in the visible range, near-infrared range, and infrared range are available.
· Using a cylindrical lens in the optical system, the beam shape and the aspect ratio of the illumination light can be changed.
· A cylindrical lens holder (CHA) for fixing the cylindrical lens is also available.
· * Cylindrical planoconcave lenses have chromatic aberration, resulting in focal lengths changing with wavelength.
· * Cylindrical planoconcave lenses have a particular orientation for receiving the light.
· * Be sure to have parallel light incident from the concave surface.
· * When reversed, spherical aberration may increase and optical performance may worsen.
· * Non-coated products have loss due to reflections at the front and rear surfaces, with a transmittance of about 90%.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Refractive Index: n e = 1.519
· Coating: Non-Coated
· Effective diameter: Circle or ellipse inscribed in a rectangle with dimensions of 90% relative to the external dimensions
· Scratch-Dig: 20-10
· [Individual Specifications]
· Antireflection Film Coating Wavelength Region: Not Coated
· A X B: 10 X 20 mm
· Focal distance f: -15 mm
· Rim thickness te: 4 mm
· Central thickness tc: 2.2 mm
· Back focus fb: -16.4 mm
· Radius of the curvature r: 7.79 mmFrom: ฿ 9,905.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· The aspherical condenser lens for illumination can irradiate light for illumination with a large divergence angle (converging angle).
· Used in illumination systems for high-power microscopes, and in optical systems which efficiently collect light from divergent light sources.
· By making one side non-spherical, a large angle of divergence (angle of convergence) of the order of NA0.5 has been achieved using a single lens.
· From items with small, compact apertures to large aperture lenses with a long back focus, every kind of outer diameter size has been made available.
· It can be used in a wide range from the visible region to the 2 μm infrared region.
· B270® is a registered trademark of SCHOTT AG.
· * Having parallel light incident from the back (flat) side causes the spherical aberration to increase, so that light cannot be condensed into a single point.
· * Aspheric condenser lenses are single lens types, resulting in focal lengths changing with wavelength.
· * The aspheric condenser lens is for illumination light sources.
· * This is not an aplanatic lens for laser condensing.
· * The lens does not have an antireflection coating and thus has loss due to reflections at the front and rear surfaces, providing a transmittance of 90% or less.
· * As this is a pressed product, it may have dents or chippings caused by shrinking outside the effective range.
[Product Specifications]
· [Common Specifications]
· Material: B270® (n d=1.523)
· Shape: Front face is aspherical, rear face is planar or spherical
· Coating: Non-Coated
· Maximum operating temperature: 170°C
· Scratch-Dig: 80-50
· Effective Diameter: 80% of External Diameter
· [Individual Specifications]
· Outer diameter φD: φ50 mm
· Focal distance f*2: 39 mm
· Back focus fb*2: 25.5 mm
· NA *1 (D/2 X 0.8/f) : 0.51
· Rim thickness te: 2.8 mm
· Central thickness tc*2: 20.5 mm
· Reverse Face: Plane surface
· * 1 NA is calculated with 80% of the outer diameter of the lens.
· *2 These are pressed products, so individual units may vary. Be sure to allow sufficient margin for use.From: ฿ 2,705.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· An air gap type achromatic condensing lens that does not use adhesive on the lens.
· Used as the condensing lens in a 532 nm, high-output laser processing machine equipped with coaxial epi-illumination observation.
· Through the optimized lens design, the chromatic aberration has been corrected over a wide wavelength range centered at 532 nm.
· For lenses with a focal length of 60 mm or more, laser collimated light can be narrowed down to the diffraction limit spot diameter.
· Because the lens has received anti-reflection coating, there is little light amount loss due to reflection, enabling light beams to be effectively condensed.
· Separately sold protective glass can be attached to protect the objective lens from spray from laser processing.
· Dedicated lens holder (LHF-M34-30) is available for fixing condenser lenses.
· * Use condensing lenses when imaging an object with infinite distance as the focus or changing the positional light source to parallel light.
· * Sufficient optical performance cannot be obtained when used for imaging at a close distance, etc.
· * The condensing lens has an orientation for light incidence.
· * Be sure to have parallel light incident from the top (with the engraved stamp on the lens barrel upright).
· * When reversed, chromatic or spherical aberration may increase and the condensing spot may widen or images may be out of focus.
· * When used outside the specified wavelength range, aberration may increase and transmittance may worsen.
· * The condensing lens may become very hot and the condensing lens focal distance may vary if a high-power laser is used or the product is used near a light source generating heat.
· * Heat dissipation measures are required if irradiating for long periods.
· * If a smaller spotting diameter is desired, widen the incident beam diameter (1/e^2) to approximately half of the effective diameter of the condensing lens.
[Product Specifications]
· [Common Specifications]
· Material: Crown Glass (air gap) Flint Glass
· Frame: Aluminum; Surface Processing: Black Alumite
· Design Wavelength: 486 nm, 532 nm, 656 nm
· Coating: Visible Region Anti-reflective Film
· Permissible Incidence Angle: ±1°
· Laser Yield Strength: 1 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· [Individual Specifications]
· Focal distance f: 150 mm
· Length L: 12 mm
· NA : 0.09
· WD: 141.9 mmFrom: ฿ 43,948.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· An air gap type achromatic condensing lens that does not use adhesive on the lens.
· Used as the condensing lens in a 532 nm, high-output laser processing machine equipped with coaxial epi-illumination observation.
· Through the optimized lens design, the chromatic aberration has been corrected over a wide wavelength range centered at 532 nm.
· For lenses with a focal length of 60 mm or more, laser collimated light can be narrowed down to the diffraction limit spot diameter.
· Because the lens has received anti-reflection coating, there is little light amount loss due to reflection, enabling light beams to be effectively condensed.
· Separately sold protective glass can be attached to protect the objective lens from spray from laser processing.
· Dedicated lens holder (LHF-M34-30) is available for fixing condenser lenses.
· * Use condensing lenses when imaging an object with infinite distance as the focus or changing the positional light source to parallel light.
· * Sufficient optical performance cannot be obtained when used for imaging at a close distance, etc.
· * The condensing lens has an orientation for light incidence.
· * Be sure to have parallel light incident from the top (with the engraved stamp on the lens barrel upright).
· * When reversed, chromatic or spherical aberration may increase and the condensing spot may widen or images may be out of focus.
· * When used outside the specified wavelength range, aberration may increase and transmittance may worsen.
· * The condensing lens may become very hot and the condensing lens focal distance may vary if a high-power laser is used or the product is used near a light source generating heat.
· * Heat dissipation measures are required if irradiating for long periods.
· * If a smaller spotting diameter is desired, widen the incident beam diameter (1/e^2) to approximately half of the effective diameter of the condensing lens.
[Product Specifications]
· [Common Specifications]
· Material: Crown Glass (air gap) Flint Glass
· Frame: Aluminum; Surface Processing: Black Alumite
· Design Wavelength: 1,064 nm, 632.8 nm
· Coating: Anti-reflective Film for 1,064 nm, 632.8 nm
· Permissible Incidence Angle: ±1°
· Laser Yield Strength: 1 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· [Individual Specifications]
· Lens O.D. φD: φ30 mm
· Focal distance f: 50 mm
· Outer diameter φDc: φ36 mm
· Effective Diameter φDe: φ25.5 mm
· Length L: 19 mm
· Fixing Screw Ma: M34, P0.75
· Mounting Screw Mb: M28 P0.75
· Screw Length A: 3.5 mm
· NA : 0.25
· WD: 41.4 mmFrom: ฿ 64,233.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
PG-27 Protective Glass for YTL/YDL【10 Pieces Per Package】
AS ONE
[Features]
· Protective glass is attached to the condenser lens as a protection from splashes in laser processing.
· Three different sizes of protective glass are available.
· Protective Glass Holder (PGH)
· Visible Achromatic Condensing Lens
· YAG laser condensing lens
· Condensing Lens for Fiber Laser
· Part of the Ultraviolet Condensing Lens
· Since the protective glass has not been coated, the transmittance is on the order of approximately 90% due to the surface reflection loss.
· Replace with a new one if the protective glass gets dirty or the transmittance has decreased.
· (Consumable)
[Product Specifications]
· [Common Specifications]
· Material: Super White Glass or BK7
· [Individual Specifications]
· Outer diameter φD: φ27 mm
· Supported Protective Glass Holder: PHG-30From: ฿ 2,705.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· A beam expander that can expand the laser beam in simple experiments.
· Collimating adjustment has been performed to achieve the optimal collimated state when the collimated beam is incident, allowing the collimated light to be easily magnified simply by directly emitting the laser beam.
· The optical system of the beam expander has an air gap structure that does not bond lenses.
· This makes it possible to also use high-output lasers.
· By using the Galilean type lens composition, the number of aberration correction lenses has been reduced and the total length of the beam expander has been shortened.
· The visible light type can be attached directly to the exit port of the He-Ne laser (05-LHP-111/121/151/171/991/925).
· A beam expander holder (LBE-H) is available, where a beam expander is inserted in a holder which has been equipped with minute tilt adjustment.
· * When a beam expander is placed inclined to the optical axis, beams emitted from the beam expander will be inclined from the optical axis.
· * Arrange with light vertically incident on the beam expander, or adjust the angle of the beam expander with a tiltable holder.
· * Beam expanders cannot be used in the reverse direction to function as beam diameter condensers for creating collimated light.
· * Calculate the divergence angle of the laser beam and the position of the beam waist, and use an appropriate optical system accordingly.
· * The output beam may not collimate if the incident beam is divergent or convergent light.
[Product Specifications]
· Compatible Wavelength: 780 to 830 nm
· Beam magnification: 3x
· Barrel Length A: 63.3 mm
· B: 57.3 mm
· Incidence Effective Diameter: φ3.8 mm
· Laser Yield Strength* : 4 J/cm2
· Mass: 0.12 kg
· * Laser Pulse Width 10 ns, Repetition Frequency 20 HzFrom: ฿ 33,807.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
TCA-30C05-10000 Concave Mirror
AS ONE
[Features]
· A concave substrate that allows evaporated film coating of various total-reflection mirrors.
· A concave mirror coated in advance with aluminum is also available.
· It can be used as the main mirror in reflecting telescopes, the reflecting mirror in the collimating optical systems of lamp light sources, etc.
· Selection can be made from a wide range of variations subdivided by external dimensions, radius of curvature, and so on, to suit the specifications.
· Machined with high surface accuracy compared with a plano-concave lens (SLB-N).
· Laser concave mirror substrates (LCBS) with high surface accuracy for use with laser resonator mirrors are also available.
· * The back side is a sanded surface and thus cannot be used for transmission.
· * Use a concave lens (SLB-N) when using for transmittance.
· * For use as a cold mirror or partial reflection mirror, the use of a concave substrate with mirrored back is required.
· * With the incidence of a high-energy pulse laser beam, sparking will be generated near the focal point and the wavefront will be disturbed.
· * The outer ridgeline of the concave surface is chamfered and edge thickness (te) may vary. Therefore, be sure to use the back side as the reference plane.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Spherical Surface Accuracy: λ/2
· Error in Radius of Curvature: ±2%
· Coating: Mirror with Protective Film, MgF2 + Al
· Effective Range: 85% of External Diameter
· Scratch-Dig: 40-20
· Rear Surface: Sanded Surface
· [Individual Specifications]
· Coating: Al+MgF2
· Outer diameter φD: φ30 mm
· Rim thickness te: 5 mm
· Central thickness tc: 5 mm
· Radius of the curvature r: 10000 mm
· Focal distance f: 5000 mmFrom: ฿ 7,777.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· By optimizing the material and thickness of the substrate and the coating conditions, a mirror with high surface accuracy has been realized.
· Guarantees surface accuracy of λ/10 after coating.
· A higher surface accuracy (after coating) than the conventional multilayered dielectric flat mirror (TFM) is provided.
· By using synthetic quartz for the substrate and making the substrate thicker, the rigidity of the substrate has been increased.
· A line-up of high-reflectivity mirrors is provided to support the individual wavelengths of ultraviolet lasers and YAG lasers.
· HTFM-MHG, which features a mirror adhered to the holder and guaranteed surface accuracy, is also available.
· * Reflection wavelength characteristics may vary depending on the polarization state of incident beams for dielectric multi-layer film.
· * P polarization has lower reflectance and a narrower reflection band than S polarization.
· * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
· * Reflectance may decrease when used with an incident angle other than 45°.
· * When used at incompatible wavelengths, the reflectance may decrease.
· * No surface accuracy guarantee data is included with this product.
[Product Specifications]
· [Common Specifications]
· Material: Synthetic Quartz
· Coating: Dielectric Multilayer Film
· Incidence Angle: 45° ±3°
· Post-Coating Surface Accuracy: λ/10
· Parallelism: < 3'
· Scratch-Dig: 10-5
· Effective Diameter: 80% of External Diameter
· Rear Surface: Polished Surface
· [Individual Specifications]
· Compatible Wavelength: 355 nm
· Outer diameter φD: φ50.8 mm
· Thickness t: 11 mm
· Reflectance: >99.5%
· Laser Yield Strength*: 5 J/cm2
· * Laser Pulse Width 10 ns, Repetition Frequency 20 HzFrom: ฿ 41,987.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· A cylindrical lens with polished sides.
· Can be used for finely condensing laser light, creating sheet-shaped beams, or for applications in which narrow and long lines are irradiated over long distances.
· The rod diameter has been decreased to allow use as a lens with focal length shorter than the cylindrical lens.
· As it has been processed and polished precisely, a straight line without distortion or bend can be obtained with long-distance projection.
· Can also be used by placing directly in front of the line laser for applications in which large amounts of light are taken in by sensors.
· Use a small lens holder (MLH-10) or Selfoc Lens® holder (MLH-SF) for fixing rod lenses.
· * The end surface has not been polished.
· * Have light incident from the side.
· * Large spherical aberration occurs as the curvature of the rod lens is small.
· * Use a cylindrical lens (CLB/CLSQ) for precision optical systems.
· * Depending on the direction, divergent light may strike the operator in the eye when diverging laser light with a rod lens.
· * Check laser power and take safety measures such as using protective glasses when using the product.
· * Take care to avoid cutting your fingers and hands as both end faces of the rod are not chamfered.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Design Wavelength: 546.1 nm
· Polishing: Polished side face
· Coating: Non-Coated
· Scratch-Dig: 40-20
· [Individual Specifications]
· Outer diameter φD: φ5 mm
· Length L: 10 mm
· Focal distance f: 3.7 mm
· Back focus fb: 1.2 mmFrom: ฿ 3,212.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· Fly's-eye lenses are used to create lighting with uniform brightness, such as for projectors or semiconductor manufacturing devices.
· By using two opposing fly's-eye lenses, illumination of the rectangular intensity distribution is possible even for light sources with strong diffusibility such as lamps.
· Two types are available, a 7x9 split type with a focal distance of 42.07 mm and a 10x13 split type with a focal distance of 38.24 mm.
· With an antireflection film coating, the incident light can be used as illumination light with almost no loss in light quantity.
· By using glass lens press molding technology, both high performance and low price have been achieved.
· * Imaging lens is not included in the specifications
[Product Specifications]
· [
· Material: B270® equivalent (B270® is a registered trade mark of SCHOTT AG)
· Coating: Anti-reflective Film Coat (Dielectric Multilayer Film)
· Operating Wavelength: 400-700 nm
· Incidence Angle: 0° (coating specification)
· Focal Length Tolerance: ±3%
· Tolerance of Optical Axis Center: ±1.5 mm
· [Individual Specifications]
· Focal distance : 38.24 mm
· Radius of the curvature: 22.0 mmFrom: ฿ 6,762.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
[Features]
· With a single concave lens made by adhering two cylindrical surface lenses of different wavelength dispersing refractive indices, a narrow line near the theoretical limit can be produced.
· Cylindrical plano-convex lens (CLB-P) is recommended when color bleeding or line blurring is a problem.
· Designed to reduce focus deviation in the entire visible light range.
· Since the direction of the condensing line is parallel to the side (B) of the outer diameter, optical adjustment is easy.
· It can be a substitute for the slit in spectrometers and such.
· A cylindrical lens holder (CHA) for fixing achromatic cylinder lenses is available.
· * Achromatic cylinder lenses are oriented for incidence of parallel light.
· * Have parallel light incident from the surface with the smaller radius of curvature (the surface indicated by the arrow).
· * Having parallel light incident from the opposite side thickens the condensing line.
· * In the generating line direction (B direction), there are no achromatic lens effects, aberration reducing characteristics, or light condensing abilities.
· * When linear light enters the achromatic cylinder lens, it will not be parallel light.
· * Diverges in the generating line direction (B direction).
· * High quality parallel light incident to the lens is necessary to condense light to a narrow ray.
[Product Specifications]
· [Common Specifications]
· Material: N-SF5/BK7
· Design Wavelength: Blue: 486.1 nm, Green: 546.1 nm, Red: 656.3 nm
· Coating: Anti-reflective Film
· Adhesive: UV Curable Adhesive
· Laser Yield Strength: 0.3 J/cm2 (Pulse Width 10 ns, Repetition Frequency 20 Hz)
· Scratch-Dig: 60-40
· Effective diameter: Circle inscribed in the square that makes up 90% of the external dimensions
· [Individual Specifications]
· A X B: 15 X 15 mm
· Focal distance f: 100 mm
· Rim thickness te: 4.3 mm
· Central thickness tc: 5 mm
· Back focus fbFrom: ฿ 29,073.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· The beam that passes through one of the two elliptical focal points is reflected off the elliptical surface and passes through the other focal point.
· Using this principle, a light source can be placed at one focal point to collect light at the other focal point.
· Used for lamp light entering the optical fiber or light guide.
· High focusing performance is achieved by precise aspherical processing.
· Because the aluminum coating has a damage resistant protective coat, it can be used for long periods with stability.
· Mirrors can be selected from a wide range of variations categorized by outer diameter, focal position, and so on, to suit the specifications.
· TEMPAX® is a registered trademark of SCHOTT AG.
· A parabolic mirror (TPCA) that projects the light of the first focus in infinite distance is also available.
· * When using a light source with directivity, rays will not be reflected to the mirror surface and condensing at the second focal point is impossible.
· * Luminance distribution may form a ring shape when moving away from the second focal point.
[Product Specifications]
· [Common Specifications]
· Material: Tempax®
· Coating: Al + SiO2
· [Individual Specifications]
· Outer diameter φD: 64 mm
· Thickness H: 44 mm*
· Hole Diameter φC: φ18 mm
· Ma: 31 mm
· Mb: 36 mm
· First Focal Distance A: 11
· Second Focal Distance B: 78
· * These are design values, so individual units may vary. (Not a guaranteed value)From: ฿ 10,142.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· Optimal for applications that do not require low scratch polishing for lasers, such as simple experiments and illumination optics.
· Other surface accuracies and reflectances are the same as the laser aluminum mirror (TFA).
· The aluminum features a protective coat that is damage resistant, and any dirt on the mirror surface can be wiped away.
· Reflectance with less fluctuation can be obtained over a wide wavelength range from visible light to near infrared.
· * Loss of a large amount of light may occur due to aluminum film absorption when transmitting light with multiple mirrors.
· * Use a dielectric multi-layer film mirror (TFM, etc.).
· * Reflectance for the specification shows average reflectance values of P polarization and S polarization.
· * Reflectance may vary according to the polarization of the incident beam.
[Product Specifications]
· [Common Specifications]
· Material: BK7
· Coating: Al+MgF 2
· Parallelism: < 3'
· Incidence Angle: 45°
· Laser Yield Strength: 0.25 J/cm2 (Pulse Width: 10 ns, Repetition Frequency: 20 Hz)
· Scratch-Dig: 60-40
· Effective range: Circle or ellipse inscribed in the rectangle that makes up 90% of the external diameter or 90% of the external dimensions
· [Individual Specifications]
· Outer diameter φD: φ20 mm
· Thickness t: 5 mm
· Substrate Surface Accuracy: λ/10
· Rear Surface: Sanded SurfaceFrom: ฿ 1,183.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
[Features]
· A product with surface quality one level below the spherical achromatic lens (DLB).
· It can be used in optical systems where high surface quality is not called for, as with telescope lenses or imaging lenses for microscopes.
· Specifications other than the surface quality are almost the same as DLB.
· With the exception of high-precision experiments using lasers, we recommend this lens.
· Optimized for low deviation of the focal length and minimized aberration over the entire visible light range.
· Corrected not only for aberrations on the on-axis object point but also for off-axis coma aberration and astigmatism.
· * Use achromatic lenses when imaging a picture with infinite distance as the focus or changing the positional light source to parallel light.
· * Sufficient optical performance cannot be obtained when used for imaging at a close distance, etc.
· * Achromatic lenses are oriented for incidence of parallel light.
· * Have parallel light incident from the surface with the smaller radius of curvature (the surface indicated by the arrow).
· * Having parallel light incident from the opposite side causes chromatic and spherical aberration, and enlarges the condensing spot.
[Product Specifications]
· [Common Specifications]
· Material: BK7, SF2
· Design Wavelength: Blue: 486.1 nm, Green: 546.1 nm, Blue: 656.3 nm
· Eccentricity: < 3'
· Coating: Anti-reflective Film
· Scratch-Dig: 60-40
· Effective Diameter: 90% of External Diameter
· [Individual Specifications]
· Outer diameter φD: φ15 mm
· Focal distance f: 30.1 mm
· Rim thickness te: 5.7 mm
· Central thickness tc: 8.0 mm
· Back focus fb: 26.0 mmFrom: ฿ 3,650.00 Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024RSF-25C-980RU Filter for Spectroscopy
AS ONE
[Features]
· Cutting the pump laser light, with a sharp rise, the Raman shift light on the long wavelength side can be extracted at a high transmittance.
· Can be used for detecting faint Raman scattered light.
· In the laser wavelength, this filter features light blocking properties superior to those of OD6 and has transmittance that exceeds 90% in the transmission band (RSF-25C-325RU is 80% or more).
· There is almost no light absorption by the film thanks to the dielectric multilayer film coating.
· * The transmittance wavelength characteristics may change if using an incident angle other than 0°.
· * In general, the larger the incident angle, the more the wavelength characteristics shift to the shorter wavelength side.
[Product Specifications]
· [Common Specifications]
· Coating: Dielectric Multilayer Film
· Incidence Angle: 0°
· Scratch-Dig: 60-40
· [Individual Specifications]
· Transmission Band Wavelength: 992.7 – 2,000.0 nm
· Transmission Band Transmittance: > 90%
· Laser Wavelength: 980 nm
· Cut Band Optical Density (Average): 6From: ฿ 51,723.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE Corporation, O-Ring for Full Jacket (Perfluoro)
AS ONE
AS ONE, O-ring, O-ring for Full Jacket (Perfluoro)
Materials: Perfluoro
DN: 150
Compatible reaction vessel (For mL): 3000From: ฿ 71,533.00 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE Corporation, O-Ring for Full Jacket (Perfluoro), 9200 Series
AS ONE
Product classification: single Item, material: Perfluoro
[Part Number: 62-2119-56]
Standard: 35-V
Materials: Perfluoro
[Part Number: 62-2119-57]
Materials: Perfluoro
DN: 60
Compatible reaction vessel (For mL): 300/500
[Part Number: 62-2119-58]
Materials: Perfluoro
DN: 100
Compatible reaction vessel (For mL): 1000
[Part Number: 62-2119-59]
Materials: Perfluoro
DN: 120
Compatible reaction vessel (For mL): 2000
[Part Number: 62-2119-60]
Materials: Perfluoro
DN: 200
Compatible reaction vessel (For mL): 6000From: ฿ 5,285.00 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Metallic Material for Melting (Gd)
AS ONE
Shot-shaped gadolinium used to manufacture alloys by melting metal materials at high temperatures.From: ฿ 17,633.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Metallic Material for Melting (Tm)
AS ONE
Shot-shaped thulium used to manufacture alloys by melting metal materials at high temperatures.From: ฿ 35,318.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,035.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
Made of polycarbonate with excellent strength and heat resistance.From: ฿ 4,455.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
Seal material with a configurable size.
[Features]
· PTFE is extruded into a string shape while still unfired.
[Applications]
· For flanges in chemical ducts, low pressure gases, etc.From: ฿ 2,630.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
Non-adhesive type and does not stick. Low friction and favorable sliding. Features outstanding chemical resistance.From: ฿ 722.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
Has excellent resistance against heat, cold, weather, and offers good incombustibility. Offers durability against repetitive compressive fatigue.From: ฿ 3,273.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AS ONE
Thin silicone rubber film with excellent film thickness accuracy. Features outstanding flexibility, heat resistance, and chemical resistance.From: ฿ 2,815.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AS ONE
Adhesive (one side only) is used to prevent tools from falling. Can be sterilized by autoclave, boiling water, dry heat, etc. Has no water absorbency, and dirt is also easy to clean off. Can be cut easily using scissors, cutters, etc.From: ฿ 2,639.51 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025From: ฿ 421.77 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AS ONE
[Specifications]
· Size : 3 mm X 3 mm X 1 mFrom: ฿ 112.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
It is an inorganic tape with heat-resistance and thermal insulation properties. It offers excellent safety and leaves low residue in the organism. Features outstanding chemical resistance, and can withstand erosion from dissolved metal.From: ฿ 7,318.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,599.40 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024FLONCHEMICAL
Film made from a copolymer of polytetrafluoroethylene and perfluoroalkoxyethylene. Hot melt molding of complex forms.From: ฿ 3,551.00 Special Price Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
fluoropolymer Sheet Thickness (μ) 25 – 100
FLONCHEMICAL
Film made from a copolymer of polytetrafluoroethylene and hexafluoropropylene. Covering spaces dedicated to cultivation, coating wire, etc.From: ฿ 2,605.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
fluoropolymer Sheet Thickness 1 – 10 mm
TGK
PTFE (fluororesin) fluoropolymer sheets.
[Features]
· Laboratory materials in a sheet form with excellent heat, weather and chemical resistance. The materials also boast superior electrical insulation properties as well as being non-tacky with low levels of generated friction.
· Material with a wide range of applications. Made by adding powdered raw materials blended with various types of PTFE inorganic filler and standalone PTFE and then compress molding them into their current form.
[Applications]
· Can be used for a broad range of applications including as a gasket, an electrical insulating material and as a mechanical component.From: ฿ 1,156.00 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025AS ONE
· As it is very soft and equipped with adhesive tape, it can be easily attached to surfaces with complex shapes.
· Food Sanitation Act compliant product.From: ฿ 5,613.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Alumina Protective Tube, JIS PT-0 Equivalent
AS ONE
· Features outstanding heat resistance and corrosion resistance.From: ฿ 1,467.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 538.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 1,810.34 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025UV Cut Film Width (mm) 350/1000
AS ONE
· One side is coated in adhesive and can be easily applied to windows and lab benches, etc.
· It has an embossed surface and can also be used as a protective film on an laboratory bench.From: ฿ 2,374.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
AS ONE
· It has excellent shock absorption and aseismic controlFrom: ฿ 208.00 Days to Ship:
25 Day(s)
25 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 373.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Neodymium Magnet Round External Diameter (φmm) 1–50
AS ONE
[Features]
· Neodymium magnets of various sizes and quantities are available.From: ฿ 2,058.00 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024AS ONE
It is a dense alumina rod that is used by inserting it through holes when baking products with holes.From: ฿ 3,167.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024From: ฿ 7,148.00 Special Price Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
AS ONE
This tough pitch copper cylindrical rod with high conductivity, ductility, and high strength can be used for cutting.From: ฿ 1,294.42 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025HAKKOH
Can be used in a wide range of applications and even for general industrial use.From: ฿ 389.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
HAKKOH
[Features]
· Boasts excellent cold resistance.
· Lightweight.
[Applications]
· For use in research fields and for industrial applications.From: ฿ 106.68 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSAKA CHEMICAL
[Features]
· Easy clipping of tubes with a simple press of the thumb.
· Can also be sterilized in an autoclave.
[Applications]
· Tube clipping.From: ฿ 164.71 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
HAKKOH
[Features]
· The layered structure ensures superior flexibility and workability when compared to conventional fluorine-based single layered hoses.
· The fluororesin used for the internal layers is non-toxic and conforms to the Food Sanitation Act of Japan and Notification 201 by the Ministry of Health, Labour and Welfare of Japan.
[Applications]
· For transporting chemicals, food stuffs, beverages, oils, gasoline, etc.From: ฿ 2,380.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Flexible Fluorine Tube, Chemical Resistant, Clear Type
HAKKOH
[Features]
· The internal layers are made of ETFE, providing excellent solvent and chemical resistance. Boasts resistance to the majority of chemicals.
[Applications]
· Piping for transporting chemicals, food stuffs, beverages, oils, gasoline, etc.From: ฿ 4,111.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Flexible Fluorine Tube, Reinforcement Thread Infused Type
HAKKOH
[Features]
· The layered structure ensures superior flexibility and workability when compared to conventional fluorine-based single layered hoses.
· The fluororesin used for the internal layers is non-toxic and conforms to the Food Sanitation Act of Japan and Notification 201 by the Ministry of Health, Labour and Welfare of Japan.
[Applications]
· For transporting chemicals, food stuffs, beverages, oils, gasoline, etc.From: ฿ 20,082.00 Special Price Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Specialized Fitting for Flexible Fluorine Tube, Nipple Type
HAKKOH
[Applications]
· Dedicated joint for Hakko flexible fluorine tubes.
· Multipurpose piping for printing equipment, foodstuff machinery, physics/chemistry experiments, etc.From: ฿ 1,114.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
FEATHER
Feather laboratory materials, Sample Kit A4.
[Features]
· Thickness: 22mm
· Vertical: 220mm
· Horizontal: 305mm
· Mass: 200g
[Materials]
· Paper / PP / PVC / AluminumFrom: ฿ 340.48 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
A non-adhesive cord seal made of heat and chemical resistant sealing material.
[Material]PTFEFrom: ฿ 9,676.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cold Seal Soft (Round) EA351CA-4
ESCO
【Product Specifications】
・Material-PTFE
・Heat and chemical resistant seal material
・Pressure-resistant-1.96MPa (gas)4.90MPa (liquid)
・Non-Adhesive
・Temperature range： -240 to 260℃
・Dim.…Dia. 4mm x 20mFrom: ฿ 9,676.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Cold Seal Soft (Round) EA351CA-6
ESCO
【Product Specifications】
・Material-PTFE
・Heat and chemical resistant seal material
・Pressure-resistant-1.96MPa (gas)4.90MPa (liquid)
・Non-Adhesive
・Temperature range： -240 to 260℃
・Dim.…Dia. 6mm x 10mFrom: ฿ 9,676.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 8,174.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・Material-PTFE
・Heat and chemical resistant seal material
・Pressure-resistant-1.96MPa (gas), 4.90MPa (liquid)
・With adhesive
・Temperature range： -240 to 260℃
・W (mm) x T (mm) x L (m)…6 x 3.0 x 15From: ฿ 8,174.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・Material-PTFE
・Heat and chemical resistant seal material
・Pressure-resistant-1.96MPa (gas), 4.90MPa (liquid)
・With adhesive
・Temperature range： -240 to 260℃
・W (mm) x T (mm) x L (m)…9 x 4.0 x 8From: ฿ 8,174.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
This is a code seal with adhesive that is heat-resistant and chemical-resistant.
[Material] PTFEFrom: ฿ 6,565.00 Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024ESCO
【Product Specifications】
・Material-PTFE
・Pressure-resistant-1.96MPa (gas), 4.90MPa (liquid)
・With adhesive
・Heat and chemical resistant seal material
・Temperature range： -240 to 260℃
・W (mm) x T (mm) x L (m)…30 x 1 x 15From: ฿ 14,450.00 Special Price Days to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
·Dyed resin, paraffin waterproof processing
·Ideal as hoods, seats, bags, holding bags, etc.From: ฿ 5,988.94 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
·The position of the nail and cutter guide can be adjusted at a pitch of 25 mm.
·You can cut materials neatly with your scissors or cutter along the cutter guide.
·Please purchase various options as needed.From: ฿ 2,288.56 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 5 mm, Pore Size 1.00 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it is a sintered metal material that does not contain a resin base material, it has excellent heat resistance and strength.
· A highly porous material with an interconnected pore content of 8 to 95%.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 12,602.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 5 mm, Pore Size 1.00 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 35,500.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 10 mm, Pore Size 1.00 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 12,602.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 10 mm, Pore Size 1.00 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 20,537.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 10 mm, Pore Size 1.00 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 35,500.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 1 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 14,347.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 1 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 40,397.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 2 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 14,347.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 2 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 22,280.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 5 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 14,347.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 5 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
· Porous body that can effectively diffuse a reactant.
· Conductive material that is strongly resistant to corrosion.
[Applications]
· For use as a base material or support for a catalytic coating.
· For use as a heat-resistant filter.
· For reducing the weight of structural components.From: ฿ 22,280.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 5 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· A conductive material that is very strong and highly resistant to corrosion.
· Porous body that can effectively diffuse a reactant.
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
[Applications]
· For use as a base material or support for a catalytic coating.
· For reducing the weight of structural components or as a heat resistant filter.From: ฿ 40,397.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 10 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· A conductive material that is very strong and highly resistant to corrosion.
· Porous body that can effectively diffuse a reactant.
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
[Applications]
· For use as a base material or support for a catalytic coating.
· For reducing the weight of structural components or as a heat resistant filter.From: ฿ 14,347.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/08/2024
Until 31/08/2024Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 10 mm, Pore Size 0.43 mm
AS ONE
Highly porous sponge-like metal sintered body that has connected ventilation holes.
[Features]
· A conductive material that is very strong and highly resistant to corrosion.
· Porous body that can effectively diffuse a reactant.
· As it uses sintered metal materials that do not contain a resin base material, it has excellent heat resistance and strength.
· High-porosity material that contains 8 to 95% connected ventilation holes.
[Applications]
· For use as a base material or support for a catalytic coating.
· For reducing the weight of structural components or as a heat resistant filter.From: ฿ 22,280.00 Special Price Days to Ship:
40 Day(s)
40 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Product Type |
| Material |
| Width(mm) |
| Length(mm) |
| Thickness(mm) |
| Other |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | You can add up to 6 items per a category to the compare list.  Until 31/08/2024 | |
| Brand | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | FLONCHEMICAL | FLONCHEMICAL | TGK | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | HAKKOH | HAKKOH | OSAKA CHEMICAL | HAKKOH | HAKKOH | HAKKOH | HAKKOH | FEATHER | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE | AS ONE |
| Product Series | AS ONE Corporation, O-Ring for Full Jacket (Perfluoro), 9200 Series | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 5 mm, Pore Size 1.00 mm | Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 5 mm, Pore Size 1.00 mm | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 10 mm, Pore Size 1.00 mm | Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 10 mm, Pore Size 1.00 mm | Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 10 mm, Pore Size 1.00 mm | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 1 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 1 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 2 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 2 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 5 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 5 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 150 × 150 mm, Thickness 5 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 50 × 50 mm, Thickness 10 mm, Pore Size 0.43 mm | Porous Metallic Material (SUS316L) 100 × 100 mm, Thickness 10 mm, Pore Size 0.43 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 5,815.00 | ฿ 2,705.00 | ฿ 41,752.00 Special Price On Sale Until 31/08/2024 | ฿ 15,415.00 Special Price On Sale Until 31/08/2024 | ฿ 37,898.00 Special Price On Sale Until 31/08/2024 | ฿ 2,973.00 | ฿ 7,267.00 | ฿ 3,483.00 | ฿ 3,550.00 | ฿ 4,565.00 | ฿ 19,405.00 Special Price On Sale Until 31/08/2024 | ฿ 12,542.00 Special Price On Sale Until 31/08/2024 | ฿ 17,343.00 Special Price On Sale Until 31/08/2024 | ฿ 9,905.00 | ฿ 2,705.00 | ฿ 43,948.00 Special Price On Sale Until 31/08/2024 | ฿ 64,233.00 Special Price On Sale Until 31/08/2024 | ฿ 2,705.00 | ฿ 33,807.00 Special Price On Sale Until 31/08/2024 | ฿ 7,777.00 | ฿ 41,987.00 Special Price On Sale Until 31/08/2024 | ฿ 3,212.00 | ฿ 6,762.00 | ฿ 29,073.00 Special Price On Sale Until 31/08/2024 | ฿ 10,142.00 | ฿ 1,183.00 | ฿ 3,650.00 | ฿ 51,723.00 Special Price On Sale Until 31/08/2024 | ฿ 71,533.00 | ฿ 5,285.00 | ฿ 17,633.00 Special Price On Sale Until 31/08/2024 | ฿ 35,318.00 Special Price On Sale Until 31/08/2024 | ฿ 3,035.00 | ฿ 4,455.00 | ฿ 2,630.00 | ฿ 722.00 | ฿ 3,273.00 | ฿ 2,815.00 Special Price On Sale Until 31/03/2025 | ฿ 2,639.51 Special Price On Sale Until 31/03/2025 | ฿ 421.77 Special Price On Sale Until 31/03/2025 | ฿ 112.00 Special Price On Sale Until 31/03/2025 | ฿ 7,318.00 Special Price On Sale Until 31/08/2024 | ฿ 4,599.40 | ฿ 3,551.00 Special Price On Sale Until 31/08/2024 | ฿ 2,605.00 | ฿ 1,156.00 | ฿ 5,613.00 Special Price On Sale Until 31/03/2025 | ฿ 1,467.00 | ฿ 538.00 | ฿ 1,810.34 | ฿ 2,374.00 Special Price On Sale Until 31/03/2025 | ฿ 208.00 | ฿ 373.00 | ฿ 1,488.00 Special Price On Sale Until 31/03/2025 | ฿ 2,058.00 | ฿ 3,167.00 Special Price On Sale Until 31/08/2024 | ฿ 7,148.00 Special Price On Sale Until 31/08/2024 | ฿ 1,294.42 | ฿ 389.00 Special Price On Sale Until 31/03/2025 | ฿ 106.68 | ฿ 164.71 | ฿ 2,380.00 | ฿ 4,111.00 | ฿ 20,082.00 Special Price On Sale Until 31/08/2024 | ฿ 1,114.00 | ฿ 340.48 | ฿ 9,676.00 | ฿ 9,676.00 | ฿ 9,676.00 | ฿ 8,174.00 | ฿ 8,174.00 | ฿ 8,174.00 | ฿ 6,565.00 | ฿ 14,450.00 Special Price On Sale Until 31/08/2024 | ฿ 5,988.94 | ฿ 2,288.56 | ฿ 12,602.00 Special Price On Sale Until 31/08/2024 | ฿ 35,500.00 Special Price On Sale Until 31/08/2024 | ฿ 12,602.00 Special Price On Sale Until 31/08/2024 | ฿ 20,537.00 Special Price On Sale Until 31/08/2024 | ฿ 35,500.00 Special Price On Sale Until 31/08/2024 | ฿ 14,347.00 Special Price On Sale Until 31/08/2024 | ฿ 40,397.00 Special Price On Sale Until 31/08/2024 | ฿ 14,347.00 Special Price On Sale Until 31/08/2024 | ฿ 22,280.00 Special Price On Sale Until 31/08/2024 | ฿ 14,347.00 Special Price On Sale Until 31/08/2024 | ฿ 22,280.00 Special Price On Sale Until 31/08/2024 | ฿ 40,397.00 Special Price On Sale Until 31/08/2024 | ฿ 14,347.00 Special Price On Sale Until 31/08/2024 | ฿ 22,280.00 Special Price On Sale Until 31/08/2024 |
| Days to Ship | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 20 Day(s) | 20 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | 19 Day(s) | Same day | Same day | Same day | Same day | 19 Day(s) | 5 Day(s) | 10 Day(s) | 1 Day(s) | 9 Day(s) | Same day | 5 Day(s) | 19 Day(s) | 5 Day(s) | Same day | 25 Day(s) | 19 Day(s) | Same day | 19 Day(s) | 19 Day(s) | 19 Day(s) | 5 Day(s) | Same day | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 10 Day(s) | 1 Day(s) | 10 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 11 Day(s) | 6 Day(s) | 6 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) | 40 Day(s) |
| Product Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | Seal | Sheet | Sheet | Sheet | Sheet | Sheet | Other | Tape | Material | Sheet | Sheet | Sheet | Material | Material | Material | Material | Sheet | Sheet | Sheet | Sheet | Material | Material | Material | Material | Other | Other | Other | Other | Other | Other | Other | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Acrylic | Other | Impregnated Glass Fluorine Resin | Impregnated Glass Fluorine Resin | Silicon | Silicon | Silicon | PE (polyethylene) | Vinyl Chloride / Acrylic | Other | Other | Fluororesin | Fluororesin | Fluororesin | Fluororesin | - | Other | Other | Antibacterial PP (Polypropylene) | Foam Urethane | Aluminum | Aluminum / Stainless Steel / Copper | Neodymium Magnet | Aluminum | Aluminum | Copper | Silicon | PE (polyethylene) | - | Fluororesin | Fluororesin | Fluororesin | Stainless Steel | Other | Other | - | - | Other | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 to 4 | 3 to 4 | - | - | - | 300 ～ 500 | 300 ～ 500 | 500 | 300 | 500 | - | 25 ～ 1000 | - | 1150 | 1150 | 300 | 3 ～ 12 | - | - | 150 | 350 | 100 | 50 | 100 | - | - | - | - | - | - | 9 ～ 25 | - | - | - | - | - | - | - | - | 3 ～ 16 | - | - | 20 ～ 30 | - | 920 | 1227 ～ 1228 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5000 ～ 15000 | 300 ～ 500 | 1000 | 500 | 300 | 500 | 1000 | 2000 ～ 30000 | - | 1000 | 1000 | 300 | 5000 ～ 30000 | 300 | - | 150 | 5000 | 100 | 100 | 100 ～ 300 | - | 200 ～ 1000 | 200 | 200 | - | - | - | - | - | - | - | - | 50000 ～ 400000 | - | - | 5000 ～ 30000 | - | - | 5000 ～ 15000 | - | 5000 | 56.3 ～ 200 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thickness(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.075 | 2t ～ 6T | 0.1 ～ 0.3 | 1 | 1 ～ 3 | - | 2 ～ 3 | - | - | - | 1 | 1.5 ～ 6 | - | 5 | 3.3 | - | 5 | 0.5 ～ 1 | 0.005 ～ 0.5 | 0.5 ～ 10 | - | - | - | - | - | - | - | - | - | - | 22 | - | - | - | 1.5 ～ 6 | - | - | 1 ～ 2 | - | 0.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Option | - | - | - | Option | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Laboratory Materials / Sheets / Packings
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?