(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
-
My Components
-
Similar Products
Product Detail- CAD Data unavailable
Specification/Dimensions
-
Seal Material
- Fluororubber
- H-NBR
- Fluororubber
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
-
type
- KL
Days to Ship
-
- All
- Same day
- 3 Day(s) or Less
- 6 Day(s) or Less
- 10 Day(s) or Less
- 13 Day(s) or Less
- 30 Day(s) or Less
Specify Alterations
For Spattering Resistance, Tube Fitting Brass, Elbow (Without Cover)
Click this image to zoom it.
Move the mouse over or click the image to zoom
- All
- Sale Items
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- ฿ 182.25/Unit
-
- Qty :
-
-
- Days to Ship :
- ---
-
- Total Price :
- ---
Select part number to Order Now/ Add to Cart
- CAD Data unavailable
Similar Products
Product DetailProduct Description
[Features]
· Quick connect fitting for general pneumatic piping.
· A wide lineup of products.
· After installation, the take-out angle of the resin body can be changed. (Some products)
· Centralized piping is possible.
· A light gray specification and cleanroom packaging specification are also available as options.
· The cleanroom packaging specification uses fluorine grease.
· After cleaning with clean air, packaged in a cleanroom (ISO class 6 equivalent)
Specifications Of Tube Fitting Brass - Elbow - Without Cover
Appearance of Tube Fitting Brass - Elbow - without cover
Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(metric thread)
Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(for taper pipe thread)
Usable fluids: air, water (see condition *1), heat transfer oil (see condition *2)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: HNBR specification: 0 to 100°C, FKM specification: 0 to 120°C (no freezing)
- *1 When using water or heat transfer oil, make sure the surge pressure stays below the maximum operating pressure.
- *2 Be sure to use an insert ring when using this product for water or heat transfer oil.
Size Chart
| Format | Tube Outer Diameter φD | R | A | B | L | φP | Tube End C | E | Hex H | Orifice Diameter (φmm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KL4-M5-1□ | 4 | M5 × 0.8 | 3 | 19.8 | 22.1 | 10.5 | 14.5 | 17.6 | 10 | 1.8 | 17 |
| KL4-01-1□ | R1/8 | 8 | 22.8 | 24.1 | 2.5 | 20 | |||||
| KL4-02-1□ | R1/4 | 11 | 25.8 | 25 | 14 | 29 | |||||
| KL6-M5-1□ | 6 | M5 × 0.8 | 3 | 22 | 25.3 | 12.5 | 16.6 | 20.2 | 12 | 1.8 | 24 |
| KL6-01-1□ | R1/8 | 8 | 25 | 27.3 | 4 | 27 | |||||
| KL6-02-1□ | R1/4 | 11 | 28 | 28.2 | 14 | 35 | |||||
| KL6-03-1□ | R3/8 | 12 | 29.8 | 29.7 | 17 | 47 | |||||
| KL8-01-1□ | 8 | R1/8 | 8 | 28 | 31.3 | 14.5 | 17.7 | 22.3 | 14 | 6 | 34 |
| KL8-02-1□ | R1/4 | 11 | 31 | 32.2 | 40 | ||||||
| KL8-03-1□ | R3/8 | 12 | 32.8 | 33.7 | 17 | 53 | |||||
| KL10-01-1□ | 10 | R1/8 | 8 | 32.5 | 37.8 | 18.5 | 20 | 26.1 | 17 | 6 | 62 |
| KL10-02-1□ | R1/4 | 11 | 35.5 | 38.7 | 8 | 64 | |||||
| KL10-03-1□ | R3/8 | 12 | 36.5 | 39.4 | 73 | ||||||
| KL10-04-1□ | R1/2 | 15 | 39.5 | 40.6 | 22 | 99 | |||||
| KL12-02-1□ | 12 | R1/4 | 11 | 37.5 | 42.2 | 21.5 | 22.6 | 29.7 | 21 | 8 | 100 |
| KL12-03-1□ | R3/8 | 12 | 38.5 | 42.9 | 9 | 106 | |||||
| KL12-04-1□ | R1/2 | 15 | 41.5 | 44.1 | 22 | 121 |
Units: mm
- *1 Taper thread type L dimensions are reference dimensions after tightening with screws.
- *2 For the □ at the end of the order format, input -F if you want the FKM sealing rubber material.
Applicable Tube Size
Millimeter size (mm): φ4 (diameter 4 mm), φ6 (diameter 6 mm)φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)
Compatible Thread Sizes
| Metric Thread | M5 × 0.8 |
|---|---|
| Taper Pipe Thread | R1/8, R1/4, R3/8, R1/2 |
Precautions
Warning
This product is not intended for use outside the product uses specified for the series. Please inquire concerning use of this product outside of the specified uses.
Caution
1. Tighten the bulkhead nut of the Bulkhead Union (PM), Bulkhead Union P (PMP) and Bulkhead Union Elbow (PML) range within the specified tightening torque.
Bulkhead nut torque values
| Product Name | Size Of Fitting | Tightening Torque | |
|---|---|---|---|
| Bulkhead Union (PM) | Bulkhead Union P (PMP), Bulkhead Union Elbow (PML) | ||
| Tube Fitting | 4 | 12.0 to 14.0 N·m | 0.4 to 0.6 N·m |
| 6 | 18.0 to 21.0 N·m | 0.9 to 1.1 N·m | |
| 8 | 18.0 to 21.0 N·m | 1.1 to 1.3 N·m | |
| 10 | 19.0 to 21.0 N·m | 2.3 to 2.7 N·m | |
| 12 | 19.0 to 21.0 N·m | 2.7 to 3.3 N·m | |
| 16 | 42.0 to 54.0 N·m | - | |
2. When tightening the bulkhead nut, there is a risk of deforming the tightened body. In addition, if oil adheres to the surface, the secured bulkhead part may loosen.
3. Pneumatic pipe fittings are intended to be used with the tube attached. Therefore, if air is applied with no tube attached, for example for flushing, the elastic sleeve may come off the product.
See the manufacturer's catalog for other precautions and important notes.
| Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Seal Material | Operating Temperature (°C) | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
|---|---|---|---|---|---|---|---|---|---|---|
฿ 190.52 ฿ 105.87 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 4 | R | 1/8 | ||
฿ 182.25 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 4 | R | 1/8 | ||
฿ 219.44 | FITTING | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0～100 | 4 | R | 1/4 | ||
฿ 192.51 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 4 | R | 1/4 | ||
฿ 185.87 | FITTING | 10 Piece(s) | 6 Day(s) | [H-NBR] HNBR | 0～100 | 4 | M | M5×0.8 | ||
฿ 205.77 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 4 | M | M5×0.8 | ||
฿ 211.48 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 6 | R | 1/8 | ||
฿ 282.19 | FITTING | 1 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 6 | R | 1/8 | ||
฿ 236.69 ฿ 107.67 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 6 | R | 1/4 | ||
฿ 255.08 | FITTING | 10 Piece(s) | 13 Day(s) | [Fluororubber] FKM | 0～120 | 6 | R | 1/4 | ||
฿ 273.29 | FITTING | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0～100 | 6 | R | 3/8 | ||
฿ 219.04 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 6 | R | 3/8 | ||
฿ 231.78 | FITTING | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0～100 | 6 | M | M5×0.8 | ||
฿ 215.42 ฿ 120.16 | FITTING | 10 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 6 | M | M5×0.8 | ||
฿ 225.61 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 8 | R | 1/8 | ||
฿ 327.48 | FITTING | 10 Piece(s) | 3 Day(s) | [Fluororubber] FKM | 0～120 | 8 | R | 1/8 | ||
฿ 268.55 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 8 | R | 1/4 | ||
฿ 332.13 | FITTING | 1 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 8 | R | 1/4 | ||
฿ 302.29 | FITTING | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0～100 | 8 | R | 3/8 | ||
฿ 252.20 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 8 | R | 3/8 | ||
฿ 366.58 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 10 | R | 1/8 | ||
฿ 305.28 | FITTING | 10 Piece(s) | 13 Day(s) | [Fluororubber] FKM | 0～120 | 10 | R | 1/8 | ||
฿ 322.59 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 10 | R | 1/4 | ||
฿ 403.57 | FITTING | 1 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 10 | R | 1/4 | ||
฿ 379.35 ฿ 201.06 | FITTING | 1 Piece(s) | Same day | [H-NBR] HNBR | 0～100 | 10 | R | 3/8 | ||
฿ 452.90 | FITTING | 10 Piece(s) | 3 Day(s) | [Fluororubber] FKM | 0～120 | 10 | R | 3/8 | ||
฿ 421.14 | FITTING | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0～100 | 10 | R | 1/2 | ||
฿ 340.13 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 10 | R | 1/2 | ||
฿ 443.38 | FITTING | 10 Piece(s) | 3 Day(s) | [H-NBR] HNBR | 0～100 | 12 | R | 1/4 | ||
฿ 536.52 ฿ 233.12 | FITTING | 1 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 12 | R | 1/4 | ||
฿ 455.51 | FITTING | 1 Piece(s) | 3 Day(s) | [H-NBR] HNBR | 0～100 | 12 | R | 3/8 | ||
฿ 536.52 ฿ 305.33 | FITTING | 1 Piece(s) | Same day | [Fluororubber] FKM | 0～120 | 12 | R | 3/8 | ||
฿ 548.33 | FITTING | 1 Piece(s) | 30 Day(s) | [H-NBR] HNBR | 0～100 | 12 | R | 1/2 | ||
฿ 410.06 | FITTING | 10 Piece(s) | 10 Day(s) | [Fluororubber] FKM | 0～120 | 12 | R | 1/2 |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Body Material | Brass | Application | Static electricity dissipation and anti-static properties / Sputtering Resistance / Heat Resistant | Screw Mounting, Direction | Elbow |
| Elbows | Male Elbows |
- [Information on the order unit quantity]Orders should be placed in units of ten pieces (MISUMI in stock items are available starting from single pieces).
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?