(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
[Features]
· Quick connect fitting for general pneumatic piping.
· A wide lineup of products.
· After installation, the take-out angle of the resin body can be changed. (Some products)
· Centralized piping is possible.
· A light gray specification and cleanroom packaging specification are also available as options.
· The cleanroom packaging specification uses fluorine grease.
· After cleaning with clean air, packaged in a cleanroom (ISO class 6 equivalent)
Appearance of Tube Fitting Brass - Elbow - without cover
Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(metric thread)
Dimensional drawing of Tube Fitting Brass - Elbow - without cover
(for taper pipe thread)
Usable fluids: air, water (see condition *1), heat transfer oil (see condition *2)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: HNBR specification: 0 to 100°C, FKM specification: 0 to 120°C (no freezing)
Format | Tube Outer Diameter φD | R | A | B | L | φP | Tube End C | E | Hex H | Orifice Diameter (φmm) | Mass (g) |
---|---|---|---|---|---|---|---|---|---|---|---|
KL4-M5-1□ | 4 | M5 × 0.8 | 3 | 19.8 | 22.1 | 10.5 | 14.5 | 17.6 | 10 | 1.8 | 17 |
KL4-01-1□ | R1/8 | 8 | 22.8 | 24.1 | 2.5 | 20 | |||||
KL4-02-1□ | R1/4 | 11 | 25.8 | 25 | 14 | 29 | |||||
KL6-M5-1□ | 6 | M5 × 0.8 | 3 | 22 | 25.3 | 12.5 | 16.6 | 20.2 | 12 | 1.8 | 24 |
KL6-01-1□ | R1/8 | 8 | 25 | 27.3 | 4 | 27 | |||||
KL6-02-1□ | R1/4 | 11 | 28 | 28.2 | 14 | 35 | |||||
KL6-03-1□ | R3/8 | 12 | 29.8 | 29.7 | 17 | 47 | |||||
KL8-01-1□ | 8 | R1/8 | 8 | 28 | 31.3 | 14.5 | 17.7 | 22.3 | 14 | 6 | 34 |
KL8-02-1□ | R1/4 | 11 | 31 | 32.2 | 40 | ||||||
KL8-03-1□ | R3/8 | 12 | 32.8 | 33.7 | 17 | 53 | |||||
KL10-01-1□ | 10 | R1/8 | 8 | 32.5 | 37.8 | 18.5 | 20 | 26.1 | 17 | 6 | 62 |
KL10-02-1□ | R1/4 | 11 | 35.5 | 38.7 | 8 | 64 | |||||
KL10-03-1□ | R3/8 | 12 | 36.5 | 39.4 | 73 | ||||||
KL10-04-1□ | R1/2 | 15 | 39.5 | 40.6 | 22 | 99 | |||||
KL12-02-1□ | 12 | R1/4 | 11 | 37.5 | 42.2 | 21.5 | 22.6 | 29.7 | 21 | 8 | 100 |
KL12-03-1□ | R3/8 | 12 | 38.5 | 42.9 | 9 | 106 | |||||
KL12-04-1□ | R1/2 | 15 | 41.5 | 44.1 | 22 | 121 |
Units: mm
Millimeter size (mm): φ4 (diameter 4 mm), φ6 (diameter 6 mm)φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)
Metric Thread | M5 × 0.8 |
---|---|
Taper Pipe Thread | R1/8, R1/4, R3/8, R1/2 |
Warning
This product is not intended for use outside the product uses specified for the series. Please inquire concerning use of this product outside of the specified uses.
Caution
1. Tighten the bulkhead nut of the Bulkhead Union (PM), Bulkhead Union P (PMP) and Bulkhead Union Elbow (PML) range within the specified tightening torque.
Bulkhead nut torque values
Product Name | Size Of Fitting | Tightening Torque | |
---|---|---|---|
Bulkhead Union (PM) | Bulkhead Union P (PMP), Bulkhead Union Elbow (PML) | ||
Tube Fitting | 4 | 12.0 to 14.0 N·m | 0.4 to 0.6 N·m |
6 | 18.0 to 21.0 N·m | 0.9 to 1.1 N·m | |
8 | 18.0 to 21.0 N·m | 1.1 to 1.3 N·m | |
10 | 19.0 to 21.0 N·m | 2.3 to 2.7 N·m | |
12 | 19.0 to 21.0 N·m | 2.7 to 3.3 N·m | |
16 | 42.0 to 54.0 N·m | - |
2. When tightening the bulkhead nut, there is a risk of deforming the tightened body. In addition, if oil adheres to the surface, the secured bulkhead part may loosen.
3. Pneumatic pipe fittings are intended to be used with the tube attached. Therefore, if air is applied with no tube attached, for example for flushing, the elastic sleeve may come off the product.
See the manufacturer's catalog for other precautions and important notes.
Part Number |
---|
KL10-01-1-F |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Seal Material | Operating Temperature (°C) | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
---|---|---|---|---|---|---|---|---|---|---|
฿ 305.28 | FITTING | 10 Piece(s) | 13 Day(s) | [Fluororubber] FKM | 0~120 | 10 | R | 1/8 |
Loading...
Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air |
---|---|---|---|---|---|
Body Material | Brass | Application | Static electricity dissipation and anti-static properties / Sputtering Resistance / Heat Resistant | Screw Mounting, Direction | Elbow |
Elbows | Male Elbows |
Please check the type/dimensions/specifications of the part KL10-01-1-F in the For Spattering Resistance, Tube Fitting Brass, Elbow (Without Cover) series.
Part Number |
---|
KL10-01-1 |
KL10-02-1 |
KL10-02-1-F |
KL10-03-1 |
KL10-03-1-F |
KL10-04-1 |
Part Number | Price | Minimum Order Qty | Volume Discount | Days to Ship | Seal Material | Operating Temperature (°C) | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
---|---|---|---|---|---|---|---|---|---|
฿ 366.58 | 1 Piece(s) | Same day | [H-NBR] HNBR | 0~100 | 10 | R | 1/8 | ||
฿ 322.59 | 1 Piece(s) | Same day | [H-NBR] HNBR | 0~100 | 10 | R | 1/4 | ||
฿ 403.57 | 1 Piece(s) | Same day | [Fluororubber] FKM | 0~120 | 10 | R | 1/4 | ||
฿ 379.35 | 1 Piece(s) | Same day | [H-NBR] HNBR | 0~100 | 10 | R | 3/8 | ||
฿ 452.90 | 10 Piece(s) | 3 Day(s) | [Fluororubber] FKM | 0~120 | 10 | R | 3/8 | ||
฿ 421.14 | 10 Piece(s) | 10 Day(s) | [H-NBR] HNBR | 0~100 | 10 | R | 1/2 |
How can we improve?
How can we improve?