Rotating Element Piping, Low Rotary Joint Elbow
Caution
Product Description
A one-touch fitting elbow for oscillating and rotating parts in general pneumatic piping.
[Features]
· The bearings in the rotating part allow it to be used in oscillating and rotating parts.
[Applications]
· Piping equipment for rotating parts.
· Equipment for semiconductor manufacturing processes.
Rotary Joint - Elbow Specifications
Appearance of Rotary Joint
Elbow dimensional drawing
Usable fluids: air
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (no freezing)
Compatible sizes
Tube sizes
Millimeter size: φ4 (diameter 4 mm), φ6 (diameter 6 mm), φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)
Inch size: φ1/4 (diameter 1/4in), φ5/16 (diameter 5/16in), φ3/8 (diameter 3/8in)
Thread size
Metric thread: M5 × 0.8, M6×1
Taper pipe thread: R1/8, R1/4, R3/8, R1/2
| Format | Tube Outer Diameter φD | R | A | B | L | φp | Tube End C | E | Hex H | Allowable Rotational Speed (min-1) | Rotational Torque (N·cm) | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RL4-M5 | 4 | M5 × 0.8 | 3 | 20.5 | 22.5 | 10 | 14.9 | 19.7 | 12 | 500 | 0.6 | 1.5 | 13 |
| RL4-M6 | M6 × 1 | 4 | 21.5 | 4 | 14 | ||||||||
| RL4-01 | R1/8 | 8 | 22 | 23 | 2.9 | 15 | |||||||
| RL6-M5 | 6 | M5 × 0.8 | 3 | 23.3 | 26.5 | 12.5 | 17 | 22.8 | 14 | 500 | 1.2 | - | 20 |
| RL6-M6 | M6 × 1 | 4 | 24.3 | 6.1 | |||||||||
| RL6-01 | R1/8 | 8 | 24 | 26.2 | 7.5 | 19 | |||||||
| RL6-02 | R1/4 | 11 | 26 | 24 | |||||||||
| RL8-01 | 8 | R1/8 | 8 | 31.5 | 34.7 | 14.5 | 18.2 | 25.7 | 17 | 400 | 1.5 | 16.5 | 35 |
| RL8-02 | R1/4 | 11 | 30.5 | 31.7 | 33 | ||||||||
| RL8-03 | R3/8 | 12 | 31.4 | 41 | |||||||||
| RL10-01 | 10 | R1/8 | 8 | 35.3 | 40 | 17.5 | 20.7 | 29.5 | 22 | 300 | 2 | 22 | 61 |
| RL10-02 | R1/4 | 11 | 38.3 | 41 | 21 | 67 | |||||||
| RL10-03 | R3/8 | 12 | 36.3 | 38.7 | 30 | 63 | |||||||
| RL10-04 | R1/2 | 15 | 38.8 | 39.3 | 24 | 79 | |||||||
| RL12-02 | 12 | R1/4 | 11 | 41 | 45.5 | 21 | 23.4 | 32.7 | 24 | 250 | 2.5 | 42.5 | 84 |
| RL12-03 | R3/8 | 12 | 41.5 | 45.7 | 85 | ||||||||
| RL12-04 | R1/2 | 15 | 43.8 | 91 | |||||||||
| RL1/4-01 | 1/4 | R1/8 | 8 | 24 | 26.2 | 12.5 | 17 | 22.8 | 14 | 500 | 1.2 | 7.5 | 19 |
| RL1/4-02 | R1/4 | 11 | 26 | 24 | |||||||||
| RL5/16-01 | 5/16 | R1/8 | 8 | 31.5 | 34.7 | 14.5 | 18.2 | 25.7 | 17 | 400 | 1.5 | 16.5 | 35 |
| RL5/16-02 | R1/4 | 11 | 30.5 | 31.7 | 33 | ||||||||
| RL5/16-03 | R3/8 | 12 | 31.4 | 41 | |||||||||
| RL3/8-03 | 3/8 | R3/8 | 12 | 36.3 | 38.7 | 17.5 | 20.7 | 29.5 | 22 | 300 | 2 | 30 | 63 |
| RL3/8-04 | R1/2 | 15 | 38.3 | 39.3 | 79 |
Units: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
- *min-1: number of revolutions per minute.