Gauge Steel Pin Gauge Sub Zero Treated
Brand :
MISUMI
Caution
Product Description
Gauge diameter is available in 1/100 increments specified (PING-G), and in 1/1,000 increments specified (PING-GX).
[Specifications]
· Material: Gauge steel (SUJ equivalent).
(SKH equivalent for 0.10 to 0.999 mm)
· Comes in a plastic case (color: gray)
Specifications
| Model Number | Gauge Diameter D 0.01 mm Increment | Total Length L | Set Range No. | |
| No. | ||||
| PING-G (1/100 Increment Base Specified) | 0.1 | 0.10 | 40 | - |
| 0.2 | 0.11 ~0.19 | 1 | ||
| 0.3 | 0.20 ~0.29 | 2 | ||
| 0.5 | 0.30 ~0.49 | 3 | ||
| 1 | 0.50 ~0.99 | |||
| 1.5 | 1.00 ~1.49 | 50 | ||
| 2 | 1.50 ~1.99 | |||
| 2.5 | 2.00 ~2.49 | |||
| 3 | 2.50 ~2.99 | |||
| 3.5 | 3.00 ~3.49 | |||
| 4 | 3.50 ~3.99 | |||
| 4.5 | 4.00 ~4.49 | |||
| 5 | 4.50 ~4.99 | |||
| 5.5 | 5.00 ~5.49 | |||
| 6 | 5.50 ~5.99 | |||
| 6.5 | 6.00 ~6.49 | |||
| 7 | 6.50 ~6.99 | |||
| 7.5 | 7.00 ~7.49 | |||
| 8 | 7.50 ~7.99 | |||
| 8.5 | 8.00 ~8.49 | |||
| 9 | 8.50 ~8.99 | |||
| 9.5 | 9.00 ~9.49 | |||
| 10 | 9.50 ~ 10.00 | |||
| 11 | 10.01 ~ 11.00 | 4 | ||
| 12 | 11.01 ~ 12.00 | |||
| 13 | 12.01 ~ 13.00 | |||
| 14 | 13.01 ~ 14.00 | 5 | ||
| 15 | 14.01 ~ 15.00 | |||
| 16 | 15.01 ~ 16.00 | 6 | ||
| 17 | 16.01 ~ 17.00 | |||
| 18 | 17.01 ~ 18.00 | 7 | ||
| 19 | 18.01 ~ 19.00 | |||
| 20 | 19.01 ~ 20.00 |
| Model Number | Gauge Diameter D 0.001 mm Increment | Total Length L | Set Range No. | |
| No. | ||||
| PING-GX (1/1000 Increment Base Specified) | 1 | 0.501 ~0.999 | 40 | 8 |
| 1.5 | 1.001 ~1.499 | 50 | 9 | |
| 2 | 1.501 ~1.999 | |||
| 2.5 | 2.001 ~2.499 | |||
| 3 | 2.501 ~2.999 | |||
| 3.5 | 3.001 ~3.499 | |||
| 4 | 3.501 ~3.999 | |||
| 4.5 | 4.001 ~4.499 | |||
| 5 | 4.501 ~4.999 | |||
| 5.5 | 5.001 ~5.499 | |||
| 6 | 5.501 ~5.999 | |||
| 6.5 | 6.001 ~6.499 | 10 | ||
| 7 | 6.501 ~6.999 | |||
| 7.5 | 7.001 ~7.499 | |||
| 8 | 7.501 ~7.999 | |||
| 8.5 | 8.001 ~8.499 | |||
| 9 | 8.501 ~8.999 | |||
| 9.5 | 9.001 ~9.499 | |||
| 10 | 9.501 ~9.999 | |||
| 11 | 10.001 ~ 10.999 | 11 | ||
| 12 | 11.001 ~ 11.999 | |||
| 13 | 12.001 ~ 12.999 | |||
| 14 | 13.001 ~ 13.999 | 12 | ||
| 15 | 14.001 ~ 14.999 | |||
| 16 | 15.001 ~ 15.999 | 13 | ||
| 17 | 16.001 ~ 16.999 | |||
| 18 | 17.001 ~ 17.999 | 14 | ||
| 19 | 18.001 ~ 18.999 | |||
| 20 | 19.001 ~ 19.999 |
(1/100 Increment Base Specified Type).
Alterations
| Applicable Products | Additional Machining Content | Code | Details |
| PING-G [ ! ]10.01 ≤ D PING-PG PING-MG [ ! ]D ≥ 1.0 | Dimension Marking Change | NP | Add "0" to 1/1000 Increment Base ex. 12.00 --> 12.000 |
| PING-G PING-GX PING-PG PING-MG | Inspection Table Attached | CS | An inspection table that describes the measured values in 0.001 mm is attached |
