Compression Spring - I.D. Referenced Stainless Steel, Light Load [RoHS Compliant]
Brand :
MISUMI
Caution
- This product can be purchased in quantities of 10pcs. Please enter your order quantity in multiples of 10. * Minimum order quantity (10 pcs. or more)
- Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
- Stainless Steel Spring is magnetic.
Product Description
・ Spring type: Compression Spring, Light Load
・ I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
・ Spring material: Made of stainless steel SUS304-WPB
・ Model type: E-GVUF, E-GVUR
・ Inner diameter D (Ø) [mm]: 5, 6, 8, 10, 12, 16
・ Free length range [mm]: 15, 20, 25, 30, 35, 40
・ End face type: No grinding, With grinding
・ RoHS compliant certified
Product Overview
[Product Comparison Information]
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
♢Economy series compression springs are manufactured overseas, resulting in significant cost reductions.
♢ Since it is an I.D. referenced type spring, it is manufactured with priority given to I.D. tolerances. Please be careful.
♢ Stainless Steel Spring is magnetic. Please be careful.
| Item | MISUMI's Similar Products | Economy Series |
| Service Life | 1 million times | 700,000 Times |
| Manufactured | In Japan | Outside of Japan |
Dimensional Drawing
Closed Ends (*Both Ends Not Ground) Close Ends (Both Ends Ground) +0.6 mm +0.1 mm +0.8 mm +0.1 mm
| I.D. D | Free Length L | Spring Constant | |||
| ø8 or Less | L = 50 or less ±1 mm | ±10% | |||
| ø10 or More | L = 60 ±2 mm |
Specification Table
| Ordering Example | Part Number |
| E－GVUR8－20 |
■E-GVUR: Fmax (allowable deflection) = L x 60%
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type | D－L | ||||||||
| E-GVUR | 5-15* | 5.9 | 0.45 | 9 | 2.65{0.27} | 1.7 | 5.0 | 10.0 | |
| 20* | 12 | 3.53{0.36} | 2.2 | ||||||
| 25* | 6.0 | 0.50 | 15 | 4.41{0.45} | 1.9 | 7.5 | 14.0 | ||
| 30* | 18 | 5.29{0.54} | 2.3 | ||||||
| 6-15* | 7.0 | 0.50 | 9 | 2.65{0.27} | 1.9 | 5.0 | 9.0 | ||
| 20* | 7.1 | 0.55 | 12 | 3.53{0.36} | 2.0 | 6.6 | 11.0 | ||
| 25* | 15 | 4.41{0.45} | 2.5 | ||||||
| 30* | 18 | 5.29{0.54} | 3.0 | ||||||
| 35* | 7.2 | 0.60 | 21 | 6.17{0.63} | 2.7 | 9.0 | 14.0 | ||
| 40* | 24 | 7.06{0.72} | 3.0 | ||||||
| 60* | 7.4 | 0.70 | 36 | 10.59{1.08} | 2.5 | 18.2 | 25.0 | ||
| 8-20* | 9.3 | 0.65 | 12 | 3.53{0.36} | 2.4 | 6.8 | 9.5 | ||
| 25* | 15 | 4.41{0.45} | 2.9 | ||||||
| 30* | 9.4 | 0.70 | 18 | 5.29{0.54} | 2.7 | 9.1 | 12.0 | ||
| 35* | 21 | 6.17{0.63} | 3.2 | ||||||
| 40* | 24 | 7.06{0.72} | 3.6 | ||||||
| 60* | 9.6 | 0.80 | 36 | 10.58{1.08} | 3.2 | 16.8 | 20.0 | ||
| 10-20* | 11.4 | 0.70 | 12 | 3.53{0.36} | 3.3 | 5.6 | 7.0 | ||
| 25* | 11.5 | 0.75 | 15 | 4.41{0.45} | 3.1 | 7.5 | 9.0 | ||
| 30* | 11.6 | 0.80 | 18 | 5.29{0.54} | 2.7 | 10.4 | 12.0 | ||
| 35* | 21 | 6.17{0.63} | 3.2 | ||||||
| 40* | 24 | 7.06{0.72} | 3.6 | ||||||
| 12-25* | 13.6 | 0.80 | 15 | 4.41{0.45} | 3.6 | 7.2 | 8.0 | ||
| 16-35* | 18.0 | 1.00 | 21 | 6.17{0.63} | 4.7 | 9.5 | 8.5 | ||
| 40* | 24 | 7.06{0.72} | 5.3 | ||||||
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■E-GVUF: Fmax. (allowable deflection) = L × 45%
kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
| Part Number | O.D. D1 (Reference Value) | Wire Dia. d | F max. | N (kgf) max. | Pitch (Reference Value) | Solid Length (Reference Value) | Total Coils (Reference Value) | ||
| Type D-L | |||||||||
| E-GVUF | 5-15* | 6.0 | 0.5 | 6.8 | 3.33{0.34} | 2.3 | 4.3 | 7.5 | |
| 6-15 | 7.2 | 0.6 | 6.8 | 3.33{0.34} | 1.9 | 6.0 | 9.0 | ||
| 20 | 9.0 | 4.41{0.45} | 2.5 | ||||||
| 25 | 11.3 | 5.49{0.56} | 3.1 | ||||||
| 8-20 | 9.4 | 0.7 | 9.0 | 4.41{0.45} | 3.1 | 6.0 | 7.5 | ||
| 10-40 | 11.8 | 0.9 | 18.0 | 8.82{0.90} | 4.4 | 9.9 | 10 | ||
[kgf] = N × 0.101972
[ ! ] Both ends of * marked springs are not ground.
[ ! ] Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
[ ! ] I.D. Referenced Type is inner diameter prioritized, and the O.D. is a reference value.
[!] If the order quantity is 200 or more, the product may be delivered in excess quantity. Thank you for your understanding.
■Spring Constant (N/mm) [kgf/mm]
| O.D. D | O.D. Referenced | ||||||||
| E-GUV | E-GUY | E-GUR | E-GUF | E-GUL | E-GUTT | E-GUM | E-GUH | E-GUBB | |
| 2 | 0.05 {0.005} | 0.20 {0.02} | 0.30 {0.03} | 0.50 {0.05} | |||||
| 3 | 0.05 {0.005} | 0.098 {0.010} | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.1} | 1.5 {0.15} | |||
| 4 | 2.0 {0.2} | 2.9 {0.3} | 4.9 {0.5} | ||||||
| 5 | 2.0 {0.2} | ||||||||
| 6 | 2.9 {0.3} | 5.9 {0.6} | 9.8 {1.0} | ||||||
| 8 | |||||||||
| 10 | 0.200 {0.020} | ||||||||
| 12 | |||||||||
| 13 | 2.0 {0.2} | 2.9 {0.3} | 9.8 {1.0} | 19.6 {2.0} | |||||
| 16 | 0.49 {0.05} | ||||||||
| 20 | 0.98 {0.10} | 2.90 {0.3} | 4.9 {0.5} | 14.7 {1.5} | 29.4 {3.0} | ||||
| Fmax. | F = L × 70% | F = L × Fa% | F = L × Fa% | F = L × 45% | F = L × 40% | F = L × Fa% | F = L × 35% | F = L × 30% | F = L × 25% |
| I.D. D | I.D. Referenced | |||
| E-GVUR | E-GVUF | E-GVUL | E-GVUM | |
| 5 | 0.29 {0.03} | 0.49 {0.05} | 0.98 {0.10} | 2.94 {0.30} |
| 6 | ||||
| 8 | ||||
| 10 | ||||
| 12 | ||||
| 16 | ||||
| Fmax. | F= L × 60% | F= L × 45% | F= L × 40% | F= L × 35% |
Related Products
| [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Extra Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Light Load | [Economy Series]Compression Spring - O.D. Referenced Stainless Steel, Heavy Load | ||
 |  |  | ||
| Type: E-GUF, E-GUR, E-GUV, E-GUY | Type: E-GUL, E-GUTT | Type: E-GUH, E-GUM |
Note
Cautions on UseOperating Temperature
Stainless Steel:: -10 to 100°C
* Load value attenuates when tension springs are used in temperature higher than above, although it depends on other conditions.
Stainless Steel Spring is magnetic.