(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน พฤษภาคม 2567 | Notice holiday in May 2024 > คลิก
Universal Joints
Configure
Specification/Dimensions
-
Shaft Bore Dia. (machined) D1(Ø)
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
-
Overall Length W(mm)
- 9
- 12
- 15
- 16
- 18
- 19.1
- 19.4
- 20
- 21
- 22.4
- 23
- 23.6
- 24
- 24.2
- 26.5
- 27
- 27.2
- 28
- 28.5
- 30
- 30.6
- 31
- 32
- 33
- 33.5
- 34
- 35
- 35.3
- 35.6
- 36
- 37.6
- 39
- 40
- 41.7
- 42
- 43
- 44
- 45
- 45.6
- 46.2
- 48
- 49.5
- 50
- 50.8
- 51
- 51.4
- 52
- 53.3
- 54
- 55
- 56
- 58
- 59
- 60
- 62
- 62.1
- 64
- 65
- 67.5
- 67.6
- 68
- 70
- 71
- 72
- 73
- 74
- 75
- 75.5
- 76
- 80
- 81
- 82
- 83
- 84
- 86
- 87
- 88
- 89.8
- 90
- 92
- 94
- 94.5
- 95
- 96
- 100
- 102
- 104
- 105
- 105~232
- 108
- 112
- 117.5
- 120
- 122
- 122~237
- 124
- 125
- 126
- 127
- 129
- 130
- 130.5~238
- 131~250
- 132~245
- 134
- 136~269
- 136.5~244
- 139
- 140
- 143
- 144
- 144~275
- 145
- 147.5~402
- 148.5~252
- 149
- 150
- 153
- 155.5~409
- 156
- 158
- 160
- 162~270
- 163
- 163~265
- 164
- 164~283
- 165
- 167
- 168
- 168~287
- 168.5~266.5
- 175
- 175.5~423.5
- 176~297
- 178
- 179~418
- 180
- 180~277
- 180.5~423.5
- 182
- 185~423
- 187.5~433
- 190
- 192
- 192~360
- 194~309
- 195
- 198~366
- 200
- 206
- 207~440
- 212
- 212~321
- 212~440
- 219~373
- 219~450
- 220
- 220~547
- 224~325
- 224~551
- 228
- 231~458
- 233~331
- 241~391
- 242~561
- 244~404
- 248
- 248~567
- 250
- 257~575
- 259~403
- 262~580
- 264~351
- 265~577
- 268~584.5
- 269~422
- 270
- 270~444
- 275
- 283~593
- 284~454
- 288~599
- 290
- 294~794
- 295~602
- 298
- 299~436
- 300
- 305~535
- 307~533
- 310
- 312~808.5
- 316~480
- 318~621.5
- 319~811
- 324~806
- 326
- 329~819
- 330~451
- 335~842
- 340
- 340~1018
- 343~638.5
- 345~575
- 349~581
- 350
- 353~1036
- 355~842
- 355~1040
- 360~1034
- 380~500
- 383~528
- 388~528
- 390
- 395~1065
- 397~599
- 399~599
- 399~617
- 401~1072
- 403~878
- 403~880.5
- 407~605
- 425~1094
- 426
- 434~645
- 437~1101
- 441~645
- 444~1094
- 444~1095
- 458~1095
- 465~1122
- 465~1125.5
- 485
- 517~685
- 520~1136
- 530~1164
- 546~711
- 553~711
- 556~1185
- 556~1188.5
- 588~1182
- 650~1223
- 690~1255
- 760~1312
-
Features
-
Application
-
Type
-
Max. Rotational Speed Range(r/min)
-
Body Material
-
Allowable Torque(N•m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 65 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Universal Joints - Set Keyway / Tapped
MISUMI
[Features]No pin hole machining is required on the shaft, but only keyway machining is required to tighten.From: ฿ 129.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MISUMI
[Features]·This is a coupling that allows the joining angle to be changed freely.From: ฿ 129.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Type Wear-Resistant HJ Series
MIYOSHI KIKAI
[Features]
· A total hardening treatment used to increase fatigue strength.
· Alterations cannot be performed on hardened products.
· To extend lifespan of joints, boots and oil pack should be used.
· When the shaft bore is T-shaped, indicate the new JIS key or the old JIS key.
· In keyway processed type, the strong pins and shear pins are not included.From: ฿ 1,297.43 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
![Encoder type coupling - set screw type- [SFC]](//th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_b$)
Encoder type coupling - set screw type- [SFC]
SUNGIL
[Features]
· Can simultaneously absorb large allowable deviation angles, eccentricity and end play.
· Impacts and vibration completely absorbed.
· Oil-free, low moment of inertia.From: ฿ 570.50 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MIYOSHI KIKAI
SPS (spline shaft) and SPA / SPO (spline sleeve) are made of S-45C. Can also be used for the sliding part during rotation.From: ฿ 826.25 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Reinforced B-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Shaft can be freely cut at any point.
· Expansion / contraction range is large for broad range of installations.From: ฿ 6,088.76 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MIKI PULLEY
High rigidity with high precision pin and dry metal to minimize backlash.
[Features]
· The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
· As it is universal type, the shaft reaction force due to installation error is extremely small.
· With damping effect due to sliding friction surface of pin and dry metal.From: ฿ 1,508.58 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MIYOSHI KIKAI
SPSS (spline shaft), SPAS/SPOS (spline sleeve) material: SUS304.
[Features]
· Please pay attention to the effective dimensions of spline for sleeve and shaft cutting.
· Use on the sliding part during rotation.From: ฿ 2,346.88 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Universal Joint Coupling - Clamping Long Type -
SUNGIL
Brand-name products provided by MISUMI are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.From: ฿ 1,277.12 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Type Wear-Resistant HJD Type
MIYOSHI KIKAI
[Features]
· A total hardening treatment used to increase fatigue strength.
· Alterations cannot be performed on hardened products.
· When the shaft bore is T-shaped, indicate the new JIS key or the old JIS key.
· In keyway processed type, the strong pins and shear pins are not included.From: ฿ 2,346.72 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type with shaft, joint with hexagonal shaft, precision type, H-GX type
MIYOSHI KIKAI
The amount of expansion and contraction that can be freely cut at any part of the intermediate shaft is large, and the mounting range is wide.From: ฿ 8,066.73 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 570.50 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Precision Shaft Fitting, Correctable, UA-C Series
SAKAI MANUFACTURING
Ideal for high-accuracy and highly-responsive control.
[Features]
· Highly-rigid body and double-bolt clamp specification is suitable for high-accuracy and highly-responsive control.From: ฿ 1,412.14 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Type, Power Type B Series
MIYOSHI KIKAI
[Features]
· To extend lifespan of joints, boots and oil pack should be used.
· When the shaft bore shape is B or T, please indicate if it is a new or former JIS key.
· Spring pins are not included when keyways have been machined on.From: ฿ 1,015.51 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type Corrosion Resistant HS Series/BS Series/HSS Series
MIYOSHI KIKAI
[Features]
· Dry lubrication is applied to improve abrasion-resistance (HS-16 or higher).
· When the shaft bore shape is B or T, please indicate if it is a new or former JIS key.
· When key groove is processed, spring pin is not attachedFrom: ฿ 1,776.39 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type Hobby Type R Series
MIYOSHI KIKAI
For low torque manual use. Material: SUM24L. Surface plating processed.From: ฿ 802.35 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shaft Type Joint With Hex Shaft, Wear-Resistant HJ-GX Model
MIYOSHI KIKAI
[Features]
· A joint with a hexagonal shaft that can be freely cut at any point.
· Expansion/contraction range is large for a broad range of installations.From: ฿ 5,989.29 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plastic Universal Joint, MC Series
MIGHTY
[Features]
·Zero backlash
·Angle absorption of 45 degrees for single and 90 degrees for double
·Electrical insulation, non-magnetic
·Lightweight and does not require lubrication
·Excellent durability and chemical resistance
[Applications]
·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
·Information equipment, communication equipment, switching systems
·audio equipment, audiovisual equipment
·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
·Air conditioners, environmental equipment, educational models, leisure models, etc.From: ฿ 494.24 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025From: ฿ 1,032.06 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Corrosion Resistant Type HSD/BSD
MIYOSHI KIKAI
[Features]
· Dry lubrication is applied to improve abrasion-resistance (HSD-16 or higher).
· Specify whether the JIS key is new or old one when the shaft shape is B or T.
· With keyway processing, the spring pins are not includedFrom: ฿ 3,479.61 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Plastic / Universal / Joint MCM Series
MIGHTY
[Features]
·Zero backlash
·Angle absorption of 45 degrees for single and 90 degrees for double
·Electrical insulation, non-magnetic
·Lightweight and does not require lubrication
·Excellent durability and chemical resistance
[Applications]
·Computers and Peripherals, Instrumentation Equipment, Controllers, Control Systems
·Information equipment, communication equipment, switching systems
·audio equipment, audiovisual equipment
·Office equipment, copiers, medical equipment, precision equipment, printing machines, textile machines, vending machines
·Air conditioners, environmental equipment, educational models, leisure models, etc.From: ฿ 1,441.98 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Double Universal Joint with Plain Bearing
RS Pro
Carbon steel universal joints for connecting equipment where there is a misalignment greater than 5 degrees up to an angle of 90 degrees. These universal joints are constructed using wear resistant sliding bushes, suitable for applications with speeds of up to 1000 rpm. Smooth and silent operation, suitable applications include connection of conveyers, line shafts and drive shafts. Gaiters and regular lubrication are recommended to ensure longevity in service.From: ฿ 6,694.55 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Single, Plain, Bore 25mm, 108mm Length
RS Pro
Specifications
Number of Joints = Single
Joint Type = Plain
Hub Type = Bored Hub
Bore = 25mm
Hub Outer Diameter = 42mm
Overall Length = 108mm
Maximum Working Angle = 45°
Peak Torque = 600Nm
Material = Steel
Maximum Speed = 1000rpmFrom: ฿ 4,077.10 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type, Strong Type BD Series
MIYOSHI KIKAI
[Features]
· For distributing high torque.
· Material: S45C.
· To extend lifespan of joints, boots and oil pack should be used.
· When the shaft bore shape is B or T, please indicate new JIS key, or previous JIS key.
· With keyway processing, the spring pins are not includedFrom: ฿ 1,915.57 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Bearing Model, KD Model
MIYOSHI KIKAI
[Features]
·Uses grease-encapsulated needle bearings, making it suitable for high-speed rotation.From: ฿ 10,974.94 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Bearing K-GX Type of Hexagonal Shaft Joint
MIYOSHI KIKAI
[Features]
· Comprises 2 standard joints and joint slide (GXS, GXA).
· Joint and join slide are set with spring pin.
· When shaft machining (keyway, tapping hole, etc.), after making the mating mark, remove the spring pin, and release the joint and joint slide.
· After machining, be sure to set back to the original position according to mating mark. (HJ-GX uses a joint pin instead of a spring pin.)
· When setting, please ensure symmetry of left / right joint assembly E yoke and F yoke.
· Please note, if set incorrectly, output wheel speed will become uneven.From: ฿ 15,065.35 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Large plastic universal joint MD series
MIGHTY
[Features]
·Zero backlash
·Electrical insulation, non-magnetic
·Oil free
·Resistant to pushing and pulling
·Light weight, low inertia
[Applications]
·Control systems, push-pull transmission mechanisms, audio equipment, audio-visual equipment, textile machinery, instrumentation equipment, environmental equipment, equipment for outdoor useFrom: ฿ 2,131.39 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Universal Joint Coupling -Set Screw Type- [SCJ]](//th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_b$)
Universal Joint Coupling -Set Screw Type- [SCJ]
SUNGIL
Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.From: ฿ 1,032.06 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…6mm
・Length…33mm
・Torque…7.8NmFrom: ฿ 1,086.39 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Double, Plain, Bore 22mm, 145mm Length
RS Pro
Specifications
Number of Joints = Double
Joint Type = Plain
Hub Type = Bored Hub
Bore = 22mm
Hub Outer Diameter = 45mm
Overall Length = 145mm
Maximum Working Angle = 90°
Peak Torque = 600Nm
Material = Steel
Maximum Speed = 1000rpmFrom: ฿ 5,506.10 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Single, Plain, Bore 10mm, 48mm Length
RS Pro
Specifications
Number of Joints = Single
Joint Type = Plain
Hub Type = Bored Hub
Bore = 10mm
Hub Outer Diameter = 22mm
Overall Length = 48mm
Maximum Working Angle = 45°
Peak Torque = 600Nm
Material = Steel
Maximum Speed = 1000rpmFrom: ฿ 2,421.03 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type Precision S Model
MIYOSHI KIKAI
[Features]
· When processing, make sure to refer to the next processing request.
· To extend lifespan of joints, boots and oil pack should be used.
· When the shaft bore shape is B or T, please indicate if it is a new or former JIS key.
· Spring pins are not included when keyways have been machined on.From: ฿ 1,950.23 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Standard Precision Type D Model
MIYOSHI KIKAI
[Features]
· Spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.From: ฿ 4,339.83 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Bearing Model, K Model
MIYOSHI KIKAI
[Features]
·Grease-filled needle bearings are used, making them suitable for high-speed rotation.
·The attached spring pin hole should be machined at the same time as the shaft at the l/2 position.
·K-20 and above have a grease nipple.
·When using boots, please use type B or type H.
·If the shaft hole shape is B or T, please specify the new JIS key or the old JIS key.
·With keyway processing, the spring pins are not included.
[Applications]
·For high speed rotation.From: ฿ 4,283.27 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Joint Boots B Series H Series (Refueling Maintenance)
MIYOSHI KIKAI
Use for dust-proof and oil splash-prevention measures.From: ฿ 370.84 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Joint Boots HJ Series (Re-Oiling Maintenance)
MIYOSHI KIKAI
Use for dust prevention and oil splash prevention.From: ฿ 349.10 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Type with shaft, joint with hexagonal shaft, precision type, S-GX type
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.From: ฿ 9,517.15 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
With Shaft Model Joints with Spline Shaft Accurate Model S-P Model
MIYOSHI KIKAI
[Features]
·You can freely cut any part of the joint with a hexagonal shaft and the intermediate shaft.
·The amount of expansion and contraction is large and the mounting range is wide.From: ฿ 6,759.05 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Wheel attached type spline wheel attached joint strong type B-P type
MIYOSHI KIKAI
[Features]
·Joints with hexagonal shafts and intermediate shafts can be cut freely
·Expansion / contraction range is large for broad range of installations.From: ฿ 4,805.18 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model
MIYOSHI KIKAI
[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SCM415.From: ฿ 5,450.40 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shaft attached type Joint with spline shaft Bearing type K-P model
MIYOSHI KIKAI
Miyoshi Kikai universal joint shaft type spline shaft joint bearing type KP type.From: ฿ 14,327.32 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Joint Power Type With Spline Shaft B-PS Series
MIYOSHI KIKAI
[Features]
· Comprising of 2 standard joints and a join slide (SPS and SPA).
· In the case of the standard product, since the joint and the join slide are not set up on delivery, once the overall length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
· When setting, ensure symmetry of left/right joint assembly.
· Note that if set incorrectly, the output shaft speed will become unevenFrom: ฿ 15,386.40 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shaft Type, Bearing Type, KL Type, KF Type, KFD Type
MIYOSHI KIKAI
[Features]·Universal joint for light torque and high speed. ·Flange is not included.From: ฿ 6,571.67 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Flexible Shaft Compact Design SF Type (Flexible Shaft)
SHOWA SPRING
The flexible shaft is a power transmission shaft that can "Flexibly" perform positional relationship between the drive side and the driven side.
[Features]
· Simple structure with no protective sleeve and metal fittings attached only to both ends of the core (spring part).
· Suitable for shorter distance power transmission.
· Low cost because the components have metal fittings only at both ends.
· Small and compact design is workable.
· Supports handling of high torque for shorter distances.From: ฿ 1,018.23 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Single, Needle Roller, Bore 20mm, 82mm Length
RS Pro
Specifications
Number of Joints = Single
Joint Type = Needle Roller
Hub Type = Bored Hub
Bore = 20mm
Hub Outer Diameter = 42mm
Overall Length = 82mm
Maximum Working Angle = 45°
Peak Torque = 200Nm
Material = Steel
Maximum Speed = 4000rpmFrom: ฿ 5,874.77 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Single, Needle Roller, Bore 22mm, 95mm Length
RS Pro
Specifications
Number of Joints = Single
Joint Type = Needle Roller
Hub Type = Bored Hub
Bore = 22mm
Hub Outer Diameter = 45mm
Overall Length = 95mm
Maximum Working Angle = 45°
Peak Torque = 200Nm
Material = Steel
Maximum Speed = 4000rpmFrom: ฿ 6,416.77 Special Price Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type, Precision Type H Series
MIYOSHI KIKAI
[Features]
· Use boots and oil packs to extend the lifespan of the joint.
· Specify whether the JIS key is new or old one when the shaft shape is B or T.
· With keyway processing, the spring pins are not includedFrom: ฿ 1,731.62 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard type, corrosion resistant type, MS type and MSS type
MIYOSHI KIKAI
MS series is made of SUS304, MSS series is made of SUS 316. Excellent corrosion and heat resistance.From: ฿ 2,341.99 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type, Non Magnetic Corrosion Resistant Type - BR Type
MIYOSHI KIKAI
This product is non-magnetic and has excellent corrosion resistance. [Materials]·Bronze BC6.From: ฿ 2,240.90 Days to Ship:
16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Miniature Model, M Model
MIYOSHI KIKAI
High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.From: ฿ 1,428.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Miniature Model MM Model
MIYOSHI KIKAI
High precision for ultra-small diameter use. 3 types of material available: SK-4 with nitriding composite treatment, SUS304 & SUS316.From: ฿ 2,052.78 Days to Ship:
16 Day(s)
16 Day(s)
-
You can add up to 6 items per a category to the compare list.
MIYOSHI KIKAI
GXS (hexagonal polished shaft) material: S-45C. GXA/GXO (hexagonal sleeve) material: STKM-13.
[Features]
· The hex sleeve and shaft can be cut at any position.
· It cannot be used where there is sliding activity during rotation.
· When using as a sliding unit, the NX sliding unit should also be considered.From: ฿ 853.82 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Joint Boots S Series (Re-Oiling Maintenance)
MIYOSHI KIKAI
Use for dust prevention, oil splash prevention etc.From: ฿ 385.69 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Oil Pack (Re-Oiling Maintenance)
MIYOSHI KIKAI
Oil pack for universal joint maintenance. A set of oil and oil impregnating pad.From: ฿ 935.31 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MIYOSHI KIKAI
[Features]
· Use for push-pull power transmission mechanisms in horizontal and vertical directions.
· Unichrome plated finish.
· Pins and washers are incorporated into the Type-Y.From: ฿ 360.79 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
MIYOSHI KIKAI
Can be used in push-pull power transmission mechanism in horizontal and vertical directions. Has a bright chrome plating finish.From: ฿ 307.20 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shaft type spline, shaft joint, precise type H-P
MIYOSHI KIKAI
Please refer to P.6 "Requests for Ordering" in the catalog before placing an order. Please refer to "Joint Boots" on pages 24-25 of the catalog.From: ฿ 6,318.79 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Shaft type spline, shaft type joint, stainless type HS-P
MIYOSHI KIKAI
[Features]·Rotation and sliding can be transmitted simultaneously. [Materials]·SUS304.From: ฿ 12,234.52 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
![Universal Joint Coupling - Clamping Type - [SCJA]](//th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_b$)
Universal Joint Coupling - Clamping Type - [SCJA]
SUNGIL
Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection.From: ฿ 1,113.70 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…10mm
・Length…45mm
・Torque…29.4NmFrom: ฿ 1,409.05 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…12mm
・Length…51mm
・Torque…44.1NmFrom: ฿ 1,832.34 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…14mm
・Length…61mm
・Torque…69NmFrom: ฿ 2,558.44 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
ESCO
【Product Specifications】
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…20mm
・Length…87mm
・Torque…180NmFrom: ฿ 3,801.34 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Universal Double Joint EA966CJ-6
ESCO
【Product Specifications】
・Double function type of EA966CH-6 to -25
・As the product does not need a middle shaft, it can be installed in a narrower area.
・For power transmission of conveyors, industrial machines, etc.
・Material-Steel
・ID…6mm
・Length…55mm
・Torque…7.8NmFrom: ฿ 2,013.22 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024RS PRO Universal Joint, Double, Needle Roller, Bore 16mm, 104mm Length
RS Pro
Specifications
Number of Joints = Double
Joint Type = Needle Roller
Hub Type = Bored Hub
Bore = 16mm
Hub Outer Diameter = 32mm
Overall Length = 104mm
Maximum Working Angle = 90°
Peak Torque = 200Nm
Material = Steel
Maximum Speed = 4000rpmFrom: ฿ 10,452.45 Special Price Days to Ship:
7 Day(s)
7 Day(s)
![Encoder type coupling - set screw type- [SFC]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_b$)
![Universal Joint Coupling -Set Screw Type- [SCJ]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_b$)
![Universal Joint Coupling - Clamping Type - [SCJA]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Shaft Bore Dia. (machined) D1(Ø) |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Features |
| Application |
| Type |
| Max. Rotational Speed Range(r/min) |
| Body Material |
| Allowable Torque(N•m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Encoder type coupling - set screw type- [SFC]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Universal Joint Coupling -Set Screw Type- [SCJ]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.          | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![Universal Joint Coupling - Clamping Type - [SCJA]](http://th.misumi-ec.com/en/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | |
| Brand | MISUMI | MISUMI | MIYOSHI KIKAI | SUNGIL | MIYOSHI KIKAI | MIYOSHI KIKAI | MIKI PULLEY | MIYOSHI KIKAI | SUNGIL | MIYOSHI KIKAI | MIYOSHI KIKAI | SUNGIL | SAKAI MANUFACTURING | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIGHTY | SUNGIL | MIYOSHI KIKAI | MIGHTY | RS Pro | RS Pro | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIGHTY | SUNGIL | ESCO | RS Pro | RS Pro | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | SHOWA SPRING | RS Pro | RS Pro | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | SUNGIL | ESCO | ESCO | ESCO | ESCO | ESCO | RS Pro |
| Product Series | Type with shaft, joint with hexagonal shaft, precision type, H-GX type | Standard Type Corrosion Resistant HS Series/BS Series/HSS Series | RS PRO Universal Joint, Single, Plain, Bore 25mm, 108mm Length | RS PRO Universal Joint, Double, Plain, Bore 22mm, 145mm Length | RS PRO Universal Joint, Single, Plain, Bore 10mm, 48mm Length | Type with shaft, joint with hexagonal shaft, precision type, S-GX type | With Shaft Model Joints with Spline Shaft Accurate Model S-P Model | Wheel attached type spline wheel attached joint strong type B-P type | With Shaft Model Joints with Spline Shaft Abrasion Resistant Model HJ-P Model | Shaft attached type Joint with spline shaft Bearing type K-P model | RS PRO Universal Joint, Single, Needle Roller, Bore 20mm, 82mm Length | RS PRO Universal Joint, Single, Needle Roller, Bore 22mm, 95mm Length | Standard type, corrosion resistant type, MS type and MSS type | Standard Type, Non Magnetic Corrosion Resistant Type - BR Type | RS PRO Universal Joint, Double, Needle Roller, Bore 16mm, 104mm Length | ||||||||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 129.00 Special Price On Sale Until 31/03/2025 | ฿ 129.00 Special Price On Sale Until 31/03/2025 | ฿ 1,297.43 | ฿ 570.50 | ฿ 826.25 | ฿ 6,088.76 | ฿ 1,508.58 Special Price On Sale Until 31/03/2025 | ฿ 2,346.88 | ฿ 1,277.12 Special Price On Sale Until 31/03/2025 | ฿ 2,346.72 | ฿ 8,066.73 | ฿ 570.50 | ฿ 1,412.14 Special Price On Sale Until 31/03/2025 | ฿ 1,015.51 | ฿ 1,776.39 | ฿ 802.35 | ฿ 5,989.29 | ฿ 494.24 | ฿ 1,032.06 Special Price On Sale Until 31/03/2025 | ฿ 3,479.61 | ฿ 1,441.98 | ฿ 6,694.55 Special Price On Sale Until 30/06/2024 | ฿ 4,077.10 Special Price On Sale Until 30/06/2024 | ฿ 1,915.57 | ฿ 10,974.94 | ฿ 15,065.35 | ฿ 2,131.39 | ฿ 1,032.06 | ฿ 1,086.39 | ฿ 5,506.10 Special Price On Sale Until 30/06/2024 | ฿ 2,421.03 Special Price On Sale Until 30/06/2024 | ฿ 1,950.23 | ฿ 4,339.83 Special Price On Sale Until 31/03/2025 | ฿ 4,283.27 | ฿ 370.84 | ฿ 349.10 | ฿ 9,517.15 | ฿ 6,759.05 | ฿ 4,805.18 | ฿ 5,450.40 | ฿ 14,327.32 | ฿ 15,386.40 | ฿ 6,571.67 | ฿ 1,018.23 | ฿ 5,874.77 Special Price On Sale Until 30/06/2024 | ฿ 6,416.77 Special Price On Sale Until 30/06/2024 | ฿ 1,731.62 | ฿ 2,341.99 | ฿ 2,240.90 | ฿ 1,428.00 | ฿ 2,052.78 | ฿ 853.82 | ฿ 385.69 | ฿ 935.31 | ฿ 360.79 | ฿ 307.20 | ฿ 6,318.79 | ฿ 12,234.52 | ฿ 1,113.70 | ฿ 1,409.05 | ฿ 1,832.34 | ฿ 2,558.44 | ฿ 3,801.34 | ฿ 2,013.22 | ฿ 10,452.45 Special Price On Sale Until 30/06/2024 |
| Days to Ship | Same day | Same day | Same day | Same day | 6 Day(s) | 9 Day(s) | Same day | 6 Day(s) | Same day | 6 Day(s) | 9 Day(s) | Same day | Same day | 3 Day(s) | 3 Day(s) | 3 Day(s) | 6 Day(s) | 3 Day(s) | Same day | 6 Day(s) | 3 Day(s) | 7 Day(s) | 7 Day(s) | 6 Day(s) | 6 Day(s) | 9 Day(s) | 7 Day(s) | 7 Day(s) | 6 Day(s) | 7 Day(s) | 7 Day(s) | 3 Day(s) | Same day | 6 Day(s) | 6 Day(s) | 3 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 9 Day(s) | 10 Day(s) | 5 Day(s) | 7 Day(s) | 7 Day(s) | 3 Day(s) | 3 Day(s) | 16 Day(s) | 6 Day(s) | 16 Day(s) | Same day | 6 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 9 Day(s) | 9 Day(s) | 7 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 7 Day(s) |
| Shaft Bore Dia. (machined) D1(Ø) | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 4 ～ 16 | 5 ～ 38 | 6 ～ 30 | 3 ～ 22 | 6 ～ 25 | 3 ～ 15 | 6 ～ 30 | 6 ～ 30 | 4 ～ 16 | 3 ～ 20 | 6 ～ 60 | 6 ～ 60 | 3 ～ 10 | 6 ～ 30 | 3 ～ 10 | 3 ～ 15 | 6 ～ 30 | 2 ～ 10 | - | - | 6 ～ 60 | 10 ～ 30 | 10 ～ 30 | 8 ～ 20 | 3 ～ 15 | - | - | - | 6 ～ 60 | 6 ～ 60 | 10 ～ 30 | 11 ～ 122 | 12 ～ 44 | 8 ～ 30 | 6 ～ 30 | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 20 ～ 60 | - | - | - | - | 6 ～ 30 | 2 ～ 5.5 | 6 | 2 ～ 5.5 | 1 ～ 1.5 | 6 ～ 30 | 15 ～ 115 | - | - | - | 6 ～ 30 | 6 ～ 20 | 3 ～ 15 | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | 20.01~50.00 ～ 50.01~100.00 | 5.01~10.00 ～ 100 < 500 | - | 1.01~3.00 | - | - | 0.05~1.00 ～ 20.01~50.00 | - | 0.05~1.00 ～ 3.01~5.00 | - | - | 1.01~3.00 | 0.05~1.00 ～ 10.01~20.00 | - | - | - | - | 0.05~1.00 ～ 1.01~3.00 | 0.05~1.00 ～ 3.01~5.00 | - | 0.05~1.00 ～ 1.01~3.00 | - | - | - | - | - | 1.01~3.00 ～ 10.01~20.00 | 0.05~1.00 ～ 3.01~5.00 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.05~1.00 ～ 1.01~3.00 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.05~1.00 ～ 3.01~5.00 | - | - | - | - | - | - |
| Shaft Bore Dia. (machined) D2(Ø) | - | - | - | 4 ～ 16 | - | - | 3 ～ 22 | - | 3 ～ 15 | - | - | 4 ～ 16 | 3 ～ 20 | - | - | - | - | 3 ～ 10 | 3 ～ 15 | - | 2 ～ 10 | - | - | - | - | - | 8 ～ 20 | 3 ～ 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 15 | - | - | - | - | - | - |
| Outer Dia. A(Ø) | 19 ～ 36 | 12 ～ 51 | 12 ～ 51 | 29 ～ 54 | 5 ～ 35 | 12 ～ 60 | 19 ～ 46 | 6 ～ 22 | 15 ～ 40 | 12 ～ 51 | 12.5 ～ 57 | 29 ～ 54 | 15 ～ 55 | 12 ～ 120 | 12.5 ～ 120 | 8 ～ 19 | 12 ～ 51 | 7.1 ～ 17.5 | 15 ～ 40 | 12.5 ～ 60 | 7.1 ～ 17.5 | - | - | 12 ～ 120 | 20 ～ 60 | 20 ～ 60 | 23 ～ 36.5 | 15 ～ 40 | - | - | - | 16 ～ 115 | 16 ～ 115 | 20 ～ 60 | 22 ～ 177 | 23 ～ 72 | 18 ～ 58 | 16 ～ 58 | 12 ～ 60 | 12 ～ 51 | 20 ～ 60 | 40 ～ 120 | 36 ～ 118 | - | - | - | 12.5 ～ 57 | 6 ～ 10 | 16 | 6 ～ 10 | 2 ～ 3 | 11 ～ 54 | 28 ～ 135 | - | - | 8 ～ 48 | 12.5 ～ 57 | 12.5 ～ 40 | 15 ～ 40 | - | - | - | - | - | - |
| Overall Length W(mm) | 42 ～ 139 | 31 ～ 139 | 31 ～ 122 | 28 ～ 58 | - | 162~270 ～ 553~711 | 19.4 ～ 54 | - | 24.2 ～ 51 | 49.5 ～ 195 | 131~250 ～ 517~685 | 28 ～ 58 | 18 ～ 58 | 50 ～ 300 | 40 ～ 300 | 24 ～ 42 | 105~232 ～ 399~599 | 19.1 ～ 75.5 | 22.4 ～ 51 | 65 ～ 275 | 27.2 ～ 89.8 | - | - | 75 ～ 485 | 96 ～ 275 | 194~309 ～ 546~711 | 62 ～ 86 | 22.4 ～ 45.6 | - | - | - | 34 ～ 220 | 50 ～ 340 | 62 ～ 178 | 50 ～ 300 | 21 ～ 60 | 132~245 ～ 397~599 | 136.5~244 ～ 444~1095 | 168.5~266.5 ～ 556~1185 | 130.5~238 ～ 444~1094 | 219~450 ～ 556~1188.5 | 324~806 ～ 760~1312 | 72 ～ 326 | 150 ～ 300 | - | - | 40 ～ 165 | 15 ～ 30 | 40 | 15 ～ 30 | 9 ～ 12 | - | 34 ～ 220 | - | 20 ～ 100 | 16 ～ 96 | 148.5~252 ～ 530~1164 | 148.5~252 ～ 335~842 | 22.4 ～ 45.6 | - | - | - | - | - | - |
| Features | - | - | - | - | - | High Torque | High Accuracy ～ Small | - | Heat Resistant ～ Small | - | High Accuracy ～ High Durability | - | High Torsional Rigidity ～ Low Moment of Inertia | High Torque | - | - | - | High Accuracy ～ No Backlash | Heat Resistant ～ Small | - | High Accuracy ～ No Backlash | - | - | High Torque | - | - | High Accuracy ～ Small | Heat Resistant ～ Small | - | - | - | High Accuracy ～ Small | High Accuracy ～ Small | - | - | - | High Accuracy ～ Small | High Accuracy ～ Small | High Torque | - | - | High Torque | - | - | - | - | High Accuracy ～ High Durability | - | - | Small | Small | - | - | - | - | - | High Accuracy ～ High Durability | - | - | - | - | - | - | - | - |
| Application | Standard | Standard | Standard | - | Standard | Standard | Standard / Servo Motor / Stepping Motor | Standard | Servo Motor | Standard | Standard | - | Standard / Servo Motor / Stepping Motor / Encoder | Standard | Standard | Standard | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Servo Motor | Standard | Standard / Servo Motor / Stepping Motor / Encoder | - | - | Standard | Standard | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Servo Motor | - | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - |
| Type | Others / Standard Type | Others / Standard Type | Standard Type | - | Shaft Type | Shaft Type | Standard Type | Shaft Type | Standard Type | Standard Type | Shaft Type | - | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Standard Type | Standard Type | Standard Type | Standard Type | - | - | Standard Type | Standard Type | Shaft Type | Standard Type | Standard Type | - | - | - | Standard Type | Standard Type | Standard Type | Maintenance Components | Maintenance Components | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Flexible Type | - | - | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Maintenance Components | Maintenance Components | Maintenance Components | Maintenance Components | Shaft Type | Shaft Type | - | - | - | - | - | - | - |
| Max. Rotational Speed Range(r/min) | - | - | 301~1000 ～ 1001~2000 | 2001~4000 | - | - | 2001~4000 ～ 4001~10000 | - | 2001~4000 ～ 10001~78000 | 301~1000 ～ 1001~2000 | - | 2001~4000 | 4001~10000 | 100~ 300 ～ 1001~2000 | < 100 ～ 301~1000 | - | - | 4001~10000 | 2001~4000 ～ 10001~78000 | 100~ 300 ～ 301~1000 | 4001~10000 | - | - | 100~ 300 ～ 1001~2000 | 301~1000 ～ 2001~4000 | - | - | 2001~4000 ～ 10001~78000 | - | - | - | 100~ 300 ～ 2001~4000 | 100~ 300 ～ 1001~2000 | 301~1000 ～ 2001~4000 | - | - | - | - | - | - | - | - | - | - | - | - | 301~1000 ～ 1001~2000 | 100~ 300 ～ 301~1000 | - | 301~1000 | - | - | - | - | - | - | - | - | 2001~4000 ～ 4001~10000 | - | - | - | - | - | - |
| Body Material | Steel | Steel | Steel | Steel | Steel | Steel | Aluminum | Stainless Steel | Aluminum ～ Aluminum Alloy | Steel | Steel | Steel | Aluminum | Steel | Stainless Steel | Steel | Steel | Plastic | Aluminum ～ Aluminum Alloy | Stainless Steel | Plastic | - | - | Steel | Steel | Steel | Plastic | Aluminum ～ Aluminum Alloy | - | - | - | Steel | Steel | Steel | Plastic | Plastic | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | - | - | Steel | Stainless Steel | Alloy | Steel | Stainless Steel ～ Steel | Steel | Plastic | - | Steel | Steel | Steel | Stainless Steel | Aluminum Alloy | - | - | - | - | - | - |
| Allowable Torque(N•m) | 20.1 ～ 175 | 5.3 ～ 495 | - | 0.12 ～ 1.5 | - | - | 0.4 ～ 25 | - | 0.25 ～ 5 | - | - | 0.12 ～ 1.5 | 0.25 ～ 20 | - | - | - | - | 0.08 ～ 1.6 | 0.25 ～ 5 | - | 0.08 ～ 1.6 | - | - | - | - | - | 2.8 ～ 10.7 | 0.25 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.392 ～ 1.862 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 ～ 5 | - | - | - | - | - | - |
| Max. Rotational Speed(r/min) | - | - | 500 ～ 1800 | 3000 | - | - | 3000 ～ 6000 | - | 3500 ～ 18000 | 380 ～ 1400 | - | 3000 | 6000 | 220 ～ 1700 | 90 ～ 800 | - | - | 10000 | 3500 ～ 21000 | 150 ～ 640 | 10000 | - | - | 160 ～ 1300 | 730 ～ 2200 | - | - | 4000 ～ 21000 | - | - | - | 280 ～ 2100 | 200 ～ 1500 | 950 ～ 2500 | - | - | - | - | - | - | - | - | - | - | - | - | 510 ～ 2000 | 300 ～ 600 | - | 700 ～ 1000 | - | - | - | - | - | - | - | - | 4000 ～ 6000 | - | - | - | - | - | - |
| Allowable Lateral Misalignment Range(mm) | - | - | - | 1.1~3.0 | - | - | 0.02~0.2 ～ 0.41~1.0 | - | 0.21~0.40 | - | - | 1.1~3.0 | 0.02~0.2 | - | - | - | - | 5.1~100 | 0.21~0.40 ～ 0.41~1.0 | - | 5.1~100 | - | - | - | - | - | - | 0.21~0.40 ～ 0.41~1.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.21~0.40 ～ 0.41~1.0 | - | - | - | - | - | - |
| Allowable Lateral Misalignment(mm) | - | - | - | 2 ～ 3 | - | - | 0.2 ～ 0.5 | - | 0.3 ～ 0.5 | - | - | 2 ～ 3 | 0.2 | - | - | - | - | 5.6 ～ 15.5 | 0.3 ～ 0.5 | - | 5.6 ～ 15.5 | - | - | - | - | - | - | 0.3 ～ 0.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.3 ～ 0.5 | - | - | - | - | - | - |
| Allowable Angular Misalignment(deg) | - | - | - | 10 ～ 12 | - | - | 1 ～ 4 | - | 7 | - | - | 10 ～ 12 | 1 | - | - | - | - | 45 ～ 90 | 3 ～ 7 | - | 45 ～ 90 | - | - | - | - | - | 40 | 3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 | - | - | - | - | - | - |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?