(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
An angle gauge convenient for measuring the tilt angle of machine tools and structures.
[Features]
· Can be used as 2-axis angle sensor assembled to devices.
· Inclination angles in X and Y directions are output at the same time.
· When power is supplied externally, the X/Y inclination angle is output through RS-232C signal. (Power supply and output connected via terminal block)
· With dedicated software that enables display and storage of measured values on the computer.
· Measurement Range: ±9.998°, Measuring Repeatability: ±0.01°
[Applications]
· The product may be secured on machine tools, construction equipment or structures to measure inclination angles, or used as a control sensor.
Product Type | Digital Goniometer | Minimum Display(°) | 0.002 | Accuracy(°) | ±0.01 (if within ±2 of measurement range), ±0.05 (if exceeding ±2 of measurement range) |
---|---|---|---|---|---|
Product Dimension(mm) | L105×W75×H53 | Material | Case: Aluminum | Measurement Range Details | ±9.998° |
Power Supply | 9-15 VDC (Consumption current approx. 70 mA) | Operating Temperature Range(°C) | 0–40 | Repeatability | ±0.01 |
Use | The product may be secured on machine tools, construction equipment or structures to measure inclination angles or used as a control sensor. | Mass(g) | 270 | XY Orthogonal accuracy | 1% |
Response time (measurement period) | Approx. 2.5 s/Time | External output signal | RS-232C Compliant | Features | · Inclination angles in X and Y directions are output simultaneously. · X and Y inclination angles are output via a RS-232C signal when power is supplied externally. (Power supply and output are connected via terminal block) · Supplied with a special software that facilitates display and recording of measurement values on computers. |
Please check the type/dimensions/specifications of the part DP-10M in the Digital Angle Sensor series.
How can we improve?
How can we improve?