TeSys K Contactor
Brand :
Schneider Electric
Caution
Product Description
TeSys K contactor - 3P - AC-3 <= 440 V 6 A - 1 NC aux. - 24 V AC coil
| Product Code | Product or component type | Product certifications | Sustainable offer status | EU RoHS Directive | Mercury free | RoHS exemption information | China RoHS Regulation | Environmental Disclosure | Circularity Profile | WEEE | Operating altitude | REACH Regulation | REACH free of SVHC | Warranty | Utilisation category | [Uc] control circuit voltage | Range | [Ith] conventional free air thermal current | Overvoltage category | Poles description | Maximum operating rate | Protective treatment | Product name | Flame retardance | Device application | Irms rated making capacity | Contactor application | Power pole contact composition | Control circuit type | Rated breaking capacity | Associated fuse rating | Average impedance | Control circuit voltage limits | Operating time | Inrush power in VA | Hold-in power consumption in VA | Heat dissipation | Mechanical robustness | Safety reliability level | Signalling circuit frequency | Motor power kW | Minimum switching current | Auxiliary contact composition | Minimum switching voltage | Insulation resistance | [Ie] rated operational current | Auxiliary contacts type | Non overlap distance | Device short name | Electrical durability | Mechanical durability | Depth | IP degree of protection | Standards | Ambient air temperature for storage | Tightening torque | [Ue] rated operational voltage | [Ui] rated insulation voltage | Connections - terminals | [Uimp] rated impulse withstand voltage | Mounting support | Height | Net weight | [Icw] rated short-time withstand current | Width |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LC1K0601B7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-4 AC-3 | 24 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 1.5 kW at 220...230 V AC 50/60 Hz AC-3 2.2 kW at 380...415 V AC 50/60 Hz AC-3 3 kW at 440 V AC 50/60 Hz AC-3 3 kW at 480 V AC 50/60 Hz AC-3 3 kW at 500...600 V AC 50/60 Hz AC-3 3 kW at 660...690 V AC 50/60 Hz AC-3 1.5 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NC | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 6 A at <= 440 V AC AC-3 for power circuit | Type instantaneous 1 NC | 0.5 mm | LC1K | 1.3 Mcycles 6 A AC-3 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz Signalling circuit: <= 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-5-1 Signalling circuit: 600 V conforming to UL 508 Power circuit: 600 V conforming to CSA C22.2 No 14 Signalling circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Plate Rail | 58 mm | 0.18 kg | 90 A 50 ℃ - 1 s for power circuit 85 A 50 ℃ - 5 s for power circuit 80 A 50 ℃ - 10 s for power circuit 60 A 50 ℃ - 30 s for power circuit 45 A 50 ℃ - 1 min for power circuit 40 A 50 ℃ - 3 min for power circuit 20 A 50 ℃ - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit | 45 mm |
| LC1K0610B7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-4 AC-3 | 24 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 1.5 kW at 220...230 V AC 50/60 Hz AC-3 2.2 kW at 380...415 V AC 50/60 Hz AC-3 3 kW at 440 V AC 50/60 Hz AC-3 3 kW at 480 V AC 50/60 Hz AC-3 3 kW at 500...600 V AC 50/60 Hz AC-3 3 kW at 660...690 V AC 50/60 Hz AC-3 1.5 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 6 A at <= 440 V AC AC-3 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | 1.3 Mcycles 6 A AC-3 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz Signalling circuit: <= 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-5-1 Signalling circuit: 600 V conforming to UL 508 Power circuit: 600 V conforming to CSA C22.2 No 14 Signalling circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Rail Plate | 58 mm | 0.18 kg | 90 A 50 ℃ - 1 s for power circuit 85 A 50 ℃ - 5 s for power circuit 80 A 50 ℃ - 10 s for power circuit 60 A 50 ℃ - 30 s for power circuit 45 A 50 ℃ - 1 min for power circuit 40 A 50 ℃ - 3 min for power circuit 20 A 50 ℃ - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit | 45 mm |
| LC1K0610E7 | Contactor | CSA UL | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-3 AC-4 | 48 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 1.5 kW at 220...230 V AC 50/60 Hz AC-3 2.2 kW at 380...415 V AC 50/60 Hz AC-3 3 kW at 440 V AC 50/60 Hz AC-3 3 kW at 480 V AC 50/60 Hz AC-3 3 kW at 500...600 V AC 50/60 Hz AC-3 3 kW at 660...690 V AC 50/60 Hz AC-3 1.5 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 6 A at <= 440 V AC AC-3 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | 1.3 Mcycles 6 A AC-3 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz Signalling circuit: <= 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-5-1 Signalling circuit: 600 V conforming to UL 508 Power circuit: 600 V conforming to CSA C22.2 No 14 Signalling circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Rail Plate | 58 mm | 0.18 kg | 90 A 50 ℃ - 1 s for power circuit 85 A 50 ℃ - 5 s for power circuit 80 A 50 ℃ - 10 s for power circuit 60 A 50 ℃ - 30 s for power circuit 45 A 50 ℃ - 1 min for power circuit 40 A 50 ℃ - 3 min for power circuit 20 A 50 ℃ - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit | 45 mm |
| LC1K0610M7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-3 AC-4 | 220...230 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 1.5 kW at 220...230 V AC 50/60 Hz AC-3 2.2 kW at 380...415 V AC 50/60 Hz AC-3 3 kW at 440 V AC 50/60 Hz AC-3 3 kW at 480 V AC 50/60 Hz AC-3 3 kW at 500...600 V AC 50/60 Hz AC-3 3 kW at 660...690 V AC 50/60 Hz AC-3 1.5 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 6 A at <= 440 V AC AC-3 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | 1.3 Mcycles 6 A AC-3 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz Signalling circuit: <= 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-5-1 Signalling circuit: 600 V conforming to UL 508 Power circuit: 600 V conforming to CSA C22.2 No 14 Signalling circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Rail Plate | 58 mm | 0.18 kg | 90 A 50 ℃ - 1 s for power circuit 85 A 50 ℃ - 5 s for power circuit 80 A 50 ℃ - 10 s for power circuit 60 A 50 ℃ - 30 s for power circuit 45 A 50 ℃ - 1 min for power circuit 40 A 50 ℃ - 3 min for power circuit 20 A 50 ℃ - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit | 45 mm |
| LC1K09008M7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-1 | 220...230 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit | III | 4P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 | Resistive load | 2 NO + 2 NC | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing 15...25 ms coil de-energisation and NC closing 5...15 ms coil energisation and NC opening | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | - | - | - | - | - | - | - | - | - | 0.18 Mcycles 20 A AC-1 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Power circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Plate Rail | - | - | - | - |
| LC1K0901B7 | Contactor | CSA UL | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-3 AC-4 AC-1 | 24 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Resistive load Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 2.2 kW at 220...230 V AC 50/60 Hz AC-3 4 kW at 380...415 V AC 50/60 Hz AC-3 4 kW at 440 V AC 50/60 Hz AC-3 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NC | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NC | 0.5 mm | LC1K | 0.18 Mcycles 20 A AC-1 at Ue <= 440 V 1.3 Mcycles 9 A AC-3 at Ue <= 440 V | 10 Mcycles | 57 mm | IP2x conforming to VDE 0106 | BS 5424 IEC 60947 NF C 63-110 VDE 0660 | -50 to 80 ℃ | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm | Power circuit: 690 V AC 50/60 Hz Signalling circuit: <= 690 V AC 50/60 Hz | Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-4-1 Signalling circuit: 690 V conforming to IEC 60947-5-1 Signalling circuit: 600 V conforming to UL 508 Power circuit: 600 V conforming to CSA C22.2 No 14 Signalling circuit: 600 V conforming to CSA C22.2 No 14 | Screw clamp terminals 1 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 1 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 1 cable(s) 0.34 to 2.5 mm2flexible with cable end Screw clamp terminals 2 cable(s) 1.5 to 4 mm2solid Screw clamp terminals 2 cable(s) 0.75 to 4 mm2flexible without cable end Screw clamp terminals 2 cable(s) 0.34 to 1.5 mm2flexible with cable end | 8 kV | Plate Rail | 58 mm | 0.18 kg | 90 A 50 ℃ - 1 s for power circuit 85 A 50 ℃ - 5 s for power circuit 80 A 50 ℃ - 10 s for power circuit 60 A 50 ℃ - 30 s for power circuit 45 A 50 ℃ - 1 min for power circuit 40 A 50 ℃ - 3 min for power circuit 20 A 50 ℃ - >= 15 min for power circuit 80 A - 1 s for signalling circuit 90 A - 500 ms for signalling circuit 110 A - 100 ms for signalling circuit | - |
| LC1K0910B7 | Contactor | CSA UL | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-3 AC-1 AC-4 | 24 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control Resistive load | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 2.2 kW at 220...230 V AC 50/60 Hz AC-3 4 kW at 380...415 V AC 50/60 Hz AC-3 4 kW at 440 V AC 50/60 Hz AC-3 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| LC1K0910E7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-1 AC-3 AC-4 | 48 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Resistive load Motor control | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 2.2 kW at 220...230 V AC 50/60 Hz AC-3 4 kW at 380...415 V AC 50/60 Hz AC-3 4 kW at 440 V AC 50/60 Hz AC-3 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| LC1K0910G7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-1 AC-3 AC-4 | 120 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control Resistive load | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 2.2 kW at 220...230 V AC 50/60 Hz AC-3 4 kW at 380...415 V AC 50/60 Hz AC-3 4 kW at 440 V AC 50/60 Hz AC-3 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NO | 0.5 mm | LC1K | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| LC1K0910M7 | Contactor | CSA UL | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-4 AC-3 AC-1 | 220...230 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for power circuit conforming to NF C 63-110 110 A AC for power circuit conforming to IEC 60947 110 A AC for signalling circuit conforming to IEC 60947 | Motor control Resistive load | 3 NO | AC at 50/60 Hz | 110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 2.2 kW at 220...230 V AC 50/60 Hz AC-3 4 kW at 380...415 V AC 50/60 Hz AC-3 4 kW at 440 V AC 50/60 Hz AC-3 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 | 5 mA for signalling circuit | 1 NO | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NO | 0.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| LC1K1201E7 | Contactor | CSA UL | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-3 AC-4 AC-1 | 48 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for signalling circuit conforming to IEC 60947 144 A AC for power circuit conforming to NF C 63-110 144 A AC for power circuit conforming to IEC 60947 | Motor control Resistive load | 3 NO | AC at 50/60 Hz | 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 3 kW at 220...230 V AC 50/60 Hz AC-3 5.5 kW at 380...415 V AC 50/60 Hz AC-3 5.5 kW at 440 V AC 50/60 Hz AC-3 | 5 mA for signalling circuit | 1 NC | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 12 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NC | 0.5 mm | LC1K | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| LC1K1201F7 | Contactor | UL CSA | Green Premium product | Compliant EU RoHS Declaration | Yes | Yes | China RoHS declaration | Product Environmental Profile | End of Life Information | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins | 2000 m without derating | REACH Declaration | Yes | 18 months | AC-4 AC-1 AC-3 | 110 V AC 50/60 Hz | TeSys | 20 A (at 50 ℃) for power circuit 10 A (at 50 ℃) for signalling circuit | III | 3P | 3600 cyc/h | TC conforming to IEC 60068 TC conforming to DIN 50016 | TeSys K | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 | Control | 110 A AC for signalling circuit conforming to IEC 60947 144 A AC for power circuit conforming to NF C 63-110 144 A AC for power circuit conforming to IEC 60947 | Resistive load Motor control | 3 NO | AC at 50/60 Hz | 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 70 A at 660...690 V conforming to IEC 60947 | 25 A gG at <= 440 V for power circuit 25 A aM for power circuit 10 A gG for signalling circuit conforming to IEC 60947 10 A gG for signalling circuit conforming to VDE 0660 | 3 mOhm - Ith 20 A 50 Hz for power circuit | Operational: 0.8...1.15 Uc (at <50 ℃) Drop-out: 0.2...0.75 Uc (at <50 ℃) | 10...20 ms coil de-energisation and NO opening 10...20 ms coil energisation and NO closing | 30 VA (at 20 ℃) | 4.5 VA (at 20 ℃) | 1.3 W | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 | <= 400 Hz | 4 kW at 480 V AC 50/60 Hz AC-3 4 kW at 500...600 V AC 50/60 Hz AC-3 4 kW at 660...690 V AC 50/60 Hz AC-3 2.2 kW at 400 V AC 50/60 Hz AC-4 3 kW at 220...230 V AC 50/60 Hz AC-3 5.5 kW at 380...415 V AC 50/60 Hz AC-3 5.5 kW at 440 V AC 50/60 Hz AC-3 | 5 mA for signalling circuit | 1 NC | 17 V for signalling circuit | > 10 MOhm for signalling circuit | 20 A (at <50 ℃) at <= 440 V AC AC-1 for power circuit 12 A at <= 440 V AC AC-3 for power circuit 16 A (at <70 ℃) at 690 V AC AC-1 for power circuit | Type instantaneous 1 NC | 0.5 mm | LC1K | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |