Timing Belt Conveyor, Dual Track, Head Driver, Pulley Dia. 50mm, Built-in Motor

Brand :
MISUMI

Caution

  • The internal structure dimensions of the CAD model are for structural reference only. Please refer to the actual product.
  • Product Related Ducuments (1) Motor wiring (2) Flat belt specification list (3) Deviation adjustment (4) Conveyor body weight are available. Click here
  • Download Free! >> Economy Series Catalog (TH-EN-FY25) CLICK here

Product Description

[Features]
• Double-row synchronous timing belt with built-in motor reduces footprint for jig tray conveying.
• Belt width B is configurable from 150 to 300 in 10 mm increments; L is configurable from 300 to 3000 in 5mm increments.
• Aluminum profile body supports a lightweight conveyor structure.
[Use]
• Suitable for equipment production, semiconductor, lithium battery, food, electronic and electrical appliance, and robotics applications.

 

Product Overview
 
Economy series conveyor, with a rational structural design and localized production. A variety of models are available to meet customers' design needs for different usage scenarios, providing better options.
E-CVGTD: Double-row synchronous timing belt, built-in motor, reduced footprint, suitable for conveying jig tray products.
 
Dimensional Drawing
 
E-CVGTD
Motor Specification: 25W
 
When L > 2000, 1 set (2 pieces) of belt support rollers is included.
Support Component Notes:
When L ≤ 500, there is 1 set of support components
When L is 505 to 1000, there are 2 sets of support components
When L is 1005 to 1500, there are 3 sets of support components
When L>1500, there are 4 sets of support components
When L ≤ 500, there is no countersunk hole at position F, and 4 nuts are pre-installed on one side inside the aluminum profile slot;
When L>500, a countersunk hole for nut insertion is reserved by default at position F, no additional machining is required.
When selecting a speed control motor, the speed controller is an accessory, not installed on the main unit, and does not come with a mounting bracket.
If you need a bracket for the speed controller, please use additional processing (SCB)


■ Details of A Dimension
Motor PowerMotorReduction RatioA
SpecificationsManufacturer
25WInduction Motor / Variable Speed MotorGPG3 to 18L118
25 to 180L130
Induction MotorJSCC3 to 18L119
25 to 180L130
Variable Speed Motor3 to 18L129
25 to 180L140
Enlarged Profile View (Symmetrical Left and Right)

Standard Nut Fitting Table for Profile Slot: L Value (Center Distance Unit: mm)
L300-999L1000 to 1499L1500 or morePositionSpecificationsConfiguration Type
4PCS6PCS8PCSX Section (Left/Right)M3 (Hexagon)Accessories
4PCS6PCS8PCSY Section (Left/Right)M6 (Square)Accessories
 
 
Material Table

Part NameMaterialSurface Treatment
FrameAluminumElectro Plating
Motor Cover PlateAluminumBaked Paint
Pulley HousingAluminumBaked Paint

Specifications Overview

■ Flat Belt Width - Pulley Center Distance Correspondence Table
Part numberBelt Width
B
Pulley Center Distance L
L300 to 500L505 to 600L605 to 800L805 to 900L905 to 1000L1005 to 3000
E-CVGTD150●●●●●●
160 to 200●●●●●●
210 to 250●●●●●●
260 to 300●●●●●●

Alterations

AlterationPart Number-B-L-Motor Selection-Belt Specifications-Motor Manufacturer Selection-Alterations
     
Output Power-Specifications-Gear Head Reduction Ratio
 E-CVGTD-200-1000-25-SCM-25-H-G-SCB
 
AlterationsCodeSpec
Mounting Bracket for Speed Controller
MISUMI Belt Conveyor Speed Controller Bracket Additional Machining
SCBIncludes mounting bracket for speed controller.
Ordering Code SCB
 
Specification Table
 
Please order after selecting part number and parameters according to the selection steps  to .
Part Number-B-L-Motor Selection-Belt Specifications-Motor Manufacturer Selection
     
Output Power-Specifications-Gear Head Reduction Ratio
 
Without belt
Without motor or gear head
E-CVGTD
E-CVGTD
E-CVGTD
-
-
-
200
200
200
-
-
-
1000
1000
1000
-
-
-
25
25
25
-
-
-
SCM
INV
NM
-
-
-
25
30
NH
-
-
-
H
J
H
-
-
-
G
G
R

■Specification Table
Part NumberShapeModel Features
E-CVGTDMedium Load Side Guide TypeTooth surface fabric for noise reduction, supports precision positioning and conveying
 
Part NumberB
can be specified down to 10 mm increments
L
Can be specified down to 5mm increments
Motor SelectionBelt Specifications
(Material is generally PU)
Motor
Output Power (W)SpecificationsGear Head Reduction Ratio
E-CVGTD150 to 300300 to 3000
(2440)
25SCM
(Single-phase 220V Variable Speed Motor)
5 7.5 10 12.5 15 18 
25 30 36 50 60 75 
90 100 120 150 180
H(General-purpose · White toothed surface tape)
S(For sliding · Green double-sided tape)
D(Antistatic · Black double-sided tape)
J(No belt)
G(GPG Motor)

J(JSCC Motor)
INV
(Three-Phase 220V Induction Motor)
NM(No Motor)NH(No Gear Head)R(No Motor · Gear Head)
When selecting without a motor and gear head, the motor mounting hole pitch will vary depending on the motor output power.
If you need to use a stepper motor or servo motor for automatic control, you can choose the model without a motor and gear head.
When selecting without motor and gear head, the main unit will be delivered as parts. Please assemble by following the assembly instructions included in the same package.
For belts other than those listed above, please refer to the specification overview. Click here.
When the selected size L  exceeds  (  ) value, confirmation of shipping days may be required prior to placing an order or requesting a quotation due to transportation constraints.

 
■ Conveying Capacity
MISUMI Belt Conveyor Load Capacity
The chart shows the transport capacity under horizontal conditions.
Carrying capacity may vary depending on usage conditions.
When selecting a speed control motor, the transport capacity does not increase as the speed decreases.
■ Gear Head Reduction Ratio - Speed Correspondence Table
May decrease depending on load conditions*Reference value
Gear Head Reduction RatioTiming Belt Speed (m/min)
SCM Speed Control TypeINV Inverter Type
529.0 to 48.360.1
7.519.3 to 32.240.1
1014.5 to 24.230.1
12.511.6 to 19.324.1
159.7 to 16.120.0
188.1 to 13.416.7
255.8 to 9.712.0
304.8 to 8.110.0
364.0 to 6.78.4
502.9 to 4.86.0
602.4 to 4.05.0
751.9 to 3.24.0
901.6 to 2.73.3
1001.4 to 2.43.0
1201.2 to 2.02.5
1501.0 to 1.62.0
1800.8 to 1.31.7
 
Product Features
 
Feature 1: Simplifies belt replacement steps and improves maintainability.
Feature 2: The conveyor body is made of aluminum profiles, achieving an overall lightweight design.
Feature 3: Double-row narrow-width toothed belt, suitable for conveying jig tray products, supports precise positioning and conveying.
Feature 4: The timing belt center distance can be specified in 10 mm increments, and the pulley spacing can be specified in 5 mm increments.
 
Precautions
 
(1) When installing onto equipment, ensure the flatness of the aluminum profile.
(2) Do not disassemble or modify the conveyor by yourself to avoid performance issues.
(3) Due to different conveyor usage environments, MISUMI conveyors do not come with a power supply, cables, or switches.
(4) In applications, due to issues with machine structure strength and body deformation, please do not exceed the allowable load and length/width when selecting models.
(5) Even when the motor is operating normally, its surface temperature may sometimes exceed 70°C . Be sure to take precautions to avoid burns.
(6) If operated in the opposite direction to the standard running direction, abnormal conditions such as belt misalignment, belt damage, noise, or jamming may occur. Please avoid use. (The standard shipping direction is as shown below)
MISUMI Belt Conveyor Standard Transport Direction
 
Application Industries
 
Equipment Production Semiconductor Lithium battery
MISUMI belt conveyor for smartphone production smartphone MISUMI conveyor equipment transports semiconductor products chip MISUMI conveyor equipment for lithium battery production battery
Food Electronic & Electrical Appliances Robotics
MISUMI belt conveyors for food production MISUMI belt conveyors for electronic and electrical product manufacturing MISUMI Belt Conveyor with Robot Arm Integration
 
Related Products
 
Economy Conveyor Synchronous Timing Belt Double-Row Head Drive
Pulley Diameter 50 mm
 Economy Conveyor Synchronous Timing Belt Double Row Head Drive
Pulley Diameter 70 mm Built-in Motor
 Economy Conveyor Flat Belt with Built-in Motor Drive
Pulley Diameter 70 mm
MISUMI Center Drive Belt Conveyor MISUMI Belt Conveyor Double Row Synchronous Belt Conveyor MISUMI Conveyor Aluminum Frame aluminium frame
Representative Model: E-CVGTB Representative Model: E-CVGTE Representative Model: E-CVSMA
 
Related Documents   Click here    

(1) Motor wiring method
 
(2) Flat belt specification list 
(3) Deviation adjustment method 
(4) Conveyor body weight 
Viewed Products
Recently Viewed Products
My Components
My Components
0
Cart
Cart
Economy Series
MRO Product

Chat with MISUMI

Chat service is available for any inquiry to MISUMI

Service hours

9:00 - 18:00 (Mon-Sat)

For out of service hours, you can leave a message to us.
We will reply to your inquiries on the next business day.
(except Sundays and public holidays).

Noted for use

Chat service is for Corporate customers and limited for Thai language.

Request for Quotation and Place Order is not available on Chat.

Start chat