Can the economy series adjuster, standard type with glue, be used on inclined ground?

Please use the economy series adjuster, standard type with glue, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.

Does the economy series adjuster, standard type with glue, have a height adjustment knob?

The economy series adjuster, standard type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-CFJSN100-20-120

type Thread Material Thread Surface Treatment Body Material Main Body Surface Treatment Width D Allowable Load (Details) Screw Length A Main Body Height E Nominal of Thread M Screw Rod Surface Treatment Base Surface Treatment CAD Days to Ship

Specification/Dimensions

type
- C-CFJSN
- C-CFJSNS
Clear
Thread Material
- Stainless Steel
  - SUS304
  - Stainless Steel
- Steel
  - S45C
  - Steel
Clear
Thread Surface Treatment
- Not Provided
- Zinc Plating
Clear
Body Material
- Stainless Steel
  - SUS304
  - Stainless Steel
  - Stainless Steel
- Steel
  - Steel
Clear
Main Body Surface Treatment
- Not Provided
- Black Plating
Clear
Width D(mm)
40

50

60

80

100
Clear
Allowable Load (Details)(kN)
3.5

4

4.5

5
Clear
Screw Length A(mm)
60

80

100

120

150

180

200
Clear
Main Body Height E(mm)
82.5

104

105

107

125

127

129

130

149

150

152

177

179

182

184

214

232

234
Clear
Nominal of Thread M(mm)
8

10

12

16

20

24
Clear
Screw Rod Surface Treatment
- Natural Color
- Zinc Plating
Clear
Base Surface Treatment
- Electro Plated Black
- Electropolishing
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

6 Day(s) or Less
Clear

Specify Alterations

Leveling Mounts Anti-Vibration (C-CFJSN100-20-120)

Name: Leveling Mounts Anti-Vibration
Brand: MISUMI
Price: 347.4 THB
Availability: InStock

ECONOMY ADJUSTER PADS

Leveling Mounts Anti-Vibration (C-CFJSN100-20-120)

Click this image to zoom it.

Move the mouse over or click the image to zoom

Compare This Product

Volume Discount

Check FAQ of this product (2)

Brand :

MISUMI

MiSUMi C-VALUE

MISUMI

Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)Caution

Download Free! >>Economy Series Catalog ver2023 (TH-EN)_Part18 CLICK here

Product Description

- Economy series Leveling Mounts, Anti-Vibration.
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJSN and C-CFJSNS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Body Surface Treatment: Black plating for Q235 Carbon Steel.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 60, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.

Adjuster Product Overview

Economy series Adjuster Standard type with glue
An adjuster with high quality, cheap price and excellent cost performance


Economy series Adjuster Standard type with glue

Adjuster Product Feature

【Adjuster Features】
No height adjustment knob.

【Material Table】

Type	A Body		B Glue Part
Type	Material	Surface Treatment	Material
C-CFJSN	Q235	Zinc Plating	Rubber
C-CFJSNS	Stainless Steel	-	Rubber

Note: The below material information is for Vietnam only:

Adjuster Usage Method

Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.

Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.

Example of Use Adjuster

Economy series Adjuster Standard type with glue

Dimensional Adjuster Drawing


Economy series Adjuster Standard type with glue

Adjuster Specification Table

Part Number			L	D	d	ℓ1	ℓ2	E	B	Vertical Load （kN）	Weight (g)
Type	M	A
C-CFJSN C-CFJSNS	8	60	82.5	40	35.5	5.5	6.5	17	13	3.5	107
	10	80	104			7	8		17	3.5	140
	12	80	105	50	45.5	8	10	17	19	4	214
		100	125							4	236
	16	80	107	60	55.5	10	13	17	24	4.5	367
		100	127							4.5	406
		150	177							4.5	485
	20	100	130			13	16		30	4.5	558
		120	150							4.5	607

Note: Thread size follows standard GB5782-1986 with below tolerance, please refer:
Note: Thread size follows standard GB5782-1986 with below tolerance, please refer:

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
C-CFJSN100-20-120

Part Number	Price	Name	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Thread Material	Thread Surface Treatment	Body Material	Main Body Surface Treatment	Width D (mm)	Allowable Load (Details) (kN)	Screw Length A (mm)	Main Body Height E (mm)	Nominal of Thread M (mm)	Screw Rod Surface Treatment	Base Surface Treatment
	฿ 347.40	ECONOMY ADJUSTER PADS	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	4.5	120	152	20	Zinc Plating	Electro Plated Black

Basic Information

Type	Adjusting Bolt Type	Adjusting Bolt Shape Type	Rubber Foot Type	Height Adjusting Handle	Not Provided
Properties	Standard	Swivel Mechanism	Not Provided

Please check the type/dimensions/specifications of the part C-CFJSN100-20-120 in the Leveling Mounts Anti-Vibration series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question: Can the economy series adjuster, standard type with glue, be used on inclined ground?: Answer: Please use the economy series adjuster, standard type with glue, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.
Question: Does the economy series adjuster, standard type with glue, have a height adjustment knob?: Answer: The economy series adjuster, standard type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

Products with similar specification

Part Number
C-CFJSN10-80
C-CFJSN100-20-150
C-CFJSN100-20-200
C-CFJSN100-24-150
C-CFJSN100-24-180
C-CFJSN100-24-200

Price	Minimum Order Qty	Volume Discount	Days to Ship	RoHS	Thread Material	Thread Surface Treatment	Body Material	Main Body Surface Treatment	Width D (mm)	Allowable Load (Details) (kN)	Screw Length A (mm)	Main Body Height E (mm)	Nominal of Thread M (mm)	Screw Rod Surface Treatment	Base Surface Treatment
฿ 66.67	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	40	3.5	80	104	10	Zinc Plating	Electro Plated Black
฿ 361.04	4 Piece(s)	Available	6 Day(s)	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	4.5	150	182	20	Zinc Plating	Electro Plated Black
฿ 381.82	4 Piece(s)	Available	6 Day(s)	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	4.5	200	232	20	Zinc Plating	Electro Plated Black
฿ 432.47	4 Piece(s)	Available	6 Day(s)	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	5	150	184	24	Zinc Plating	Electro Plated Black
฿ 466.23	4 Piece(s)	Available	6 Day(s)	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	5	180	214	24	Zinc Plating	Electro Plated Black
฿ 472.73	4 Piece(s)	Available	6 Day(s)	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Black Plating	100	5	200	234	24	Zinc Plating	Electro Plated Black