Aluminum Hinges Tapered Hole Type
Brand :
MISUMI
Caution
- Download Free! >>Economy Series Catalog ver2023 (TH-EN)_Part19 CLICK here
Product Description
Hinges are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Number of Holes : 4 (Through Hole/Counterbored Hole)
● Mounting Distance (mm.) : 21, 32, 42 and 47
● Material :
- Body : Aluminum A6063-T5
- Bushing: Polyacetal
● Surface Treatment : Clear Anodized and Black Anodized
[Application]
Hinges can be used with common combinations of aluminum profiles for smaller doors and windows on machines.
Product Overview of Flat Hinges
Economy series aluminum butterfly Flat Hinges with countersunk holes.The products in this series are aluminum butterfly Flat Hinges with countersunk holes, with surface clear anodizing and black anodizing available for selection based on the actual needs.
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with higher loads available for selection. For details, refer to the relevant products
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with higher loads available for selection. For details, refer to the relevant products
Dimensional Drawing of Flat Hinges
Specifications Overview of Flat Hinges
Product Material and Surface Treatment Overview of Flat Hinges:
Refer to the Specification Table below for detailed product dimensions| TYPE |  Material |  Surface Treatment |
| C-HHFL | A6063-T5 Bushing: Polyacetal | Alumite Treatment |
| C-HHBFL |
Specification Table of Flat Hinges
| Part Number |  Number of holes | *Allowable Load | Mass | L | W | K | P | J | S | N | T | E | R | |||
 Type |  No. | kg | N | g | Through Hole | Counterbored Hole | ||||||||||
| C-HHFL (Clear Anodized) | 5 | 2 | 8 | 78 | 24 | 47 | 35.4 | 11 | 25 | 7.2 | 21 | 5.5 | 11 | 3.5 | 5.5 | 5 |
| 3 | 15 | 147 | 50 | 66 | 8 | |||||||||||
| 6 | 2 | 8 | 78 | 30 | 47 | 48 | 8.5 | 30 | 8 | 32 | 6.5 | 13 | 6 | 5.5 | ||
| 3 | 15 | 147 | 70 | 78 | 9 | |||||||||||
| 8 | 2 | 8 | 78 | 50 | 63 | 62 | 13 | 37 | 10 | 42 | ||||||
| 3 | 15 | 147 | 110 | 113 | 13.5 | 43 | ||||||||||
| 8－45 | 2 | 12 | 118 | 72 | 63 | 80 | 10 | 16.5 | 47 | 4.5 | ||||||
| C-HHBFL (Black Anodized) | 5 | 2 | 8 | 78 | 24 | 47 | 35.4 | 11 | 25 | 7.2 | 21 | 5.5 | 11 | 3.5 | 5.5 | 5 |
| 3 | 15 | 147 | 50 | 66 | 8 | |||||||||||
| 6 | 2 | 8 | 78 | 30 | 47 | 48 | 8.5 | 30 | 8 | 32 | 6.5 | 13 | 6 | 5.5 | ||
| 3 | 15 | 147 | 70 | 78 | 9 | |||||||||||
| 8 | 2 | 8 | 78 | 50 | 63 | 62 | 13 | 37 | 10 | 42 | ||||||
| 3 | 15 | 147 | 110 | 113 | 13.5 | 43 | ||||||||||
| 8－45 | 2 | 12 | 118 | 72 | 63 | 80 | 10 | 16.5 | 47 | 4.5 | ||||||
Usage Method of Flat Hinges
According to the weight of the door body where the Flat Hinges is mounted, the load-carrying capacity of the hinge can be calculated.Determine the utilization direction first, and calculate according to the length and width of the door body
| Utilization Method of Flat Hinges | Lengthwise Utilization | Lateral Utilization | |
| A=2XB | A≠2XB | - | |
 |  |  | |
| Allowable Load Calculation Formula | Allowable Load =W | Allowable Load =W(B/A)*2 | Allowable Load =W |
Example Use of Flat Hinges
Depending on the profile to be fixed, the selectable Flat Hinges specifications can be determined by the allowable load weight.For details, refer to the following table for the applicable hinge model.
Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.
Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.
| Representative Dimensional Drawing | Type of Matching Profile | Suitable Profile | * Allowable Load | Product Model | Surface Treatment | Mounting Pitch S mm | |
| KG | N | ||||||
 | Profile of the Same Size on Two Sides | Link 20/20 Profile | 8 | 78 | C-HHFL5 | Clear Anodized | 21 |
| C-HHBFL5 | Black Anodized | ||||||
| 10 | 98 | HHPSN5 | Clear Anodized | ||||
| HHPBSN5 | Black Anodized | ||||||
| 20 | 196 | C-HHDL5 | Clear Anodized | ||||
| C-HHBDL5 | Black Anodized | ||||||
| Link 30/30 Profile | 8 | 78 | C-HHFL6 | Clear Anodized | 32 | ||
| C-HHBFL6 | Black Anodized | ||||||
| 10 | 98 | HHPSN6 | Clear Anodized | ||||
| HHPBSN6 | Black Anodized | ||||||
| 20 | 196 | C-HHDL6 | Clear Anodized | ||||
| C-HHBDL6 | Black Anodized | ||||||
| Link 40/40 Profile | 8 | 78 | C-HHFL8 | Clear Anodized | 42 | ||
| C-HHBFL8 | Black Anodized | ||||||
| 10 | 98 | HHPSN8 | Clear Anodized | ||||
| HHPBSN8 | Black Anodized | ||||||
| 20 | 196 | C-HHDL8 | Clear Anodized | ||||
| C-HHBDL8 | Black Anodized | ||||||
| Link 45/45 Profile | 12 | 118 | C-HHFL8-45 | Clear Anodized | 47 | ||
| C-HHBFL8-45 | Black Anodized | ||||||
| 15 | 147 | HHPSN8-45 | Clear Anodized | ||||
| HHPBSN8-45 | Black Anodized | ||||||
| 30 | 294 | C-HHDL8-45 | Clear Anodized | ||||
| C-HHBDL8-45 | Black Anodized | ||||||
Profile with Different Sizes on Two Sides | Link 20/30 Profile | 8 | 78 | C-HHFLS6-5 | Clear Anodized | 26.5 | |
| 10 | 98 | HHPSF6-5 | |||||
| 20 | 196 | C-HHDLS6-5 | |||||
| Link 30/40 Profile | 8 | 78 | C-HHFLS8-5 | 31.5 | |||
| 10 | 98 | HHPSF8-5 | |||||
| 20 | 196 | C-HHDLS8-5 | |||||
| Link 20/45 Profile | 8 | 78 | C-HHFLS845-5 | 34 | |||
| 10 | 98 | HHPSF845-5 | |||||
| 20 | 196 | C-HHDLS845-5 | |||||
| Link 20/40 Profile | 12 | 118 | C-HHFLS8-6 | 37 | |||
| 15 | 147 | HHPSF8-6 | |||||
| 30 | 294 | C-HHDLS8-6 | |||||
| Link 30/45 Profile | 12 | 118 | C-HHFLS845-6 | 39 | |||
| 15 | 147 | HHPSF845-6 | |||||
| 30 | 294 | C-HHDLS845-6 | |||||
Precautions of Flat Hinges
To install the hinge on the panel, etc., it is recommended to choose the nut for the butterfly Flat Hinges. For details, you can search TYPE: HHPNT or HHPFNT in the website to choose according to the size requirements.