(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(178 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSSFGT6-[20-900/1]-M3

Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Change Tapped Thread M to Fine One [MSC] Tapped (Coarse Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] type Material CAD Days to Ship

Specification/Dimensions

Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[15-1500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
Clear
Tapped (Coarse(mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
type
- PSFGT
- PSFJT
- PSFUT
- PSSFGT
- PSSFJT
- PSSFUT
- RSFJT
- SFJT
- SFUT
- SSFJT
- SSFUT
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less

5 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Tapped

Name: Linear Shafts-One End Tapped
Brand: MISUMI
Availability: PreOrder

Compare This Product

Brand :

MISUMI

Part Number :

PSSFGT6-[20-900/1]-M3

PSSFGT8-[20-1100/1]-M[3,4,5]

PSSFGT10-[20-1200/1]-M[3,4,5,6]

PSSFGT10-[20-1200/1]-MD6

PSSFGT12-[20-1400/1]-M[4,5,6,8]

PSSFGT12-[20-1400/1]-MD[6,8]

PSSFGT12-[20-1400/1]-MSC8

PSSFGT13-[25-1400/1]-M[4,5,6,8]

PSSFGT13-[25-1400/1]-MD[6,8]

PSSFGT13-[25-1400/1]-MSC8

PSSFGT15-[25-1400/1]-M[4,5,6,8,10]

PSSFGT15-[25-1400/1]-MD[6,8,10]

PSSFGT15-[25-1400/1]-MSC[8,10]

PSSFGT16-[30-1400/1]-M[4,5,6,8,10]

PSSFGT16-[30-1400/1]-MD[6,8,10]

PSSFGT16-[30-1400/1]-MSC[8,10]

PSSFGT18-[30-1400/1]-M[4,5,6,8,10,12]

PSSFGT18-[30-1400/1]-MD[6,8,10,12]

PSSFGT18-[30-1400/1]-MSC[8,10,12]

PSSFGT20-[30-1400/1]-M[4,5,6,8,10,12]

PSSFGT6-[20-900/1]-M3

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]One end female thread type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFJT	SFUT	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >>P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFJT	SSFUT	-	SUS440C or 13Cr stainless		-
PSFJT	PSFUT	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJT	PSSFUT	-	SUS440C or 13Cr stainless
RSFJT	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGT	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGT	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Full Length Hardness Guaranteed Shafts p1_155
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M
SFJT8	-	200	-	M4
RSFJT20	-	325	-	M8

Part Number			L 1mm Increments	M (Coarse) Selection													D Tol.			C
Type		D	L 1mm Increments	M (Coarse) Selection													g6	h5	f8	C
(D Tol. g6) SFJT SSFJT PSFJT PSSFJT (D Tol. f8) PSFGT (D≥6) PSSFGT (D≥6)	(D Tol. h5) SFUT SSFUT PSFUT PSSFUT	4	20~ 300	2													-0.004 -0.012	0 -0.005	-	0.2 or Less
		5	20~ 400		2.6	3											-0.004 -0.012	0 -0.005	-	0.2 or Less
		6	15~ 800			3											-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	15~1000			3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	15~1000			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	15~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	15~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	15~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200				4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200				4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		25	35~1200				4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse) Selection											D Tol.	C
Type	D	L 1mm Increments	M (Coarse) Selection											g6	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFJT	4	20~300	2											-0.004 -0.012	0.2 or Less
	5	20~400		2.6	3									-0.004 -0.012	0.2 or Less
	6	20~500			3									-0.004 -0.012	0.5 or Less
	8	20~500			3	4	5							-0.005 -0.014	0.5 or Less
	10	20~500			3	4	5	6						-0.005 -0.014	0.5 or Less
	12	20~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	13	25~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	15	25~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	16	30~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	18	30~500				4	5	6	8	10	12			-0.006 -0.017	0.5 or Less
	20	30~500				4	5	6	8	10	12			-0.007 -0.020	1.0 or Less
	25	35~500				4	5	6	8	10	12	16		-0.007 -0.020	1.0 or Less
	30	35~500						6	8	10	12	16	20	-0.007 -0.020	1.0 or Less

[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Alterations

One End Tapped:Related Image

Shaft Alteration Guide

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
PSSFGT6-[20-900/1]-M3
PSSFGT8-[20-1100/1]-M[3,4,5]
PSSFGT10-[20-1200/1]-M[3,4,5,6]
PSSFGT10-[20-1200/1]-MD6
PSSFGT12-[20-1400/1]-M[4,5,6,8]
PSSFGT12-[20-1400/1]-MD[6,8]
PSSFGT12-[20-1400/1]-MSC8
PSSFGT13-[25-1400/1]-M[4,5,6,8]
PSSFGT13-[25-1400/1]-MD[6,8]
PSSFGT13-[25-1400/1]-MSC8
PSSFGT15-[25-1400/1]-M[4,5,6,8,10]
PSSFGT15-[25-1400/1]-MD[6,8,10]
PSSFGT15-[25-1400/1]-MSC[8,10]
PSSFGT16-[30-1400/1]-M[4,5,6,8,10]
PSSFGT16-[30-1400/1]-MD[6,8,10]
PSSFGT16-[30-1400/1]-MSC[8,10]
PSSFGT18-[30-1400/1]-M[4,5,6,8,10,12]
PSSFGT18-[30-1400/1]-MD[6,8,10,12]
PSSFGT18-[30-1400/1]-MSC[8,10,12]
PSSFGT20-[30-1400/1]-M[4,5,6,8,10,12]
PSSFGT20-[30-1400/1]-MD[6,8,10,12]
PSSFGT20-[30-1400/1]-MSC[8,10,12,14]
PSSFGT25-[35-1400/1]-M[4,5,6,8,10,12,16]
PSSFGT25-[35-1400/1]-MD[6,8,10,12,16]
PSSFGT25-[35-1400/1]-MSC[8,10,12,14,18]
PSSFGT30-[35-1500/1]-M[6,8,10,12,16,20]
PSSFGT30-[35-1500/1]-MD[6,8,10,12,16,20]
PSSFGT30-[35-1500/1]-MSC[8,10,12,14,18]
PSSFGT35-[35-1500/1]-M[8,10,12,16,20,24]
PSSFGT35-[35-1500/1]-MSC[8,10,12,14,18]
PSSFGT40-[50-1500/1]-M[10,12,16,20,24,30]
PSSFGT40-[50-1500/1]-MSC[10,12,14,18]
PSSFGT50-[65-1500/1]-M[12,16,20,24,30]
PSSFGT50-[65-1500/1]-MSC[12,14,18]
PSSFJT4-[20-300/1]-M2
PSSFJT5-[20-400/1]-M[2.6,3]
PSSFJT6-[15-900/1]-M3
PSSFJT8-[15-1100/1]-M[3,4,5]
PSSFJT10-[15-1200/1]-M[3,4,5,6]
PSSFJT10-[15-1200/1]-MD6
PSSFJT12-[15-1400/1]-M[3,4,5,6,8]
PSSFJT12-[15-1400/1]-MD[6,8]
PSSFJT12-[15-1400/1]-MSC8
PSSFJT13-[15-1400/1]-M[3,4,5,6,8]
PSSFJT13-[15-1400/1]-MD[6,8]
PSSFJT13-[15-1400/1]-MSC8
PSSFJT15-[15-1400/1]-M[3,4,5,6,8,10]
PSSFJT15-[15-1400/1]-MD[6,8,10]
PSSFJT15-[15-1400/1]-MSC[8,10]
PSSFJT16-[15-1400/1]-M[4,5,6,8,10]
PSSFJT16-[15-1400/1]-MD[6,8,10]
PSSFJT16-[15-1400/1]-MSC[8,10]
PSSFJT18-[30-1400/1]-M[4,5,6,8,10,12]
PSSFJT18-[30-1400/1]-MD[6,8,10,12]
PSSFJT18-[30-1400/1]-MSC[8,10,12]
PSSFJT20-[30-1400/1]-M[4,5,6,8,10,12]
PSSFJT20-[30-1400/1]-MD[6,8,10,12]
PSSFJT20-[30-1400/1]-MSC[8,10,12,14]
PSSFJT25-[35-1400/1]-M[4,5,6,8,10,12,16]
PSSFJT25-[35-1400/1]-MD[6,8,10,12,16]
PSSFJT25-[35-1400/1]-MSC[8,10,12,14,18]
PSSFJT30-[35-1500/1]-M[6,8,10,12,16,20]
PSSFJT30-[35-1500/1]-MD[6,8,10,12,16,20]
PSSFJT30-[35-1500/1]-MSC[8,10,12,14,18]
PSSFJT35-[35-1500/1]-M[8,10,12,16,20,24]
PSSFJT35-[35-1500/1]-MSC[8,10,12,14,18]
PSSFJT40-[50-1500/1]-M[10,12,16,20,24,30]
PSSFJT40-[50-1500/1]-MSC[10,12,14,18]
PSSFJT50-[65-1500/1]-M[12,16,20,24,30]
PSSFJT50-[65-1500/1]-MSC[12,14,18]
PSSFUT4-[20-300/1]-M2
PSSFUT5-[20-400/1]-M[2.6,3]
PSSFUT6-[20-900/1]-M3
PSSFUT8-[20-1100/1]-M[3,4,5]
PSSFUT10-[20-1200/1]-M[3,4,5,6]
PSSFUT10-[20-1200/1]-MD6
PSSFUT12-[20-1400/1]-M[4,5,6,8]
PSSFUT12-[20-1400/1]-MD[6,8]
PSSFUT12-[20-1400/1]-MSC8
PSSFUT13-[25-1400/1]-M[4,5,6,8]
PSSFUT13-[25-1400/1]-MD[6,8]
PSSFUT13-[25-1400/1]-MSC8
PSSFUT15-[25-1400/1]-M[4,5,6,8,10]
PSSFUT15-[25-1400/1]-MD[6,8,10]
PSSFUT15-[25-1400/1]-MSC[8,10]
PSSFUT16-[30-1400/1]-M[4,5,6,8,10]
PSSFUT16-[30-1400/1]-MD[6,8,10]
PSSFUT16-[30-1400/1]-MSC[8,10]
PSSFUT18-[30-1400/1]-M[4,5,6,8,10,12]
PSSFUT18-[30-1400/1]-MD[6,8,10,12]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread M to Fine One [MSC] (mm)	Tapped (Coarse (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	6	20 ～ 900	f8	No Induction Hardening	-	3	3	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	8	20 ～ 1100	f8	No Induction Hardening	-	3 ～ 5	3 ～ 5	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	10	20 ～ 1200	f8	No Induction Hardening	-	3 ～ 6	3 ～ 6	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	10	20 ～ 1200	f8	No Induction Hardening	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1400	f8	No Induction Hardening	-	4 ～ 8	4 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1400	f8	No Induction Hardening	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1400	f8	No Induction Hardening	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1400	f8	No Induction Hardening	-	4 ～ 8	4 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1400	f8	No Induction Hardening	-	6 ～ 8	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1400	f8	No Induction Hardening	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1400	f8	No Induction Hardening	-	4 ～ 10	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1400	f8	No Induction Hardening	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1400	f8	No Induction Hardening	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1400	f8	No Induction Hardening	-	4 ～ 10	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1400	f8	No Induction Hardening	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1400	f8	No Induction Hardening	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1400	f8	No Induction Hardening	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1400	f8	No Induction Hardening	-	6 ～ 12	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1400	f8	No Induction Hardening	8 ～ 12	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1400	f8	No Induction Hardening	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1400	f8	No Induction Hardening	-	6 ～ 12	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1400	f8	No Induction Hardening	8 ～ 14	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1400	f8	No Induction Hardening	-	4 ～ 16	4 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1400	f8	No Induction Hardening	-	6 ～ 16	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1400	f8	No Induction Hardening	8 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	6 ～ 20	6 ～ 20	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	6 ～ 20	-	6 ～ 20
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	-	8 ～ 24	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	-	10 ～ 30	10 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	10 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	-	12 ～ 30	12 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	12 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	4	20 ～ 300	g6	Induction Hardened (56HRC~)	-	-	2	-
-	LINEAR SHAFT	1 Piece(s)	8 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	5	20 ～ 400	g6	Induction Hardened (56HRC~)	-	2.6 ～ 3	2.6 ～ 3	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	6	15 ～ 900	g6	Induction Hardened (56HRC~)	-	-	3	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	15 ～ 1100	g6	Induction Hardened (56HRC~)	-	3 ～ 5	3 ～ 5	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	15 ～ 1200	g6	Induction Hardened (56HRC~)	-	3 ～ 6	3 ～ 6	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	15 ～ 1200	g6	Induction Hardened (56HRC~)	-	-	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	3 ～ 8	3 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	15 ～ 1400	g6	Induction Hardened (56HRC~)	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	3 ～ 8	3 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	15 ～ 1400	g6	Induction Hardened (56HRC~)	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	3 ～ 10	3 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	15 ～ 1400	g6	Induction Hardened (56HRC~)	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	4 ～ 10	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	15 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	15 ～ 1400	g6	Induction Hardened (56HRC~)	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	30 ～ 1400	g6	Induction Hardened (56HRC~)	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	30 ～ 1400	g6	Induction Hardened (56HRC~)	-	6 ～ 12	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	30 ～ 1400	g6	Induction Hardened (56HRC~)	8 ～ 12	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	30 ～ 1400	g6	Induction Hardened (56HRC~)	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	30 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	30 ～ 1400	g6	Induction Hardened (56HRC~)	8 ～ 12	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	35 ～ 1400	g6	Induction Hardened (56HRC~)	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	35 ～ 1400	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	35 ～ 1400	g6	Induction Hardened (56HRC~)	8 ～ 12	-	-	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (56HRC~)	-	6 ～ 12	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (56HRC~)	-	6	-	6
-	LINEAR SHAFT	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (56HRC~)	8 ～ 12	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	35	35 ～ 1500	g6	Induction Hardened (56HRC~)	-	8 ～ 24	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	35	35 ～ 1500	g6	Induction Hardened (56HRC~)	8 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	40	50 ～ 1500	g6	Induction Hardened (56HRC~)	-	10 ～ 30	10 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	40	50 ～ 1500	g6	Induction Hardened (56HRC~)	10 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	50	65 ～ 1500	g6	Induction Hardened (56HRC~)	-	12 ～ 30	12 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	50	65 ～ 1500	g6	Induction Hardened (56HRC~)	12 ～ 18	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	4	20 ～ 300	h5	Induction Hardened (56HRC~)	-	-	2	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	5	20 ～ 400	h5	Induction Hardened (56HRC~)	-	2.6 ～ 3	2.6 ～ 3	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	6	20 ～ 900	h5	Induction Hardened (56HRC~)	-	-	3	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	20 ～ 1100	h5	Induction Hardened (56HRC~)	-	3 ～ 5	3 ～ 5	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 1200	h5	Induction Hardened (56HRC~)	-	3 ～ 6	3 ～ 6	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 1200	h5	Induction Hardened (56HRC~)	-	-	-	6
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	20 ～ 1400	h5	Induction Hardened (56HRC~)	-	4 ～ 8	4 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	20 ～ 1400	h5	Induction Hardened (56HRC~)	-	6 ～ 8	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	20 ～ 1400	h5	Induction Hardened (56HRC~)	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1400	h5	Induction Hardened (56HRC~)	-	4 ～ 8	4 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1400	h5	Induction Hardened (56HRC~)	-	6 ～ 8	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1400	h5	Induction Hardened (56HRC~)	8	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1400	h5	Induction Hardened (56HRC~)	-	4 ～ 10	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1400	h5	Induction Hardened (56HRC~)	-	6 ～ 10	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1400	h5	Induction Hardened (56HRC~)	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	30 ～ 1400	h5	Induction Hardened (56HRC~)	-	4 ～ 10	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	30 ～ 1400	h5	Induction Hardened (56HRC~)	-	6 ～ 10	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	30 ～ 1400	h5	Induction Hardened (56HRC~)	8 ～ 10	-	-	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	30 ～ 1400	h5	Induction Hardened (56HRC~)	-	4 ～ 12	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	4 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	30 ～ 1400	h5	Induction Hardened (56HRC~)	-	6 ～ 12	-	6 ～ 12

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Top of the page

Payment Methods

Credit Card

Bank

Prompt Pay

Cash: Cash On Delivery

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 8:00 - 18:00 (Mon-Sat),*Order cut off time is 17:00 / Online order cut off time is 18:00

Tel:

033-684730
Email: cs@misumi.co.th

Chat Now

Categories

Search by Category

Categories

Search by Category

How can we improve?