Post Assembly Insertion Screw - For 5 Series (Slot Width 6mm) Aluminum Frames

Dimensional Drawing of Nuts

■ Post-insertion bolt: Effective length of bolt

HATLSN5-4

Specification Table of Nuts

Specifications and Overview of Nuts

• This product is a Nuts with an integrated bolt.
• This reduces the amount of work required to tighten bolts.
• Economy typealso available.

• The conductive Nuts has a protrusion.
• When installed, the protrusions peel off the anodized coating on the aluminum frame, making it conductive.

How to Use of Nuts

• This product is a post-assembly Nuts that can be installed from the groove after assembly.
• The bolts can be seen even after being inserted into the frame groove, making it easy to position them with the joining parts and connect the brackets.

 

Selection Support Information of Nuts

■Compatible series

This product is compatible withMisumi 5 series (slot width 6mm) aluminum frames.

5 Series

■Difference between first-in and last-in

- MISUMI offers a wide range of aluminum frame Nuts, including both first-in and last-in types. Use them according to your application.
First-in: Install from the groove end face before assembly. The wide design means there is little play inside the groove, making bolt tightening easy.

Post-insertion: Can be inserted into the groove after assembly.

■ If the aluminum frame becomes stuck and cannot be removed

To remove the Nuts, hook the hex wrench into the hole in the Nuts and turn it at a right angle to the groove.

5 Series Related Parts of Nuts