(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(437 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Hardness Change Thread M to Fine One [MMC] Change Thread M to Fine One [MMS] Change Thread N to Fine One [NMC] Change Thread N to Fine One [NMS] F T Threaded (Coarse) [M] Threaded (Coarse) [N] type Shaft Fit Tolerance CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[5-90/1mm Unit(s)]
Clear
T(mm)
[5-90/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSAFM
- PSAGM
- PSFMU
- PSSAFM
- PSSAGM
- PSSFMU
- RSAFM
- SAFM
- SFMU
- SSAFM
- SSFMU
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

5 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

Precision Linear Shafts - Both Ends Male Thread with Undercut (Part Number)

Name: Precision Linear Shafts - Both Ends Male Thread with Undercut
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Compare This Product

Brand :

MISUMI

Part Number :

SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]

SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMC[6,8,10,12,15]

SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMS[10,12,14]

SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]

SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]

SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]

SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]

SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]

SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]

SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]

SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]

SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]

SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]

SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]

SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]

SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]

SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]

SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]

SFMU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]

SFMU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]

SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends. L size standard expanded! You can now purchase from an even more complete lineup.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]
SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMC[6,8,10,12,15]
SFMU18-[25-1390/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMS[10,12,14]
SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]
SFMU20-[25-1390/1]-F[5-48/1]-M[8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]
SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]
SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]
SFMU20-[25-1390/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]
SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]
SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]
SFMU20-[25-1390/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]
SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]
SFMU25-[25-1390/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]
SFMU25-[25-1390/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]
SFMU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]
SFMU25-[25-1390/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]
SFMU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
SFMU30-[25-1490/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
SFMU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
SFMU30-[25-1490/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMS[10,12,14,18]
SFMU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
SFMU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
SFMU30-[25-1490/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]
SFMU35-[25-1490/1]-F[5-90/1]-M[10,12,16,20,24,30]-T[5-90/1]-N[10,12,16,20,24,30]
SFMU35-[25-1490/1]-F[5-90/1]-M[10,12,16,20,24,30]-T[5-90/1]-NMC[10,12,15,17,20,25,30]
SFMU35-[25-1490/1]-F[5-90/1]-M[10,12,16,20,24,30]-T[5-90/1]-NMS[10,12,14,18]
SFMU35-[25-1490/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-T[5-90/1]-N[10,12,16,20,24,30]
SFMU35-[25-1490/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-T[5-90/1]-NMC[10,12,15,17,20,25,30]
SFMU35-[25-1490/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-T[5-90/1]-NMS[10,12,14,18]
SFMU35-[25-1490/1]-F[5-90/1]-MMS[10,12,14,18]-T[5-90/1]-N[10,12,16,20,24,30]
SFMU35-[25-1490/1]-F[5-90/1]-MMS[10,12,14,18]-T[5-90/1]-NMC[10,12,15,17,20,25,30]
SFMU35-[25-1490/1]-F[5-90/1]-MMS[10,12,14,18]-T[5-90/1]-NMS[10,12,14,18]
SFMU40-[25-1490/1]-F[5-90/1]-M[12,16,20,24,30]-T[5-90/1]-N[12,16,20,24,30]
SFMU40-[25-1490/1]-F[5-90/1]-M[12,16,20,24,30]-T[5-90/1]-NMC[12,15,17,20,25,30]
SFMU40-[25-1490/1]-F[5-90/1]-M[12,16,20,24,30]-T[5-90/1]-NMS[12,14,18]
SFMU40-[25-1490/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-T[5-90/1]-N[12,16,20,24,30]
SFMU40-[25-1490/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-T[5-90/1]-NMC[12,15,17,20,25,30]
SFMU40-[25-1490/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-T[5-90/1]-NMS[12,14,18]
SFMU40-[25-1490/1]-F[5-90/1]-MMS[12,14,18]-T[5-90/1]-N[12,16,20,24,30]
SFMU40-[25-1490/1]-F[5-90/1]-MMS[12,14,18]-T[5-90/1]-NMC[12,15,17,20,25,30]
SFMU40-[25-1490/1]-F[5-90/1]-MMS[12,14,18]-T[5-90/1]-NMS[12,14,18]
SFMU50-[25-1490/1]-F[5-90/1]-M[16,20,24,30]-T[5-90/1]-N[16,20,24,30]
SFMU50-[25-1490/1]-F[5-90/1]-M[16,20,24,30]-T[5-90/1]-NMC[15,17,20,25,30]
SFMU50-[25-1490/1]-F[5-90/1]-M[16,20,24,30]-T[5-90/1]-NMS[14,18]
SFMU50-[25-1490/1]-F[5-90/1]-MMC[15,17,20,25,30]-T[5-90/1]-N[16,20,24,30]
SFMU50-[25-1490/1]-F[5-90/1]-MMC[15,17,20,25,30]-T[5-90/1]-NMC[15,17,20,25,30]
SFMU50-[25-1490/1]-F[5-90/1]-MMC[15,17,20,25,30]-T[5-90/1]-NMS[14,18]
SFMU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-N[16,20,24,30]
SFMU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-NMC[15,17,20,25,30]
SFMU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-NMS[14,18]
SSFMU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-N6
SSFMU8-[25-1090/1]-F[5-18/1]-M[5,6]-T[5-18/1]-NMC6
SSFMU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-N6
SSFMU8-[25-1090/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6
SSFMU10-[25-1190/1]-F[5-24/1]-M8-T[5-24/1]-N[6,8]
SSFMU10-[25-1190/1]-F[5-24/1]-M8-T[5-24/1]-NMC[6,8]
SSFMU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]
SSFMU10-[25-1190/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]
SSFMU12-[25-1390/1]-F[5-30/1]-M[8,10]-T[5-30/1]-N[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-M[8,10]-T[5-30/1]-NMC[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-M[8,10]-T[5-30/1]-NMS10
SSFMU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10
SSFMU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]
SSFMU12-[25-1390/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10
SSFMU13-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-N[6,8,10,12]
SSFMU13-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-NMC[6,8,10]
SSFMU13-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-NMS10
SSFMU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-N[6,8,10,12]
SSFMU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMC[6,8,10]
SSFMU13-[25-1390/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMS10
SSFMU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,8,10,12]
SSFMU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10]
SSFMU13-[25-1390/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10
SSFMU15-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-N[6,8,10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-M[8,10,12]-T[5-36/1]-NMS[10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]
SSFMU15-[25-1390/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[6,8,10,12]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 14	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 14	6 ～ 15	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 14	-	10 ～ 14	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	6 ～ 17	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	6 ～ 17	-	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	6 ～ 17	-	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	8 ～ 20	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	8 ～ 20	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	8 ～ 20	-	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	8 ～ 20	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1390	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	8 ～ 25	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	8 ～ 25	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	8 ～ 25	-	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	8 ～ 25	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 90	5 ～ 90	10 ～ 30	10 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	10 ～ 30	-	5 ～ 90	5 ～ 90	10 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 90	5 ～ 90	10 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 30	-	-	-	5 ～ 90	5 ～ 90	-	10 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 30	-	10 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	10 ～ 30	-	-	10 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 90	5 ～ 90	-	10 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	10 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 90	5 ～ 90	12 ～ 30	12 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	12 ～ 30	-	5 ～ 90	5 ～ 90	12 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	12 ～ 18	5 ～ 90	5 ～ 90	12 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 30	-	-	-	5 ～ 90	5 ～ 90	-	12 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 30	-	12 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	12 ～ 30	-	-	12 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	12 ～ 18	-	-	5 ～ 90	5 ～ 90	-	12 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	12 ～ 18	12 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	12 ～ 18	-	12 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 90	5 ～ 90	16 ～ 30	16 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	15 ～ 30	-	5 ～ 90	5 ～ 90	16 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	-	-	14 ～ 18	5 ～ 90	5 ～ 90	16 ～ 30	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	15 ～ 30	-	-	-	5 ～ 90	5 ～ 90	-	16 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	15 ～ 30	-	15 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	15 ～ 30	-	-	14 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	14 ～ 18	-	-	5 ～ 90	5 ～ 90	-	16 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	14 ～ 18	15 ～ 30	-	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1490	h5	Induction Hardened (58HRC~)	-	14 ～ 18	-	14 ～ 18	5 ～ 90	5 ～ 90	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1090	h5	Induction Hardened (56HRC~)	-	-	-	-	5 ～ 18	5 ～ 18	-	6
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1090	h5	Induction Hardened (56HRC~)	-	-	6	-	5 ～ 18	5 ～ 18	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1090	h5	Induction Hardened (56HRC~)	6	-	-	-	5 ～ 18	5 ～ 18	-	6
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1090	h5	Induction Hardened (56HRC~)	6	-	6	-	5 ～ 18	5 ～ 18	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1190	h5	Induction Hardened (56HRC~)	-	-	-	-	5 ～ 24	5 ～ 24	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1190	h5	Induction Hardened (56HRC~)	-	-	6 ～ 8	-	5 ～ 24	5 ～ 24	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1190	h5	Induction Hardened (56HRC~)	6 ～ 8	-	-	-	5 ～ 24	5 ～ 24	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1190	h5	Induction Hardened (56HRC~)	6 ～ 8	-	6 ～ 8	-	5 ～ 24	5 ～ 24	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	10	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	-	10	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	-	10	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	10	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 10	-	-	10	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10	-	10	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	-	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 12	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 12	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	6 ～ 12	-	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1390	h5	Induction Hardened (56HRC~)	-	10 ～ 12	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12