(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(80 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-N6

Material Heat Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Change Thread M to Fine One [MMC] Change Thread M to Fine One [MMS] Change Thread N to Fine One [NMC] Change Thread N to Fine One [NMS] F T Threaded (Coarse) [M] Threaded (Coarse) [N] type Surface Treatment CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-990/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[5-72/1mm Unit(s)]
Clear
T(mm)
[5-72/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSAFM
- PSAGM
- PSFMU
- PSSAFM
- PSSAGM
- PSSFMU
- RSAFM
- SAFM
- SFMU
- SSAFM
- SSFMU
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

5 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

Precision Linear Shafts - Both Ends Male Thread with Undercut

Name: Precision Linear Shafts - Both Ends Male Thread with Undercut
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Compare This Product

Brand :

MISUMI

Part Number :

RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-N6

RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-NMC6

RSAFM8-[25-990/1]-F[5-18/1]-MMC6-T[5-18/1]-N6

RSAFM8-[25-990/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6

RSAFM10-[25-990/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]

RSAFM10-[25-990/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]

RSAFM10-[25-990/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]

RSAFM10-[25-990/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]

RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10

RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10

RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]

RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10

RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]

RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10]

RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10

RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-N6

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends. L size standard expanded! You can now purchase from an even more complete lineup.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-N6
RSAFM8-[25-990/1]-F[5-18/1]-M6-T[5-18/1]-NMC6
RSAFM8-[25-990/1]-F[5-18/1]-MMC6-T[5-18/1]-N6
RSAFM8-[25-990/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6
RSAFM10-[25-990/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]
RSAFM10-[25-990/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]
RSAFM10-[25-990/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]
RSAFM10-[25-990/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]
RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10
RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10
RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]
RSAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10
RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10]
RSAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10
RSAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-N[6,8,10,12]
RSAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMC[6,8,10]
RSAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMS10
RSAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,8,10,12]
RSAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10]
RSAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10
RSAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMC[6,8,10,12]
RSAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMS[10,12]
RSAFM16-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12,14]
RSAFM16-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12,14]
RSAFM16-[25-990/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-N[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMC[6,8,10,12]
RSAFM16-[25-990/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMS[10,12,14]
RSAFM18-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
RSAFM18-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15]
RSAFM18-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14]
RSAFM18-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-N[6,8,10,12,16]
RSAFM18-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMC[6,8,10,12,15]
RSAFM18-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMS[10,12,14]
RSAFM18-[25-990/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]
RSAFM18-[25-990/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMC[6,8,10,12,15]
RSAFM18-[25-990/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMS[10,12,14]
RSAFM20-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-990/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]
RSAFM20-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-990/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]
RSAFM20-[25-990/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-990/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-990/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]
RSAFM25-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
RSAFM25-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]
RSAFM25-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-990/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-990/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-990/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 18	5 ～ 18	6	6
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6	-	5 ～ 18	5 ～ 18	6	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 990	g6	Induction Hardened (58HRC~)	6	-	-	-	5 ～ 18	5 ～ 18	-	6
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 990	g6	Induction Hardened (58HRC~)	6	-	6	-	5 ～ 18	5 ～ 18	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 24	5 ～ 24	6 ～ 8	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 8	-	5 ～ 24	5 ～ 24	6 ～ 8	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 8	-	-	-	5 ～ 24	5 ～ 24	-	6 ～ 8
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 8	-	6 ～ 8	-	5 ～ 24	5 ～ 24	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 30	5 ～ 30	6 ～ 10	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10	-	5 ～ 30	5 ～ 30	6 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10	5 ～ 30	5 ～ 30	6 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	10	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	10	5 ～ 30	5 ～ 30	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	10	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	10	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 12	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 12	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 12	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 14	5 ～ 36	5 ～ 36	6 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	10 ～ 14	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	10 ～ 14	5 ～ 36	5 ～ 36	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	6 ～ 16	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 15	-	5 ～ 48	5 ～ 48	6 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 14	5 ～ 48	5 ～ 48	6 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 15	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 15	-	6 ～ 15	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 15	-	-	10 ～ 14	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	6 ～ 15	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	10 ～ 14	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	6 ～ 16	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 17	-	5 ～ 48	5 ～ 48	6 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 48	5 ～ 48	6 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 17	-	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	8 ～ 20	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 20	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 20	-	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 20	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	8 ～ 25	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 25	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 25	-	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	8 ～ 25	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	LINEAR SHAFT	1 Piece(s)	10 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-