(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก

How can we improve?

How can we improve?

* This form is only for feedback/comment on our website and service
Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

Configure

Part number has not been determine

(104 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSSFIG12-[25-1400/1]-F[2-40/1]-P[6-10/1]-M[4,5,6,8]-N4

End Shape (Left) Surface Treatment Shaft Dia. D Length L Hardness Shaft End Type B Change Tapped Thread M to Fine One [MSC] F Fine Thread [PMC] Fine Thread [PMS] P Tapped (Coarse) [N] Threaded (Coarse) [M] Threaded (Coarse) [P] type Material CAD Days to Ship

Specification/Dimensions

End Shape (Left)
- Tapped
- Threaded
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
Shaft Dia. D(Ø)
12

13

15

16

18

20

25

30
Clear
Length L(mm)
[25-1500/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
Shaft End Type
- One End Stepped and Tapped
- One End Tapped
- One End Threaded
- One End Threaded with O.D. same as Shaft O.D.
Clear
B(mm)
[3-145/1mm Unit(s)]
Clear
Change Tapped Thread M to Fine One [MSC](mm)
6

8

10

12

14

18
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
5

6

8

10

12

15

17

20

25
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
P(mm)
[6-27/1mm Unit(s)]
Clear
Tapped (Coarse) [N](mm)
4

5

6

8

10

12
Clear
Threaded (Coarse) [M](mm)
4

5

6

8

10

12

16

20

24
Clear
Threaded (Coarse) [P](mm)
5

6

8

10

12

16

20

24

30
Clear
type
- PSFIG
- PSFIN
- PSFIQ
- PSFIT
- PSSFIG
- PSSFIN
- PSSFIQ
- PSSFIT
- SFIG
- SFIN
- SFIQ
- SFIT
- SSFIG
- SSFIN
- SSFIQ
- SSFIT
Clear
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less
Clear

Specify Alterations

Shafts - Tapped Pilot Type

Name: Shafts - Tapped Pilot Type
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Compare This Product

Brand :

MISUMI

Part Number :

PSSFIG12-[25-1400/1]-F[2-40/1]-P[6-10/1]-M[4,5,6,8]-N4

PSSFIG13-[25-1400/1]-F[2-44/1]-P[6-11/1]-M[4,5,6,8]-N[4,5]

PSSFIG15-[25-1400/1]-F[2-52/1]-P[6-13/1]-M[4,5,6,8,10]-N[4,5]

PSSFIG16-[30-1400/1]-F[2-56/1]-P[6-14/1]-M[4,5,6,8,10]-N[4,5,6]

PSSFIG18-[30-1400/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-N[4,5,6]

PSSFIG20-[30-1400/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-N[5,6,8,10]

PSSFIG25-[35-1400/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-N[6,8,10,12]

PSSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,8,10,12,16,20,24]-N[6,8,10,12]

PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N4

PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10]-N4

PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N4

PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]

PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]

PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N[4,5]

PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]

PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]

PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS[10,12]-N[4,5]

PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-P[5,6,8,10,12,16]-N[4,5,6]

PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMC[5,6,8,10,12,15]-N[4,5,6]

PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMS[10,12,14]-N[4,5,6]

PSSFIG12-[25-1400/1]-F[2-40/1]-P[6-10/1]-M[4,5,6,8]-N4

Price :

---
Qty :
Days to Ship :

---
Total Price :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Direct drive shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are female thread pilot type.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
PSSFIG12-[25-1400/1]-F[2-40/1]-P[6-10/1]-M[4,5,6,8]-N4
PSSFIG13-[25-1400/1]-F[2-44/1]-P[6-11/1]-M[4,5,6,8]-N[4,5]
PSSFIG15-[25-1400/1]-F[2-52/1]-P[6-13/1]-M[4,5,6,8,10]-N[4,5]
PSSFIG16-[30-1400/1]-F[2-56/1]-P[6-14/1]-M[4,5,6,8,10]-N[4,5,6]
PSSFIG18-[30-1400/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-N[4,5,6]
PSSFIG20-[30-1400/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-N[5,6,8,10]
PSSFIG25-[35-1400/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-N[6,8,10,12]
PSSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,8,10,12,16,20,24]-N[6,8,10,12]
PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N4
PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10]-N4
PSSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N4
PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]
PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]
PSSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N[4,5]
PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]
PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]
PSSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS[10,12]-N[4,5]
PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-P[5,6,8,10,12,16]-N[4,5,6]
PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMC[5,6,8,10,12,15]-N[4,5,6]
PSSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMS[10,12,14]-N[4,5,6]
PSSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-P[5,6,8,10,12,16]-N[4,5,6]
PSSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6]
PSSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMS[10,12,14]-N[4,5,6]
PSSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-P[6,8,10,12,16,20]-N[5,6,8,10]
PSSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-PMC[6,8,10,12,15,17]-N[5,6,8,10]
PSSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-PMS[10,12,14,18]-N[5,6,8,10]
PSSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-P[8,10,12,16,20,24]-N[6,8,10,12]
PSSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-PMC[8,10,12,15,17,20]-N[6,8,10,12]
PSSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-PMS[10,12,14,18]-N[6,8,10,12]
PSSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12]
PSSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMC[8,10,12,15,17,20,25]-N[6,8,10,12]
PSSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMS[10,12,14,18]-N[6,8,10,12]
PSSFIQ12-[25-1398/1]-B[3-55/1]-N4
PSSFIQ16-[25-1398/1]-B[3-80/1]-N[4,5,6]
PSSFIQ20-[25-1398/1]-B[3-95/1]-N[5,6,8,10]
PSSFIQ30-[25-1498/1]-B[3-145/1]-N[6,8,10,12]
PSSFIT12-[25-1400/1]-M[4,5,6,8]-N4
PSSFIT12-[25-1400/1]-MSC8-N4
PSSFIT13-[25-1400/1]-M[4,5,6,8]-N[4,5]
PSSFIT13-[25-1400/1]-MSC8-N[4,5]
PSSFIT15-[25-1400/1]-M[4,5,6,8,10]-N[4,5]
PSSFIT15-[25-1400/1]-MSC[6,8,10]-N[4,5]
PSSFIT16-[30-1400/1]-M[4,5,6,8,10]-N[4,5,6]
PSSFIT16-[30-1400/1]-MSC[8,10]-N[4,5,6]
PSSFIT18-[30-1400/1]-M[4,5,6,8,10,12]-N[4,5,6]
PSSFIT18-[30-1400/1]-MSC[8,10,12]-N[4,5,6]
PSSFIT20-[30-1400/1]-M[4,5,6,8,10,12]-N[5,6,8,10]
PSSFIT20-[30-1400/1]-MSC[8,10,12,14]-N[5,6,8,10]
PSSFIT25-[35-1400/1]-M[4,5,6,8,10,12,16]-N[6,8,10,12]
PSSFIT25-[35-1400/1]-MSC[8,10,12,14,18]-N[6,8,10,12]
PSSFIT30-[35-1500/1]-M[6,8,10,12,16,20,24]-N[6,8,10,12]
PSSFIT30-[35-1500/1]-MSC[8,10,12,14,18]-N[6,8,10,12]
SSFIG12-[25-1400/1]-F[2-40/1]-P[6-10/1]-M[4,5,6,8]-N4
SSFIG13-[25-1400/1]-F[2-44/1]-P[6-11/1]-M[4,5,6,8]-N[4,5]
SSFIG15-[25-1400/1]-F[2-52/1]-P[6-13/1]-M[4,5,6,8,10]-N[4,5]
SSFIG16-[30-1400/1]-F[2-56/1]-P[6-14/1]-M[4,5,6,8,10]-N[4,5,6]
SSFIG18-[30-1400/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-N[4,5,6]
SSFIG20-[30-1400/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-N[5,6,8,10]
SSFIG25-[35-1400/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-N[6,8,10,12]
SSFIG30-[35-1500/1]-F[2-108/1]-P[9-27/1]-M[6,8,10,12,16,20,24]-N[6,8,10,12]
SSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N4
SSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10]-N4
SSFIN12-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N4
SSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]
SSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]
SSFIN13-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS10-N[4,5]
SSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-P[5,6,8,10,12]-N[4,5]
SSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMC[5,6,8,10,12]-N[4,5]
SSFIN15-[25-1398/1]-F[2-60/1]-B[3-55/1]-PMS[10,12]-N[4,5]
SSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-P[5,6,8,10,12,16]-N[4,5,6]
SSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMC[5,6,8,10,12,15]-N[4,5,6]
SSFIN16-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMS[10,12,14]-N[4,5,6]
SSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-P[5,6,8,10,12,16]-N[4,5,6]
SSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6]
SSFIN18-[25-1398/1]-F[2-80/1]-B[3-75/1]-PMS[10,12,14]-N[4,5,6]
SSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-P[6,8,10,12,16,20]-N[5,6,8,10]
SSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-PMC[6,8,10,12,15,17]-N[5,6,8,10]
SSFIN20-[25-1398/1]-F[2-100/1]-B[3-95/1]-PMS[10,12,14,18]-N[5,6,8,10]
SSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-P[8,10,12,16,20,24]-N[6,8,10,12]
SSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-PMC[8,10,12,15,17,20]-N[6,8,10,12]
SSFIN25-[25-1398/1]-F[2-120/1]-B[3-115/1]-PMS[10,12,14,18]-N[6,8,10,12]
SSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12]
SSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMC[8,10,12,15,17,20,25]-N[6,8,10,12]
SSFIN30-[25-1498/1]-F[2-150/1]-B[3-145/1]-PMS[10,12,14,18]-N[6,8,10,12]
SSFIQ12-[25-1398/1]-B[3-55/1]-N4
SSFIQ16-[25-1398/1]-B[3-75/1]-N[4,5,6]
SSFIQ20-[25-1398/1]-B[3-95/1]-N[5,6,8,10]
SSFIQ30-[25-1498/1]-B[3-145/1]-N[6,8,10,12]
SSFIT12-[25-1400/1]-M[4,5,6,8]-N4
SSFIT12-[25-1400/1]-MSC8-N4

Price	Name	Minimum Order Qty.	Days to Ship	RoHS	End Shape (Left)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Shaft End Type	B (mm)	Change Tapped Thread M to Fine One [MSC] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	P (mm)	Tapped (Coarse) [N] (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [P] (mm)
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 40	-	-	6 ～ 10	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 44	-	-	6 ～ 11	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 52	-	-	6 ～ 13	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 56	-	-	6 ～ 14	4 ～ 6	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 64	-	-	7 ～ 16	4 ～ 6	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 68	-	-	7 ～ 17	5 ～ 10	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	35 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 88	-	-	7 ～ 22	6 ～ 12	4 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 108	-	-	9 ～ 27	6 ～ 12	6 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 10	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 12	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 12	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10 ～ 12	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	-	-	4 ～ 6	-	5 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	5 ～ 15	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	10 ～ 14	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	-	-	4 ～ 6	-	5 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	5 ～ 17	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	10 ～ 14	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	-	-	-	5 ～ 10	-	6 ～ 20
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	6 ～ 17	-	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	-	10 ～ 18	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	-	-	-	6 ～ 12	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	8 ～ 20	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	-	10 ～ 18	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	-	-	-	6 ～ 12	-	8 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	8 ～ 25	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	-	10 ～ 18	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 55	-	-	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 80	-	-	-	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 95	-	-	-	-	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 145	-	-	-	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8	-	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	13	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8	-	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	15	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	6 ～ 10	-	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4 ～ 6	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8 ～ 10	-	-	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4 ～ 6	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	18	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8 ～ 12	-	-	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	5 ～ 10	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	20	30 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8 ～ 14	-	-	-	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	35 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	6 ～ 12	4 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	25	35 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8 ～ 18	-	-	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	6 ～ 12	6 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	30	35 ～ 1500	Induction Hardened (56HRC~)	One End Tapped	-	8 ～ 18	-	-	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 40	-	-	6 ～ 10	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 44	-	-	6 ～ 11	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	15	25 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 52	-	-	6 ～ 13	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 56	-	-	6 ～ 14	4 ～ 6	4 ～ 10	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	18	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 64	-	-	7 ～ 16	4 ～ 6	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	30 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 68	-	-	7 ～ 17	5 ～ 10	4 ～ 12	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	35 ～ 1400	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 88	-	-	7 ～ 22	6 ～ 12	4 ～ 16	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	35 ～ 1500	Induction Hardened (56HRC~)	One End Stepped and Tapped	-	-	2 ～ 108	-	-	9 ～ 27	6 ～ 12	6 ～ 24	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 10	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 12	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	13	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	5 ～ 12	-	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	15	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 55	-	2 ～ 60	-	10 ～ 12	-	4 ～ 5	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	-	-	4 ～ 6	-	5 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	5 ～ 15	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	10 ～ 14	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	-	-	4 ～ 6	-	5 ～ 16
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	5 ～ 17	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	18	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 75	-	2 ～ 80	-	10 ～ 14	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	-	-	-	5 ～ 10	-	6 ～ 20
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	6 ～ 17	-	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 95	-	2 ～ 100	-	10 ～ 18	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	-	-	-	6 ～ 12	-	8 ～ 24
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	8 ～ 20	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	25	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded	3 ～ 115	-	2 ～ 120	-	10 ～ 18	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	-	-	-	6 ～ 12	-	8 ～ 30
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	8 ～ 25	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded	3 ～ 145	-	2 ～ 150	-	10 ～ 18	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 55	-	-	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	16	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 75	-	-	-	-	-	4 ～ 6	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	20	25 ～ 1398	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 95	-	-	-	-	-	5 ～ 10	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	30	25 ～ 1498	Induction Hardened (56HRC~)	One End Threaded with O.D. same as Shaft O.D.	3 ～ 145	-	-	-	-	-	6 ～ 12	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	-	-	-	-	-	4	-	-
-	LINEAR SHAFT	1 Piece(s)	5 Day(s)	10	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	12	25 ～ 1400	Induction Hardened (56HRC~)	One End Tapped	-	8	-	-	-	-	4	-	-