(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Combination of both ends' shapes unavailable for standard products becomes available.
Part Number |
---|
FPSFJFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FPSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[2-750/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
FPSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FPSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FPSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FPSFJFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FPSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FPSFJFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FPSFJFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FPSFJFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FPSFJFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
FPSSFJFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FPSSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-N[3,4,5,6,8,10,12,16,20,24,30] |
FPSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FPSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FPSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FPSSFJFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FPSSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FPSSFJFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FPSSFJFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FPSSFJFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FPSSFJFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
FSFJFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1] |
FSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FSFJFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FSFJFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FSFJFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FSFJFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FSFJFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
FSFUFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FSFUFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1] |
FSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FSFUFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FSFUFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FSFUFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FSFUFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FSFUFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FSFUFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
FSSFJFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FSSFJFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1] |
FSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FSSFJFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FSSFJFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FSSFJFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FSSFJFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FSSFJFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FSSFJFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FSSFJFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
FSSFUFA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1] |
FSSFUFB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1] |
FSSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-H[1-1500/1] |
FSSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-H[1-1500/1] |
FSSFUFC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-H[1-1500/1] |
FSSFUFD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-H[1-1500/1]-Q[2-50/1] |
FSSFUFE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[2-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-H[1-1500/1]-Q[2-50/1] |
FSSFUFF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1] |
FSSFUFG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-H[1-1500/1] |
FSSFUFH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-H[1-1500/1]-W[6-24/1] |
FSSFUFT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-H[2-500/1]-Z[5-32/1] |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Basic Shape | End Shape (Left) | End Shape (Right) | Material | Surface Treatment | Shaft Dia. D (Ø) | Length L (mm) | Shaft Fit Tolerance | Hardness | B (mm) | Coarse [M] (mm) | Coarse [N] (mm) | F (mm) | Fine Thread [PMC] (mm) | Fine Thread [PMS] (mm) | Fine Thread [QMC] (mm) | Fine Thread [QMS] (mm) | H (mm) | J (mm) | P (mm) | Q (mm) | R (mm) | S (mm) | T (mm) | U (mm) | W (mm) | Z (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 2 ~ 750 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | 3 ~ 15 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | 10 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 19 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 16 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ~ 19 | 20 ~ 1000 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | 3 ~ 15 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | 10 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 19 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 16 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ~ 19 | 20 ~ 1000 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | 3 ~ 30 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | 10 ~ 18 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 19 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Steel] SUJ2 Equivalent | Not Provided | 16 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 19 | 20 ~ 1000 | g6 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | 3 ~ 15 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | 10 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 19 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Steel] SUJ2 Equivalent | Not Provided | 16 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (58HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Steel] SUJ2 Equivalent | Not Provided | 6 ~ 19 | 20 ~ 1000 | h5 | Induction Hardened (58HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 30 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | 3 ~ 30 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | 10 ~ 18 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 0 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 50 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 19 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 16 ~ 45 | 20 ~ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 19 | 20 ~ 1000 | g6 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | 3 ~ 15 | - | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | 10 | 1 ~ 1500 | - | - | - | - | 0 ~ 90 | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | One End Stepped | With Retaining Ring Grooves | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | 3 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | 2 ~ 50 | - | - | 2 ~ 250 | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | With Retaining Ring Grooves | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | 1 ~ 1500 | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Hex Socket Hole | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 19 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | - | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapped Hole | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 16 ~ 45 | 20 ~ 1500 | h5 | Induction Hardened (56HRC~) | - | - | 4 ~ 12 | - | - | - | - | - | 1 ~ 1500 | - | - | - | - | - | - | - | 6 ~ 24 | - | ||
- | LINEAR SHAFT | 1 Piece(s) | 7 Day(s) | 10 | Solid | With Retaining Ring Grooves | Tapered | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 6 ~ 19 | 20 ~ 1000 | h5 | Induction Hardened (56HRC~) | - | - | - | - | - | - | - | - | 2 ~ 500 | - | - | - | - | - | - | - | - | 5 ~ 32 |
Loading...
Shaft End Perpendicularity | Perpendicularity (0.2) | Heat Treatment | Induction Hardened |
---|
How can we improve?
How can we improve?