(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Select part number to Order Now/ Add to Cart
Part Number |
---|
M-SPA221 |
M-SUSPA211 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Stem Material | Color |
---|---|---|---|---|---|---|---|
฿ 4,141.00 |
AIR TYPE VIBRATION PAD(BLUE) | 1 Piece(s) | 5 Day(s) | Carbon Steel | Blue | ||
฿ 6,507.00 |
AIR TYPE VIBRATION PAD(WHITE) | 1 Piece(s) | Same day | Stainless Steel | White |
[Applications]
· Used to shake off the powder inside the hopper.
[Features]
· A silicone disc that does not easily damage the hopper.
· Heat-Resistant Temperature: 170°C or less
Part Number |
---|
M-SPA221 |
M-SUSPA211 |
Part Number | Price | Name | Minimum Order Qty. | Volume Discount | Days to Ship | Stem Material | Color |
---|---|---|---|---|---|---|---|
฿ 4,141.00 |
AIR TYPE VIBRATION PAD(BLUE) | 1 Piece(s) | 5 Day(s) | Carbon Steel | Blue | ||
฿ 6,507.00 |
AIR TYPE VIBRATION PAD(WHITE) | 1 Piece(s) | Same day | Stainless Steel | White |
Loading...
The product list can be filtered using the selections found beneath the specification item name.
■Usage
1. Drill a φ 22 hole on the hopper.
Attach around the middle of the tapered shape.
2. Remove the washer and nut attached to the main unit,
set so that the bolts of the vibration pad protrude from the inside of the hopper, then attach the washer and nut.
(Refer to the figure for the appearance after mounting.)
3. Install air piping in order to supply compressed air.
The inner diameter of the bolt of the vibration pad is 1/4” NPT thread.
(As the shape is different from 1/4” PT, the use of a NPTNPT⇒ PT conversion plug is recommended.)
Connect the air piping using a plug, coupler, hose joint, etc.
4. Supply air pressure of 0.2 MPa. Since there is constant vibration and pressure during air supply,
powder will not enter the vibration pad.
Since the vibration pad and hopper will be in close contact with each other even when the air supply is stopped and the vibration stops,
there is no ingress of powder.
How can we improve?
How can we improve?