Metal Bending Machine
Caution
Product Description
Sheet metal processing tools that can easily perform beautiful bending of aluminum and steel plates.
[Features]
· High-quality bending with clear ridge lines is possible with light force.
· The product can be bent up to 445 mm long, up to 0.6 mm thick with an steel plate without heat treatment and 1.5 mm with pure aluminum plate.
· Depending on the combination of groove spacing, almost all four sides can be bent in 5 mm or 10 mm increments from 10 to 420 mm (However, in the case of a box, 140, 160, 240 to 260, 310, 330, 360, and 370 mm cannot be machined).
[Application]
· The most basic bending for the meter panels of automobiles and the operations of robots.
· U-shape that can be applied to various covers, chassis, and frames of radio control cars.
· There is no restriction on the bending height, and it is also possible to manufacture trough-shaped trays and bend the square cross section (the bending dimensions are limited).
Features
●Depending on the combination of slot intervals, it is possible to bend most four sides with 5mm or 10mm increments to 10 to 420mm.Specification
●Bending Capacity（mm）:Iron Plate 0.6/Aluminum Plate 1.5●Total Length（mm）:510