Tube Fitting for General Piping, Elbow
Brand :
PISCO
Caution
- There are changes in the specifications for this series. Changes will be made sequentially from August 2024.
- The minimum order quantity varies depending on the selected model. Please check the detail on the quotation and order screen.
- For some models of tube fitting, the external appearance, shape, dimensions, and other features have been changed. Please refer to the product information for details.
Product Description
Quick connect fitting with outstanding operability.
[Features]
· Now 40% smaller by volume compared to standard type.
· Easy tube attachment and removal even with ultra compact size.
· The release ring uses a circular-shaped release ring.
· Water can also be used depending on conditions.
· High performance and high quality. Industry-leading variation.
· Allows for centralized piping.
[Applications]
· Ideal for fittings for general piping.
Drawing
Product Specification
Product Specification
Elbow
Screw to Tube Connection
| Operating fluid | Air, water (conditional*) |
|---|---|
| Maximum operating pressure | 1.0 MPa |
| Operating vacuum pressure | -100 kPa |
| Operating temperature range | 0 to 60℃ (no freezing) |
- *When using water as the operating fluid, be sure to observe the following conditions.
- 1.When using water, keep the surge pressure below the maximum operating pressure.
- 2.General tap water can be used. Please contact the manufacturer if other types of water are used.
- 3.Be sure to use an insert ring when using water.
Compatible Size
| Metric size (mm) | ⌀4, ⌀6, ⌀8, ⌀10, ⌀12, ⌀16 |
|---|---|
| Inch size | ⌀1/8, ⌀5/32, ⌀3/16, ⌀1/4, ⌀5/16, ⌀3/8, ⌀1/2, ⌀5/8 |
| Metric male thread | M5 x 0.8, M6 x 1 |
|---|---|
| Male tapered pipe thread | R1/8, R1/4, R3/8, R1/2 |
| Metric female thread | M5 x 0.8 |
| Female tapered pipe thread | Rc1/8, Rc1/4, Rc3/8, Rc1/2 |
Specifications Table
Metric size
| Type | Tube outer diameter ⌀D | R | A | B | L | ⌀p | Tube stop C | E | Width across flats H | Orifice diameter (⌀ mm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PL4-M5 (4) | 4 | M5 x 0.8 | 2.8 [3] | 16 | 18.2 [18] | 10 | 14.9 | 17.7 | 8 | 2.4 | 5.7 |
| PL4-M6 (4) | M6 x 1 | 3.8 | 20 | 21.2 | 18.7 | 10 | 2.8 | 8 | |||
| PL4-01 (4) | R1/8 | 8 | 22 | 23 | 2.8 | 10 | |||||
| PL4-02 (4) | R1/4 | 11 | 29 | 28 | 20.7 | 14 | 18 | ||||
| PL6-M5 (4) | 6 | M5 x 0.8 | 2.8 [3] | 19.5 | 23 [22.8] | 12.5 | 17 | 20.3 | 10 | 2.4 | 8.9 |
| PL6-M6 (4) | M6 x 1 | 3.8 | 20.5 | 23 | 3 | 8 | |||||
| PL6-01 (4) | R1/8 | 8 | 22.5 | 24.8 | 4.2 | 11 | |||||
| PL6-02 (4) | R1/4 | 11 | 28 | 28.2 | 21.8 | 14 | 4.3 | 19 | |||
| PL6-03 (4) | R3/8 | 12 | 31.5 | 31.4 | 23.8 | 17 | 30 | ||||
| PL8-01 (4) * | 8 | R1/8 | 8 | 24 | 27.3 | 14.5 | 18.1 | 22.7 | 12 | 6 | 14 |
| PL8-02 (4) * | R1/4 | 11 | 28 | 29.2 | 23.7 | 14 | 6.7 | 20 | |||
| PL8-03 (4) * | R3/8 | 12 | 31 | 31.9 | 24.7 | 17 | 31 | ||||
| PL10-01 (4) | 10 | R1/8 | 8 | 25 | 29.8 | 17.5 | 20.2 | 25.5 | 12 | 6 | 18 |
| PL10-02 (4) * | R1/4 | 11 | 28.5 | 31.2 | 26 | 14 | 8 | 23 | |||
| PL10-03 (4) * | R3/8 | 12 | 32 | 34.4 | 27 | 17 | 8.3 | 34 | |||
| PL10-04 (4) | R1/2 | 15 | 36 | 36.6 | 27.5 | 21 | 57 | ||||
| PL12-02 (4) | 12 | R1/4 | 11 | 29.8 | 34.2 | 21 | 23.4 | 29 | 14 | 8 | 27 |
| PL12-03 (4) | R3/8 | 12 | 32.5 | 36.7 | 29.7 | 17 | 10 | 38 | |||
| PL12-04 (4) | R1/2 | 15 | 36.5 | 38.8 | 30.7 | 21 | 10.3 | 61 | |||
| PL16-03 (4) | 16 | R3/8 | 11 | 47 | 53.2 | 25 | 24.1 | 33.1 | 22 | 11 | 74 |
| PL16-04 (4) | R1/2 | 15 | 51 | 55.3 | 13 | 79 |
- *1. In (4) in the type, if you want an external appearance color: other than black and regular packaging, select and enter the symbol from the following.
External appearance color: light gray / symbol: W, Packaging specification: cleanroom packaging specification / symbol: -C,
External appearance color: light gray & packaging specification: cleanroom packaging specification / symbol: W-C, Clean washing & packaging specification: clean room packaging specification / symbol: -UC - *2. L dimensions for tapered thread types are reference dimensions after tightening with screws.
- *3. For sizes marked with an asterisk (*), a space-saving type is also available.
- *4. Values in [ ] are for clean room packaging specification and clean washing specification.
- *5. The orifice diameter is calculated by converting the minimum flow path to its equivalent diameter.
Inch size
| Type | Tube outer diameter ⌀D | R | A | B | L | ⌀p | Tube stop C | E | Width across flats H | Orifice diameter (⌀ mm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PL5/32-M5 (4) | 5/32 | M5 x 0.8 | 2.8 [3] | 16 | 18.2 [18] | 10 | 14.9 | 17.7 | 8 | 2.4 | 5.7 |
| PL5/32-01 (4) | R1/8 | 8 | 22 | 23 | 18.7 | 10 | 2.8 | 10 | |||
| PL5/32-02 (4) | R1/4 | 11 | 29 | 28 | 20.7 | 14 | 18 | ||||
| PL3/16-M5(4) | 3/16 | M5 x 0.8 | 2.8 [3] | 19.5 | 23 [22.8] | 12.5 | 17.4 | 20.7 | 10 | 2.4 | 8.7 |
| PL3/16-01 (4) | R1/8 | 8 | 22.5 | 24.8 | 3.3 | 11 | |||||
| PL3/16-02 (4) | R1/4 | 11 | 28 | 28.2 | 22.2 | 14 | 19 | ||||
| PL1/4-M5 (4) | 1/4 | M5 x 0.8 | 2.8 [3] | 19.5 | 23 [22.8] | 12.5 | 17 | 20.3 | 10 | 2.4 | 8.5 |
| PL1/4-01 (4) | R1/8 | 8 | 22.5 | 24.8 | 4.6 | 11 | |||||
| PL1/4-02 (4) | R1/4 | 11 | 28 | 28.2 | 21.8 | 14 | 5.3 | 18 | |||
| PL1/4-03 (4) | R3/8 | 12 | 31.5 | 31.4 | 23.8 | 17 | 29 | ||||
| PL5/16-01 (4) | 5/16 | R1/8 | 8 | 24 | 27.3 | 14.5 | 18.1 | 22.7 | 12 | 6 | 14 |
| PL5/16-02 (4) | R1/4 | 11 | 28 | 29.2 | 23.7 | 14 | 6.7 | 20 | |||
| PL5/16-03 (4) | R3/8 | 12 | 31 | 31.9 | 24.7 | 17 | 31 | ||||
| PL3/8-01 (4) | 3/8 | R1/8 | 8 | 25 | 29.8 | 17.5 | 20.2 | 25.5 | 12 | 6 | 18 |
| PL3/8-02 (4) | R1/4 | 11 | 28.5 | 31.2 | 26 | 14 | 8 | 24 | |||
| PL3/8-03 (4) | R3/8 | 12 | 32 | 34.4 | 27 | 17 | 8.2 | 35 | |||
| PL3/8-04 (4) | R1/2 | 15 | 36 | 36.6 | 27.5 | 21 | 58 | ||||
| PL1/2-02 (4) | 1/2 | R1/4 | 11 | 29.8 | 34.2 | 21 | 23.7 | 29.3 | 14 | 8 | 26 |
| PL1/2-03 (4) | R3/8 | 12 | 32.5 | 36.7 | 30 | 17 | 10 | 37 | |||
| PL1/2-04 (4) | R1/2 | 15 | 36.5 | 38.8 | 31 | 21 | 10.9 | 60 | |||
| PL5/8-03 (4) | 5/8 | R3/8 | 11 | 47 | 53.2 | 25 | 24.1 | 33.1 | 22 | 11 | 74 |
| PL5/8-04 (4) | R1/2 | 15 | 51 | 55.3 | 13 | 79 |
- *1. In (4) in the type, if you want an external appearance color: other than black and regular packaging, select and enter the symbol from the following.
External appearance color: light gray / symbol: W, Packaging specification: cleanroom packaging specification / symbol: -C,
External appearance color: light gray & packaging specification: cleanroom packaging specification / symbol: W-C, Clean washing & packaging specification: clean room packaging specification / symbol: -UC - *2. L dimensions for tapered thread types are reference dimensions after tightening with screws.
- *3. Values in [ ] are for cleanroom packaging specification and clean washing specification.
- *4. The orifice diameter is calculated by converting the minimum flow path to a diameter.
Usage Example
How To Attach And Detach The Connecting Part
1. How to attach/detach the tube
(1). Tube installation
The tube fitting (quick connect fitting) has a lock claw that secures the tube by simply inserting it to the tube stop, and an elastic sleeve that seals the circumference of the tube.
The tube fitting (quick connect fitting) has a lock claw that secures the tube by simply inserting it to the tube stop, and an elastic sleeve that seals the circumference of the tube.
(2). Tube removal
To remove the tube, push the release ring to open the lock claws and remove the tube. Be sure to stop the air before removing the tube.
To remove the tube, push the release ring to open the lock claws and remove the tube. Be sure to stop the air before removing the tube.
2. Screw Tightening Method
(1). Screw tightening
There are two types of screw tightening: one that tightens the hexagonal outer diameter with a wrench or impact wrench, and one that tightens the hexagonal inner diameter with a hex key (a small space between fittings can be taken).
There are two types of screw tightening: one that tightens the hexagonal outer diameter with a wrench or impact wrench, and one that tightens the hexagonal inner diameter with a hex key (a small space between fittings can be taken).