Keyless Timing Pulleys - T10 - MechaLock Standard Type Incorporated (with Centering Function)
Caution
- Regarding RoHS compliance: The products are RoHS non-compliant only when alteration BMC is selected. The products are RoHS-compliant when BMC is not selected. As some parts used in the alteration are RoHS non-compliant, the RoHS notation on this page has been changed to non-compliant. "Non-compliant" is also indicated in the certificate due to information on the left.
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Product Description
[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bushing: S45C equivalent
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black oxide
[Related Products]
· Timing belt High Torque Timing Belt, High Torque Timing Belts with Attachment, Long Timing Belts-Iron Rubber, Long Timing Belts-Polyurethane, Open End Belt Iron RubberOpen End Belts/Polyurethane/Chloroprene Rubber
· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing
| Dimension Range | Tolerance (mm) | |
| Over | or Less | |
| 0.5 | 3 | ±0.1 |
| 3 | 6 | ±0.1 |
| 6 | 30 | ±0.2 |
| 30 | 120 | ±0.3 |
| 120 | 400 | ±0.5 |
*3 For the combination of nominal width and MechaLock inner diameter shown in Table 2, the MechaLock mounting holes are not stepped holes, but are through holes of the MechaLock outer diameter. ([!] Shape E only)
[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] Machined flange for 34, 50 and 60 toothed pulleys.
[ ! ] For orders with no flange, please specify the alteration NFC.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
Table 1: Select Shaft Bore Dia.
| dH7 | Max. allowable torque (N⋅m) | D1 | (L) | |
| HTTA ·HTTK ·HTTT | HTTAS | |||
| 12 | 44.1 | 24.5 | 28.5 | 6.5 |
| 14 | 63.7 | 28.4 | 30.5 | |
| 15 | 80.4 | 30.4 | 31.5 | |
| 16 | 83.3 | — | 33.0 | |
| 17 | 92.2 | — | 33.5 | |
| 18 | 95.1 | — | 34.5 | |
| 19 | 98.1 | — | 35.5 | |
| 20 | 216.0 | 122 | 42.0 | 8.0 |
| 22 | 255.0 | — | 44.0 | |
| 24 | 363.0 | — | 46.0 | |
| 25 | 392.0 | 153 | 47.0 | |
| 28 | 441.0 | — | 50.0 | 8.5 |
| 30 | 500.0 | 230 | 52.0 | |
| 32 | 530.0 | — | 54.0 | |
| 35 | 883.0 | — | 62.0 | 10.0 |
| 40 | 1,079.0 | — | 67.0 | |
| 45 | 1,285.0 | — | 72.0 | |
| 50 | 1,706.0 | — | 77.0 | 10.5 |
Table 2: pulley through hole combination
| Nominal Width | MechaLock inner dia. dH7 |
| T10150 | 20·22 |
| T10200 | 35 |
■Mechalock bolt tightening torque (N⋅m)
| type | MLM | MLHS |
| d | ||
| 6 | 3.9 | 2.7 |
| 8 | ||
| 10 | ||
| 12 | ||
| 14 | ||
| 15 | ||
| 16 | ||
| 17 | ||
| 18 | ||
| 19 |
| type | MLM | MLHS |
| d | ||
| 20 | 8.8 | 5.6 |
| 22 | ||
| 24 | ||
| 25 | ||
| 28 | ||
| 30 | ||
| 32 | ||
| 35 | 15.7 | 9.6 |
| 38 | ||
| 40 | ||
| 42 | ||
| 45 | ||
| 48 | ||
| 50 |
■Belt Nominal Width / Dimensions
| mm | Nominal | |||||
| T10150 | T10200 | T10250 | T10300 | T10400 | T10500 | |
| A | 17 | 22 | 27 | 32 | 43 | 53 |
| W | 22 | 27 | 32 | 37 | 48 | 58 |
| Y | - | 18 | 22(up to d22) 23.5（d24 or more） | 24(up to d22) 25（d24 to 32） 27（d35 or more） | 30（up to d22） 31（d24 to 32） 34（d35 or more） | 35（up to d22） 36(d24 to 32) 39（d35 or more） |
| HHTA | HHTK | HHTAS | HTTT |
| MLM | MLHS | MLM | |
| Type | Belt Width | [M]Material*1 | [S] Surface Treatment | |||||||||
| 15 mm | 20 mm | 25 mm | 30 mm | 40 mm | 50 mm | Pulley | Flange | MechaLock | Pulley | Flange | MechaLock | |
| T10150 | T10200 | T10250 | T10300 | T10400 | T10500 | |||||||
| HTTA | ● | ● | ● | ● | ● | ● | Extra Super Duralumin Aluminum alloy | Aluminum alloy | S45C equivalent | Clear Anodize | — | |
| HTTK | ● | ● | ● | ● | — | — | Hard Clear Anodized *2 | — | ||||
| HTTAS | ● | ● | ● | ● | ● | ● | SUS304 Equivalent | Clear Anodize | — | |||
| HTTT | ● | ● | ● | ● | ● | ● | S45C Equivalent | SPCC | S45C Equivalent | — | ||
*2 Hard clear anodize: film hardness 300 HV or more