Keyless Timing Pulleys - T5

Brand :

MISUMI

Caution

Regarding RoHS compliance: The products are RoHS non-compliant only when alteration BMC is selected. The products are RoHS-compliant when BMC is not selected. As some parts used in the alteration are RoHS non-compliant, the RoHS notation on this page has been changed to non-compliant. "Non-compliant" is also indicated in the certificate due to information on the left.
Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Product Description

[Material]
· Pulley: Extra super duralumin aluminum alloy
· Flange: Aluminum alloy
· Bushing: S45C equivalent
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~)
[Related Products]
· Timing belt High Torque Timing Belt, High Torque Timing Belts with Attachment, Long Timing Belts-Iron Rubber, Long Timing Belts-Polyurethane, Open End Belt Iron Rubber Open End Belts/Polyurethane/Chloroprene Rubber
· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing

■T5

● Pulley Shape

Shape E

Shape F

Standard Tooth Profile

Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 5.0mm)

Table 1: Select Shaft Bore Dia.

d_H7	Max. Torque N⋅m		D		(L)
d_H7	ST Bushing	SH Bushing	ST Bushing	SH Bushing	(L)
8	16	8.5	25.5	24.5	8.5
10	39	18	30	29	10.5
11	43	20	31	30
12	48	23	32	31
14	73	37	35	36	12
15	78	39	36	37	12
16	83	42	37	38	13
17	88	45	38	39	13
18	154	48	43	40	14
19	163	49	45	42
20	171	97	46	46
22	186	110	48	47
24	206	121	50	49
25	216	124	52	51
28	353	141	54	53	15.5
30	382	149	57	56	15.5
32	412	163	59	58	16.5
35	451	173	63	61	16.5
38	686	—	70	—	19
40	725	—	71	—	19

[ ! ] Surface treatment may not be applied to the shaft bores.
[!] Two types of bushings are available: standard type (ST bushings) and short type (SH bushings).
[ ! ] Electroless nickel plated bushing (alterations BMC, BMR) decreases maximum allowable torque and allowable thrust load by 20 to 30%.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

Type	Belt Width				[M]Material^*1			[S] Surface Treatment
	10 mm	15 mm	20 mm	25 mm	Pulley	Flange	Bushing	Pulley	Flange	Bushing
	T5100	T5150	T5200	T5250
TTLA	●	●	●	●	Extra Super Duralumin Aluminum alloy	Aluminum alloy	S45C Equivalent	Clear Anodize		—
TTLK	●	●	●	●				Hard Clear Anodized ^*2		—

*1The above materials and accessories might be changed to the ones equivalent to the originals. *2 Hard clear anodize: film hardness 300 HV or more

■Belt Nominal Width / Dimensions

mm	Nominal
mm	T5100	T5150	T5200	T5250
A	11	17	22	27
W	16	22	27	32

Keyless Timing Pulleys - T5

Caution

Product Description

Chat with MISUMI

Service hours

Noted for use