Keyless Timing Pulleys - XL
Brand :
MISUMI
Caution
- Regarding RoHS compliance: The products are RoHS non-compliant only when alteration BMC is selected. The products are RoHS-compliant when BMC is not selected. As some parts used in the alteration are RoHS non-compliant, the RoHS notation on this page has been changed to non-compliant. "Non-compliant" is also indicated in the certificate due to information on the left.
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Product Description
[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bushing: S45C equivalent
[Surface treatment]
· Clear anodize, black oxide
[Related Products]
· Timing belt High Torque Timing Belt, Long Timing Belts-Iron Rubber, Open End Belt Iron RubberOpen End Belts/Polyurethane/Chloroprene Rubber
· Idler Idler with Teeth Center Bearing, Idler with Teeth Both Sides Bearing, Idler - Backside Tensioning Center Bearing, Idler - Backside Tensioning Both Sides Bearing
■XL
● Pulley Shape
Shape E
Shape F
Tooth Profile (ISO Standard Rack Dimensions)
Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 5.08 mm)
Table 1: Select Shaft Bore Dia.
| dH7 | Max. allowable torque N⋅m | D | (L) | ||
| ST Bushing | SH Bushing | ST Bushing | SH Bushing | ||
| 8 | 16 | 8.5 | 25.5 | 24.5 | 8.5 |
| 10 | 39 | 18 | 30 | 29 | 10.5 |
| 11 | 43 | 20 | 31 | 30 | |
| 12 | 48 | 23 | 32 | 31 | |
| 14 | 73 | — | 35 | — | 12 |
| 15 | 78 | 36 | |||
| 16 | 83 | 37 | 13 | ||
| 17 | 88 | 38 | |||
| 18 | 154 | 43 | 14 | ||
| 19 | 163 | 45 | |||
| 20 | 171 | — | 46 | — | 14 |
| 22 | 186 | 48 | |||
| 24 | 206 | 50 | |||
| 25 | 216 | 52 | |||
| 28 | 353 | 54 | 15.5 | ||
| 30 | 382 | 57 | |||
| 32 | 412 | 59 | 16.5 | ||
[ ! ] Surface treatment may not be applied to the shaft bores.
[!] Two types of bushings are available: standard type (ST bushings) and short type (SH bushings).
[ ! ] Electroless nickel plated bushing (alterations BMC, BMR) decreases maximum allowable torque and allowable thrust load by 20 to 30%.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
| Type | Part number | [M]Material *1 | [S] Surface Treatment | ||||
| Belt Width: 12.7 mm (1/2 in) | Pulley | Flange | Bushing | Pulley | Flange | Bushing | |
| XL050 | |||||||
| MTPLA | ● | Extra Super Duralumin Aluminum Alloy | Aluminum alloy | S45C Equivalent | Clear Anodize | — | |
| MTPL | ● | S45C Equivalent | SPCC | S45C Equivalent | Black Oxide Coating | ||