OMRON Terminal Extraction Tools
Terminal removal tools are tools used to remove the fittings (terminals) installed at current inlets and outlets of electric machinery or electrical devices, or installed in locations connected to other electrical devices. A terminal removal tool is used in the connector area where a harness is inserted. If a harness is mistakenly inserted into the insertion section of a connector, the crimping that prevents removal is applied and the harness can not be easily removed. In this case, using the terminal removal tool enables the fitting to be removed without crushing or damaging the crimping. When removing a contact from a housing, use the connector removal tool. A wide variety of sizes are available that vary according to the outer diameter and inner diameter specifications. Select the tip size according to the type and diameter of the terminal to be removed.