(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
Brand |
|
---|---|
CAD |
|
From: ฿ 657.00 |
---|
Days to Ship: |
M Class Insert (with MV Breaker) DCMT○○○-MV【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 246.00 |
---|
Days to Ship: |
G Class Insert (with AZ Breaker) DCGT○○○-AZ【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 408.00 |
---|
Days to Ship: |
G Class Insert (with F Breaker) CCGT○○○L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with MP Breaker) DNMG○○○○○○-MP
MITSUBISHI MATERIALS
An M-class insert that achieves good chip control, low cutting heat, and high wear resistance in a wide range of areas due to its original chipbreaker shape.
[Features]
- 55° rhombus, negative insert, with holes,
chip control follows changes in depth of cut, feed, and cutting speed.-
Greatly improves productivity.-
Controls crater wear due to low cutting heat. The temperature of the work material is also reduced
・Stable cutting of steel for UE6105・MC6115・MC6015 (reference for cutting condition)
・General cutting for MP3025・UE6110 for steel and UC5115 for cast iron (reference for cutting condition)
[Use]
・Medium cutting Optimal for processing where cutting conditions such as depth of cut, feed amount, and cutting speed fluctuate greatly in applications
, turning , and profiling.
From: ฿ 326.00 |
---|
Days to Ship: |
M Class Insert (with MJ Breaker) DNMG-MJ
MITSUBISHI MATERIALS
From: ฿ 447.00 |
---|
Days to Ship: |
From: ฿ 574.30 |
---|
Days to Ship: |
M Class Insert (with SV Breaker) DCMT○○○-SV
MITSUBISHI MATERIALS
M-class insert (with SV breaker) DCMT○○○-SV.
[Features]
- 55° diamond shape, positive insert, with hole.
・Large rake angle for excellent sharpness.
・The peninsula dot reliably controls chips even when cutting 1 mm or less.
· US7020 is for stainless steel, and NX2525 is for stable cutting of steel, stainless steel, and cast iron (reference for cutting conditions).
[Applications]
- Interpolation breaker for turning carbon steel, alloy steel, mild steel, and stainless steel, and for light cutting.
From: ฿ 266.00 |
---|
Days to Ship: |
M-Class Insert (Without Breaker) DCMW○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without chipbreaker) DCMW○○○.
[Features]
- Flat top.
· 55° diamond shape, positive insert, with hole.
· UC5105 is for stable cutting of cast iron (a guideline for cutting conditions).
· MC5005 and UC5115 are for general cutting of cast iron (reference for cutting conditions).
・HTi10 can be used for general cutting of cast iron, non-ferrous metals, heat-resistant alloys, and titanium alloys (reference for cutting conditions).
[Applications]
・Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
・Breaker for turning and rough cutting of cast iron.
From: ฿ 266.00 |
---|
Days to Ship: |
M Class Insert (with Breaker) DCMT○○○
MITSUBISHI MATERIALS
From: ฿ 203.00 |
---|
Days to Ship: |
M Class Insert (with Breaker without Code) DNMG○○○
MITSUBISHI MATERIALS
First recommendation for medium cutting of cast iron, alternate chipbreaker for medium cutting of carbon steel and alloy steel.
[Features]
・M-class double-sided chip breaker
・High cutting edge strength with a flat land blade type
・Highly versatile all-round breaker shape
・HTI10 can be used for general cutting (cutting conditions) for cast iron, non-ferrous metals, heat-resistant alloys, titanium alloys. Standard)
・UE6110 and MC6015 are steel, general cutting (standard cutting condition)
・UC5105 is cast iron, MC6115 and UE6105 are steel, stable cutting (standard cutting condition)
・NX3035 and MP3025 are steel, UC5115 is cast iron General cutting (guideline for cutting conditions)
・NX2525 is for stable cutting (guideline for cutting conditions) in steel, stainless steel, and cast iron
[Uses]
・For lathe turning of cast iron, medium cutting of carbon steel and alloy steel
From: ฿ 326.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) BF-CNGG○○○TA4
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G-Class Insert (New Petit Cut) NP-DCGW○○○○○2
MITSUBISHI MATERIALS
From: ฿ 2,620.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) TNP-DCGW○○○G2
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
From: ฿ 789.00 |
---|
Days to Ship: |
M Class Insert (with FM Breaker) DCMT○○○-FM【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 4,890.00 |
---|
Days to Ship: |
M-Class Insert (With LM Breaker) DCMT○○○-LM
MITSUBISHI MATERIALS
From: ฿ 244.00 |
---|
Days to Ship: |
M Class Insert (with LP Breaker) DNMG○○○-LP
MITSUBISHI MATERIALS
First recommended breaker M class insert for light cutting of carbon steel and alloy steel (with LP breaker) DNMG○○○-LP.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker- Achieves
stable chip disposal in the light cutting area-
Curved cutting edge enables smooth chip discharge-
UE6105 made of steel- MC6115 for stable cutting, UE6110, MC6015, MP3025 for general cutting (guidelines for cutting conditions)
[Applications]
- For turning carbon steel and alloy steel, light cutting
From: ฿ 326.00 |
---|
Days to Ship: |
M Class Insert (with SA Breaker) DNMG○○○○○○-SA
MITSUBISHI MATERIALS
M-class insert for light cutting of carbon steel and alloy steel (with SA breaker) DNMG○○○○○○-SA.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker-
Excellent chip control on the low feed side within the light cutting range- Waveform
cutting edge ideal for copying and pulling-up work- Machining
Recommended for materials with a hardness of 200-300HB.
・For steel, UE6105 and MC6115 are for stable cutting.For UE6110, MC6015, and NX3035 are for general cutting (guidelines for cutting conditions).
・For steel, stainless steel, and cast iron, NX2525 is for stable cutting.
[Applications]
・Carbon steel・For turning alloy steel and light cutting
From: ฿ 326.00 |
---|
Days to Ship: |
E-Class Insert (With SN Breaker) DCET R / L-SN
MITSUBISHI MATERIALS
From: ฿ 557.00 |
---|
Days to Ship: |
G Class Insert (with SMG Breaker) DCGT○○○M-SMG【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 8,364.00 |
---|
Days to Ship: |
G Class Insert (for Aluminum Tool Bit) DEGX○○○R/L
MITSUBISHI MATERIALS
From: ฿ 1,021.00 |
---|
Days to Ship: |
G-Class Insert (New Petit Cut) NP-DNGA○○○○2
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with MA Breaker) DNMG○○○○○○-MA【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
Interpolation M-class insert for finishing and light cutting of cast iron (with MA breaker) DNMG○○○○○○-MA.
[Features]
・M-class double-sided chip breaker
・Ideal for general-purpose areas
・Positive land blade shape for excellent sharpness
・55° rhombus, negative insert, with hole
・UE6105 is steel, US7020 is stainless steel, MC5005 and UC5105 are cast iron , Stable cutting (reference for cutting condition)
・UE6110, MC6015, MP3025, NX3035 are for general cutting with steel (reference for cutting condition)
・UC5115・MC5015 are for general cutting with cast iron (reference for cutting condition)
・MC7025 is for stainless steel General cutting (guideline for cutting conditions)
・MC6115 is for stable cutting of steel and cast iron (guideline for cutting conditions)
[Applications]
・For turning cast iron and finishing/light cutting
From: ฿ 320.00 |
---|
Days to Ship: |
E Class Insert (with SR Breaker) DCET○○○R/L-SR
MITSUBISHI MATERIALS
From: ฿ 557.00 |
---|
Days to Ship: |
G Class Insert (with SN Breaker) DCGT○○○R-SN【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 6,620.00 |
---|
Days to Ship: |
G-Class Insert (New Petit Cut) NP-DCGW○○○○○
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G-Class Insert (New Petit Cut) NP-DNGA○○○○○4
MITSUBISHI MATERIALS
From: ฿ 3,257.00 |
---|
Days to Ship: |
M Class Insert (with FH Breaker) DNMG○○○-FH
MITSUBISHI MATERIALS
M-class insert for finish cutting of carbon steel, alloy steel and stainless steel (with FH breaker) DNMG○○○-FH.
[Features]
- M-class double-sided chip breaker.
・Achieves stable chip control with low depth of cut and low feed.
· 55° rhombus, negative insert, with hole.
· UE6110, NX3035, and MP3025 are for general cutting of steel (reference for cutting conditions).
· NX2525 and AP25N provide stable cutting of steel, stainless steel, and cast iron (reference for cutting conditions).
[Use]
・Finishing for turning carbon steel, alloy steel, and stainless steel.
From: ฿ 447.00 |
---|
Days to Ship: |
M Class Insert (with FV Breaker) DCMT○○○-FV【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 3,400.00 |
---|
Days to Ship: |
M-Class Insert (With MM Breaker) DCMT○○○-MM
MITSUBISHI MATERIALS
From: ฿ 244.00 |
---|
Days to Ship: |
M-Class Insert (With MS Breaker) DNMG○○○-MS【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
Chipbreaker DNMG○○○-MS is ideal for high-precision machining of difficult-to-cut materials.
[Features]
- 55° diamond shape, negative insert, with hole.
・M-class double-sided chipbreaker, non-grinding outer circumference.
・Sharp sharpness reduces cutting resistance.
・Double rake angle reduces the contact area between the rake face and chips.
・Reduces generation of cutting heat.
[Use]
・Ideal for medium cutting of hard-to-cut materials.
From: ฿ 447.00 |
---|
Days to Ship: |
M Class Insert (with SH Breaker) DNMG○○○○○○-SH
MITSUBISHI MATERIALS
M grade insert (with SH breaker) DNMG○○○○○○-SH.
[Features]
・55°rhombic, negative insert, with hole
・M-class double-sided chip breaker
・Low depth of cut in the light cutting area・Ideal for high feed areas
・Smooth chip discharge is possible with the curved cutting edge
・Work material hardness Recommended
for 160-250HB・NX2525・AP25N for stable cutting of steel, stainless steel and cast iron, UE6105・MC6115 for steel (guidelines for cutting conditions)
・NX3035・MC6015・UE6110 for steel, UC5115 for general cutting (cutting conditions ) for steel [
Use]
・For turning carbon steel and alloy steel, light cutting
From: ฿ 326.00 |
---|
Days to Ship: |
G Class Insert (with MJ Breaker) DNGM○○○○○○-MJ
MITSUBISHI MATERIALS
From: ฿ 718.00 |
---|
Days to Ship: |
From: ฿ 7,280.00 |
---|
Days to Ship: |
E Class Insert (with SN Breaker) DCET○○○RW-SN
MITSUBISHI MATERIALS
From: ฿ 718.00 |
---|
Days to Ship: |
G Class Insert (with FJ Breaker) DNGG○○○-FJ
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (with F Breaker) DCGT○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (with SN Breaker) DCGT○○○L-SN
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (with SS Breaker) DCGT○○○R/L-SS
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (for Aluminum Tool Bit) DEGX○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) BF-DCGT○○○TA2/TS2
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) BF-DNGG○○○TA4
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) BF-DNGM○○○TA2/TS2
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) NP-CNGA○○○○○4
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G-Class Insert (New Petit Cut) NP-DNGA○○○GAWS2JR/L
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (New Petit Cutter) TNP-DNGA○○○○2
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
G Class Insert (Controllable Breaker) DNGG○○○R/L
MITSUBISHI MATERIALS
From: ฿ 900.00 |
---|
Days to Ship: |
M Class Insert (with C Breaker) DNMG○○○○○○-C
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with FS Breaker) DNMG○○○-FS
MITSUBISHI MATERIALS
M-class insert for finish cutting of mild steel (with FS breaker) DNMG○○○-FS.
[Features]
- M-class double-sided chip breaker.
・Achieves stable chip control with low depth of cut and low feed.
・Sharp blade with good cutting performance.
・The straight cutting edge reduces burrs.
· 55° rhombus, negative insert, with hole.
・The NX2525 provides stable cutting of steel, stainless steel, and cast iron (reference for cutting conditions).
[Use]
・For finish turning of mild steel.
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with FY Breaker) DNMG○○○-FY
MITSUBISHI MATERIALS
Geometry for low carbon steel finishing with FY geometry.
[Features]
- 55° diamond shape, negative insert, with hole.
・Stable chip curl created by steep walls.
・Achieves outstanding chip disposal with iron plate materials and low-carbon steel materials.
- Reliable curling even in profiling machining due to the use of a wave-shaped cutting edge.
[Applications]
・Ideal for finish turning for low carbon steel.
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with GH Breaker) DNMG○○○-GH
MITSUBISHI MATERIALS
First recommended chipbreaker for rough cutting of cast iron DNMG○○○-GH.
[Features]
- 55° rhombus, negative insert, with hole-
M-class double-sided chip breaker-
Suitable for intermittent cutting and black scale cutting-
High feed possible due to combination of wide land and large chip
pocket- UE6105 is steel, UC5105 is cast iron , MC6115 for stable cutting of steel and cast iron (a guideline for cutting conditions)
・UE6110 for general cutting of steel and UC5115 for cast iron (a guideline for cutting conditions)
[Applications]
・For turning and roughing of cast iron
From: ฿ 326.00 |
---|
Days to Ship: |
M Class Insert (with GJ Breaker) DNMG○○○-GJ
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with GM Breaker) DNMG○○○○○○-GM
MITSUBISHI MATERIALS
From: ฿ 320.00 |
---|
Days to Ship: |
M Class Insert (with HZ Breaker) DNMM○○○-HZ
MITSUBISHI MATERIALS
DNMM○○○-HZ, a specialist in heavy-duty machining of carbon steel and alloy steel.
[Features]
- 55° rhombus, negative insert, with
hole- Assist breaker for carbon steel and alloy steel-
Low resistance type with the best sharpness-
Teardrop-shaped dots for good chip disposal in a wide range
[Applications]
・For heavy-duty turning
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (with LM Breaker) DNMG○○○○○○-LM【1-10 Pieces Per Package】
MITSUBISHI MATERIALS
From: ฿ 262.00 |
---|
Days to Ship: |
M Class Insert (with LM Breaker) DNMG-LM
MITSUBISHI MATERIALS
From: ฿ 262.00 |
---|
Days to Ship: |
M Class Insert (with MH Breaker) DNMG○○○-MH
MITSUBISHI MATERIALS
Interpolation M grade insert for medium cutting of alloy steel (with MH breaker) DNMG○○○-MH.
[Features]
・M-class double-sided chip breaker
・Flatland blade type with high cutting edge strength
・Good chip control with moderate chip pocket
・55°rhombic shape, negative insert, with hole
・UE6105 is steel, US7020 is stainless steel Stable cutting (reference for cutting condition)
・UE6110, MC6015, MC6115 are for general cutting of steel (reference for cutting condition)
[Applications]
・Carbon steel. For turning alloy steel and medium cutting
From: ฿ 326.00 |
---|
Days to Ship: |
M Class Insert (with MM Breaker) DNMG○○○○○○-MM
MITSUBISHI MATERIALS
From: ฿ 320.00 |
---|
Days to Ship: |
M Class Insert (with RM Breaker) DNMG○○○-RM
MITSUBISHI MATERIALS
From: ฿ 320.00 |
---|
Days to Ship: |
M Class Insert (with RP Breaker) DNMG○○○-RP
MITSUBISHI MATERIALS
M-class insert for rough cutting of carbon steel and alloy steel (with RP breaker) DNMG○○○-RP.
[Features]
・55°rhombic, negative insert, with hole
・M-class double-sided chip breaker
・Suitable for interrupted cutting and black
scale cutting・Realizes a tough cutting edge and low cutting resistance due to the optimum rake
angle・UE6105・MC6115 for steel is for stable cutting, while UE6110 and MC6015 are for general cutting (guidelines for cutting conditions)
[Use] - For
turning and rough cutting of carbon steel and alloy steel
From: ฿ 326.00 |
---|
Days to Ship: |
M Class Insert (with SW Breaker) DNMX○○○○○○-SW
MITSUBISHI MATERIALS
Insert with wiper for light cutting of carbon steel, alloy steel, mild steel, and stainless steel DNMX○○○○○○-SW.
[Features]
- 55° diamond shape, negative insert, with hole.
・The high-efficiency insert that maintains surface roughness even when the feed rate is increased enables roughing and finishing in one shot.
・Sharpness is improved with a positive land suitable for inner diameter machining. Prevent chatter.
・Wide chip pocket prevents chip clogging.
[Use]
・For light cutting.
From: ฿ 447.00 |
---|
Days to Ship: |
M Class Insert (with SY Breaker) DNMG○○○○○○-SY
MITSUBISHI MATERIALS
Chipbreaker for medium finishing of low carbon steel.
[Features]
- DNMG○○○○○○-SY.
· 55° rhombus, negative insert, with hole.
・A steep wall?
· Achieves outstanding chipping treatment for iron plate materials and low-carbon steel materials.
[Applications]
・Ideal for semi-finish turning for low carbon steel.
From: ฿ 447.00 |
---|
Days to Ship: |
M Class Insert (New Petit Cutter) NP-DCMT○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 2,179.00 |
---|
Days to Ship: |
M Class Insert (New Petit Cutter) NP-DCMW○○○○○
MITSUBISHI MATERIALS
From: ฿ 1,103.00 |
---|
Days to Ship: |
M-Class Insert (New Petit Cut) NP-DNMA○○○○
MITSUBISHI MATERIALS
From: ฿ 891.02 |
---|
Days to Ship: |
M Class Insert (New Petit Cutter) NP-DNMM○○○R/L-F
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M Class Insert (No Breaker) DNMA○○○
MITSUBISHI MATERIALS
M-class insert for rough cutting of cast iron (without breaker) DNMA○○○.
[Features]
- Flat top.
· Ideal for unstable cutting such as intermittent cutting due to high cutting edge strength and stable seating.
[Use]
・Breaker for turning and rough cutting of cast iron.
From: ฿ 489.00 |
---|
Days to Ship: |
M Class Insert 55°, DN with Hole, ○○-Type DNMG-LS
MITSUBISHI MATERIALS
From: ฿ 999,999,999.00 |
---|
Days to Ship: |
M-Class Insert 55°, DN With Hole, ○○-Type DNMG-RS
MITSUBISHI MATERIALS
From: ฿ 447.00 |
---|
Days to Ship: |
Brand |
---|
Product Series |
From |
Days to Ship |
Shape |
work material |
Application |
Available corners |
Breaker Use |
Rake angle |
Nose R |
Selfishly |
Groove Width (For Grooving / Plunging) |
Pitch (for Threading) |
O.D./ I.D. (For Threading) |
Screw Types (for threading) |
Number of threads (for threading) |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
Brand | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS |
Product Series | M Class Insert (with MV Breaker) DCMT○○○-MV【1-10 Pieces Per Package】 | G Class Insert (with AZ Breaker) DCGT○○○-AZ【1-10 Pieces Per Package】 | M Class Insert (with FM Breaker) DCMT○○○-FM【1-10 Pieces Per Package】 | G Class Insert (with SMG Breaker) DCGT○○○M-SMG【1-10 Pieces Per Package】 | M Class Insert (with MA Breaker) DNMG○○○○○○-MA【1-10 Pieces Per Package】 | G Class Insert (with SN Breaker) DCGT○○○R-SN【1-10 Pieces Per Package】 | M Class Insert (with FV Breaker) DCMT○○○-FV【1-10 Pieces Per Package】 | M-Class Insert (With MS Breaker) DNMG○○○-MS【1-10 Pieces Per Package】 | M Class Insert (with LM Breaker) DNMG○○○○○○-LM【1-10 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
From | ฿ 657.00 | ฿ 246.00 | ฿ 408.00 | ฿ 999,999,999.00 | ฿ 326.00 | ฿ 447.00 | ฿ 574.30 | ฿ 266.00 | ฿ 266.00 | ฿ 203.00 | ฿ 326.00 | ฿ 999,999,999.00 | ฿ 2,620.00 | ฿ 999,999,999.00 | ฿ 789.00 | ฿ 4,890.00 | ฿ 244.00 | ฿ 326.00 | ฿ 326.00 | ฿ 557.00 | ฿ 8,364.00 | ฿ 1,021.00 | ฿ 999,999,999.00 | ฿ 320.00 | ฿ 557.00 | ฿ 6,620.00 | ฿ 999,999,999.00 | ฿ 3,257.00 | ฿ 447.00 | ฿ 3,400.00 | ฿ 244.00 | ฿ 447.00 | ฿ 326.00 | ฿ 718.00 | ฿ 7,280.00 | ฿ 718.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 900.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 999,999,999.00 | ฿ 326.00 | ฿ 999,999,999.00 | ฿ 320.00 | ฿ 999,999,999.00 | ฿ 262.00 | ฿ 262.00 | ฿ 326.00 | ฿ 320.00 | ฿ 320.00 | ฿ 326.00 | ฿ 447.00 | ฿ 447.00 | ฿ 2,179.00 | ฿ 1,103.00 | ฿ 891.02 | ฿ 999,999,999.00 | ฿ 489.00 | ฿ 999,999,999.00 | ฿ 447.00 |
Days to Ship | 15 Day(s) | 15 Day(s) | 11 Day(s) | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | 16 Day(s) | Quote | 15 Day(s) | 11 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 11 Day(s) | 15 Day(s) | Quote | 11 Day(s) | 15 Day(s) | 16 Day(s) | Quote | 15 Day(s) | 15 Day(s) | 11 Day(s) | 1 Day(s) | 11 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 1 Day(s) | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | Quote | 15 Day(s) | Quote | Quote | Quote | 15 Day(s) | Quote | 15 Day(s) | Quote | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | 15 Day(s) | Quote | 15 Day(s) | Quote | 15 Day(s) |
Shape | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) |
work material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel | Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | High Hardness Material | Steel / Cast Iron / Non-ferrous metal / High Hardness Material | High Hardness Material | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / High Hardness Material | High Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Non-ferrous metal | High Hardness Material | Cast Iron / Non-ferrous metal / High Hardness Material | Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy | Heat-resistant alloy, titanium alloy |
Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - |
Available corners | - | - | - | - | - | - | - | - | 1 | - | - | 4 | 2 | 2 | - | - | - | - | - | - | - | - | 2 | - | - | - | 1 | 4 | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 2 | 4 | 2 | 4 | 2 | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 | 1 | 1 | 1 | - | - | - |
Breaker Use | Medium grinding | Medium grinding | Finish | Finish | Medium grinding | - | - | Light Cutting | - | Medium grinding | Medium grinding | - | - | - | - | Finish | - | Light Cutting | Light Cutting | Medium grinding | Medium grinding | Medium grinding | - | Medium grinding | Medium grinding | Medium grinding | - | - | Finish | Finish | Medium grinding | Medium grinding | Light Cutting | - | - | Medium grinding | Finish | Finish | Medium grinding | Medium grinding | Finish | - | - | - | - | - | - | Medium grinding | - | Finish | Finish | Rough cutting | - | Medium grinding | Heavy cutting | - | - | Medium grinding | Medium grinding | - | Rough cutting | Light Cutting | Light Cutting | - | - | - | - | - | Light Cutting | Rough cutting |
Rake angle | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Negative | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Negative | Negative | Negative | Negative | Negative |
Nose R | 0.2 ~ 0.4 | 0.2 ~ 0.8 | 0.2 ~ 0.8 | - | 0.4 ~ 1.6 | 0.4 ~ 1.6 | - | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.2 ~ 0.8 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.8 ~ 1.2 | - | 0.4 ~ 0.8 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.2 | 0.2 ~ 0.4 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 ~ 1.2 | 0.8 ~ 1.6 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.4 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.6 | 0.8 ~ 1.6 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.2 ~ 0.4 | 0.4 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 ~ 1.6 |
Selfishly | Right-hand / Left-hand | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Right-hand / Left-hand | - | Right-hand / Left-hand | - | - | Right-hand / Left-hand | Right-hand | - | - | - | - | - | - | - | - | - | Right-hand / Left-hand | - | Right-hand / Left-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | - | - | - | - | Right-hand / Left-hand | - | Right-hand / Left-hand | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Right-hand / Left-hand | - | - | Right-hand / Left-hand | - | No-hand | - |
Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?