(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก
MISUMI Ejector Sleeves（Product composition：Single sleeve）
Configure
Specification/Dimensions
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
Material
- SKH51
- SKD61
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Product composition
- Single sleeve
-
Concentricity between the hole and shaft diameters
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
- -0.01/-0.03
-
Inner dia. tolerance
-
Surface treatment
- No
- Nitrided
-
Boring method
- Grinding
- Wire cutting & polishing
- Reaming
-
Tapered or not
- Yes
- No
-
Center pin tip shape
-
P (Tip diameter)(mm)
[2.5-8/0.01mm Unit(s)]
Brand |
|
|---|---|
| CAD |
|
- 16 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Short Ejector Sleeves (Bushings For Ejector Pins)
MISUMI
Short ejector sleeve (bush for ejector pin) with die steel SKD61 + nitriding, coaxiality ◎0.06, and 4mm collar thickness.Days to Ship: 
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, fixed shaft diameter/specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-
MISUMI
This is an ejector sleeve whose tip wall thickness can be set to a minimum of 0.6mm. Compared to regular products, this product allows you to select the length of the inner sliding part (S dimension) up to 50mm.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-
MISUMI
Die steel SKD61+ nitrided, coaxiality ◎0.06, collar thickness 4mm, fixed length type straight ejector sleeve.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejectr Sleeve M2 / Wall thickness 0.3mm / Taper type
MISUMI
This is an ejector sleeve that can be set to a thin wall with a minimum wall thickness of 0.3 mm at the tip. It has a tapered shape from the sliding part to the escape hole. In addition, the coaxiality is 0.003/0.005, making it a more accurate product than usual.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.03, collar thickness JIS, fixed shaft diameter/specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-
MISUMI
Die steel SKD61+ nitrided, coaxiality ◎0.03, collar thickness 4mm, fixed length type straight ejector sleeve.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, fixed length type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, fixed shaft diameter/specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-
MISUMI
If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact PM_BD@misumi.co.thDays to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Short Ejector Sleeves (Bushings for straight ejector pins)
MISUMI
This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
Straight ejector sleeve with die steel SKD61+ nitrided, coaxiality ◎0.03, collar thickness 4mm, fixed shaft diameter/specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, total length specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
MISUMI
This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. It has a tapered shape from the sliding part to the escape hole.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61+ nitriding, coaxiality ◎0.03, collar thickness 4mm, total length specified type.Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, total length specified type.Days to Ship:
5 Day(s)
5 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| D/P (Shaft diameter)(mm) |
| V (Hole diameter)(mm) |
| Material |
| Head thickness |
| Product composition |
| Concentricity between the hole and shaft diameters |
| Shaft diameter tolerance |
| Inner dia. tolerance |
| Surface treatment |
| Boring method |
| Tapered or not |
| Center pin tip shape |
| P (Tip diameter)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type- | Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type- | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type- | Straight Ejectr Sleeve M2 / Wall thickness 0.3mm / Taper type | Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type- | Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type- | Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type- | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | ||||||||||||||||
| Days to Ship | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) |
| D/P (Shaft diameter)(mm) | 4 ～ 10 | 3.5 ～ 20 | 3.2 ～ 14 | 4 ～ 16 | 2.5 ～ 8 | 3.5 ～ 10 | 4 ～ 10 | 4 ～ 20 | 3.5 ～ 20 | 3.2 ～ 14 | 2.5 ～ 8 | 3.5 ～ 10 | 4 ～ 20 | 3 ～ 8 | 4 ～ 10 | 4 ～ 16 |
| V (Hole diameter)(mm) | 1.5 ～ 8 | 1.5 ～ 16 | 0.8 ～ 12.2 | 1.5 ～ 12 | 1 ～ 7.4 | 1.5 ～ 7.9 | 1.5 ～ 8 | 1.5 ～ 15 | 1.5 ～ 16 | 0.8 ～ 12.2 | 1 ～ 6.8 | 1.5 ～ 8 | 1.5 ～ 15 | 1 ～ 6 | 1.5 ～ 8 | 1.5 ～ 12 |
| Material | SKD61 | SKD61 | SKH51 | SKD61 | SKH51 | SKD61 | SKD61 | SKD61 | SKD61 | SKH51 | SKH51 | SKD61 | SKD61 | SKH51 | SKD61 | SKD61 |
| Head thickness | 4mm(T4) | 4mm(T4) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | 6mm(JIS) / 8mm(JIS) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) | 4mm(T4) |
| Product composition | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve |
| Concentricity between the hole and shaft diameters | ◎0.06 | ◎0.06 | ◎0.01 | ◎0.06 | ◎0.003 / ◎0.005 | ◎0.03 | ◎0.03 | ◎0.06 | ◎0.06 | ◎0.005 / ◎0.01 | ◎0.01 | ◎0.03 | ◎0.06 | ◎0.005 | ◎0.03 | ◎0.06 |
| Shaft diameter tolerance | -0.01/-0.02 | -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | 0/-0.005 | -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.03 | -0.01/-0.02 / -0.01/-0.03 | 0/-0.005 / -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.03 | 0/-0.005 | -0.01/-0.02 | -0.01/-0.02 |
| Inner dia. tolerance | H7 | H7 | +0.01/0 | H7 | +0.005/0 | H7 | H7 | H7 | H7 | +0.005/0 / +0.01/0 | +0.005/0 / +0.01/0 | H7 | H7 | +0.005/0 | H7 | H7 |
| Surface treatment | Nitrided | Nitrided | No | Nitrided | No | Nitrided | Nitrided | Nitrided | Nitrided | No | No | Nitrided | Nitrided | No | Nitrided | Nitrided |
| Boring method | Reaming | Reaming | Wire cutting & polishing | Reaming | Grinding | Reaming | Reaming | Reaming | Reaming | Grinding | - | Reaming | Reaming | Grinding | Reaming | Reaming |
| Tapered or not | No | No | No | No | Yes | No | No | No | No | No | Yes | No | No | Yes | No | No |
| Center pin tip shape | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No |
| P (Tip diameter)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 8 | - | - |
Loading...
Related Categories to Ejector Sleeves
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?