Wire crimping and Soldering. Which one is better?

Wire crimping” has pros in that it is easy to install, the electricity can flow smoothly, and it can be used with various equipments. But the cons are that it costs money due to the tools used in the process. On the other hand, “Soldering” uses Flux to make electrical contact, which is cheaper than wire crimping. But the wire and contact point have less flexibility. If you use soldering in equipment that causes vibration, there is a risk of broken wires.

How many Wires can crimp together?

It is not recommended for pair multiple wires in one crimp terminal when wire crimping. Because crimp terminals are designed to work with a specific size of wire, when multiple wires are combined in one crimp, the holding force is reduced, resulting in heat at the terminal.

Should you twist the wire before crimping?

If stranded wire is used in wire crimping, The twisted method of copper wire before wire crimping will increase the surface density. The chance that a wire terminal will be loose or fall out after crimping is going to be reduced. and the risk of an electrical accident is also decreased.

Can you use plier for wire crimping?

It is not recommended to use pliers to crimp the wire except “Wire Crimper”. because there is a chance that the wire terminal will be loose or damaged, which is called “Bad Contact”. And when the equipment is running, the heat at the terminal is going to increase more than usual because electricity cannot flow smoothly. It will cause the ark to and melted wires. Therefore, should study how to use the crimping pliers properly to prevent the danger that may occur.

(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.

MiSUMi

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Quote/ Order

แจ้งวันหยุดทำการในเดือน กรกฎาคมและสิงหาคม 2567 | Notice holiday in July and August 2024 > คลิก

How can we improve?

* This form is only for feedback/comment on our website and service Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Your feedback is essential for our continuous improvement

Thank you for your cooperation.

Your feedback is essential for our continuous improvement.

DAIDO SOLDERLESS TERMINAL Crimp Terminals（Conforming wire size：22-16）

DAIDO SOLDERLESS TERMINAL offers products Crimp Terminals specified by Conforming wire size 22-16 from Wiring Components product category. There are a total of 11 items. Equipment and parts for electrical systems, cables and electrical connections. DAIDO SOLDERLESS TERMINAL products are available to order through MISUMI online 24 hours a day. Free shipping, no minimum order.

Configure

Specification/Dimensions

Shape
- Round
- Y Type
- Sleeve ring type
- Bar mold
- Blade type
- Flag Type
- Enclosed type
- Other
Clear

Conforming wire size(AWG)
1/0

#1/0

2

#2

2/0

#2/0

2×14

2ｘ14

2×16

2 × 18

2×18

2x20

2×20

2×22

3/0

#3/0

4

#4

4/0

#4/0

6

#6

7

8

#8

10

10-8

12

#12

12-10

12-10$18-16

12 to 10

#12 to 10

13-10

14

#14

16

16-20

16-14

16 x 2

16 to 14

16～14

#16 to 14

17

17-13

18

18-16

18 to 14

18 to 16

#18 to 16

20

20-18

20-16

20-14

20-10

20 to 14

20 to 16

20 to 18

20, 18

#20 to 18

22

22-20

22-18

22-16

#22-16

22-14

22-12

22 to 16

22～16

#22 to 16

22 to 18

22 to 20

24

24-20

24 to 20

24 to 22

26

26-24

26-22

26-18

26 to 18

26 to 22

#26 to 22

28

250-300 MCM

250 to 300MCM

#250/300MCM

300-350 MCM

#350MCM

400 MCM

400MCM

#400MCM

500-600 MCM

500 to 600MCM

#600/650MCM

42714
Clear

Internal Diameter(φ)
0.6

0.8

1

1.1000000000000001

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.8$3.5$5.2

2

2.2

2.3

2.4

2.5

2.7

2.8

2.9

3

3.1

3.2

3.3

3.4

3.5

3.7

3.8

3.9

3.95

4

4.16

4.3

4.4

4.5

4.7

4.8

5

5.2

5.3

5.4

5.5

5.8

6.1

6.3

6.35

6.4

6.5

6.6

6.73

7.5

7.7

8.2

8.3

8.4

9.4

10

10.3

10.4

10.5

11

11.4

12.7

13

13.3

14

14.5

15

16

16.4

17

19

19.5

21

23

24

25

28
Drawing

Clear

Type
- Bare Crimp Terminal
- Crimp Terminal With Insulation
- Insertion Type Connector
Clear

Outer Diameter(mm)
1

1.1

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.05

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.9

3

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

3.95

3.96

4

4.1

4.2

4.3

4.5

4.6

4.7

4.8

4.9

5

5 x 3

5 × 3

5.1

5.2

5.4

5.5

5.5 x 3

5.5 × 3

5.6

5.7

5.8

5.9

6

6.2

6.3

6.35

6.4

6.5

6.5 x 3.6

6.5 × 3.6

6.6

6.7

6.8

6.9

7

7.1

7.2

7.3

7.4

7.5

7.6

7.7

7.8

7.9

8

8.1

8.3

8.4

8.5

8.7

8.9

9

9.4

9.5

9.6

9.7

10

10.5

11

11.3

11.5

11.6

11.8

12

12.3

12.4

12.5

12.6

13.2

13.3

13.4

13.49

13.5

13.6

14

14.5

15

15.3

15.5

16

16.5

17

17.5

18

18.5

19

19.2

19.5

20

21.5

22

22.1

22.3

24

25

26.4

26.5

27

27.5

28

28.5

30

31

32

32.4

32.7

36

37

37.6

38

38.5

42

44

45.5

49

50.5

53
Drawing

Clear

Series
- 110
- 187
- 250
- Pin Terminal
- Other
Clear

Insulation coating (color)
- Red
- Blue
- Green
- Yellow
- Transparent Yellow
- Transparent Red
- Transparent Blue
- Transparency
- White
- Other
- Orange
- Transparent Green
Clear

Insulation material
- Nylon
- Vinyl
- Other
- Polycarbonate
Clear

Overall Length(mm)
6

6mm

6.7

7.5

8

8.5

9.4

9.5

10

10mm

10.5

11

11.3

11.4

11.4mm

11.43mm

11.5

11.7

11.9

12

12.2

12.3

12.4

12.45mm

12.5

12.7

12.8

13

13.2

13.25

13.3

13.3mm

13.5

13.6

13.7

13.8

13.9

14

14mm

14.1

14.2

14.3

14.4

14.5

14.7

14.8

14.9

15

15.1

15.2

15.2mm

15.3

15.4

15.5

15.6

15.7

15.77mm

15.8

15.9

16

16.14mm

16.2

16.3

16.4

16.5

16.6

16.7

16.8

16.9

16.95

17

17mm

17.02mm

17.1

17.2

17.25mm

17.3

17.4

17.5

17.7

17.8

18

18.1

18.2

18.25

18.3

18.4

18.5

18.6

18.7

18.77mm

18.8

18.9

19

19mm

19.1

19.2

19.3

19.3mm

19.4

19.43mm

19.5

19.56mm

19.6

19.61mm

19.7

19.8

19.8mm

19.9

20

20mm

20.1

20.14

20.2

20.24mm

20.29mm

20.3

20.4

20.4mm

20.5

20.6

20.7

20.8

20.8mm

20.9

21

21mm

21.1

21.2

21.25

21.3

21.4

21.5

21.5mm

21.6

21.6mm

21.7

21.8

21.8mm

21.87mm

21.9

21.97mm

22

22mm

22.12mm

22.2

22.3

22.3mm

22.4

22.5

22.55

22.6

22.7

22.8

22.9

23

23mm

23.06mm

23.1mm

23.3

23.41mm

23.5

23.7mm

23.8

24

24mm

24.1

24.2

24.2mm

24.4

24.45

24.5

24.7

24.8

25

25.2

25.3

25.4

25.5

25.5mm

25.7

25.8

26

26mm

26.1

26.1mm

26.2

26.3

26.4

26.5

26.6

26.7

26.7mm

26.8

26.9

27

27mm

27.05mm

27.2

27.3

27.5

27.5mm

27.5$21.9$34

27.7

27.8

27.81mm

27.9

27.9mm

28

28mm

28.2

28.3

28.4

28.5

28.5mm

28.6

28.7

28.8

29

29.1

29.4

29.46mm

29.5

29.6

29.67mm

29.7

29.8

30

30.1

30.1mm

30.2

30.3

30.5

30.7

30.7mm

30.8

30.9

31

31mm

31.2

31.4

31.45mm

31.5

31.7

31.8

31.9

32

32.2

32.3

32.3mm

32.4

32.5

32.8

33

33.15

33.2

33.3

33.4

33.5

33.5mm

33.7

33.71

33.71mm

34

34.2

34.2mm

34.5

34.7

34.8

35

35.5

35.95

36

36.3

36.7

36.75

36.8

36.9

37

37mm

37.5

37.6

38

39

39mm

39.2

39.3

39.5

39.7

40

40mm

40.5

40.6

41

41mm

41.5

42

42.3

42.5

42.7

43

43mm

44

45

46.5

46.7

47

47.5

48

48.1

48.5

49

49.5

49.7

50

50.4mm

51

51.3

51.5

52

52.3

52.5

53

53.5

54

54.2

54.7

55

55.2

55.5

55.6

55.7

57

57.3

57.5

59

60

60.3

60.5

61.3

61.8

62.5

63

65

66

67

67.3

68

69

71

72

73.2

73.3

75

77

77.3

78

79

80

81

82

83.3

84

85

85.3

85.5

86

87

88

88.5

89

91

91.5

92

93

95

96

97

98

99

105

106

108

111

113

117

124

130

143

145
Drawing

Clear

Features
- Heat Resistant
- Waterproof
- Gold Plated
Clear

Representative Standard
- UL
- JIS
- CSA
Clear

Brand	(9) (0) AMERICAN DENKI (0) DAIDO SOLDERLESS TERMINAL (11) ESCO (0) FUJI TERMINAL INDUSTRY (0) HIROSUGI-KEIKI (0) JST(JSTMFG) (0) KST (0) MIRAI INDUSTRY (0) NICHIFU TERMINAL INDUSTRIES (22) PANASONIC (0) PANDUIT (0) PHOENIX CONTACT (0) RS Pro (0) SUNHAYATO CORP (0) TE Connectivity (0) TRUSCO (0) WAGO (0) WEIDMULLER (0)
Filter By	All Sale Items
CAD	2D 3D

11 items

Sort By

: 30; 60; 90

Compare

Until 31/03/2025

Round Terminal (R Type)【1-1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

For copper wire, bare crimp terminal/round (R type)
[Features]
· Excellent repertoire of each part size and compatible with many terminal blocks.
[Application]
· General round crimp terminal.
· Cross-sectional area according to the electric wire and screw hole diameter according to the terminal block screw can be selected from many variations.

From: ฿ 148.68
Special Price
Days to Ship: Same day

Same day

Compare

Until 31/03/2025

Plate Shaped Terminal (AP Type)【1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

Crimping terminal used to connect the electric wire to the terminal block. Supports cases where the terminal insertion port of the terminal block is narrow.
[Features]
· Compared to other companies, it excels in the repertoire of each part size and is compatible with many terminal blocks.
[Application]
· A crimp terminal with a plate-shaped tip that can be connected to a terminal block with a thin insertion port.
· A large number of variations can be selected for the shape and dimensions according to the insertion port and the sq according to the wire.

From: ฿ 1,727.23
Special Price
Days to Ship: Same day

Same day

Compare

Bare Crimp Terminal for Copper Wires, Square Spade Terminal (F Type)

Until 31/03/2025

Bare Crimp Terminal for Copper Wires, Square Spade Terminal (F Type)【100-1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

General terminal used to connect an electric wire to a terminal block. Shaped with ease of attachment to / detachment from a terminal block in consideration.
[Features]
· Features a large number of variations in dimensions compatible with many types of terminal blocks.
· Bare crimp terminal for copper wires / square spade (F type).
[Applications]
· Crimp terminal with an open tip that can be attached to and detached from a terminal block without removing the screw.
· Size (sq) matching cable and screw hole size matching terminal block screw can be chosen from many variations.

From: ฿ 156.00
Special Price
Days to Ship: Same day

Same day

Compare

Rod-Shaped Terminal (A Type)【100-1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

Insulated solderless, rod-shaped, and vinyl/tube (BVA type) terminals for copper wire. *Twisted wires combined into a single-track line for easy insertion and removal.
[Features]
· Crimping terminal compatible with cases where the terminal insertion port of the terminal block is narrow.
· Compared to other companies, it excels in the repertoire of each part size and is compatible with many terminal blocks.
[Application]
· A crimp terminal with a rod-shaped tip that can be connected to a terminal block with a thin insertion port.
· A variety of shapes and sizes suitable for the insertion port and sq suitable for the wire can be selected.

From: ฿ 224.13
Days to Ship: 3 Day(s)

3 Day(s)

Compare

Interlocking Terminal (YT Type)【500-1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

A bare crimp terminal that combines the advantages of round terminals and open-ended terminals.
[Features]
· Naked crimp terminal/interlocking type (YT type) for copper wires.
· Can be disconnected without fully removing the screws.The terminal workability is similar to that of a fork terminal. This terminal also offers a tensile strength similar to that of the R type.
· Easy to install terminals on the terminal block without removing screws.
· Because the tongue tip closes as the screw is tightened, there is a certain amount of tensile strength after screwing.
· Tin-plated for rust prevention.
[Application]
· When placing importance on workability (working time) for installing terminals on the terminal block.
· When importance is attached to tensile strength.

From: ฿ 1,095.01
Days to Ship: 9 Day(s)

9 Day(s)

Compare

Bare Crimp Sleeve for Copper Wires, Sleeve for Linear Superposition (P Type)【100 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

Crimp terminal for connection between electric cables.
[Features]
· Overlaps cables in the sleeve to crimp at a site.
[Applications]
· General overlapping sleeve. Size (sq) matching cables can be chosen from variations.

From: ฿ 326.28
Days to Ship: Same day

Same day

Compare

Hook Terminal (H Type)【1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

A bare crimp terminal that combines the advantages of round terminals and open-ended terminals.
[Features]
· Naked crimp terminal/hook-type (H type) for copper wires.
· Terminals detachable without removing all of the screws.
· It has the convenience of being able to attach and detach the terminal block and terminals without removing the screws.
· Because there is a gap in the diagonally rearward direction for the screw to pass through the hollowed hole, there is a certain amount of tensile strength after fixing the screw.
· Tin-plated for rust prevention.
[Application]
· For when the workability (working time) of attaching and detaching the terminal block and the terminal is important.
· For equipment and worksites that may be detached from the terminal block.

From: ฿ 1,085.93
Days to Ship: 9 Day(s)

9 Day(s)

Compare

Lateral Opening Terminal (HY Type)【1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

A bare crimp terminal that combines the advantages of round terminals and open-ended terminals.
[Features]
· Bare crimp terminal for copper wire and lateral open shape (HY type) *Terminals are can be detached without removing all of the screws.
· It has the convenience of being able to attach and detach the terminal block and terminals without removing the screws.
· Because there is a gap in the horizontal direction for the screw to pass through the hollowed hole, there is a certain tensile strength after the screw is fixed.
· Tin-plated for rust prevention.
[Application]
· For when the workability (working time) of attaching and detaching the terminal block and the terminal is important.
· For equipment and worksites that may be detached from the terminal block.

From: ฿ 1,055.39
Days to Ship: 9 Day(s)

9 Day(s)

Compare

Round, Front-Open Terminals (RF)【1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

Bare, solderless, and round, front-open terminals (RF type) for copper wire *Can be attached and removed without fully removing screw.
[Features]
· Easy to attach and detach the terminal from the terminal block without removing the screw.
· The contact area with the terminal block is larger than that of the open-ended type terminals, which further reduces the possibility of heat generation.
· The tongue has a higher strength than the open-ended type terminal, and it is effective against bending and damage of the terminal.
· Tin-plated for rust prevention.
[Application]
· When placing importance on workability (working time) for terminal block installation.
· Devices and work spaces that may be detached from the terminal block.
· If you are more concerned about the temperature and strength of the terminals.

From: ฿ 1,046.26
Days to Ship: 3 Day(s)

3 Day(s)

Compare

Straight Butt Weld Sleeve (B Type)【100 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

For copper wire. Bare crimp sleeve/straight butt weld (B) types
[Features]
· Crimped in two places with electric wires facing the stopper.
[Application]
· A general butt sleeve that allows you to select from a variety of sqs that match the electric wire.

From: ฿ 374.66
Days to Ship: Same day

Same day

Compare

Bare Crimp Terminal for Copper Wire, Flag Terminal【1,000 Pieces Per Package】

DAIDO SOLDERLESS TERMINAL

The barrel to be crimped is perpendicular to the tongue part, making it suitable for connecting work in narrow spaces.

From: ฿ 1,167.03
Days to Ship: 11 Day(s)

11 Day(s)


Brand
Product Series
CAD
From
Days to Ship
Shape
Conforming wire size(AWG)
Internal Diameter(φ)
Type
Outer Diameter(mm)
Series
Insulation coating (color)
Insulation material
Overall Length(mm)
Features
Representative Standard

	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare Until 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL	DAIDO SOLDERLESS TERMINAL
Product Series	Round Terminal (R Type)【1-1,000 Pieces Per Package】	Plate Shaped Terminal (AP Type)【1,000 Pieces Per Package】	Bare Crimp Terminal for Copper Wires, Square Spade Terminal (F Type)【100-1,000 Pieces Per Package】	Rod-Shaped Terminal (A Type)【100-1,000 Pieces Per Package】	Interlocking Terminal (YT Type)【500-1,000 Pieces Per Package】	Bare Crimp Sleeve for Copper Wires, Sleeve for Linear Superposition (P Type)【100 Pieces Per Package】	Hook Terminal (H Type)【1,000 Pieces Per Package】	Lateral Opening Terminal (HY Type)【1,000 Pieces Per Package】	Round, Front-Open Terminals (RF)【1,000 Pieces Per Package】	Straight Butt Weld Sleeve (B Type)【100 Pieces Per Package】	Bare Crimp Terminal for Copper Wire, Flag Terminal【1,000 Pieces Per Package】
CAD	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D
From	฿ 148.68 Special Price On Sale Until 31/03/2025	฿ 1,727.23 Special Price On Sale Until 31/03/2025	฿ 156.00 Special Price On Sale Until 31/03/2025	฿ 224.13	฿ 1,095.01	฿ 326.28	฿ 1,085.93	฿ 1,055.39	฿ 1,046.26	฿ 374.66	฿ 1,167.03
Days to Ship	Same day	Same day	Same day	3 Day(s)	9 Day(s)	Same day	9 Day(s)	9 Day(s)	3 Day(s)	Same day	11 Day(s)
Shape	Round	Blade type	Y Type	Bar mold	Y Type	Sleeve ring type	Y Type	Y Type	Y Type	Sleeve ring type	Flag Type
Conforming wire size(AWG)	22-16	22-16	22-16	22-16	22-16	22-16	22-16	22-16	22-16	22-16	22-16
Internal Diameter(φ)	2.5 ～ 13	-	3.2 ～ 6.4	-	3.2 ～ 6.4	-	3.2 ～ 6.4	3.2 ～ 5.3	3.2 ～ 5.3	-	-
Type	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal	Bare Crimp Terminal
Outer Diameter(mm)	5.5 ～ 22	1 ～ 3.1	5.6 ～ 9.7	1.3 ～ 1.7	5.8 ～ 11.5	-	5.5 ～ 11.5	5 ～ 7.2	5.5 ～ 8	-	6
Series	-	-	-	-	-	-	-	-	-	-	-
Insulation coating (color)	-	-	-	-	-	-	-	-	-	-	-
Insulation material	-	-	-	-	-	-	-	-	-	-	-
Overall Length(mm)	12 ～ 29.5	13.3 ～ 21.5	12.8 ～ 17	17 ～ 21.3	14.1 ～ 20.2	8	13.8 ～ 20.2	12.2 ～ 15.8	11.4 ～ 15.3	15	-
Features	-	-	-	-	-	-	-	-	-	-	-
Representative Standard	UL / JIS / CSA	UL / CSA	UL / CSA	UL / CSA	CSA	CSA	UL / CSA	UL / CSA	UL / CSA	UL / JIS / CSA	-

Related Categories to Crimp Terminals

- Crimp Terminals

FAQ Crimp Terminals

Question: Wire crimping and Soldering. Which one is better?: Answer: Wire crimping” has pros in that it is easy to install, the electricity can flow smoothly, and it can be used with various equipments. But the cons are that it costs money due to the tools used in the process. On the other hand, “Soldering” uses Flux to make electrical contact, which is cheaper than wire crimping. But the wire and contact point have less flexibility. If you use soldering in equipment that causes vibration, there is a risk of broken wires.
Question: How many Wires can crimp together?: Answer: It is not recommended for pair multiple wires in one crimp terminal when wire crimping. Because crimp terminals are designed to work with a specific size of wire, when multiple wires are combined in one crimp, the holding force is reduced, resulting in heat at the terminal.
Question: Should you twist the wire before crimping?: Answer: If stranded wire is used in wire crimping, The twisted method of copper wire before wire crimping will increase the surface density. The chance that a wire terminal will be loose or fall out after crimping is going to be reduced. and the risk of an electrical accident is also decreased.
Question: Can you use plier for wire crimping?: Answer: It is not recommended to use pliers to crimp the wire except “Wire Crimper”. because there is a chance that the wire terminal will be loose or damaged, which is called “Bad Contact”. And when the equipment is running, the heat at the terminal is going to increase more than usual because electricity cannot flow smoothly. It will cause the ark to and melted wires. Therefore, should study how to use the crimping pliers properly to prevent the danger that may occur.