COCO SHINON Conductive Rubber, Sponge Related

*CAD data for this series is being revised. Data will be made available as soon as modifications are complete.
[Features]
· PCB rack sheet is a guide developed for printed circuit board storage racks.
· All models are conductive and the surface resistance value is maintained from 10^4 to 10^8 Ω/□.
· Can be mounted as required for the application.
· Three types of guide sheets are available. L type: Conductive PS, PP type: Conductive PP, MG type: Conductive heat-resistant resin.

*CAD data for this series is being revised. Data will be made available as soon as modifications are complete.

[Features]
· Sinonstat is a semi-hard mat made from a special mix of conductive materials. It consists of 2 layers: an antistatic color layer and a black conductive layer.
· Highly heat-resistant. Melted solder will not eat through it, ensuring security during soldering work.
· Sinonstat mats will not flake off powder or peel off, so you can use them with confidence in cleanrooms.
· "Product Warning" The product features hard surfaces and easily coils on all 4 sides. When using, lay it out for at least 24 hours, then fix in place with double-sided tape.
· Performance of Sinonstat

Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

[Features]
· The SGL rack is a basic L-shaped circuit board holder.
· The grooves are relatively deep at 5 mm, keeping boards safely in place for storage.
· The heat-resistant type uses carbon fiber, which provides durability and eliminates powder dropping, so you can use it with confidence in clean rooms.
· Surface resistance maintained at 104 to 108 Ω/

*CAD data for this series is being revised. Data will be made available as soon as modifications are complete.

[Features]
· A standard magazine rack for insertion machines.
· Supports surface chip mounts (chip mounter).
· Used in a wide variety of areas, from automatic insertion to circuit board storage and transport.
· The ED-2504M7 is a new kind of magazine rack with an adjustable width that can be adjusted with a single action.
· The standard product is heat resistant (supports circuit board temperatures of 130°C).
· The ED-9500NH is a large magazine with sufficient heat resistance (supports circuit board temperatures up to 140°C) to be used for surface mounting (chip mounter).
· The width adjuster lets you loosen 2 screws on the top to freely and easily change widths.
· Surface resistance is semi-permanently maintained at 104 to 108 Ω/□ for all types of models.

Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

[Features]
· The drawing case was developed to create an environment that doesn't cause static electricity interference in clean rooms and work areas, keeping electronic parts safe if they make contact with it.
· The card-case type is sealed on three surfaces for hard durability.
· The clear-file type is sealed on two surfaces

Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

[Features]
· The EL rack is a basic L-type circuit board holder suited for relatively large boards.
· Shallow (3 mm) grooves ensure board components won't butt against the rack, even if there is little empty space on the edges.
· Sturdy construction supports loads up to 30 kg.
· Uses conductive PP materials for superior chemical resistance.
· Surface resistance maintained at 104 to 108Ω/□.