(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Dial Gauges（Waterproof Function：NA）
Configure
Specification/Dimensions
-
Application
-
Scale interval minimal display(mm)
-
Display Method
- Dial
- Digital
-
Maximum Measurement Length (Range Selection)(mm)
-
Waterproof Function
- Available
- NA
- Drip-Proof
-
Output terminal for measuring data: with or without
- Available
- NA
-
Scale type
- Continuous Scale
- Balance Scale
- Reverse Scale
-
Calibration Certificate
- No
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 43 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation
MITUTOYO
• Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.
All types come with limit markers and a bezel clamp as standard.
• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.
These parts can be easily installed and removed without tools.
• Secure adhesion between the bezel and crystal as well as the use of an O-ring
prevents water or oil penetration.
• The spindle is made of high-strength quench hardened stainless steel suitable for
heavy duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of a hard coating on the surface of the crystal makes
the gauge highly scratch and chemical-resistant.From: ฿ 1,368.34 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge 543 Series, ABS Digimatic Indicator ID-CX
MITUTOYO
With the ABS (absolute) system, which has an absolute origin on the scale, the set origin is retained as a measurement reference point, even after the power is turned off. This makes troublesome home matching unnecessary when the power is turned on again, and measurements can be started as soon as the power is supplied. Adopts ABS method to eliminate over speed errors.From: ฿ 14,705.15 Special Price Days to Ship:
46 Day(s)
46 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge 543 Series, ABS Digimatic Indicator ID-F
MITUTOYO
Equipped with a wide range of measurement functions. Equipped with tolerance judgment function in which the backlight lights up in red when deviating from the allowable value. The minimum display amount can be switched between 0.01 mm and 0.001 mm.From: ฿ 22,556.55 Special Price Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Regular Dial Gauge 2 Series, Long Stroke Type
MITUTOYO
2 Series Regular Dial Gauge, Long Stroke TypeFrom: ฿ 2,400.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type
MITUTOYO
Dial gauge with a compact design. Does not take up space when attached to jigs.From: ฿ 2,116.66 Special Price Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Regular Dial Gauge 2 Series, Under 1 Turn Type
MITUTOYO
It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.From: ฿ 2,766.67 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]From: ฿ 1,722.58 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type
MITUTOYO
• The ABS (absolute) sensor restores the last origin position automatically
when the indicator is turned on.
• Thanks to Mitutoyo's ABSOLUTE Linear Encoder, reliability has been increased
due to elimination of over-speed errors.• Tolerance-judging measurement is available by setting upper and lower limit values.
• Battery life of approx. 7,000 hours in continuous use has been achieved with onlyone battery.
• Equipped with a data output port that enables incorporation into measurement networking
and statistical process control systems.From: ฿ 14,705.15 Special Price Days to Ship:
22 Day(s)
22 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
Dial gauge that is ideal for displacement measurements such as plane contour, workpiece mounting quality evaluation, shaft runout and perpendicularity, etc.
[Features]
· It is a high cost performance model with an easy-to-see digital display.
· With hold function.
· With auto off function. (Approximately 5 minutes)
· Scale interval 0.01 mm, measurement range 12.7 mm.
· Comes with two back covers, a flat type and a type with lug.
[Applications]
· Can be used for displacement measurements such as plane contour, workpiece mounting quality evaluation, perpendicularity, etc.From: ฿ 4,440.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Large Dial Gauge, 3/4 Series Long Stroke
MITUTOYO
The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.From: ฿ 3,550.00 Special Price Days to Ship:
2 Day(s)
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge 543 Series, Digimatic Indicator ID-H
MITUTOYO
World top level digital indicator that supports high accuracy and multi-functional measurement. Equipped with a wide range of functions that support diversified measurement requirements.From: ฿ 27,820.55 Special Price Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, ABSOLUTE Digimatic Indicator ID-F SERIES 543
MITUTOYO
• GO/±NG judgment function: If a judgment result shows an out of tolerance condition, the display backlighting changes from green to red.
• An analog bar indicator has been integrated to make upper/lower limit and turnover point
reading more comfortable.
• With Mitutoyo's ABSOLUTE Linear Encoder technology, once the measurement reference point
has been set it will not be lost when the power is turned off. Also, reliability has been
increased due to the elimination of over-speed errors.
• Easy-to-read large LCD readout with the character height of 8.5mm.
• External power supply type: battery change is not necessary. Power can also be supplied via
the AC adapter supplied as a standard accessory.
• The resolution can be switched between 0.001mm /0.01mm (or .001” /.0005”/.0001” /.00005”).
• Equipped with a data output port that enables incorporation into measurement networking
and statistical process control systems.From: ฿ 22,556.55 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge (Inner)
NIIGATA SEIKI (SK)
Dial gauge for inner diameter measurement with a wide application range, including hole diameter measurement, special shape inner diameter measurement (groove), etc.
[Features]
· Useful for measuring hole diameters and special shape inner diameters.
[Applications]
· Inner diameter measuring instrument with a wide application range, including high-precision inner diameter measurement, special shape inner diameter measurement (groove), etc.From: ฿ 5,036.03 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Improved abrasion resistance with a probe with a ruby ball.From: ฿ 4,412.47 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Small Dial Gauge 1 Series, Outer Frame Diameter φ40 mm Under 1 Turn Type
MITUTOYO
Dial gauge with a compact design. Does not take up space when attached to jigs. Dial gauge developed to prevent reading errors during multiple rotations.From: ฿ 3,184.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)
MITUTOYO
[Features]
· Uses Mitutoyo's original shockproof mechanism with a buffering mechanism, making it excellent in durability and impact resistance.From: ฿ 2,462.25 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, 7 / 547 Series Thickness Gauge, Digital Type
MITUTOYO
The thickness of small item parts, paper, felt, and so on can be measured quickly with one touch. Ceramic is used for the gauge heads and anvil, so there are no concerns about rusting.From: ฿ 13,471.82 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge (Outer)
NIIGATA SEIKI (SK)
Dial gauge optimum for high-precision outer diameter measurement.
[Features]
· Measuring instrument for outer diameters.
[Applications]
· Convenient for shaft outer diameter measurement.From: ฿ 8,109.15 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Regular Dial Gauge (Back Plunger Type)
MITUTOYO
[Features]
· The back plunger type dial gauge is suitable for leveling tables used for machine tools or the like, and for installation on inspection machine jigs and in narrow areas. The standard dial gauge is suitable for places where it is hard to see the scale plate.
· Uses Mitutoyo's original shockproof mechanism with a buffering structure, making it excellent in durability and impact resistance.From: ฿ 5,307.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.2 mm)
NIIGATA SEIKI (SK)
Replacement probe for dial indicators.
[Features]
· The threaded part is M1.6 × P0.35 mm.
· Round steel measuring probe.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 529.37 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Standard Dial Gauge (Guide Adjustment Type)
MITUTOYO
Rotate the head knob to adjust the pointer position independent of the vertical movement of the spindle.From: ฿ 3,617.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MITUTOYO
[Features]
· Can be used for dial gauges of small and standard types with measurement range of 10 mm or less.From: ฿ 48.33 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
A dial test indicator for measuring flatness, parallelism and eccentricity.
[Features]
· Includes two convenient stem types.
· The stem attached to the dovetail groove can be used to retain magnetic stands.From: ฿ 3,460.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, 7 / 547 Series Thickness Gauge, Dial Type
MITUTOYO
The thickness of small item parts, paper, felt, and so on can be measured quickly with one touch with this dial thickness gauge. Ceramic is used for the gauge heads and anvil, so there are no concerns about rusting.From: ฿ 3,700.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
[Features]
· The digital display is easy to see.
· With hold function.
· Equipped with auto off function (after about 5 minutes).
· Digital indicator with scale intervals of 0.01 mm and measurement range of 12.7 mm.
· Comes with two back covers, a flat type and a type with lug.From: ฿ 5,000.45 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe
NIIGATA SEIKI (SK)
A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· A ruby is embedded in the measurement probe.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 4,271.97 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.2 mm), Carbide Measurement Probe
NIIGATA SEIKI (SK)
An abrasion-resistant replacement measurement probe with a low thermal expansion coefficient for use with dial indicators.
[Features]
· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.
· Round carbide probe.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 780.23 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.8 mm), Carbide Measurement Probe
NIIGATA SEIKI (SK)
An abrasion-resistant replacement measurement probe with a low thermal expansion coefficient for use with dial indicators.
[Features]
· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.
· Round carbide probe.
· Uses a green scale plate for improved visibility.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 780.23 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
A measuring device which can measure the thickness of small parts, paper, and so on quickly with one touch.
[Features]
· Measurements can be taken in a short time thanks to the easily-visible digital display and its exceptional operability.
· With Auto Power Off functionality. (Approximately 5 minutes)
· With hold function.
· Gauge head is ceramic, preventing any rusting issues.
[Applications]
· The thickness of small parts, paper, and so on can be measured quickly with one touch.From: ฿ 9,440.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type Dial Gauge 73750
SHINWASOKUTEI
A dial gauge for measuring flatness, parallelism and eccentricity.
[Features]
· Comes with a lug for convenient attachment to the magnet stand.
[Applications]
· Used for measurement of flatness, parallelism, and eccentricity, and for comparative measurement.From: ฿ 1,109.02 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
[Features]
· Digital type that can be read quickly.
· 12 mm letter height is easily visible at a glance.
· Performs comparative measurement with one switch.
· The ZERO setting switch can be used to measure the difference from a reference point.
· The comfortably thick handle is the perfect size for large-handed users.
· With a special protective case.
· A cushion is provided to alleviate shockFrom: ฿ 4,710.97 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Standard Dial Gauge 2 Series (Registering Pointer Type)
MITUTOYO
A mechanism holds the pointer and the spindle where the spindle is pushed, and the pointer displays the maximum value and stops.From: ฿ 3,584.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
Dial gauge that measures the hardness of rubber and plastics, conforming to JIS and ISO standards.
[Features]
· Conforms to the following standards regarding the shape of the pushing needle, dimensions of the pressing surface, and spring force.
· JIS K 6253 (hardness test method for vulcanized rubber).
· ISO 7619 (E).
[Applications]
· It is used as a hardness meter to measure the hardness of rubber/plastic.From: ฿ 6,981.28 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
NOGA JAPAN
[Features]
· 0.002 mm Scale, Measurement Range: 0.28 mm
· No Clutch Type
· With Dovetail Grooves x 3From: ฿ 5,362.46 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe
NIIGATA SEIKI (SK)
An abrasion-resistant type dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· Features carbide measurement probes.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 4,271.97 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)
NIIGATA SEIKI (SK)
A handy dial gauge for measuring unevenness and straightness, etc., in tight spaces where use of typical dial gauges is not possible.
[Features]
· Includes inspection report.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings.
· Uses a green scale plate for improved visibility.
· Lever-type dial gauge.
· The main body is made of steel.
[Applications]
· Used for inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 3,013.31 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe
NIIGATA SEIKI (SK)
A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· A ruby is embedded in the measurement probe.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 3,046.48 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe
NIIGATA SEIKI (SK)
An abrasion-resistant type dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· Features carbide measurement probes.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round carbide probe boasts high abrasion-resistance and high levels of hardness and so will not scratch easily. It also has a low thermal expansion coefficient.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 3,046.48 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.2 mm), Ruby Measurement Probe
NIIGATA SEIKI (SK)
Non-conductive, highly abrasion-resistant replacement measurement probe for use with dial indicators.
[Features]
· The round ruby measurement probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Round ruby measurement probe.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 668.11 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.8 mm)
NIIGATA SEIKI (SK)
Replacement probe for dial indicators.
[Features]
· The threaded part is M1.6 × P0.35 mm.
· Round steel measuring probe.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 529.37 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Probe For Dial Indicator (For 0 To 0.8 mm), Ruby Measurement Probe
NIIGATA SEIKI (SK)
Non-conductive, highly abrasion-resistant replacement measurement probe for use with dial indicators.
[Features]
· The round ruby measurement probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Round ruby measurement probe.
[Applications]
As a replacement probe for use with a dial indicatorsFrom: ฿ 780.23 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Dial Gauge (Graduations: 0.001 mm)
NIIGATA SEIKI (SK)
Standard model dial gauge with 0.001‑mm graduations and excellent abrasion resistance.
[Features]
· The most common type of dial gauge with 0.001‑mm graduations. Built-in limit indicator.
· Features an O-ring sealed between the inner and outer lid to prevent water and oil entering.
· Uses jewel bearings.
· Uses a green scale plate for improved visibility.
· Flat-type back and center-lug back lid included.
· Carbide probe.
[Applications]
· Measuring surface flatness and checking tool set ups.
· Used for measuring axial runout, checking squareness, etc.From: ฿ 3,761.10 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Dial Gauge (Graduations: 0.01 mm)
NIIGATA SEIKI (SK)
Standard model dial gauge with 0.01‑mm graduations and excellent abrasion resistance.
[Features]
· The most common type of dial gauge with 0.01‑mm graduations. Built-in limit indicator.
· Features an O-ring sealed between the inner and outer lid to prevent water and oil entering.
· Uses jewel bearings.
· Uses a green scale plate for improved visibility.
· Flat-type back and center-lug back lid included.
· Carbide probe.
[Applications]
· Measuring surface flatness and checking tool set ups.
· Used for measuring axial runout, checking squareness, etc.From: ฿ 1,771.75 Days to Ship:
45 Day(s)
45 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Application |
| Scale interval minimal display(mm) |
| Display Method |
| Maximum Measurement Length (Range Selection)(mm) |
| Waterproof Function |
| Output terminal for measuring data: with or without |
| Scale type |
| Calibration Certificate |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.              | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025       | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025       | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | |
| Brand | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MISUMI | MITUTOYO | NIIGATA SEIKI (SK) | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATA SEIKI (SK) | OZAKI MFG (PEACOCK) | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATA SEIKI (SK) | MITUTOYO | NIIGATA SEIKI (SK) | MITUTOYO | MITUTOYO | SHINWASOKUTEI | MITUTOYO | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | SHINWASOKUTEI | SHINWASOKUTEI | MITUTOYO | NIIGATA SEIKI (SK) | NOGA JAPAN | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) |
| Product Series | Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation | Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type | Dial Gauge, ABSOLUTE Digimatic Indicator ID-CX SERIES 543 - Standard Type | Small Dial Gauge 1 Series, Outer Frame Diameter φ40 mm Under 1 Turn Type | 2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type) | Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe | Probe For Dial Indicator (For 0 To 0.2 mm), Carbide Measurement Probe | Probe For Dial Indicator (For 0 To 0.8 mm), Carbide Measurement Probe | Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Carbide Measurement Probe | Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Ruby Measurement Probe | Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations), Carbide Measurement Probe | Probe For Dial Indicator (For 0 To 0.2 mm), Ruby Measurement Probe | Probe For Dial Indicator (For 0 To 0.8 mm), Ruby Measurement Probe | ||||||||||||||||||||||||||||||
| From | ฿ 1,368.34 Special Price On Sale Until 31/03/2025 | ฿ 14,705.15 Special Price On Sale Until 31/03/2025 | ฿ 22,556.55 Special Price On Sale Until 31/03/2025 | ฿ 2,400.00 Special Price On Sale Until 31/03/2025 | ฿ 2,116.66 Special Price On Sale Until 31/03/2025 | ฿ 2,766.67 Special Price On Sale Until 31/03/2025 | ฿ 1,722.58 | ฿ 14,705.15 Special Price On Sale Until 31/03/2025 | ฿ 4,440.00 | ฿ 3,550.00 Special Price On Sale Until 31/03/2025 | ฿ 27,820.55 Special Price On Sale Until 31/03/2025 | ฿ 22,556.55 Special Price On Sale Until 31/03/2025 | ฿ 5,036.03 | ฿ 4,412.47 | ฿ 3,184.00 Special Price On Sale Until 31/03/2025 | ฿ 2,462.25 Special Price On Sale Until 31/03/2025 | ฿ 13,471.82 Special Price On Sale Until 31/03/2025 | ฿ 8,109.15 | ฿ 5,307.00 Special Price On Sale Until 31/03/2025 | ฿ 529.37 | ฿ 3,617.00 Special Price On Sale Until 31/03/2025 | ฿ 48.33 Special Price On Sale Until 31/03/2025 | ฿ 3,460.00 | ฿ 3,700.00 Special Price On Sale Until 31/03/2025 | ฿ 5,000.45 | ฿ 4,271.97 | ฿ 780.23 | ฿ 780.23 | ฿ 9,440.00 | ฿ 1,109.02 | ฿ 4,710.97 | ฿ 3,584.00 Special Price On Sale Until 31/03/2025 | ฿ 6,981.28 | ฿ 5,362.46 | ฿ 4,271.97 | ฿ 3,013.31 | ฿ 3,046.48 | ฿ 3,046.48 | ฿ 668.11 | ฿ 529.37 | ฿ 780.23 | ฿ 3,761.10 | ฿ 1,771.75 |
| Days to Ship | Same day | 46 Day(s) | 3 Day(s) | 5 Day(s) | 4 Day(s) | Same day | Same day | 22 Day(s) | Same day | 2 Day(s) | 3 Day(s) | 45 Day(s) | Same day | 45 Day(s) | Same day | Same day | 5 Day(s) | 45 Day(s) | 45 Day(s) | 15 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 45 Day(s) | 12 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 12 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 15 Day(s) | 31 Day(s) | 45 Day(s) | 15 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 15 Day(s) | 45 Day(s) | 45 Day(s) |
| Application | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type / Lever Type (Indicator) | Standard Type | Standard Type | Standard Type | Standard Type / Lever Type (Indicator) | Caliper Type | Standard Type | Standard Type | Standard Type | Thickness type | Caliper Type | Standard Type | Probe | Standard Type | Parts | Lever Type (Indicator) | Thickness type | Standard Type | Lever Type (Indicator) | Probe | Probe | Thickness type | Standard Type | Thickness type | Standard Type | Standard Type | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Probe | Probe | Probe | Standard Type | Standard Type |
| Scale interval minimal display(mm) | 0.001 ～ 0.01 | 0.01 | 0.01/0.001 switching | 0.01 | 0.001 ～ 0.01 | 0.001 ～ 0.1 | 0.001 | 0.01 | 0.01 | 0.001 ～ 0.01 | 0.0005/0.001 switching | 0.001 | 0.01 ～ 0.025 | 0.01 | 0.001 ～ 0.01 | 0.02 | 0.01 | 0.01 ～ 0.025 | - | - | 0.01 | - | 0.01 | 0.001 ～ 0.01 | 0.01 | 0.002 | - | - | 0.01 | 0.01 | 0.01 | 0.01 | - | 0.002 | 0.002 | 0.01 | 0.01 | 0.01 | - | - | - | 0.001 | 0.01 |
| Display Method | Dial | Digital | Digital | Dial | Dial | Dial | Dial | Digital | Digital | Dial | Digital | Digital | Dial | Dial | Dial | Dial | Digital | Dial | Dial | - | Dial | - | Dial | Dial | Digital | Dial | - | - | Digital | Dial | Digital | Dial | Dial | Dial | Dial | Dial | Dial | Dial | - | - | - | Dial | Dial |
| Maximum Measurement Length (Range Selection)(mm) | 0–1 ～ 6~20 | 21 to 50 | 21 to 50 | 0~20 ～ 21 to 50 | 0–1 ～ 1.1 to 5 | 0~0.8 ～ 1.1 to 5 | 0–1 | - | 6~20 | 0–1 ～ 51 to 100 | 21 to 50 ～ 51 to 100 | - | 6~20 ～ 51 to 100 | 0–1 | 0–1 | 0–1 ～ 1.1 to 5 | 6~20 | 6~20 ～ 21 to 50 | - | - | 6~20 | - | 0–1 | 0–1 ～ 6~20 | 6~20 | 0–1 | - | - | 6~20 | 6~20 | 6~20 | 6~20 | - | - | 0–1 | 0–1 | 0–1 | 0–1 | - | - | - | 0–1 | 1.1 to 5 ～ 6~20 |
| Waterproof Function | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Output terminal for measuring data: with or without | NA | Available | Available | NA | NA | NA | NA | - | NA | NA | Available | - | NA | NA | NA | NA | Available | NA | - | NA | NA | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Scale type | Continuous Scale / Balance Scale / Reverse Scale | - | - | Continuous Scale / Reverse Scale | Continuous Scale / Balance Scale | Balance Scale | Continuous Scale | - | - | Continuous Scale / Balance Scale | - | - | Continuous Scale | Balance Scale | Balance Scale | Balance Scale | - | Continuous Scale | Balance Scale | - | Continuous Scale | - | Balance Scale | Continuous Scale | - | Balance Scale | - | - | - | Continuous Scale | - | Continuous Scale | Continuous Scale | Balance Scale | Balance Scale | Balance Scale | Balance Scale | Balance Scale | - | - | - | Balance Scale | Continuous Scale |
| Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | No | - | - | - | - | - | No | No | No | - | - | - | - | - | - | No | No | No | No | No | No | No | No | No |
Loading...
Related Categories to Dial Gauges
-
- Vernier Calipers
- Micrometers
- Dial Gauges
- Height Gauges
- Depth Gauges
- Inner Diameter Measuring Instruments
- Gauges
- Squares
- Scales
- Tape Measures
- Tape Measures
- Weighing Instruments
- Goniometers
- Optical Devices
- Level Gauges
- Laser Measuring Instruments
- Magnet-Related
- Surface Plates
- Tally Counters
- Gas Measuring Instruments / Detectors
- Scribing Tips
- Stopwatches/Timers
- Tension Gauges
- Pressure Gauges
- Thermometers/Hygrometers
- Environment Measuring Instruments
- Microscopes
- Hardness Meters
- Vibration Meters / Tachometers
- Water Quality / Moisture Measuring Instruments
- Electric Measuring Instruments / Testers
- Viscometers
- Film Thickness Gauges / Detectors
- Flow Meters
- Eccentricity Measuring Instruments
- Surface Roughness Testers
- Sound Detectors
- Data Measurement Equipment
-
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?