(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Dial Gauges（Display Method：Dial）
Configure
Specification/Dimensions
-
Application
-
Scale interval minimal display(mm)
-
Display Method
- Dial
- Digital
-
Maximum Measurement Length (Range Selection)(mm)
-
Waterproof Function
- Available
- NA
- Drip-Proof
-
Output terminal for measuring data: with or without
- Available
- NA
-
Scale type
- Continuous Scale
- Balance Scale
- Reverse Scale
-
Calibration Certificate
- No
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 113 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation
MITUTOYO
• Standard 0.01mm graduation dial gauges having a bezel with an outside diameter of 57 mm.
All types come with limit markers and a bezel clamp as standard.
• The bezel clamp and lifting lever (optional) can be attached to either the right or leftside.
These parts can be easily installed and removed without tools.
• Secure adhesion between the bezel and crystal as well as the use of an O-ring
prevents water or oil penetration.
• The spindle is made of high-strength quench hardened stainless steel suitable for
heavy duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of a hard coating on the surface of the crystal makes
the gauge highly scratch and chemical-resistant.From: ฿ 1,368.34 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Lever type dial gauge test indicator Vertical/Small
MITUTOYO
[Features]
·It is a standard model
· Improved visibility
· Easy to read cover plate
· Prevents dust from entering the interior of the scale plate
· The bezel and cover plate are integrated
· The bezel is prevented from coming off
· Multilayer coating is provided on the cover plate
· Prevents the holding part of the probe from rattling
· Prevents the sensitivity and followability of the probe from deteriorating
· Inspection report included
· Displays the length of the probe on the scale board
· Limit pointer can be mounted
·⌀6 dovetailed stem included as standard
· Complies with the new JIS B7533:2015From: ฿ 4,218.44 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Regular Dial Gauge 2 Series, Long Stroke Type
MITUTOYO
2 Series Regular Dial Gauge, Long Stroke TypeFrom: ฿ 2,400.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type
MITUTOYO
Dial gauge with a compact design. Does not take up space when attached to jigs.From: ฿ 2,116.66 Special Price Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Regular Dial Gauge 2 Series, Under 1 Turn Type
MITUTOYO
It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.From: ฿ 2,766.67 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Pictest (Switch Lever Type, PC Series)
OZAKI MFG (PEACOCK)
[Features]
· Lever-type dial gauge with switch lever.
· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.From: ฿ 3,804.01 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, Back Plunger Type Dial Indicator
MITUTOYO
[Features]
· Dial indicator with the dial face perpendicular to the spindle.
[Applications]
· For mounting onto inspection jigs or for leveling machine tool tables etc.From: ฿ 3,139.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
An essential item for work sites or inspection procedures. Providing low-priced products with excellent cost performance [C-Value]From: ฿ 1,722.58 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Large Dial Gauge, 3/4 Series Long Stroke
MITUTOYO
The scale of this dial gauge has a large surface diameter for easy reading. Models with long measurement ranges are also available. Limit needle and outer frame clamp are included as standard with all models.From: ฿ 3,550.00 Special Price Days to Ship:
2 Day(s)
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, New Pic-test (No Clutch Type, PCN Type)
OZAKI MFG (PEACOCK)
[Features]
· No-latch type with a lever-type dial gauge lacking the most general switching lever.
· The pointer continually rotates clockwise in accordance with the upward and downward movement of the gauge head, improving measurement efficiency for a wide range of applications.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.From: ฿ 4,513.37 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Thickness Gauge (Standard Type)
TECLOCK
Measuring instrument to easily measure thickness and diameter of metals, lenses, rubber, plastics, felt, hair, pearls, etc. in actual dimensions.
[Features]
· Ceramic measuring instruments and anvils have excellent wear resistance, with no need to worry about rust.
[Application]
· For thickness measurement of metals, lenses, rubber, plastics, paper, felt, hair, pearls, etc.From: ฿ 3,388.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge (Inner)
NIIGATA SEIKI (SK)
Dial gauge for inner diameter measurement with a wide application range, including hole diameter measurement, special shape inner diameter measurement (groove), etc.
[Features]
· Useful for measuring hole diameters and special shape inner diameters.
[Applications]
· Inner diameter measuring instrument with a wide application range, including high-precision inner diameter measurement, special shape inner diameter measurement (groove), etc.From: ฿ 5,036.03 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type
MITUTOYO
Dial Indicators Series 2- Metric Standard Type
[FEATURES]
Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.
Standard 0.01 mm graduation dial gauges having an outer frame with an outside diameter of 57 mm. All types come with limit pins and an outer frame clamp as standard.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is resistant to wear and deformation.
Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant.
[Usage]
· For comparative measurement. Installation on jigs.
[Specification]
· Measurement Range (mm): 0 to 10
· Minimum Display (mm): 0.010
· Graduation Specification: 0-100
· Mount Shaft Diameter (mm): 8
·Measuring Force (N): 2.5 or less
·Dial diameter: 57 mmFrom: ฿ 3,750.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MAHR
[Features]
· Fixing bracket (shank) removable structure allows the position to be freely changed.
· Wear-resistant artificial gems are used for the entire internal shaft.
· There are 2 mounting shafts, 6 mm and 8 mm, which can be removed.
· Vibration-proof structure.
· A structure in which the pointer's cover glass can be removed, eliminating time spent repairing any damage to the glass.
· Fixing bracket (shank) removable structure enables work that originally required multiple units to be done with a single unit, making it highly economical.
[Applications]
· General molding industry.
· Research and development work.From: ฿ 4,972.96 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Lever Type Dial Gauge Test Indicator Slope Type
MITUTOYO
[Features]
· A model with the scale plate inclined by 20° with respect to the vertical type.
· Improved visibility
· Easy to read cover plate
· Prevents dust from entering the interior of the scale plate
· The bezel and cover plate are integrated
· The bezel is prevented from coming off
· Multilayer coating is provided on the cover plate
· Prevents the holding part of the stylus from rattling
· Prevents the sensitivity and followability of the stylus from deteriorating
· Inspection report included
· Displays the length of the stylus on the scale board
· Limit pointer can be mounted
· Equipped with φ6 stem with dovetail groove as standard
· Complies with the new JIS B7533:2015From: ฿ 8,369.00 Special Price Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Shaped Dial Gauge (Scale Interval: 0.01 mm)
OZAKI MFG (PEACOCK)
[Features]
· The most widely used dial gauge with scale intervals of 0.01 mm. Select from a wide range of devices to suit the application.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
· Limit stickers are included as standard with all models.From: ฿ 1,477.00 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointer Less Than One Rotation Dial Gauge
OZAKI MFG (PEACOCK)
[Features]
· Dial gauge with scale intervals of 0.01 mm/0.001 mm and a pointer with less than one full rotation.
· The rotation of the pointer is kept to less than 1 turn in order to prevent misreading.
· Choose from an abundance of device models for the dedicated relative measurement dialFrom: ฿ 2,159.56 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Improved abrasion resistance with a probe with a ruby ball.From: ฿ 4,412.47 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Lever type dial gauge test indicator horizontal type
MITUTOYO
[Features]
· A model with the stylus operating direction set horizontally with respect to the scale plate.
· Improved visibility
· Easy to read cover plate
· Prevents dust from entering the interior of the scale plate
· The bezel and cover plate are integrated
· The bezel is prevented from coming off
· Multilayer coating is provided on the cover plate
· Prevents the holding part of the probe from rattling
· Prevents the sensitivity and followability of the probe from deteriorating
· Inspection report included
· Displays the length of the probe on the scale board
· Limit pointer can be mounted
·⌀6 dovetailed stem included as standard
· Complies with the new JIS B7533:2015From: ฿ 6,640.00 Special Price Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, Pocket Type Dial Test Indicator Series 513
MITUTOYO
• Jeweled bearings assure higher sensitivity and accuracy.
Indicator can be mounted by clamping the stem or the body
(except for 513-517WE and 513-517WT).
• Reversible measuring direction (Clutch type).
• Two holding bars are supplied. (Full sets only.)
• Fully adjustable bezel/dial face.
• Stylus is adjustable within 220°.
• Bezel is sealed with on O-ring to keep out water and oil.From: ฿ 3,934.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Small Dial Gauge 1 Series, Outer Frame Diameter φ40 mm Under 1 Turn Type
MITUTOYO
Dial gauge with a compact design. Does not take up space when attached to jigs. Dial gauge developed to prevent reading errors during multiple rotations.From: ฿ 3,184.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type)
MITUTOYO
[Features]
· Uses Mitutoyo's original shockproof mechanism with a buffering mechanism, making it excellent in durability and impact resistance.From: ฿ 2,462.25 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Thickness Gauge (0.01 mm Type)
OZAKI MFG (PEACOCK)
[Features]
· This dial thickness gauge is a handy type measuring instrument operated by a lever that can quickly measure the thickness of small components, rubber, felt, paper, and so on.
· Select from a wide range of device models to suit the application.
· The G and H types have Peacock's greatest feature, an integrated structure of the frame and gauge parts, with superior workability and durabilityFrom: ฿ 2,938.83 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
This type has many measurement depths (insertion depths) and large measurement ranges of 20 mm and 35 mm. Multi-purpose type measuring instrument. J-B type has excellent durability.From: ฿ 17,595.84 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type
MITUTOYO
It is excellent in durability and impact resistance as it adopts Mitsutoyo's unique shock proof mechanism which uses cushioning mechanism. Dial gauge developed to prevent reading errors during multiple rotations.From: ฿ 4,150.00 Special Price Days to Ship:
2 Day(s)
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial comparator (Point Measuring Instrument)
MAHR
· Use: Standard Type
· Display Method: Dial
· Maximum Measuring Length (Adjustment Range) (mm): 0 ~ 1
· Scale Model: Balance scale
· Mounting Shaft diameter (mm): 8From: ฿ 13,151.32 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
TECLOCK
[Features]
· High-precision dial gauge that can be read in units of 0.01 mm.
[Applications]
· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.From: ฿ 1,788.52 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Guideline Microindicator Mumetron
CITIZENSEIMITSU
The Mu-METRON series is a full-fledged industrial measuring instrument designed to meet the high-precision measurement needs, achieving high precision, high sensitivity and high stability. A buffer mechanism is used for outstanding durability and shock resistance as well.From: ฿ 13,502.79 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Pocket Type Dial Test Indicator SERIES 513
MITUTOYO
• Jeweled bearings assure higher sensitivity and accuracy. Indicator can be mounted by clamping the stem or the body (except for 513-517WE and 513-517WT).
• Reversible measuring direction (Clutch type).
• Two holding bars are supplied. (Full sets only.)
• Fully adjustable bezel/dial face.
• Stylus is adjustable within 220°.
• Bezel is sealed with on O-ring to keep out water and oil.From: ฿ 4,450.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge (Outer)
NIIGATA SEIKI (SK)
Dial gauge optimum for high-precision outer diameter measurement.
[Features]
· Measuring instrument for outer diameters.
[Applications]
· Convenient for shaft outer diameter measurement.From: ฿ 8,109.15 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Dial Gauge (Long Stroke Type)
TECLOCK
[Features]
· A shock-absorbing mechanism (shock-proofing) is used to protect the parts of the mechanism, such as gears, in the pursuit of a longer operational life.
· A long stroke dial gauge with measuring ranges of 20 mm and 30 mm.
[Applications]
· For tasks requiring long strokes such as machine dimensioning and incorporation into dedicated machines.From: ฿ 2,065.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Compact Dial Gauge (Back lid with lug type/Flat back lid type)
TECLOCK
[Features]
· Small, lightweight, and easy to use with a high level of precision, it is widely used as a measurement instrument for measuring length in a variety of fields.
[Applications]
· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.From: ฿ 1,907.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
CITIZENSEIMITSU
This smaller compact type can also be installed in even narrower locations. Durability - A ball slide has been adopted for the spindle part to increase the durability. Environmental resistance - Improved dust-proof and drip-proof properties. Safe for use in machining/assembling sites, etc. as well.From: ฿ 20,911.24 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Caliper Gauge LA (Outer) Type
OZAKI MFG (PEACOCK)
[Features]
· A simple measuring instrument ideal for measuring outer diameter and thickness of parts that are generally considered to be difficult to measure.
· Choose from a wide range of models with scale intervals of 0.1 mm, 0.05 mm, and 0.01 mm.
· High precision with a wide measurement range.
· We have produced many custom-made products according to customers' applications.From: ฿ 12,095.00 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Small Diameter SERIES 1-Compact Type
MITUTOYO
• Compact dial indicators with bezel diameters of ø31 or ø36mm for restricted-space applications in gaging jigs.From: ฿ 4,134.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Regular Dial Gauge (Back Plunger Type)
MITUTOYO
[Features]
· The back plunger type dial gauge is suitable for leveling tables used for machine tools or the like, and for installation on inspection machine jigs and in narrow areas. The standard dial gauge is suitable for places where it is hard to see the scale plate.
· Uses Mitutoyo's original shockproof mechanism with a buffering structure, making it excellent in durability and impact resistance.From: ฿ 5,307.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MITUTOYO
• Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes.
• Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils.
• Anvil retracting stroke: 2mm/.080” Anvil positioning range: 25mm/ 1”
• Adjustment nut: adjusts the measuring range.
• Clamp: adjustment nut
• Flatness of measuring face: 1μm
• Stability of indication: 2μm or less (stability of indicators is not included)
• The dial indicator and protection cover are optional. Also, some dial indicators and protection covers cannot be used with the dial snap gage.From: ฿ 15,470.04 Special Price Days to Ship:
50 Day(s)
50 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025SERIES 1 — Compact Type, Small Diameter
MITUTOYO
• Compact dial indicators with bezel diameters of ø40mm for
restricted-space applications in gaging jigs.From: ฿ 3,384.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/20252 Series Standard Dial Gauge (Guide Adjustment Type)
MITUTOYO
Rotate the head knob to adjust the pointer position independent of the vertical movement of the spindle.From: ฿ 3,617.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TECLOCK
[Features]
· High-precision dial gauge that can be read in units of 0.1 mm.
[Applications]
· For use in areas with limited space, such as sizing of machinery and assembly into dedicated machines.
· Used for rough dimension measurement of woodwork and rubber material and judgment of deviation in dimensions.From: ฿ 2,355.22 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TECLOCK
[Features]
· It has improved sensitivity for dimensional displacement compared to a dial gauge.
· The probe and indicator are made from non-magnetic materials, so they are not influenced by the magnetic force.
· Using an auto-clutch mechanism without a switching lever, the measuring direction is switched automatically between forward and reverse.
· The probe can be set to an arc angle of 220°.
[Applications]
· For measuring the exterior, interior, grooves and finding the center.From: ฿ 4,795.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Shaped Dial Gauge (Scale Interval: 0.001 mm)
OZAKI MFG (PEACOCK)
The most widely used dial gauge with scale intervals of 0.001/0.005 mm. Select from a wide range of devices to suit the application.
[Features]
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
· Limit stickers are included as standard with all models.From: ฿ 3,580.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long stroke dial gauge Graduation: 0.01mm, 0.05mm, 0.1mm
OZAKI MFG (PEACOCK)
[Features]
· The most widely used long stroke dial gauge with scale intervals of 0.01 mm/0.05 mm/0.1 mm. With spindle lifting lever, middle 2 needle type is also available.
· Select from a wide range of device models to suit the application.
· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
· Limit stickers are included as standard with all models.
· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.From: ฿ 3,007.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
New Pic Test for Low Pressure (E Series)
OZAKI MFG (PEACOCK)
[Features]
· Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).
· No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.
· Uses a green scale plate that is easy on the eyes.
· Highly sensitive, enabling measurement at low measurement power.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
· Try it out if you are having trouble with errors due to the effects of measuring forceFrom: ฿ 4,755.35 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Non-Magnetic/Non-Energization New Pic-Test (U Series)
OZAKI MFG (PEACOCK)
[Features]
· Gauge heads and pointers are non-magnetic, so they are not affected by magnetic environments.
· The use of ceramic stems achieves non-conductivity, allowing use in electric discharge machines, etc.
· Easy to read light blue scale.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
· Improved abrasion resistance with a probe with a ruby ball.From: ฿ 5,160.60 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Dial Thickness Gauge (0.001 mm Type)
OZAKI MFG (PEACOCK)
[Features]
· Thickness gauge with scale intervals of 0.001 mm.
· Ideal for measuring the thickness of precise small objects, films, special fabrics, etc.
· Available with two measurement ranges, 0 to 1 mm or 0 to 5 mmFrom: ฿ 6,987.48 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
[Features]
· Ideal for measuring the thickness of paper, urethane, vinyl, rubber, etc.
· There are 3 types of measurement depths (insertion depths), 300 mm, 500 mm, and 690 mm, allowing for easy measurement of thickness even for large workpiecesFrom: ฿ 30,818.86 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Inside Gauge Replacement Lot for U Series
OZAKI MFG (PEACOCK)
A replacement rod for use with the U Series Dial Inside Gauge.
[Features]
· Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.From: ฿ 15,454.20 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
Dial gauge for high cost performance model.
[Features]
· The most widely used dial gauge with scale intervals of 0.01 mm. Equipped with limit probe.
· An O-ring is used to prevent ingress of water or oil from the gap between the external and internal frames.
· Uses jewel bearings for the bearing part.
· Yellow scale plate.
· Comes with two back covers, a flat type and a type with lug.
[Features]
· Measurement of plane contour and workpiece mounting quality evaluation.
· Used for displacement measurements such as shaft runout and perpendicularity, etc.From: ฿ 1,867.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MITUTOYO
• Designed for quick GO/NG judgment of diameters of cylinders and shafts in machining processes.
• Wide (13.5 x 12mm/ 1.53 x 47”), flat carbide anvils.
• Anvil retracting stroke: 2mm/.080”Anvil positioning range: 25mm/ 1”
• Adjustment nut: adjusts the measuring range.
• Clamp: adjustment nut
• Flatness of measuring face: 1μm
• Stability of indication: 2μm or less (stability of indicators is not included)
• The dial indicator and protection cover are optional. Also, some dial indicators and protection
covers cannot be used with the dial snap gage.From: ฿ 13,953.36 Special Price Days to Ship:
2 Day(s)
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Test Indicator SERIES 513 — Universal Type
MITUTOYO
Universal application to all directions. (Not only the direction of the measuring point,
but also the direction of measurement itself can be adjusted 360 degrees without
moving the indicator.)From: ฿ 13,350.00 Special Price Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
SHINWASOKUTEI
A dial test indicator for measuring flatness, parallelism and eccentricity.
[Features]
· Includes two convenient stem types.
· The stem attached to the dovetail groove can be used to retain magnetic stands.From: ฿ 3,460.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Dial Gauge, 7 / 547 Series Thickness Gauge, Dial Type
MITUTOYO
The thickness of small item parts, paper, felt, and so on can be measured quickly with one touch with this dial thickness gauge. Ceramic is used for the gauge heads and anvil, so there are no concerns about rusting.From: ฿ 3,700.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Standard Dial Gauge 2 Series (Registering Pointer Type)
MITUTOYO
A mechanism holds the pointer and the spindle where the spindle is pushed, and the pointer displays the maximum value and stops.From: ฿ 3,584.00 Special Price Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Gauge, Indicating Micrometer
MAHR
[Features]
· With lock function.
· It comes with a thermal insulation cover.
· Capable of comparative measurements in 1 µm increments, impossible with micrometers.
· Stable measurement is possible by adopting a 1003 Millimess dial gauge.
· A high-quality configuration suitable for high-precision measurement that can detect errors at a 1 μm level.
[Applications]
· For the measurement of precision components that require high precision.From: ฿ 56,648.60 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 4,040.32 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TECLOCK
An inner caliper gauge that measures the inner diameter of cylindrical workpieces and the groove diameter at the back.
[Features]
·The groove diameter of the O-ring can also be measured by improving the replacement stylus.
·By exchanging the attached replacement stylus, it is possible to perform comparative measurements within ±1 mm of the set dimension (indication range of 2 mm).
·Standard dimensions are set using a micrometer or ring gauge within the measurement range.
·A set of two replacement probes is included.
[Applications]
·Comparative measurement of the inner diameter of a cylindrical object and the groove diameter at the back.From: ฿ 9,259.00 Days to Ship:
17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
CITIZENSEIMITSU
[Features]
·Large, easy-to-read display.
·Rubber bellows can be installed as an option on the 2S type.From: ฿ 16,795.44 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OBISHI KEIKI SEISAKUSHO
[Features]
· Equipped with a fine motion mechanism that makes it easy to move a very small dial gauge.
· The base was manufactured using high quality black gabbro.
· Minimal secular change and temperature fluctuations, with excellent hardness and wear resistance.From: ฿ 42,250.33 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OBISHI KEIKI SEISAKUSHO
[Features]
· A hardened plate with relief grooves is installed to the top surface of the base.
· The arm can be inserted and removed, enabling measurement at any position on the base board surface.From: ฿ 22,057.45 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
New Pic-Test (without Stem, V-Series)
OZAKI MFG (PEACOCK)
Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.From: ฿ 4,441.00 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pictest (Double Sided Type, W Series)
OZAKI MFG (PEACOCK)
A double-sided lever type dial gauge that is very useful for work piece centering measurement. It is provided with a gauge damage prevention measurement probe. By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.From: ฿ 7,511.60 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pic Test for Low Pressure (E Series)
OZAKI MFG (PEACOCK)
[Features]
· Lever-type dial gauge with super low pressure measuring force (0.05 N / 0.1 N).
· No-clutch type (PCN) and switching lever type (PC) are available as a selection of 0.01 mm or 0.002 mm options.
· Uses a green scale plate that is easy on the eyes.
· Highly sensitive, enabling measurement at low measurement power.
· The gauge damage prevention probe is provided on all models.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.
· Try it out if you are having trouble with errors due to the effects of measuring forceFrom: ฿ 3,910.14 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Thickness Gauge (Roller Attached Type)
OZAKI MFG (PEACOCK)
Paper, rubber, film and items of similar thickness are held between the upper and lower rollers, taking a continuous measurement of thickness.From: ฿ 26,765.05 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Easy measurement of the thickness of rough surfaces, crescent-shaped lenses, or flat surfaces. Replace the gauge head and anvil to measure plane thickness. Flat probe included.From: ฿ 4,074.00 Days to Ship:
47 Day(s)
47 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Suitable for measuring the inner thickness of pipe shapes and the thickness of curved workpieces. Special shapes can also be manufactured for the gauge heads and anvil part.From: ฿ 3,812.34 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
RIKEN KEISOKUKI
[Features]
· The flatness of the measuring surface is 0.002 mm.
· Stone base does not rust, has incredible wear-resistance, and can be maintained easily.
· The dial gauge mounting hole is φ8.From: ฿ 26,396.28 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025MITUTOYO
One series / small dial gauge, compact design dial gauge. Does not take up space when attached to jigs. Balance Scale, Back Lid with LugsFrom: ฿ 5,900.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
BLUEBIRD
[Description]
· To be attached to a magnetic base for measuring the surface accuracy of a machined object.From: ฿ 894.19 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Standard One Revolution Type for Error-free Reading-SERIES 2
MITUTOYO
• Mitutoyo’s unique shock-proof mechanism is incorporated, providing improved resistance to shock due to sudden spindle retraction caused by impact.
• This series has been developed to eliminate the possibility of reading errors due tomiscounting multiple revolutions.
• The dead zone in red indicates “accuracy not guaranteed”.From: ฿ 3,983.33 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
CITIZENSEIMITSU
[Features]
·Large, easy-to-read display.
·A signal indicator that incorporates electrical contacts in a microindicator.
·Can output a signal that distinguishes the measurement state in 3 stages/5 stages.From: ฿ 29,839.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Lever type dial gauge test indicator vertical type
MITUTOYO
[Features]
· A model in which the scale plate is vertical with respect to the stylus shaft.
· Improved visibility
· Easy to read cover plate
· Prevents dust from entering the interior of the scale plate
· The bezel and cover plate are integrated
· The bezel is prevented from coming off
· Multilayer coating is provided on the cover plate
· Prevents the holding part of the probe from rattling
· Prevents the sensitivity and followability of the probe from deteriorating
· Inspection report included
· Displays the length of the probe on the scale board
· Limit pointer can be mounted
·⌀6 dovetailed stem included as standard
· Complies with the new JIS B7533:2015From: ฿ 8,058.00 Special Price Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe
NIIGATA SEIKI (SK)
A non-conductive dial indicator that allows for easy measurements in narrow and deep spaces.
[Features]
· Includes inspection report.
· A ruby is embedded in the measurement probe.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings, ensuring excellent accuracy and durability.
· The round ruby probe provides excellent abrasion resistance and does not conduct electricity or become magnetically charged.
· Uses a green scale plate for improved visibility.
[Applications]
· Inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 4,271.97 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Indicator (0 To 0.8 mm / 0.01‑mm Graduations)
NIIGATA SEIKI (SK)
A handy dial gauge for measuring unevenness and straightness, etc., in tight spaces where use of typical dial gauges is not possible.
[Features]
· Includes inspection report.
· Measurements can be taken easily in places that cannot be measured using a typical dial gauge such as in narrow or deep spaces.
· Uses jewel bearings for each of the bearings.
· Uses a green scale plate for improved visibility.
· Lever-type dial gauge.
· The main body is made of steel.
[Applications]
· Used for inside and outside measurements and to measure groove widths, centering, parallelism, flatness, etc.From: ฿ 3,013.31 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025SERIES 1 — Compact Type, Small Diameter
MITUTOYO
• Compact dial indicators with bezel diameters of ø31 or ø36mm
for restricted-space applications in gaging jigs.From: ฿ 6,267.00 Special Price Days to Ship:
2 Day(s)
2 Day(s)
-
You can add up to 6 items per a category to the compare list.
Standard Type Dial Gauge 73750
SHINWASOKUTEI
A dial gauge for measuring flatness, parallelism and eccentricity.
[Features]
· Comes with a lug for convenient attachment to the magnet stand.
[Applications]
· Used for measurement of flatness, parallelism, and eccentricity, and for comparative measurement.From: ฿ 1,109.02 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
NIIGATA SEIKI (SK)
Dial gauge that measures the hardness of rubber and plastics, conforming to JIS and ISO standards.
[Features]
· Conforms to the following standards regarding the shape of the pushing needle, dimensions of the pressing surface, and spring force.
· JIS K 6253 (hardness test method for vulcanized rubber).
· ISO 7619 (E).
[Applications]
· It is used as a hardness meter to measure the hardness of rubber/plastic.From: ฿ 6,981.28 Days to Ship:
15 Day(s)
15 Day(s)
-
You can add up to 6 items per a category to the compare list.
TECLOCK
A dial gauge with a scale plate set parallel to the measuring surface.
[Features]
·A type in which the scale plate is parallel to the measuring surface and can be viewed from above.
·Convenient for gear tooth bottom measurement and runout measurement.
[Applications]
·Unlike general dial gauges, it can be used in narrow spaces.
·For leveling smooth surfaces and reading from the front of the measurement point.From: ฿ 3,917.99 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OBISHI KEIKI SEISAKUSHO
Comes with 2 brackets. It is ideal for measuring pipes and other wall thickness. Has cast iron base.From: ฿ 23,536.70 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Compact Dial Gauge (Measurement Range 1 to 5 mm)
OZAKI MFG (PEACOCK)
Compact dial gauge with small surface diameter. Does not take up space for multipoint measurement or mounting to a jig, etc.From: ฿ 2,422.41 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Standard Shaped Dial Gauge (Scale Interval: 0.005 mm)
OZAKI MFG (PEACOCK)
[Features]
· The most widely used dial gauge with scale intervals of 0.001/0.005 mm.
· Select from a wide range of devices to suit the application.
· With an O-ring used to prevent ingress of water or oil from the gap between the external and internal frames, it features excellent waterproofing.
· By using SK hardened steel, the stem possesses a high strength that is resilient even for severe use.
· Gears are protected from sudden upward pressure from the spindle by the shock proofing mechanism.
· Limit stickers are included as standard with all models.From: ฿ 6,902.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Back Plunger Type Dial Indicator
OZAKI MFG (PEACOCK)
[Features]
· A dial gauge with a spindle that operates at an angle perpendicular to the pointer scale.
· The back plunger dial gauge is appropriate for use as a level for machining tool tables or in cramped locations where scale plates are difficult to see.
· Multipoint measurement jig.
· Suitable for installation to inspection jigs.From: ฿ 3,626.71 Days to Ship:
4 Day(s)
4 Day(s)
-
You can add up to 6 items per a category to the compare list.
Surface Dial, New Peak Test (D Series)
OZAKI MFG (PEACOCK)
[Features]
· The display is enlarged by approximately 30% for better visibility.
· The long stem (screw-in type) has been standardized.
· Select from 0.01 mm, 0.002 mm, or 0.001 mm types.
· The gauge damage prevention probe is provided on all models.
· D type in which the display can be seen clearly even from a distance.
· Surface diameter φ46.5.
· Easy to read the minimum display.From: ฿ 4,592.08 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pictest (without Stem, V Series)
OZAKI MFG (PEACOCK)
Miniature bearings are used for the bearings of the fulcrum portion of the gauge heads to reduce the effects of rod play and achieve excellent indicating stability.From: ฿ 3,788.96 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
[Features]
· The 0-0 Pic Test is a dedicated device for centering, parallelism, and other referencing work.
· Moreover, it is a low priced product.
· The scale plate of the 0-0 Pic Test is only for zero point, so it can be mounted with probes of varying lengths and shapes depending on the desired use.
· Pointer rotation is set at less than one full rotation to eliminate reading error.
· The gauge damage prevention probe is provided on all models.
· Gauge heads are not affected by angle errors caused by the contact angleFrom: ฿ 2,694.28 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointer Less than One Rotation New Pick Test (Z Series)
OZAKI MFG (PEACOCK)
[Features]
· Miniature bearings are used in the fulcrum portion of the gauge heads to realize excellent durability and sensitivity.
· Bearing jewel used in all bearings provides outstanding indicating sensitivity.
· An O-ring is used for the rotating part of the external frame, providing reinforced oil resistance.
· It has a measurement probe and a groove to prevent gauge damage, so even if force is applied in a horizontal direction, the probe will break at the grooved point, and the gauge body is protected.
· Because it is a no-clutch type, an auto-reverse rotation operating method is adopted so that the indicating needle always rotates clockwise, whether movement is forward or backward.
· By adopting a balancing needle, errors due to difference in posture (gauge mounting direction) are minimized.From: ฿ 3,756.70 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
A dial-type thickness (outer diameter) measuring device which can be used in the same way as a micrometer. To measure, push down the knob with a finger and clamp the measuring object.From: ฿ 7,388.36 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
Ideal for measuring the internal diameters of relatively large holes and internal wall surfaces.From: ฿ 7,800.24 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
OZAKI MFG (PEACOCK)
[Features]
· Ideal for dimensional inspection of precision parts, thickness measurement of experimental samples, rubber, leather, cloth and plastic products.
· Since the table can be moved vertically, it is easy to set up the objects to be measured.
· We manufacture various products such as rubber, leather, urethane, film, etc. using a constant pressure thickness measuring weight assembly method conforming to JIS standardsFrom: ฿ 13,364.22 Days to Ship:
45 Day(s)
45 Day(s)
-
You can add up to 6 items per a category to the compare list.
Dial Caliper Gauge LB (Inner) Type
OZAKI MFG (PEACOCK)
[Features]
· A simple measuring instrument ideal for measuring the inner diameter and groove width of parts generally considered to be difficult to measure.
· Choose from a wide range of models with scale intervals of 0.1 mm and 0.01 mm.
· LB-7.
· Handy moving frame type.
· LB-7S.
· Handy moving frame type.
· LB-7V.
· Handy moving frame type.
· Various special products have been created to suit various applications. Contact us for details.From: ฿ 15,550.49 Days to Ship:
45 Day(s)
45 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Application |
| Scale interval minimal display(mm) |
| Display Method |
| Maximum Measurement Length (Range Selection)(mm) |
| Waterproof Function |
| Output terminal for measuring data: with or without |
| Scale type |
| Calibration Certificate |
You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.              | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.       | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025       | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | OZAKI MFG (PEACOCK) | MITUTOYO | MISUMI | MITUTOYO | OZAKI MFG (PEACOCK) | TECLOCK | NIIGATA SEIKI (SK) | MITUTOYO | MAHR | MITUTOYO | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | MITUTOYO | MAHR | TECLOCK | CITIZENSEIMITSU | MITUTOYO | NIIGATA SEIKI (SK) | TECLOCK | TECLOCK | CITIZENSEIMITSU | OZAKI MFG (PEACOCK) | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | TECLOCK | TECLOCK | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | NIIGATA SEIKI (SK) | MITUTOYO | MITUTOYO | SHINWASOKUTEI | MITUTOYO | MITUTOYO | MAHR | TECLOCK | TECLOCK | CITIZENSEIMITSU | OBISHI KEIKI SEISAKUSHO | OBISHI KEIKI SEISAKUSHO | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | RIKEN KEISOKUKI | MITUTOYO | BLUEBIRD | MITUTOYO | CITIZENSEIMITSU | MITUTOYO | NIIGATA SEIKI (SK) | NIIGATA SEIKI (SK) | MITUTOYO | SHINWASOKUTEI | NIIGATA SEIKI (SK) | TECLOCK | OBISHI KEIKI SEISAKUSHO | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) | OZAKI MFG (PEACOCK) |
| Product Series | Dial Gauge SERIES 2 - Standard Type, 0.01mm And 0.001 Graduation | Small Dial Gauge 1 Series, Outer Frame Diameter φ31 mm, φ36 mm, φ40 mm Type | Regular Dial Gauge 2 Series, Waterproof Type, Scale Interval 0.01 / 0.001 mm Type | Small Dial Gauge 1 Series, Outer Frame Diameter φ40 mm Under 1 Turn Type | 2 Series Regular Dial Gauge (Less than 1 Rotation Type / Lightweight Type) | 2 Series Standard Dial Gauge Less Than 1 Rotation / Waterproof Type | Compact Dial Gauge (Back lid with lug type/Flat back lid type) | Standard One Revolution Type for Error-free Reading-SERIES 2 | Dial Indicator (0 To 0.02 mm / 0.002‑mm Graduations), Ruby Measurement Probe | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 1,368.34 Special Price On Sale Until 31/03/2025 | ฿ 4,218.44 Special Price On Sale Until 31/03/2025 | ฿ 2,400.00 Special Price On Sale Until 31/03/2025 | ฿ 2,116.66 Special Price On Sale Until 31/03/2025 | ฿ 2,766.67 Special Price On Sale Until 31/03/2025 | ฿ 3,804.01 | ฿ 3,139.00 Special Price On Sale Until 31/03/2025 | ฿ 1,722.58 | ฿ 3,550.00 Special Price On Sale Until 31/03/2025 | ฿ 4,513.37 | ฿ 3,388.00 | ฿ 5,036.03 | ฿ 3,750.00 Special Price On Sale Until 31/03/2025 | ฿ 4,972.96 | ฿ 8,369.00 Special Price On Sale Until 31/03/2025 | ฿ 1,477.00 | ฿ 2,159.56 | ฿ 4,412.47 | ฿ 6,640.00 Special Price On Sale Until 31/03/2025 | ฿ 3,934.00 Special Price On Sale Until 31/03/2025 | ฿ 3,184.00 Special Price On Sale Until 31/03/2025 | ฿ 2,462.25 Special Price On Sale Until 31/03/2025 | ฿ 2,938.83 | ฿ 17,595.84 | ฿ 4,150.00 Special Price On Sale Until 31/03/2025 | ฿ 13,151.32 | ฿ 1,788.52 | ฿ 13,502.79 | ฿ 4,450.00 Special Price On Sale Until 31/03/2025 | ฿ 8,109.15 | ฿ 2,065.00 | ฿ 1,907.00 | ฿ 20,911.24 | ฿ 12,095.00 | ฿ 4,134.00 Special Price On Sale Until 31/03/2025 | ฿ 5,307.00 Special Price On Sale Until 31/03/2025 | ฿ 15,470.04 Special Price On Sale Until 31/03/2025 | ฿ 3,384.00 Special Price On Sale Until 31/03/2025 | ฿ 3,617.00 Special Price On Sale Until 31/03/2025 | ฿ 2,355.22 | ฿ 4,795.00 | ฿ 3,580.00 | ฿ 3,007.00 | ฿ 4,755.35 | ฿ 5,160.60 | ฿ 6,987.48 | ฿ 30,818.86 | ฿ 15,454.20 | ฿ 1,867.00 | ฿ 13,953.36 Special Price On Sale Until 31/03/2025 | ฿ 13,350.00 Special Price On Sale Until 31/03/2025 | ฿ 3,460.00 | ฿ 3,700.00 Special Price On Sale Until 31/03/2025 | ฿ 3,584.00 Special Price On Sale Until 31/03/2025 | ฿ 56,648.60 | ฿ 4,040.32 | ฿ 9,259.00 | ฿ 16,795.44 | ฿ 42,250.33 | ฿ 22,057.45 | ฿ 4,441.00 | ฿ 7,511.60 | ฿ 3,910.14 | ฿ 26,765.05 | ฿ 4,074.00 | ฿ 3,812.34 | ฿ 26,396.28 | ฿ 5,900.00 Special Price On Sale Until 31/03/2025 | ฿ 894.19 | ฿ 3,983.33 Special Price On Sale Until 31/03/2025 | ฿ 29,839.00 | ฿ 8,058.00 Special Price On Sale Until 31/03/2025 | ฿ 4,271.97 | ฿ 3,013.31 | ฿ 6,267.00 Special Price On Sale Until 31/03/2025 | ฿ 1,109.02 | ฿ 6,981.28 | ฿ 3,917.99 | ฿ 23,536.70 | ฿ 2,422.41 | ฿ 6,902.00 | ฿ 3,626.71 | ฿ 4,592.08 | ฿ 3,788.96 | ฿ 2,694.28 | ฿ 3,756.70 | ฿ 7,388.36 | ฿ 7,800.24 | ฿ 13,364.22 | ฿ 15,550.49 |
| Days to Ship | Same day | Same day | 5 Day(s) | 4 Day(s) | Same day | Same day | Same day | Same day | 2 Day(s) | Same day | 1 Day(s) | Same day | Same day | Same day | 12 Day(s) | 4 Day(s) | Same day | 45 Day(s) | 10 Day(s) | Same day | Same day | Same day | 5 Day(s) | 4 Day(s) | 2 Day(s) | 45 Day(s) | Same day | Same day | 5 Day(s) | 45 Day(s) | 5 Day(s) | 3 Day(s) | Same day | 4 Day(s) | Same day | 45 Day(s) | 50 Day(s) | 45 Day(s) | 5 Day(s) | Same day | Same day | 3 Day(s) | Same day | Same day | Same day | 45 Day(s) | 45 Day(s) | 45 Day(s) | Same day | 2 Day(s) | 3 Day(s) | Same day | 45 Day(s) | 45 Day(s) | 45 Day(s) | Same day | 17 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 47 Day(s) | 45 Day(s) | 45 Day(s) | 5 Day(s) | 45 Day(s) | 5 Day(s) | 12 Day(s) | 12 Day(s) | 45 Day(s) | 15 Day(s) | 2 Day(s) | 45 Day(s) | 15 Day(s) | 45 Day(s) | 45 Day(s) | Same day | 5 Day(s) | 4 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) | 45 Day(s) |
| Application | Standard Type | - | Standard Type | Standard Type | Standard Type | Lever Type (Indicator) | Standard Type | Standard Type | Standard Type | Lever Type (Indicator) | Thickness type | Caliper Type | Standard Type | Lever Type (Indicator) | - | Standard Type | Standard Type | Standard Type | - | Standard Type | Standard Type | Standard Type | Thickness type | Thickness type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Caliper Type | Standard Type | Standard Type | Standard Type | Caliper Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Standard Type | Lever Type (Indicator) | Standard Type | Standard Type | Lever Type (Indicator) | Lever Type (Indicator) | Thickness type | Thickness type | Standard Type | Standard Type | Standard Type | Standard Type | Lever Type (Indicator) | Thickness type | Standard Type | Thickness type | Lever Type (Indicator) | Caliper Type | Standard Type | Dial Gauge Stand | Dial Gauge Stand | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Thickness type | Thickness type | Thickness type | Dial Gauge Stand | Standard Type | Standard Type | - | Lever Type (Indicator) | - | Lever Type (Indicator) | Lever Type (Indicator) | Standard Type | Standard Type | Standard Type | Standard Type | Dial Gauge Stand | Standard Type | Standard Type | Standard Type | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Lever Type (Indicator) | Thickness type | Standard Type | Dial Gauge Stand | Caliper Type |
| Scale interval minimal display(mm) | 0.001 ～ 0.01 | 0.001 ～ 0.01 | 0.01 | 0.001 ～ 0.01 | 0.001 ～ 0.1 | 0.002 ～ 0.01 | 0.01 | 0.001 | 0.001 ～ 0.01 | 0.001 ～ 0.01 | 0.01 | 0.01 ～ 0.025 | 0.001 ～ 0.01 | 0.002 ～ 0.01 | 0.01 | 0.01 | 0.001 ～ 0.01 | 0.01 | 0.01 | - | 0.001 ～ 0.01 | 0.02 | 0.01 | 0.01 ～ 0.05 | 0.001 ～ 0.01 | 0.0005 ～ 0.001 | 0.01 | 0.5 ～ 1 | - | 0.01 ～ 0.025 | 0.01 | 0.01 ～ 0.1 | 10 | 0.01 ～ 0.1 | 0.01 | - | - | - | 0.01 | 0.1 | 0.001 ～ 0.01 | 0.001 | 0.01 ～ 0.1 | 0.002 ～ 0.01 | 0.001 ～ 0.01 | 0.001 | 0.01 ～ 0.05 | 0.01 | 0.01 | - | - | 0.01 | 0.001 ～ 0.01 | 0.01 | 0.001 | 0.002 ～ 0.01 | 0.01 | 2 ～ 10 | - | - | 0.001 ～ 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | - | 0.002 | 0.01 | 100-0-100 | 0.001 | 0.002 ～ 0.01 | 0.002 | 0.01 | - | 0.01 | - | 0.01 | - | 0.001 ～ 0.01 | 0.005 | 0.01 | 0.001 ～ 0.01 | 0.002 ～ 0.01 | - | 0.002 ～ 0.01 | 0.05 | 0.01 | 0.001 ～ 0.01 | 0.01 ～ 0.1 |
| Display Method | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial | Dial |
| Maximum Measurement Length (Range Selection)(mm) | 0–1 ～ 6~20 | - | 0~20 ～ 21 to 50 | 0–1 ～ 1.1 to 5 | 0~0.8 ～ 1.1 to 5 | 0–1 | - | 0–1 | 0–1 ～ 51 to 100 | 0–1 ～ 1.1 to 5 | 6~20 | 6~20 ～ 51 to 100 | 0–1 ～ 1.1 to 5 | 0–1 | - | 0–1 ～ 6~20 | 0–1 | 0–1 | - | - | 0–1 | 0–1 ～ 1.1 to 5 | 6~20 | 6~20 ～ 21 to 50 | 0–1 | 0–1 | 1.1 to 5 ～ 6~20 | - | - | 6~20 ～ 21 to 50 | 6~20 ～ 21 to 50 | 1.1 to 5 ～ 6~20 | - | 6~20 ～ 101 or More | - | - | - | - | 6~20 | 6~20 | 0–1 | 0–1 ～ 1.1 to 5 | 6~20 ～ 51 to 100 | 0–1 | 0–1 | 0–1 ～ 1.1 to 5 | 6~20 ～ 21 to 50 | 101 or More | 6~20 | - | - | 0–1 | 0–1 ～ 6~20 | 6~20 | 21 to 50 | 0–1 | 21 to 50 ～ 101 or More | - | 6~20 | 101 or More | 0–1 | 0–1 | 0–1 | 6~20 | 6~20 | 6~20 | - | 0–1 | 6~20 ～ 21 to 50 | 0~0.8 ～ 0~15 | - | - | 0–1 | 0–1 | - | 6~20 | - | 1.1 to 5 | 101 or More | 0–1 ～ 1.1 to 5 | 1.1 to 5 | 1.1 to 5 | 0–1 | 0–1 | - | 0–1 | 21 to 50 | 51 to 100 ～ 101 or More | 1.1 to 5 ～ 6~20 | 21 to 50 ～ 101 or More |
| Waterproof Function | Available / NA | - | Available / NA | NA | NA | Available | - | NA | NA | Available | - | NA | Available | - | - | Available | - | NA | - | - | NA | NA | - | - | Available | - | - | - | - | NA | - | - | - | - | - | NA | - | - | NA | - | - | Available | - | - | - | - | - | - | - | - | - | NA | NA | NA | - | - | - | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | NA | NA | - | NA | NA | - | - | - | Available | - | - | Available | - | - | - | - | - | - |
| Output terminal for measuring data: with or without | NA | - | NA | NA | NA | - | - | NA | NA | - | - | NA | NA | - | - | - | - | NA | - | - | NA | NA | - | - | NA | - | - | - | - | NA | - | - | - | - | - | - | - | - | NA | - | - | - | - | - | - | - | - | - | NA | - | - | NA | NA | NA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | NA | - | NA | NA | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Scale type | Continuous Scale / Balance Scale / Reverse Scale | - | Continuous Scale / Reverse Scale | Continuous Scale / Balance Scale | Balance Scale | Balance Scale | Balance Scale | Continuous Scale | Continuous Scale / Balance Scale | Balance Scale | Continuous Scale | Continuous Scale | Continuous Scale / Balance Scale | Balance Scale | - | Continuous Scale / Reverse Scale | Balance Scale | Balance Scale | - | - | Balance Scale | Balance Scale | Continuous Scale | Continuous Scale | Balance Scale | Balance Scale | Continuous Scale | Balance Scale | - | Continuous Scale | Continuous Scale | Continuous Scale | Balance Scale | Continuous Scale | - | Balance Scale | - | - | Continuous Scale | Continuous Scale | Balance Scale | Continuous Scale / Balance Scale | Continuous Scale / Reverse Scale | Balance Scale | Balance Scale | Continuous Scale | Continuous Scale | Balance Scale | - | - | - | Balance Scale | Continuous Scale | Continuous Scale | Balance Scale | Balance Scale | Continuous Scale | Balance Scale | Balance Scale | Continuous Scale | Balance Scale | Balance Scale | Balance Scale | Continuous Scale | Continuous Scale | Continuous Scale | - | Balance Scale | - | Balance Scale | Balance Scale | - | Balance Scale | Balance Scale | - | Continuous Scale | Continuous Scale | Continuous Scale | Continuous Scale | Continuous Scale / Balance Scale | Continuous Scale | Continuous Scale / Reverse Scale | Balance Scale | Balance Scale | Continuous Scale | Balance Scale | Continuous Scale | Balance Scale | Continuous Scale / Balance Scale | Continuous Scale |
| Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | No | No | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Dial Gauges
-
- Vernier Calipers
- Micrometers
- Dial Gauges
- Height Gauges
- Depth Gauges
- Inner Diameter Measuring Instruments
- Gauges
- Squares
- Scales
- Tape Measures
- Tape Measures
- Weighing Instruments
- Goniometers
- Optical Devices
- Level Gauges
- Laser Measuring Instruments
- Magnet-Related
- Surface Plates
- Tally Counters
- Gas Measuring Instruments / Detectors
- Scribing Tips
- Stopwatches/Timers
- Tension Gauges
- Pressure Gauges
- Thermometers/Hygrometers
- Environment Measuring Instruments
- Microscopes
- Hardness Meters
- Vibration Meters / Tachometers
- Water Quality / Moisture Measuring Instruments
- Electric Measuring Instruments / Testers
- Viscometers
- Film Thickness Gauges / Detectors
- Flow Meters
- Eccentricity Measuring Instruments
- Surface Roughness Testers
- Sound Detectors
- Data Measurement Equipment
-
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?