(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Chamfer, V-Grooves（Application：Centering (Positioning)）
[What is a chamfering tool?]
A tool for chamfering of drill holes, etc., which is used for removing burrs on the hole's surface. There are end mills for chamfering, chamfering cutters, inner radius cutters, etc., depending on the application.
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 42
- 45
- 46
- 50
- 55
- 56
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 69 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
OSG
TiN coating enables higher speed and longer service life compared to NC-LDSFrom: ฿ 491.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024FUKUDA
A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.From: ฿ 1,870.66 Special Price Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.From: ฿ 1,811.61 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
2-flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 3,851.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).From: ฿ 271.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining styleFrom: ฿ 1,360.26 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,519.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.From: ฿ 3,261.47 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
[Features]
・ This drill increases processing speed for both centering and countersinking. Constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life.
・AD-LDS 60°、90°、120°、130°、140°（φ0.5～φ12）From: ฿ 1,312.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.From: ฿ 1,723.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating propertiesFrom: ฿ 2,338.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burrFrom: ฿ 1,854.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Leading Drill, Carbide FX Coating FX-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.From: ฿ 2,179.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.From: ฿ 2,975.70 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of WorkpiecesFrom: ฿ 2,168.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
MISUMI
The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.From: ฿ 1,841.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 3,031.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.From: ฿ 1,547.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 656.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Versatile center chamfer cutter.
[Features]
· Since the outer diameter and the shank diameter are the same, workpiece interference is prevented.
· Can be used for a wide range of applications.From: ฿ 1,481.81 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 1,907.70 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide Long Type
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.From: ฿ 2,372.05 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Toglon Hard SP 90° ALD Coating
IWATA TOOL
[Features]
· Possible to machine HRC 40 to 72 hardened steel.
· Demonstrates incomparable performance against hardened steel, die steel, Kovar, and Hastelloy, etc.
· Maximum surface roughness can be achieved due to high helix shape.
· Amazing long lifespan due to 3-flute and long cutting edges.From: ฿ 2,836.40 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.From: ฿ 1,306.72 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.From: ฿ 2,972.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shotFrom: ฿ 1,812.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° incrementsDays to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.From: ฿ 2,821.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,448.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.From: ฿ 3,143.89 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.From: ฿ 13,689.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 3,365.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
2-flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.From: ฿ 4,168.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.From: ฿ 4,127.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute Chamfering Cutter (negative type) HSCT-N
OSG
End mill for negative type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,587.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute Chamfering Cutter (positive type) HSCT-P
OSG
End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,587.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N
OSG
Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,848.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P
OSG
Positive type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.From: ฿ 3,848.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 1,567.00 Days to Ship:
91 Day(s)
91 Day(s)
-
You can add up to 6 items per a category to the compare list.
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank
OSG
Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.From: ฿ 943.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Solid Chamfering Endmill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.From: ฿ 1,804.96 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
SAGCCC AS Coated Carbide Center for Chamfering
SANKO MFG
[Features]
· Center chamfering cutter with TiAlN coating.
· Can be used in a wide range of applications by combining the design concepts of end mills and drills.
· Double angle is adopted to chamfering portion.
· Possible to make a clean finishing surface with less burrs.From: ฿ 3,527.74 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GCCC, Carbide Center for Chamfering
SANKO MFG
[Features]
· Can be used in a wide range of applications by combining the design concepts of end mills and drills.
· Double angle is adopted to chamfering portion.
· Possible to make a clean finishing surface with less burrs.From: ฿ 2,856.52 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 2,372.05 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 60° Carbide DLC Coating
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.From: ฿ 3,765.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide DLC Coating
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 3,300.74 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 3,765.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 60° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.From: ฿ 3,300.74 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUJIGEN
[Features]
· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.
· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.
· Achieves high runout accuracy within 5/1,000 mm.From: ฿ 4,016.40 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
EIKOSHA
Drill for positioning and chamfering.
[Features]
· TiN coating achieves longer life.From: ฿ 643.97 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Poulten&Graf
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.From: ฿ 1,328.22 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
DAIICHITOOL
[Features]
A center reamer with an overall length of 45 to 99 mm and a handle diameter of 6 to 12 mm.From: ฿ 847.66 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.From: ฿ 3,261.47 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.From: ฿ 4,378.92 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.From: ฿ 4,378.92 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.From: ฿ 3,916.17 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.From: ฿ 3,916.17 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.From: ฿ 4,685.06 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.From: ฿ 4,685.06 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.From: ฿ 3,566.75 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.From: ฿ 3,566.75 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.From: ฿ 4,145.68 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.From: ฿ 4,145.68 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Standard Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.From: ฿ 3,925.71 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.From: ฿ 3,925.71 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Long Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.From: ฿ 5,069.20 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Long Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.From: ฿ 5,069.20 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 798.71 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.From: ฿ 3,221.09 Days to Ship:
5 Day(s)
5 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | |
| Brand | OSG | FUKUDA | MISUMI | OSG | OSG | MISUMI | MISUMI | MAKOTOLOY | OSG | MISUMI | MISUMI | MISUMI | OSG | IWATA TOOL | MISUMI | MISUMI | MISUMI | MISUMI | OSG | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | DIXI | SANKO MFG | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | FUJIGEN | EIKOSHA | Poulten&Graf | DAIICHITOOL | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | PLUS_TOOL | THE CUT |
| Product Series | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfering end mill, 3-flute / short model | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | 2-flute Spiral Chamfering Cutter (For Copper and Aluminum Alloys) CA-SCC | 2-flute, Long Shank, Spiral Chamfering Cutter (for copper and aluminum alloys) CA-LS-SCC | 3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N | 3-flute, Long Shank, Chamfering Cutter (positive type) LS-HSCT-P | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 491.00 | ฿ 1,870.66 Special Price On Sale Until 30/06/2024 | ฿ 1,811.61 | ฿ 3,851.00 | ฿ 271.00 | ฿ 1,360.26 | ฿ 1,519.00 | ฿ 3,261.47 | ฿ 1,312.00 | ฿ 1,723.00 | ฿ 2,338.00 | ฿ 1,854.00 | ฿ 2,179.00 Special Price On Sale Until 30/06/2024 | ฿ 2,975.70 | ฿ 2,168.00 | ฿ 1,841.00 | ฿ 3,031.00 | ฿ 1,547.00 | ฿ 656.00 | ฿ 1,481.81 | ฿ 1,907.70 | ฿ 2,372.05 | ฿ 2,836.40 | ฿ 1,306.72 | ฿ 2,972.00 | ฿ 1,812.00 | ฿ 2,821.00 | ฿ 1,448.00 | ฿ 3,143.89 | ฿ 13,689.00 Special Price On Sale Until 30/06/2024 | ฿ 3,365.00 | ฿ 4,168.00 | ฿ 4,127.00 | ฿ 3,587.00 | ฿ 3,587.00 | ฿ 3,848.00 | ฿ 3,848.00 | ฿ 1,567.00 | ฿ 943.00 | ฿ 1,804.96 | ฿ 3,527.74 | ฿ 2,856.52 | ฿ 2,372.05 | ฿ 3,765.09 | ฿ 3,300.74 | ฿ 3,765.09 | ฿ 3,300.74 | ฿ 4,016.40 | ฿ 643.97 | ฿ 1,328.22 | ฿ 847.66 | ฿ 3,261.47 | ฿ 4,378.92 | ฿ 4,378.92 | ฿ 3,916.17 | ฿ 3,916.17 | ฿ 4,685.06 | ฿ 4,685.06 | ฿ 3,566.75 | ฿ 3,566.75 | ฿ 4,145.68 | ฿ 4,145.68 | ฿ 3,925.71 | ฿ 3,925.71 | ฿ 5,069.20 | ฿ 5,069.20 | ฿ 798.71 | ฿ 3,221.09 | |
| Days to Ship | Same day | 12 Day(s) | Same day | Same day | Same day | Same day | 3 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | Same day | 5 Day(s) | Same day | 3 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | Same day | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | Same day | 3 Day(s) | Same day | 5 Day(s) | 3 Day(s) | 3 Day(s) | 3 Day(s) | 5 Day(s) | Same day | 91 Day(s) | 91 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 91 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 7 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 31 Day(s) | 5 Day(s) |
| Specifications | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tool Material Type | High-speed steel | Cobalt HSS | Carbide | Carbide | High-speed steel | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Cobalt HSS | - | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide |
| Tool Diameter (D)(mm) | 3 ～ 25 | 4 ～ 40 | 3 ～ 16 | 0.8 ～ 1 | 2 ～ 25 | 10 ～ 25 | 3 ～ 12 | 1 ～ 20 | 0.5 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 0.5 ～ 25 | 0.1 ～ 1.5 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 25 | 6 ～ 32 | 1.2 ～ 16 | 3 ～ 12 | 0.6 ～ 4 | 0.5 ～ 20 | 3 ～ 12 | 3 ～ 12 | 10 ～ 25 | 3 ～ 10 | 3 ～ 16 | 3 ～ 12 | 16 ～ 25 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | - | 3 ～ 25 | 2 ～ 12 | 3 ～ 20 | 3 ～ 20 | 1.2 ～ 16 | 2 ～ 16 | 1.2 ～ 16 | 3 ～ 12 | 0.6 ～ 4 | 4 ～ 10 | 3 ～ 25 | 3 ～ 20 | 6 ～ 50 | 1 ～ 20 | 1 ～ 20 | 1 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 0.3 ～ 0.9 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 10 | 3 ～ 20 |
| Tip angle (θ) | 60 ～ 120 | 90 ～ 120 | 60 ～ 120 | 90 | 90 ～ 130 | 60 ～ 120 | 60 ～ 120 | 90 | 90° ～ 140° | 60 ～ 120 | 90 | 90 | 90 | 90 | 90 | 90 | - | 90 | 90 | - | 90 | 90 | 90 | 90 | 90 | 90 | 60 ～ 160 | 90 | 60 ～ 120 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | - | 90 | 90 | - | - | 60 | 60 | 90 | 90 | 60 | 90 | 90 ～ 135 | 90 | 60° ～ 90° | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 60° | 90 ～ 120 |
| Application | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[○] / Cast Iron[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | Aluminum[○] / Resin[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | NA | Available | NA | NA | NA | Available | Available | - | NA | Available | Available | NA | NA | NA | Available | NA | Available | NA | NA | Available | NA | NA | NA | - | NA | NA | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | - | Available | Available | NA | NA | NA | NA | NA | NA | - | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NA | - |
| Coating Y/N | Available | NA | Available | Available | NA | Available | Available | NA | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | Available | Available | Available | NA | Available / NA | Available | Available | Available | Available | NA | Available | NA | NA | NA | NA | NA | Available | Available | Available | Available | NA | NA | Available | Available | Available | Available | NA | Available | Available | - | NA | Available | Available | NA | NA | Available | Available | NA | NA | Available | Available | Available | Available | Available | Available | - | Available |
| Coating Type | TiN | Non-Coated | TS | TiAlN | Non-Coated | - | AlCrN | - | Other | TS | TS | - | TiAlN | ALT | TS | TS | AlCrN | TS | TiCN | Non-Coated | - | - | Other | Other | TS | - | TiCN | AlCrN | AlCrN | AlCrN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | TiAlN | TiAlN | Non-Coated | - | DLC | DLC | DLC | Other | Non-Coated | TiN | Other | - | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | TiN | TiN | TiN | TiN | - | TiAlN |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Chamfer, V-Grooves
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?