(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 30/6/2024 to 5:00 1/7/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Centering/Countersink（Tool Material Type：Carbide）
[What is a center drill?]
A drill used to process the center hole. The groove length of the drill is short and it has rigidity. The center drill is used to drill the center hole as the blade shape is structured so as not to be displaced. It may also be used only for positioning.
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.63
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1～2.12
- 1 to 2.5
- 1/4
- 1/8
- 1/16
- 1/32
- 1/64
- 1.1
- 1.2
- 1.25
- 1.25～2.65
- 1.3
- 1.4
- 1.5
- 1.5 to 4
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2～4.25
- 2~5
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.5 to 6.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3–6
- 3/8
- 3×8
- 3–8
- 3/16
- 3/32
- 3/64
- 3.1
- 3.15
- 3.15～6.7
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4～8.5
- 4×10
- 4–10
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5～10.6
- 5×12
- 5–12
- 5/16
- 5/32
- 5/64
- 5.3
- 5.6
- 5.8
- 6
- 6~15
- 6×18
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.3～13.2
- 6.35
- 6.5
- 7
- 7.3
- 7.7
- 8
- 8 to 17
- 8.3
- 9
- 9.4
- 9.5
- 9.52
- 10
- 10～21.2
- 10.4
- 11
- 11.2
- 11.5
- 12
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.87
- 16
- 16.5
- 16.5,20.5,25.0,37.0
- 18
- 18.5
- 19
- 19.05
- 20
- 20.0(+0.3)
- 20.5
- 21
- 22
- 22.5
- 23
- 25
- 25.0(+0.3)
- 25.4
- 26
- 27
- 28
- 30
- 30.0(+0.3)
- 31
- 31.5
- 32
- 34
- 35
- 36
- 37
- 40
- 45
- 46
- 50
- 55
- 60
- 63
- 65
- 70
- 75
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 66 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
MISUMI
Carbide spot drill that contributes to higher efficiency in chamferingFrom: ฿ 1,045.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drills-Type A 60°_C-CD-S
YAMAWA MFG
■ Low helix carbide center drills - Type A suitablefor hard materials and mass production.From: ฿ 2,774.68 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drillingFrom: ฿ 1,610.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MISUMI
The non-coated design allows the edge of the tip to stand, achieving the high cut-off performance.From: ฿ 3,110.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 864.42 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 538.78 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Long Shank Low Helix Carbide Center Drills-Type A 90°_C-CD-QL
YAMAWA MFG
■ The C-CD-QL is a carbide long shank low helixcenter hole drill suitable for hard materialsand mass production of center with 90° centerholes.From: ฿ 5,389.69 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.From: ฿ 12,300.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.From: ฿ 1,605.95 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 90°, ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 1,135.80 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Low Helix Carbide Center Drills-Type A 60°_C-CD-SL
YAMAWA MFG
■ Long shank low helix carbide center drills - TypeA suitable for hard materials and mass production.From: ฿ 5,389.69 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V groovingFrom: ฿ 1,289.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack
MISUMI
A carbide countersink that's essential in chamfering and deburringFrom: ฿ 2,396.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Centering Tool, Short Type
EIKOSHA
Center Positioning, Plate/Internal Chamfering, External ChamferingFrom: ฿ 6,154.02 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide HG Center Drill Bit, A Type 90°
IWATA TOOL
[Features]
· A high-grade center drill for mass production machining.
· Provides a thorough improvement of takt time and a stable lifespan.
· A high-grade center drill improved for mass production machining.
· A lifespan especially as a small-diameter size is several times longer than conventional center drills.From: ฿ 1,980.07 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Bit, A Type 60°
IWATA TOOL
[Features]
· The center drill is also in the age of carbiding.
· The breakage problem has been drastically reduced by improving the toughness of the carbide material for various types of processing and optimizing the shape.
· Higher speed and longer lifespan are possible.From: ฿ 1,642.36 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 120° Steel (TiAℓN coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,787.65 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 1, Carbide 60°
OKABE
Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.From: ฿ 4,271.65 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Low Helix Carbide Center Drills-Type A 90°_C-CD-Q
YAMAWA MFG
■ Low helix center drills - Type A center drill formachining 90°center hole. Suitable for hardmaterials and mass production.From: ฿ 4,048.46 Special Price Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Point Drills 90°, Coated_C-PE-Q-V
YAMAWA MFG
■ C-PE-Q V is the carbide point drill enablingpositioning (125° edge angle) and chamfering(90°) simultaneously. High cutting accuracy isavailable owing to a good cutting-start due to 2step flat design. Optimum coating suitable for thecutting condition.From: ฿ 2,918.48 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.From: ฿ 12,300.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Crystal Center Drill ZH330-TiN
RYOCO SEIKI
[Features]
· TiN coating is a highly reliable and versatile coating.
· The surface hardness is HV2,000 to 2,200, the heat-resistance temperature is around 500°C and the friction coefficient is 0.4From: ฿ 3,268.92 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Point Set Drill, Carbide C-NC-PSD
THE CUT
[Features]
· Allows for machining at higher speeds and a significantly longer tool life than with a high speed steel (TiAlN) point set drill.From: ฿ 1,374.55 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill that's ideal for centering in mass production drillingFrom: ฿ 2,516.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.From: ฿ 1,605.95 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Centering Tool, Long Type
EIKOSHA
Center Positioning, Plate/Internal Chamfering, External Chamfering, LongFrom: ฿ 9,762.01 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Centering Tool, Short Type (Taper Shank)
EIKOSHA
Center Positioning, Plate/Internal Chamfering, External Chamfering, Morse Taper ShankFrom: ฿ 6,538.48 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Centering Tool, Long Type (Taper Shank)
EIKOSHA
Center Positioning, Plate/Internal Chamfering, External Chamfering, Long, Morse Taper ShankFrom: ฿ 9,256.81 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide HG Center Drill Bit A Type 60゜
IWATA TOOL
[Features]
· A high-grade center drill for mass production machining.
· Provides a thorough improvement of takt time and a stable lifespan.
· A high-grade center drill improved for mass production machining.
· A lifespan especially as a small-diameter size is several times longer than conventional center drills.From: ฿ 1,005.54 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide HG Center Drill Bit A-shaped 60゜, ALD Coating
IWATA TOOL
[Features]
· A high-grade center drill for mass production machining.
· Provides a thorough improvement of takt time and a stable lifespan.
· A high-grade center drill improved for mass production machining.
· A lifespan especially as a small-diameter size is several times longer than conventional center drills.From: ฿ 1,439.74 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 120°, ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 837.29 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 120°, Long Type, ALD Coating
IWATA TOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.From: ฿ 1,859.46 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 864.42 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center 60° ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 1,135.80 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center 90°, Long Type ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 2,085.60 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 60°, Long Type, ALD Coating
IWATA TOOL
Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering.
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.From: ฿ 2,085.60 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating
IWATA TOOL
[Features]
· The center drill is also in the age of carbiding.
· The breakage problem has been drastically reduced by improving the toughness of the carbide material for various types of processing and optimizing the shape.
· Higher speed and longer lifespan are possible.From: ฿ 1,787.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Bit, A Type High Helix 90°, ALD Coating
IWATA TOOL
[Features]
· The center drill is also in the age of carbiding.
· The breakage problem has been drastically reduced by improving the toughness of the carbide material for various types of processing and optimizing the shape.
· Higher speed and longer lifespan are possible.From: ฿ 2,462.51 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Bit, B-Type, ALD Coating
IWATA TOOL
[Features]
· The center drill is also in the age of carbiding.
· The breakage problem has been drastically reduced by improving the toughness of the carbide material for various types of processing and optimizing the shape.
· Higher speed and longer lifespan are possible.From: ฿ 3,137.91 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3.175 mm Shank for Pointing Drill Tip 120° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,494.37 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Pointing Drill, 120° Tip, 3.175 mm Shank for Steel (TiAlN Coating)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,787.65 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 120° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,494.37 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3.175 mm Shank for Pointing Drill Tip 120° Non-Ferrous/Resin
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,494.37 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 120° Non-Ferrous/Resin
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,494.37 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 90° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,494.37 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 90° Steel (TiAℓN coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,787.65 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 90° Non-Ferrous/Resin
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,650.39 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 1, Carbide 90°
OKABE
Because it uses carbide materials, it has both high hardness and elasticity. It is a center drill manufactured with one of the best heat treatment, and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.From: ฿ 4,035.25 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 1, Carbide VA Coating 60°
OKABE
A center drill manufactured with tempering using the best heat treatmentFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 1, Carbide VA Coating 90°
OKABE
A center drill manufactured with tempering using the best heat treatmentFrom: ฿ 4,912.00 Days to Ship:
61 Day(s)
61 Day(s)
-
You can add up to 6 items per a category to the compare list.
Solid center drill CDL / S-CDL type
DIJET
[Features]
Drill with excellent abrasion resistance.
[Applications]
Suitable for drilling general steel, cast iron and aluminum.From: ฿ 5,625.10 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· Allows simultaneous centering and chamfering.From: ฿ 2,486.32 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.From: ฿ 2,878.77 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 3,955.75 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.From: ฿ 2,878.77 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· A deburring fork for chamfering and deburring of hole entrances and exits.
· Internal oil supply type.From: ฿ 28,619.15 Days to Ship:
25 Day(s)
25 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· A deburring fork for chamfering and deburring of hole entrances and exits.
· Internal oil supply typeFrom: ฿ 33,283.83 Days to Ship:
25 Day(s)
25 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
Capable of chamfering and deburring of hole entrances and exits by milling.From: ฿ 3,790.66 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Joint- Low Helix Carbide Center Drills-Type A 60°_JO-C-CDS
YAMAWA MFG
■ The JO-C-CDS is a carbidetype A center hole drill joint toolsuitable for hard materials andmass production processing.From: ฿ 3,971.06 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Point Drills 60°, Coated_C-PE-S-V
YAMAWA MFG
■ C-PE-S V is the carbide point drill enablingpositioning (125° edge angle) and chamfering(60°) simultaneously. High cutting accuracy isavailable owing to a good cutting-start due to 2step flat design. Optimum coating suitable forthe cutting condition.From: ฿ 4,231.70 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Joint- Carbide Point Drills 90°, Coated_JO-C-PEQ-V
YAMAWA MFG
■ The JO-C-PEQ V is a coated carbide point drilljoint tool that can perform simultaneous combinedmachining of positioning and chamfering.From: ฿ 5,648.50 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill TiAℓ N KCDA-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.From: ฿ 2,457.51 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill TiAℓ N KCDA-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.From: ฿ 2,457.51 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Noncoat KCD-60
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.From: ฿ 1,994.92 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Center Drill Noncoat KCD-90
KYOWA SEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.From: ฿ 1,994.92 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Solid Countersink 3-Flute C-3MC (NF15)
TAIYO-TOOL
[Applications]
· Hole chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· Carbide
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 3-FluteFrom: ฿ 7,790.73 Days to Ship:
6 Day(s)
6 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | MISUMI | YAMAWA MFG | MISUMI | MISUMI | IWATA TOOL | IWATA TOOL | YAMAWA MFG | OSG | DIXI | IWATA TOOL | YAMAWA MFG | MISUMI | MISUMI | EIKOSHA | IWATA TOOL | IWATA TOOL | ATOM | OKABE | YAMAWA MFG | YAMAWA MFG | OSG | RYOCO SEIKI | THE CUT | MISUMI | DIXI | EIKOSHA | EIKOSHA | EIKOSHA | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | ATOM | ATOM | ATOM | ATOM | ATOM | ATOM | ATOM | ATOM | OKABE | OKABE | OKABE | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | KYOWA SEIKO | TAIYO-TOOL |
| Product Series | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | Long Shank Low Helix Carbide Center Drills-Type A 90°_C-CD-QL | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | Long Shank Low Helix Carbide Center Drills-Type A 60°_C-CD-SL | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | Carbide Center Drill Bit, A Type High Helix 60°, ALD Coating | Carbide Center Drill Bit, A Type High Helix 90°, ALD Coating | Pointing Drill, 120° Tip, 3.175 mm Shank for Steel (TiAlN Coating) | 3.175 mm Shank for Pointing Drill Tip 120° Non-Ferrous/Resin | Center Drill, Okabe Standard, Type 1, Carbide VA Coating 60° | Center Drill, Okabe Standard, Type 1, Carbide VA Coating 90° | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 1,045.00 | ฿ 2,774.68 | ฿ 1,610.00 | ฿ 3,110.00 | ฿ 864.42 | ฿ 538.78 | ฿ 5,389.69 | ฿ 12,300.00 | ฿ 1,605.95 | ฿ 1,135.80 | ฿ 5,389.69 | ฿ 1,289.00 | ฿ 2,396.00 | ฿ 6,154.02 | ฿ 1,980.07 | ฿ 1,642.36 | ฿ 1,787.65 | ฿ 4,271.65 | ฿ 4,048.46 Special Price On Sale Until 30/06/2024 | ฿ 2,918.48 | ฿ 12,300.00 | ฿ 3,268.92 | ฿ 1,374.55 | ฿ 2,516.00 | ฿ 1,605.95 | ฿ 9,762.01 | ฿ 6,538.48 | ฿ 9,256.81 | ฿ 1,005.54 | ฿ 1,439.74 | ฿ 837.29 | ฿ 1,859.46 | ฿ 864.42 | ฿ 1,135.80 | ฿ 2,085.60 | ฿ 2,085.60 | ฿ 1,787.09 | ฿ 2,462.51 | ฿ 3,137.91 | ฿ 1,494.37 | ฿ 1,787.65 | ฿ 1,494.37 | ฿ 1,494.37 | ฿ 1,494.37 | ฿ 1,494.37 | ฿ 1,787.65 | ฿ 1,650.39 | ฿ 4,035.25 | ฿ 999,999,999.00 | ฿ 4,912.00 | ฿ 5,625.10 | ฿ 2,486.32 | ฿ 2,878.77 | ฿ 3,955.75 | ฿ 2,878.77 | ฿ 28,619.15 | ฿ 33,283.83 | ฿ 3,790.66 | ฿ 3,971.06 | ฿ 4,231.70 | ฿ 5,648.50 | ฿ 2,457.51 | ฿ 2,457.51 | ฿ 1,994.92 | ฿ 1,994.92 | ฿ 7,790.73 |
| Days to Ship | Same day | Same day | Same day | 3 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | Same day | 3 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 20 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 6 Day(s) | 3 Day(s) | 7 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 31 Day(s) | 5 Day(s) | 31 Day(s) | 5 Day(s) | 31 Day(s) | 7 Day(s) | Quote | 61 Day(s) | 5 Day(s) | 5 Day(s) | 6 Day(s) | 31 Day(s) | 5 Day(s) | 25 Day(s) | 25 Day(s) | 6 Day(s) | 20 Day(s) | 10 Day(s) | 20 Day(s) | 5 Day(s) | Same day | 6 Day(s) | 5 Day(s) | 6 Day(s) |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 2 ～ 12 | 4 ～ 18 | 0.5 ～ 5 | 0.3 ～ 2 | 0.03 ～ 6 | 0.4 ～ 16 | 4 ～ 12 | 1 ～ 3.8 | 3 ～ 20 | 0.1 ～ 6 | 4 ～ 12 | 0.5 ～ 2 | 6.3 ～ 20.5 | 12 ～ 50 | 0.2 ～ 3 | 1 ～ 8 | 0.02 ～ 3 | 0.3 ～ 6 | 4 ～ 18 | 3 ～ 16 | 1 ～ 3.8 | 0.8 | 3 ～ 10 | 1 ～ 4 | 3 ～ 20 | 12 ～ 50 | 12 ～ 40 | 12 ～ 40 | 0.2 ～ 3 | 0.2 ～ 1 | 0.4 ～ 16 | 2 ～ 12 | 0.03 ～ 6 | 0.1 ～ 6 | 0.5 ～ 4 | 0.5 ～ 4 | 1 ～ 6 | 1 ～ 8 | 1 ～ 6.3 | 0.02 ～ 3 | 0.02 ～ 3 | 0.02 ～ 2.5 | 0.02 ～ 3 | 0.02 ～ 3 | 0.02 ～ 3 | 0.02 ～ 3 | 0.02 ～ 0.95 | 0.3 ～ 6 | 0.3 ～ 6 | 0.3 ～ 6 | 2 ～ 5 | 5 ～ 20 | 5 ～ 20 | 6.35 | 5 ～ 20 | - | - | 3 ～ 12 | 10 ～ 16 | 6 ～ 10 | 10 ～ 16 | 0.3 ～ 3 | 0.3 ～ 3 | 0.3 ～ 3 | 0.3 ～ 3 | 6.3 ～ 25 |
| Tip angle (θ) | 90 ～ 120 | 60° | - | - | 90 | 120 | 90° | 60 | 90 | 90 | 60° | 60 ～ 120 | - | 90 ～ 118 | 90 | 60 | 120 | 60 | 90° | 125° | 90 | 60 × 120 | 90 | - | 90 ～ 120 | 90 ～ 118 | 90 ～ 118 | 90 ～ 118 | 60 | 60 | 120 | 120 | 60 | 60 | 90 | 60 | 60 | 90 | 60 | 120 | 120 | 120 | 120 | 120 | 90 | 90 | 90 | 90 | 60 | 90 | 60 ～ 90 | 120 | 120 | 90 | 90 | - | - | 90 | 60° | 125° | 90 | 120° | 120° | 120° | 120° | 60 ～ 120 |
| Application | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Drilling | Centering (Positioning) | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) | Hole Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) / Drilling | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Hole Chamfer |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | - | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | Aluminum[◎] / Resin[◎] | Aluminum[◎] / Resin[◎] | general steel[○] / Quenched and tempered steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] | Aluminum[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[○] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | - | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | - |
| Single blade, two blades | Single blade | Double-edged | Double-edged | Single blade | Single blade / Double-edged | Single blade / Double-edged | Double-edged | Single blade | - | Single blade / Double-edged | Double-edged | Single blade | Single blade | - | Single blade | Double-edged | Single blade | Single blade / Double-edged | Double-edged | Double-edged | Single blade | Double-edged | Single blade | Double-edged | - | - | - | - | Single blade | Single blade | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Single blade / Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Double-edged | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Single blade |
| Peripheral Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | NA | Available | NA | - | NA | NA | Available | NA | NA | NA | NA | NA | - | NA | - | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | - | - | - | - | - | - | - | - | NA | NA | NA | - | - | - | - | - |
| Coating Y/N | Available | NA | Available | NA | NA | NA | NA | Available | NA | Available | NA | Available | Available | - | NA | NA | Available | NA | NA | Available | Available | Available | NA | Available | NA | - | - | - | NA | Available | Available | Available | NA | Available | Available | Available | Available | Available | Available | NA | Available | NA | NA | NA | NA | Available | NA | NA | Available | Available | NA | NA | Available | NA | Available | NA | NA | Available | NA | Available | Available | Available | Available | NA | NA | NA |
| Coating Type | TiAlN | - | TiAlN | - | - | - | - | TiAlN | - | Other | - | TiAlN | TiAlN | - | - | - | TiAlN | Non-Coated | - | TiAlN | TiAlN | TiN | - | TiAlN | - | - | - | - | - | Other | Other | Other | - | Other | Other | Other | Other | Other | Other | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | Non-Coated | - | Other | - | Other | - | - | TiAlN | - | TiAlN | TiAlN | TiAlN | TiAlN | - | - | Non-Coated |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Related Categories to Centering/Countersink
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?