(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
Chamfering / Centering Tools（Coating Y/N：Available）
Search by specifying the lower class category
-
Centering/Countersink
-
Chamfer, V-Grooves
-
Inner R
-
Replaceable Blade Type Chamfering Tools/Tips/Blades
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.25～1.1
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.63
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1～2.12
- 1 to 2.5
- 1/4
- 1–6
- 1/8
- 1/16
- 1–16
- 1/32
- 1/64
- 1.1
- 1.2
- 1.25
- 1.25～2.65
- 1.3
- 1.4
- 1.5
- 1.5 to 4
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2～4.25
- 2~5
- 2 to 9
- 2–10
- 2～13
- 2–14
- 2～32
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.5 to 6.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3–6
- 3/8
- 3×8
- 3–8
- 3~14
- 3 to 15
- 3/16
- 3/32
- 3/64
- 3.1
- 3.15
- 3.15～6.7
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4～8.5
- 4×10
- 4–10
- 4～25
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5～10.6
- 5×12
- 5–12
- 5/16
- 5/32
- 5/64
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6~15
- 6×18
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.3～13.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8 to 17
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10～21.2
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.0(+0.3)
- 20.5
- 21
- 21.5
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- 30.0(+0.3)
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 76
- 80
- 90
- 95
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.15
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.3
- 6.5
- 6.75
- 7
- R7
- 7.2
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.25
- 8.5
- 8.75
- 9
- R9
- 9.5
- 9.6
- 10
- R10
- 10.5
- 11
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.4
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.2
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31.5
- XRM
- XRY
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 251 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
From: ฿ 23.88 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.From: ฿ 1,774.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TiN Coated / Non-Coated High-Speed Steel NC Spot Drill
MISUMI
Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and CenteringFrom: ฿ 257.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】
TRUSCO
[Features]
· Extended life with excellent thermal and abrasion resistance thanks to the titanium coating.
· Finest surface finish without any chatter marks.
[Applications]
· Work materials: Aluminum, stainless steel, iron, resin, copper.From: ฿ 915.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.From: ฿ 1,547.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025OSG
TiN coating enables higher speed and longer service life compared to NC-LDSFrom: ฿ 491.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set
MISUMI
Frequently used standard sizes are offered in a set at an affordable priceFrom: ฿ 3,592.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Nine9
The special insert design realizes an ultra-long operating life.From: ฿ 23.88 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.From: ฿ 1,811.61 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
WALTER TITEX
[Features]
· HSS-TiN.
· Form C.
· Right torsion.
· 90° chamfer angle.
· Set product available.From: ฿ 1,698.00 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Countersink / 3-Flute / 90°
MISUMI
Necessities in hole chamfering and deburring are available at low pricesFrom: ฿ 692.90 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.From: ฿ 1,306.72 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
OSG
[Features]
・ This drill increases processing speed for both centering and countersinking. Constructed with extreme toughness, high wear and heat resistance characteristics to ensure stable and consistent tool life.
・AD-LDS 60°、90°、120°、130°、140°（φ0.5～φ12）From: ฿ 1,312.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drillingFrom: ฿ 1,610.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,448.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
·Easy high-quality processing of corner radius
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating propertiesFrom: ฿ 1,254.19 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
MISUMI
Carbide spot drill that contributes to higher efficiency in chamferingFrom: ฿ 1,045.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200
NS TOOL
Supports NCs and MCs. R chamfering can be easily machined. Infinity coating used for significantly greater durabilityFrom: ฿ 2,382.56 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
BIG DAISHOWA SEIKI
[Features]
·Accurate positioning of drilled holes and chamfering are performed at once.
·High-precision indexable bit with excellent sharpness.
·The cutting edge can be replaced, eliminating the need for regrinding.
·It is a long shank type with little work interference.From: ฿ 4,477.04 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN-Coated High-Speed Steel Countersink, with Holes / 90°
MISUMI
Frequently used standard sizes are offered at affordable pricesFrom: ฿ 437.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024Leading Drill, Carbide FX Coating FX-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.From: ฿ 2,179.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Counter Sink (Titanium Coating)【1-6 Pieces Per Package】
TRUSCO
[Features]
· It uses cobalt high-strength steel for its base metal and has excellent wear and heat resistance.
· Its surface has high hardness due to the surface titanium coating and has improved heat and wear resistance as well as sharpness compared to cobalt high-strength steel.
· It easily expels chips because it uses 3 flute edges, providing a beautiful finish.
[Applications]
· Work materials: Iron, casting, stainless steel.
· Chamfering.
· Deburring.
· For countersinking.From: ฿ 921.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.From: ฿ 1,519.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025OSG
V coating enables longer service life compared to TIN-NC-LDSFrom: ฿ 656.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025V-UCS Hole Chamfering, Countersink, V Coating
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.From: ฿ 1,284.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 1, G Coating 60°
OKABE
Because it is made of high-speed steel, it has high hardness. It is a center drill manufactured with one of the best heat treatment, making it suitable for machining general steel, stainless steel, cast iron and aluminum.From: ฿ 772.91 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Throw-away Tip for C-Cutter Boy
BIG DAISHOWA SEIKI
[Features]
· An economical type with long life that allows 3 corners of the carbide tip to be usedFrom: ฿ 671.53 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
Tapered Shank Countersink, 3-Flute 90° 328
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.From: ฿ 5,228.65 Days to Ship:
23 Day(s)
23 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS
YAMAWA MFG
■In order to improve positioning accuracy of projection and shank tolerance, MHCDS has the cutting edge only on one end.
■ Considering clearance between center point and bottom of center hole, cutting edge length (ℓ) is made as short as possible to increase toughness.
■To increase centrality, drill point has 3 rakes and X thinning design, which enables high speed cutting and feeding.
■Increased centrality leads to great improvement of surface finish and circularity of center-drilled hole.From: ฿ 638.17 Days to Ship:
1 Day(s)
1 Day(s)
-
You can add up to 6 items per a category to the compare list.
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.From: ฿ 12,300.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
MISUMI
TiAlN coated type of the popular spot drillFrom: ฿ 732.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TiN-Coated High-Speed Steel Center Drill, Regular Model
MISUMI
Frequently used standard sizes are offered at affordable pricesFrom: ฿ 387.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Shank, Countersink, HSS, TiN Coating 90°
ILIX
Ideal for chamfering, countersinking, and deburring. Can be used for both machine work and manual work.From: ฿ 1,279.13 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
S-CRC S Coated Corner Rounding Cutter
SANKO MFG
[Features]
· S coating applied.
· Cutter dedicated for rounded surface chamfering machining.From: ฿ 2,629.14 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS Center Drill, A Type, 60°, TiCN Coating
IWATA TOOL
[Features]
· A center drill with high sharpness and outstanding durability.
· Iwata Tool's center drills never stop evolving.
· In addition to improving runout accuracy, the use of cobalt HSS and an optimized tool shape deliver excellent sharpness and help prevent breakages.From: ฿ 554.46 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Throw-away Tip for C-Cutter Mini
BIG DAISHOWA SEIKI
Throw-away insert for "C-Cutter Mini" high performance chamfering cutters that achieve ultra-high feed rates and a compact size.From: ฿ 400.02 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025High speed coating for Center Boy throwaway bit【5 Pieces Per Package】
BIG DAISHOWA SEIKI
[Features]
· Shows outstanding sharpness as it has a cutting edge with precision finishing.
· Because it is a disposable item with replaceable edge, it does not require regrinding and always performs smoothly.From: ฿ 4,849.51 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.From: ฿ 1,723.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating propertiesFrom: ฿ 2,338.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° incrementsDays to Ship:
11 Day(s)
11 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN coated type of the popular center drillFrom: ฿ 472.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model
MISUMI
Ideal for the hole chamfering of countersunk bolts with 90° chamfer.From: ฿ 902.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.From: ฿ 1,263.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
2-flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.From: ฿ 3,851.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank
OSG
Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.From: ฿ 943.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Solid Chamfering Endmill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.From: ฿ 1,804.96 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter
SANKO MFG
[Features]
· Round-chamfering cutter that is possible to process a wide range of difficult-to-cut materials from raw materials to high-hardness materials.
· The long shank enables deep pocket machining.
· FA GCCRC Long shank end mill.From: ฿ 5,973.15 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Carbide SP Center, 90°, ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 1,135.80 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center 90°, Long Type ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 2,085.60 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025FUJIGEN
An indexable insert for Chibimomi that can be used for center spotting and chamfering.
[Applications]It is used for center hole spotting, countersunk chamfering, and edge chamfering.From: ฿ 829.90 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.From: ฿ 938.44 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
3 mm Shank for Pointing Drill Tip 90° Steel (TiAℓN coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm incrementsFrom: ฿ 1,787.65 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Long Center Drill, G Coating 90°
OKABE
A center drill manufactured with tempering using the best heat treatmentFrom: ฿ 2,601.81 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 30/09/2024
Until 30/09/2024CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.From: ฿ 4,935.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Straight Shank, Countersink 3-Flute 90° 1326
GUHRING
[Features]
· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
· Using A coating achieves a longer life.From: ฿ 1,155.70 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Point Drills 90°, Coated_PE-Q-V
YAMAWA MFG
■ PE-Q V is the coated point drill enablingpositioning (125° edge angle) and chamfering (90°)simultaneously. High cutting accuracy is availableowing to a good cutting-start due to 2 step flatdesign. Optimum coating suitable for the cuttingcondition.From: ฿ 974.06 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
V Spot Carbide Drill, Long Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.From: ฿ 5,069.20 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of WorkpiecesFrom: ฿ 2,168.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining styleFrom: ฿ 1,360.26 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Center Drill, Long Model
MISUMI
The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.From: ฿ 774.00 Days to Ship:
3 Day(s)
3 Day(s)
-
You can add up to 6 items per a category to the compare list.
Counter Sink Set TiN Coating 4 Pairs【4 Pieces Per Package】
ILIX
Ideal for chamfering, countersinking, and deburring. Frequently used sizes are selected and stored in a metal case. A handle is attached to enable manual operation.From: ฿ 16,372.18 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
FAGCCRC, FA Coated Carbide Corner Rounding Cutter
SANKO MFG
[Features]
· It is possible to process a wide range of difficult-to-cut materials from raw materials to high-hardness materials.
· Processing efficiency improving, long lifespan, and high precision finished surface processing are possible by carbide FA coating.From: ฿ 3,211.08 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
HSS, SP Center, 90° TiCN Coating
IWATA TOOL
[Features]
· Accuracy, processing speed and costs are compatible.
· A new shape high speed centering tool.
· Long lifespan and no chip-off of the blade tip.
· Tip chipping prevention due to the double angle points.
· No breakage of the tip compared to conventional center drill bits.
· Excellent sharpness with a high helix design.
· Surface roughness is improved.From: ฿ 414.89 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating
IWATA TOOL
[Features]
· Ensures a high-accuracy round shape as a rake blade.
· Features a wide rake angle for the first time as a round chamfering tool, improving dramatically the cutting quality and the surface roughness.
· Significantly reduces the cutting heat, improving deflection accuracy.From: ฿ 3,958.06 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATA TOOL
[Features]
· There is little burr and chattering, and the surface roughness is beautiful.
· Multiple diameters can be chamfered with 1 piece.
· The finish is the same quality, the highest surface roughness.From: ฿ 3,765.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Toglon Hard SP 90° ALD Coating
IWATA TOOL
[Features]
· Possible to machine HRC 40 to 72 hardened steel.
· Demonstrates incomparable performance against hardened steel, die steel, Kovar, and Hastelloy, etc.
· Maximum surface roughness can be achieved due to high helix shape.
· Amazing long lifespan due to 3-flute and long cutting edges.From: ฿ 2,836.40 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide SP Center, 120°, ALD Coating
IWATA TOOL
[Features]
· High-precision, long lifespan and reliability.
· Carbiding of the centering tool is possible because the SP center has a distinctive tip shape.
· In the drill positioning and chamfering, applicable with a wide range of workpieces, from steel and stainless steel to tempered materials and aluminum.
· There is no folding trouble and productivity is improved.From: ฿ 837.29 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUJIGEN
A dedicated carbide insert for Gentlemen that can perform chamfering.
[Applications]Used for chamfering.From: ฿ 1,007.79 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
FUJIGEN
An indexable insert that can perform counterbore.
[Applications]It is used for counterboring.From: ฿ 467.46 Days to Ship:
8 Day(s)
8 Day(s)
-
You can add up to 6 items per a category to the compare list.
S32MOZ Chip S32MOZ【1-12 Pieces Per Package】
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.From: ฿ 569.00 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Type 2, G Coating 60°x120°
OKABE
A center drill manufactured with tempering using the best heat treatmentFrom: ฿ 999,999,999.00 Days to Ship:
Quote
Quote
-
You can add up to 6 items per a category to the compare list.
Center Drill, Okabe Standard, Long Center Drill, G Coating 60°
OKABE
[Features]
·A center drill manufactured by tempering with one of the best heat treatment
·Tip angle: 60°
·Drill diameter: 3 mm
・ Overall length: 100 mm
·Work material: General steel / stainless steel / cast iron / aluminum / copper
·Tool Material: High-speed steel
·Coating / surface treatment: For steel
·Single-edged / doubled-edged: doubled-edged
·Peripheral cutting edge Yes/No: no
·Groove length: 3.7 mm
·Body diameter: 8 mmFrom: ฿ 2,067.51 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
BIG DAISHOWA SEIKI
[Applications]It can be used for cutters for curved surface chamfering. [Features]Carbide coating is applied and 4 corners can be used.From: ฿ 1,550.00 Days to Ship:
9 Day(s)
9 Day(s)
-
You can add up to 6 items per a category to the compare list.
Milling Cutter for 120° Chamfering Type N 6714
GUHRING
Taper half-angle 60° chamfering milling cutter.From: ฿ 1,483.12 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Milling Cutter for 90° Chamfering Type N 6713
GUHRING
Taper half-angle 45° chamfering milling cutter.From: ฿ 1,367.95 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.From: ฿ 2,878.77 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025Long Shank Point Drills 60°, Coated_PE-SL-V
YAMAWA MFG
■ PE-SL V is the point drill enabling positioning(125°edge angle) and chamfering (60°) simultaneously.High cutting accuracy is available owing to a goodcutting-start due to 2 step flat design. Optimumcoating suitable for the cutting condition.From: ฿ 1,884.41 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 31/03/2025
Until 31/03/2025High Helix Center Drills-Type A 60°, Coated_CE-S-V
YAMAWA MFG
■ The CE-S V is a coated type A high helixcenter hole drill with excellent wear resistanceand welding resistance.From: ฿ 627.73 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V
YAMAWA MFG
■ Long shank low helix center drills - Type Asuitable for relatively hard materials and coatedto improve wear resistance and anti-welding.From: ฿ 2,618.34 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Electrodeposition Diamond Router ED-EM
OSG
Standard in-stock item, sold by designated agencies
[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.From: ฿ 1,456.00 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank
SANDVIK
High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized toolingFrom: ฿ 4,276.18 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated)
RUKO
[Features]
· Hexagonal shaft (6.35 mm) shank allows easy setting for work.
· Minimizes chattering and burrs.
[Applications]
· Work materials: Iron, cast iron, non-ferrous metals, light metals.From: ฿ 1,514.46 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Chamfering Cutter NC Spot Drill (Chip)
Nine9
[Features]
·Insert for NC spot drill holder.
·Momitsuke and chamfering are integrated into one process.
·The tip angle of 145° prevents drill shoulder chipping.
[Applications]
·For CNC lathes, CNC compound lathes, and machining centers for drilling pilot holes for tapping
·Applying kneading only at 145°
·Chamfering, V-grooving.From: ฿ 2,147.31 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.From: ฿ 3,540.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
X Coating Miniature Inner R Cutter NCR-2X
NS TOOL
[Features]
· Cutter for hardness of 55HRC or less.
tool material: super micro-grain carbide alloy
Surface treatment: X coating
Number of edges: 2 flutes
Machining applications: Curved surface chamferingFrom: ฿ 2,834.55 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.From: ฿ 4,378.92 Days to Ship:
7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
Mini Corner Rounding Cutter, Carbide C-CRC-V
THE CUT
[Features]
· Ideal for CNC machining.
· Capable of machining extremely thin workpieces.
· Simple regrinding/repolishing.From: ฿ 2,643.37 Days to Ship:
6 Day(s)
6 Day(s)
-
You can add up to 6 items per a category to the compare list.
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.From: ฿ 3,221.09 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coated Type A 60° High Helix Single End Center Hole Drill_AUCES
YAMAWA MFG
■To improve the tools precision and accuracy, YAMAWA adopted a single end design.
■Higher quality center holes can be achieved with the AUCES and AUSDS coated, single end design center hole drill.
■Because of the single end design, the tool length in the holder is constant and the tool projection is constant.From: ฿ 425.06 Days to Ship:
10 Day(s)
10 Day(s)
-
You can add up to 6 items per a category to the compare list.
Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS
YAMAWA MFG
■To improve the tools precision and accuracy, YAMAWA adopted a single end design.
■Higher quality center holes can be achieved with the AUCES and AUSDS coated, single end design center hole drill.
■Because of the single end design, the tool length in the holder is constant and the tool projection is constant.From: ฿ 425.06 Days to Ship:
10 Day(s)
10 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.      | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/09/2024 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 31/03/2025 | You can add up to 6 items per a category to the compare list.  Until 31/03/2025   | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.     | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | Nine9 | OKAZAKI SEIKO | MISUMI | TRUSCO | MISUMI | OSG | MISUMI | Nine9 | MISUMI | WALTER TITEX | MISUMI | 7 LEADERS | OSG | MISUMI | MISUMI | MISUMI | MISUMI | NS TOOL | BIG DAISHOWA SEIKI | MISUMI | OSG | TRUSCO | MISUMI | OSG | OSG | OKABE | BIG DAISHOWA SEIKI | GUHRING | YAMAWA MFG | OSG | MISUMI | MISUMI | ILIX | SANKO MFG | IWATA TOOL | BIG DAISHOWA SEIKI | BIG DAISHOWA SEIKI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | DIXI | SANKO MFG | IWATA TOOL | IWATA TOOL | FUJIGEN | FUJIGEN | ATOM | OKABE | OKAZAKI SEIKO | GUHRING | YAMAWA MFG | MAKOTOLOY | MISUMI | MISUMI | MISUMI | ILIX | SANKO MFG | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | IWATA TOOL | FUJIGEN | FUJIGEN | FUJIGEN | OKABE | OKABE | BIG DAISHOWA SEIKI | GUHRING | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | SANDVIK | RUKO | Nine9 | OSG | NS TOOL | MAKOTOLOY | THE CUT | THE CUT | YAMAWA MFG | YAMAWA MFG |
| Product Series | Chamfering cutter, "Nice Men G" (titanium-coated)【1-3 Pieces Per Package】 | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | TiN-Coated High-Speed Steel Countersink / 3-Flute / 90°, 6-Size Set | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | Center Drills for Carbon Steels of Medium Hardness forRunning at High Speed_MHCDS | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack | High speed coating for Center Boy throwaway bit【5 Pieces Per Package】 | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfering end mill, 3-flute / short model | TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank | FAGCCRCL, FA-Coating Long Shank Carbide Corner Rounding Cutter | Center Drill, Okabe Standard, Long Center Drill, G Coating 90° | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | Corner Radius Cutter, Carbide, for Steel, Stainless Steel, ALD Coating | Center Drill, Okabe Standard, Long Center Drill, G Coating 60° | Long Shank Low Helix Center Drills-Type A 60°, Coated_CD-SL-V | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | Hexagonal Shank Countersink (90° Tip Angle, Titanium Coated) | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | Coated Type A 60° High Helix Single End Center Hole Drill_AUCES | Coated Type A 60° High Helix Single End Center Hole Drill_AUCDS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| From | ฿ 23.88 | ฿ 1,774.00 Special Price On Sale Until 31/03/2025 | ฿ 257.00 Special Price On Sale Until 31/03/2025 | ฿ 915.00 Special Price On Sale Until 31/03/2025 | ฿ 1,547.00 | ฿ 491.00 Special Price On Sale Until 31/03/2025 | ฿ 3,592.00 | ฿ 23.88 | ฿ 1,811.61 | ฿ 1,698.00 | ฿ 692.90 | ฿ 1,306.72 Special Price On Sale Until 31/03/2025 | ฿ 1,312.00 | ฿ 1,610.00 Special Price On Sale Until 31/03/2025 | ฿ 1,448.00 | ฿ 1,254.19 | ฿ 1,045.00 Special Price On Sale Until 31/03/2025 | ฿ 2,382.56 | ฿ 4,477.04 | ฿ 437.00 | ฿ 2,179.00 Special Price On Sale Until 30/09/2024 | ฿ 921.00 Special Price On Sale Until 31/03/2025 | ฿ 1,519.00 | ฿ 656.00 Special Price On Sale Until 31/03/2025 | ฿ 1,284.00 Special Price On Sale Until 31/03/2025 | ฿ 772.91 | ฿ 671.53 | ฿ 5,228.65 | ฿ 638.17 | ฿ 12,300.00 | ฿ 732.00 | ฿ 387.00 Special Price On Sale Until 31/03/2025 | ฿ 1,279.13 Special Price On Sale Until 31/03/2025 | ฿ 2,629.14 | ฿ 554.46 | ฿ 400.02 | ฿ 4,849.51 Special Price On Sale Until 31/03/2025 | ฿ 1,723.00 Special Price On Sale Until 31/03/2025 | ฿ 2,338.00 | ฿ 472.00 | ฿ 902.00 Special Price On Sale Until 31/03/2025 | ฿ 1,263.00 | ฿ 3,851.00 | ฿ 943.00 | ฿ 1,804.96 | ฿ 5,973.15 | ฿ 1,135.80 Special Price On Sale Until 31/03/2025 | ฿ 2,085.60 | ฿ 829.90 Special Price On Sale Until 31/03/2025 | ฿ 938.44 | ฿ 1,787.65 | ฿ 2,601.81 | ฿ 4,935.00 Special Price On Sale Until 30/09/2024 | ฿ 1,155.70 Special Price On Sale Until 31/03/2025 | ฿ 974.06 Special Price On Sale Until 31/03/2025 | ฿ 5,069.20 | ฿ 2,168.00 | ฿ 1,360.26 | ฿ 774.00 | ฿ 16,372.18 | ฿ 3,211.08 | ฿ 414.89 | ฿ 3,958.06 | ฿ 3,765.09 | ฿ 2,836.40 | ฿ 837.29 | ฿ 1,007.79 | ฿ 467.46 | ฿ 569.00 | ฿ 999,999,999.00 | ฿ 2,067.51 | ฿ 1,550.00 | ฿ 1,483.12 | ฿ 1,367.95 | ฿ 2,878.77 | ฿ 1,884.41 Special Price On Sale Until 31/03/2025 | ฿ 627.73 Special Price On Sale Until 31/03/2025 | ฿ 2,618.34 | ฿ 1,456.00 | ฿ 4,276.18 | ฿ 1,514.46 | ฿ 2,147.31 | ฿ 3,540.00 | ฿ 2,834.55 | ฿ 4,378.92 | ฿ 2,643.37 | ฿ 3,221.09 | ฿ 425.06 | ฿ 425.06 | |
| Days to Ship | Same day | Same day | Same day | Same day | 3 Day(s) | Same day | Same day | 5 Day(s) | Same day | 1 Day(s) | Same day | Same day | 5 Day(s) | Same day | 3 Day(s) | Same day | Same day | 1 Day(s) | 3 Day(s) | Same day | 5 Day(s) | Same day | 3 Day(s) | Same day | Same day | 3 Day(s) | 8 Day(s) | 23 Day(s) | 1 Day(s) | 5 Day(s) | 3 Day(s) | Same day | Same day | 5 Day(s) | Same day | 3 Day(s) | Same day | Same day | Same day | 11 Day(s) | Same day | Same day | 3 Day(s) | Same day | 5 Day(s) | 7 Day(s) | 7 Day(s) | Same day | 5 Day(s) | Same day | 5 Day(s) | 5 Day(s) | 31 Day(s) | Same day | Same day | Same day | 8 Day(s) | 3 Day(s) | Same day | 3 Day(s) | 31 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 8 Day(s) | 10 Day(s) | Quote | 31 Day(s) | 9 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | Same day | Same day | 7 Day(s) | 6 Day(s) | 5 Day(s) | 31 Day(s) | 6 Day(s) | 5 Day(s) | 20 Day(s) | 7 Day(s) | 6 Day(s) | 5 Day(s) | 10 Day(s) | 10 Day(s) |
| Specifications | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tool Material Type | Carbide | Cobalt HSS | Cobalt HSS | High-speed steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Cobalt HSS | Carbide | Cobalt HSS | Carbide | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Cobalt HSS | Carbide | Cobalt HSS | High-speed steel | High-speed steel | Cobalt HSS | High-speed steel | - | High-speed steel | Carbide | Carbide | Cobalt HSS | High-speed steel | Cobalt HSS | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | - | - | Carbide | High-speed steel | Cobalt HSS | High-speed steel | High-speed steel | Carbide | Carbide | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | - | - | - | High-speed steel | High-speed steel | - | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | - | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel |
| Tool Diameter (D)(mm) | 1–6 ～ 4～25 | 6 ～ 40 | 2 ～ 20 | - | 3 ～ 12 | 3 ～ 25 | 6.3/8.3/10.4/12.4/16.5/20.5 | 0.25～1.1 ～ 0.65～2.7 | 3 ～ 16 | 6.3 ～ 20.5 | 6.3 ～ 20.5 | 0.5 ～ 20 | 0.5 ～ 12 | 0.5 ～ 5 | 3 ～ 16 | - | 2 ～ 12 | 0.8 ～ 12.1 | - | 10 ～ 35 | 0.5 ～ 25 | - | 3 ～ 12 | 3 ～ 25 | 4.3 ～ 37 | 0.3 ～ 12 | - | 25 ～ 50 | 1 ～ 6 | 1 ～ 3.8 | 2 ～ 12 | 1 ～ 4 | 4.3 ～ 37 | 9 ～ 46 | 0.4 ～ 12 | - | - | 3 ～ 12 | 3 ～ 12 | 10 ～ 25 | 1 ～ 4 | 6.3 ～ 20.5 | - | 0.8 ～ 1 | 3 ～ 25 | 2 ～ 12 | 4 ～ 14 | 0.1 ～ 6 | 0.5 ～ 4 | - | - | 0.02 ～ 3 | 1 ～ 5 | 36 ～ 66 | 4.3 ～ 31 | 3 ～ 20 | 3 ～ 25 | 3 ～ 12 | 10 ～ 25 | 1 ～ 4 | 16.5,20.5,25.0,37.0 | 4 ～ 14 | 0.3 ～ 9 | 3 ～ 5 | 3 ～ 12 | 0.6 ～ 4 | 0.4 ～ 16 | - | - | - | 1 ～ 6 | 1 ～ 5 | - | 4 ～ 12 | 4 ～ 12 | 5 ～ 20 | 4 ～ 16 | 4 ～ 18 | 4 ～ 12 | 4 ～ 12 | 8 ～ 12 | 1.5 ～ 3.5 | - | - | 1.5 | 1 ～ 20 | 1 ～ 2.5 | 3 ～ 20 | 1 ～ 6 | 1 ～ 6 |
| Tip angle (θ) | 60 ～ 142 | 90 | 90 ～ 120 | 90 | 90 | 60 ～ 120 | - | 45 ～ 60 | 60 ～ 120 | 90 | - | 90 | 90° ～ 140° | - | 60 ～ 120 | - | 90 ～ 120 | - | 90 ～ 120 | - | 90 | 90 | 60 ～ 120 | 90 | 60 ～ 120 | 60 | 45 | 90 | 60° | 90 | 90 | - | 90 | - | 60 | - | 90 | 60 ～ 120 | 90 | 60 ～ 160 | - | - | - | 90 | 90 | 90 | - | 90 | 90 | - | - | 90 | 90 | 90 | 90 | 125° | 120 | 90 | 60 ～ 120 | - | 90 | - | 90 | - | 90 | 90 | 120 | - | - | - | 60×120 | 60 | 45° | 120 | 90 | 90 | 125° | 60° | 60° | - | 90° | 90 | 145+90 | 90° | - | 90 | - | 60 ～ 120 | 60 | 60 |
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) / Engraved | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) | Chamfering/Horizontal | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Hole Chamfer | Round Chamfer | Centering (Positioning) | Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) | Hole Chamfer | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Drilling | Centering (Positioning) | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) | Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Hole Chamfer | Chamfering/Horizontal / Round Chamfer | Centering (Positioning) | Centering (Positioning) | Round Chamfer | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | - | Chamfering/Horizontal | Hole Chamfer | - | Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling | Round Chamfer | Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other | Centering (Positioning) | Centering (Positioning) |
| work material | general steel[○/◎] / Quenched and tempered steel[○/◎] / high hardness steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | Stainless Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | - | - | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | - | - | - | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | Double-edged | Single blade | Single blade | Single blade | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged | - | Single blade | Single blade | Single blade | Single blade | Double-edged | Single blade | - | Double-edged | - | - | Single blade | Single blade | Single blade | Double-edged | Single blade | Single blade | Single blade | Single blade | - | - | Single blade / Double-edged | Single blade / Double-edged | - | - | Single blade | Double-edged | Single blade | Single blade | Double-edged | Single blade | Single blade | Single blade | Double-edged | Single blade | - | Single blade / Double-edged | Single blade | Single blade | Single blade | Single blade / Double-edged | - | - | - | Double-edged | Double-edged | Single blade | - | - | Single blade | Double-edged | Double-edged | Double-edged | - | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | - | NA | NA | NA | NA | NA | - | NA | NA | NA | NA | Available | NA | Available | NA | - | - | NA | NA | NA | NA | Available | NA | NA | - | NA | Available | Available | Available | NA | NA | NA | NA | Available | - | NA | NA | NA | - | - | Available | NA | NA | - | NA | - | Available | Available | NA | Available | NA | NA | NA | NA | NA | NA | - | - | - | NA | NA | NA | - | - | - | NA | NA | NA | - | NA | Available | - | NA | NA | - | - | - | Available | Available |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN / TiN / DLC / Non-Coated | TiN | TiN | TiN | TS | TiN | TiN | TiAlN / TiN | TS | TiN | TiN | Other | Other | TiAlN | AlCrN | TS | TiAlN | TiAlN | TiN | TiN | TiAlN | TiN | AlCrN | TiCN | Other | TiN | Other | TiN | TiCN | TiAlN | TiAlN | TiN | TiN | TiCN | TiCN | Other | TiN | TS | TS | TiCN | TiAlN | TiAlN | AlCrN | TiAlN | TiCN | TiAlN | TiAlN | Other | Other | TiAlN / TiN | TiAlN / TiN / AlCrN | TiAlN | TiN | TiN | TiAlN | TiCN | TiN | TS | - | TiAlN | TiN | TiAlN | TiCN | Other | DLC | Other | Other | TiAlN | TiAlN | TiN / AlCrN | TiN | TiN | Other | TiAlN | TiAlN | Other | TiCN | TiN | TiN | - | Other | TiN | TiAlN | - | TiCN | TiAlN | TiAlN | TiAlN | - | - |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | - | 0.1 ～ 5 | - | - | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | 0.5 ～ 15 | - | 0.2 | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 5 | - | 0.5 ～ 3 | - | - | - | - | - | - | - | - | 0.5 ～ 4 | - | - | - | - | - | - | - | - | - | - | - | 0.5 ～ 3 | - | 0.25 ～ 2.5 | - | - | - |
Loading...
Related Categories to Chamfering / Centering Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?