(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 16/6/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Roll Taps（Screw size (Nominal)：M1.8）
A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0UN
- No.10
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.12-28UNF
- No.12-24UNC
- No.2
- No.2UN
- No.2-64UNF
- No.2-56UNC
- No.3
- No.3UN
- No.3-56UNF
- No.3-48UNC
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- No.5-44UNF
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- No.8-36UNF
- No.8-32UNC
- 0.9
- S0.9
- M1
- 1/4
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.5
- M4
- M5
- M6
- No6-40UNF
- M7
- M8
- M9
- M10
- M11
- M12
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Screw Types
- Meter
- unified
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
- 9 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.From: ฿ 912.00 Days to Ship: 
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 533.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holesFrom: ฿ 533.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 466.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,248.22 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ N+RZ/N-RZ are the forming taps suitable forferrous materials such as carbon steels, alloysteels, and normal steels.From: ฿ 764.92 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,248.22 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.From: ฿ 1,781.31 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Roll Taps for Non-Ferrous Materials_N+RS
YAMAWA MFG
■ N+RS/N-RS are the forming taps suitable fornon-ferrous materials such as aluminum castings,aluminum diecasting and brass.From: ฿ 865.30 Days to Ship:
20 Day(s)
20 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | |
| Brand | OSG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | TANOI MFG | TANOI MFG | YAMAWA MFG |
| Product Series | |||||||||
| From | ฿ 912.00 | ฿ 533.00 | ฿ 533.00 | ฿ 466.00 | ฿ 1,248.22 | ฿ 764.92 | ฿ 1,248.22 | ฿ 1,781.31 | ฿ 865.30 |
| Days to Ship | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 20 Day(s) | 5 Day(s) | 31 Day(s) | 20 Day(s) |
| Screw size (Nominal) | M1.8 | M1.8 | M1.8 | M1.8 | M1.8 | M1.8 | M1.8 | M1.8 | M1.8 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.35 | 0.35 | 0.35 | 0.35 | 0.2 ～ 0.35 | 0.35 | 0.2 ～ 0.35 | 0.2 ～ 0.35 | 0.35 |
| Tool Material Type | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Tap Type | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap |
| Hole type | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | - | For through hole / For blind hole | - | - | For through hole / For blind hole |
| Chamfer threads (Lcf) | 2P ～ 4P | 2P ～ 4P | 2P ～ 4P | 2.5P | 1P ～ 4P | 4P | 1P ～ 4P | 1P ～ 4P | 2P ～ 4P |
| Coating Type | TiN | TiN | Non-Coated | Non-Coated | Other | - | TiCN | TiCN | - |
| Coating Y/N | Available | Available | NA | NA | Available | NA | Available | Available | NA |
| Overall Length (L)(mm) | 36 | 36 | 36 | 36 | 36 | 42 | 36 | 60 | 42 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?