(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 16/6/2024. We apologize for the inconvenience.
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Roll Taps（Screw size (Nominal)：M20）
A forming tap is a raised type screw forming tool that makes a screw mark on a metal pilot hole. It can be used for both blind holes and through holes, and there is almost no chips, so cleaning can be shortened, etc. Depending on the product, there is also a special processing that enables long-life processing without chip problems, and low torque is achieved by adopting a special shape for the tap raised part. Others have a tin coating and have excellent abrasion and chip-welding resistance. Compatible materials for processing include rolled aluminum, structural steel, copper, etc. The selection point of the forming tap is not suitable for the work material, so select one suitable for the work material used. At the same time, it is necessary to check the screw length, nominal size, pitch, number of bites, etc., depending on the place to be used before selecting.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0UN
- No.10
- No.1UN
- No.10UN
- No.10-32UNF
- No.10-24UNC
- No.12
- No.12UN
- No.12-28UNF
- No.12-24UNC
- No.2
- No.2UN
- No.2-64UNF
- No.2-56UNC
- No.3
- No.3UN
- No.3-56UNF
- No.3-48UNC
- No.4
- No.4UN
- No.4-48UNF
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- No.5-44UNF
- No.5-40UNC
- 0.6
- No.6
- No.6UN
- S0.6
- No.6-32UNC
- 0.7
- S0.7
- 0.8
- No.8
- No.8UN
- S0.8
- No.8-36UNF
- No.8-32UNC
- 0.9
- S0.9
- M1
- 1/4
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.5
- M4
- M5
- M6
- No6-40UNF
- M7
- M8
- M9
- M10
- M11
- M12
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Screw Types
- Meter
- unified
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Steel casting (SC)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
- 8 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.From: ฿ 4,825.00 Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.From: ฿ 7,669.00 Special Price Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Fluteless (Nu-Roll) Tap for Non-Ferrous Metals_B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.From: ฿ 2,979.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
Grooveless Tap Series Ultra-Synchro Tap US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.From: ฿ 5,099.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 6,261.36 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
High Performance Roll Taps, Coated_HP+RZ
YAMAWA MFG
■ The HP+RZ/HP-RZ roll taps are suitable for processing steel materials with a hardness of 35 HRC or lessand light alloys. These roll taps are recommended for high speed machining 20 to 50 m / min.
■Roll form processing of stainless steel and thermal refined materials up to 40 HRC are now possible.
■ The roll form tapping torque has been reduced by 20% or more, making it possible to significantlyimprove tool life compared with conventional roll form tap products.
■The HP+RZ/HP-RZ taps make it possible to use a water soluble cutting fluid.From: ฿ 8,613.96 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
YAMAWA MFG
■ N+RZ/N-RZ are the forming taps suitable forferrous materials such as carbon steels, alloysteels, and normal steels.From: ฿ 4,622.93 Days to Ship:
20 Day(s)
20 Day(s)
-
You can add up to 6 items per a category to the compare list.
GUHRING
[Features]
· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.From: ฿ 5,130.00 Days to Ship:
24 Day(s)
24 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | OSG | OSG | OSG | TANOI MFG | YAMAWA MFG | YAMAWA MFG | GUHRING |
| Product Series | ||||||||
| From | ฿ 4,825.00 | ฿ 7,669.00 Special Price On Sale Until 30/06/2024 | ฿ 2,979.00 | ฿ 5,099.00 | ฿ 6,261.36 | ฿ 8,613.96 | ฿ 4,622.93 | ฿ 5,130.00 |
| Days to Ship | Same day | 5 Day(s) | 5 Day(s) | 5 Day(s) | 5 Day(s) | 20 Day(s) | 20 Day(s) | 24 Day(s) |
| Screw size (Nominal) | M20 | M20 | M20 | M20 | M20 | M20 | M20 | M20 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | unified | Meter | Meter |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] | - |
| Pitch (P), Number of Threading(mm) | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 ～ 2.5 | 1.5 | 1.5 | 2.5 |
| Tool Material Type | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel |
| Tap Type | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap |
| Hole type | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | - |
| Chamfer threads (Lcf) | 2P ～ 4P | 2P | 2P ～ 4P | 2P | 1P ～ 2P | 2P ～ 4P | 2P ～ 4P | - |
| Coating Type | TiN | TiCN | TiN | TiCN | TiCN | TiCN | - | TiN |
| Coating Y/N | Available | Available | Available | Available | Available | Available | NA | Available |
| Overall Length (L)(mm) | 105 | 125 ～ 140 | 105 | 105 | 95 ～ 105 | 105 | 105 | 105 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?