(!) Since support from Microsoft will end on January 14 2020, Windows 7 user might not be able to use MISUMI website effectively. Please consider to update your system as ‘MISUMI Website system requirement’.
-
Viewed
Products -
My
Components - Cart
- แจ้งวันหยุดทำการในเดือน มิถุนายน 2567 | Notice holiday in June 2024 > คลิก
Point Taps（work material：Cast Iron (FC)）
[What is a point tap?]
It is a groove-shaped cutting tap that discharges chips in the tap traveling direction, and is ideal for machining "through holes". It is characterized by low cutting torque as there are few obstacles to the chips. There are two types of materials, mainly HSS (= high speed steel) and carbide: HSS is tough and hard to break and carbide is abrasion resistant.
Configure
Specification/Dimensions
-
Screw size (Nominal)
- No.0
- No.0UN
- No.10
- No.1
- No.1UN
- No.10UN
- No.10UNJ
- No.10-32UNF
- No.10-24UNC
- No.12UN
- No.2
- No.2UN
- No.3
- No.3UN
- No.4
- No.4UN
- No.4-40UNC
- No.5
- No.5UN
- No.5-40UNC
- No.6
- No.6UN
- No.6UNJ
- S0.6
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- No.8-32UNC
- S0.9
- 1
- 1UN
- G1
- M1
- W1
- 1"1/2UN
- W1"1/2
- 1 1/4
- 1"1/4UN
- W1"1/4
- 1 1/8
- 1"1/8UN
- W1"1/8
- 1/2
- 1/2UN
- 1/2UNJ
- G1/2
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- W1"3/4
- 1"3/8UN
- W1"3/8
- 1/4
- 1/4UN
- 1/4UNJ
- G1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4W20
- W1"5/8
- W1"7/8
- 1/8UN
- G1/8
- SM1/8
- W1/8
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- 2
- M2
- M2.0
- W2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- M3
- STI M3
- 3/4
- 3/4UN
- G3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNJ
- G3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/16
- 3/16UN
- SM3/16
- W3/16
- 3/32
- SM3/32
- W3/32
- M3.5
- 4M
- M4
- M4.0
- M4
- STI M4
- M4.5
- 5M
- M5
- M5.0
- M5
- STI M5
- 5/8
- 5/8UN
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16
- 5/16UN
- 5/16UNJ
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- 6UN
- M6
- M6.0
- M6
- STI M6
- M7
- 7/8
- 7/8UN
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16
- 7/16UN
- 7/16UNJ
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/32
- W7/32
- 8UN
- M8
- M8.0
- M8
- STI M8
- M9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- 10UN
- M10
- M10.0
- M10
- STI M10
- M11
- 11/64
- SM11/64
- M12
- M12.0
- M12
- STI M12
- M13
- M14
- M14.0
- M14
- M15
- SM15/64
- M16
- M16.0
- M16
- M17
- M18
- M18
- M19
- M20
- M20
- M22
- M22
- M23
- M24
- M24
- M25
- M26
- M27
- M28
- M30
- M32
- M33
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Parallel for Pipes
- Miniature
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
- 21 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
Until 31/12/2024
Until 31/12/2024Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the wayFrom: ฿ 176.00 Special Price Days to Ship: 
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.From: ฿ 248.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
From: ฿ 380.00 Days to Ship:
5 Day(s)
5 Day(s)
-
You can add up to 6 items per a category to the compare list.
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]
·Can be used for through hole machining
·It can handle a wide range of work materials, but is especially effective for tapping steel alloy and stainless steel, etc.
·Excellent abrasion resistance and chip-weld resistance due to TiN coating
·Long shank type ideal for drilling deep thread holes (G-LS-POT)From: ฿ 352.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
[Features]
·High-speed steel uncoated spiral point tap
·Can be used for through hole machining
·Effective for work materials with continuous cutting chip such as carbon steel and steel alloyFrom: ฿ 1,128.23 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
From general steel to difficult-to-cut materials, this coated tap allows high-speed, high-efficiency threading of through holes.
[Features]
· Adopts powdered high-speed steel with excellent wear resistance.
· Tap with TiN coating on the surface and stable service life due to high-speed and high-efficiency threading.
[Applications]
· High-speed, high-efficiency threading of through holes on materials ranging from general steel to difficult-to-cut materials, etc.From: ฿ 1,074.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 298.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
CPM Pointed Tap with Long Shank_CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRCFrom: ฿ 723.00 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Until 30/06/2024
Until 30/06/2024Long Shank・General Application_EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.From: ฿ 423.00 Special Price Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
Spiral Pointed Taps for Left Hand Threads_PO-V
YAMAWA MFG
■ Adopting the optimum coating for the tappingcondition.From: ฿ 657.11 Days to Ship:
Same day
Same day
-
You can add up to 6 items per a category to the compare list.
SKC
[Features]
·Steam oxide treatment for excellent rust prevention, corrosion resistance, and durability
[Applications]
·Plating processing, heat treatment processingFrom: ฿ 731.56 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 504.79 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B
YAMAWA MFG
■ The HFICT-P is a carbide tap capable of ultra high speed tapping. It has a side coolant holes for internal lubrication distributionor mist applications. It can lower temperature by cooling in a dry tapping application where necessary with an air blast. It issuitable for though hole tapping in materials such as cast irons and brass castings.From: ฿ 5,690.94 Days to Ship:
19 Day(s)
19 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 672.33 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
WALTER PROTOTYP
Suitable for high precision blind-hole and through-hole thread processing up to screw depths of 3 x D. Suitable for short chipping materials of 100-1,000 N/mm² and up to 32 HRC.From: ฿ 1,863.00 Days to Ship:
12 Day(s)
12 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 497.54 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 398.97 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 610.61 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Machine Nut Tap, for Metric Coarse Thread (Angle: 60°)
SKC
[Applications]
Can be used to machine nuts.
[Features]
For right-hand coarse threads.From: ฿ 876.80 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
From: ฿ 535.03 Days to Ship:
31 Day(s)
31 Day(s)
-
You can add up to 6 items per a category to the compare list.
Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P
YAMAWA MFG
■ The HFICT-P is a carbide tap capable of ultra high speed tapping. It has a side coolant holes for internal lubrication distributionor mist applications. It can lower temperature by cooling in a dry tapping application where necessary with an air blast. It issuitable for though hole tapping in materials such as cast irons and brass castings.From: ฿ 5,690.94 Days to Ship:
19 Day(s)
19 Day(s)
| Brand |
|---|
| Product Series |
| From |
| Days to Ship |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
You can add up to 6 items per a category to the compare list.  Until 31/12/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  Until 30/06/2024 | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| Brand | OSG | MISUMI | NACHI(FUJIKOSHI) | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | YAMAWA MFG | SKC | SKC | YAMAWA MFG | NACHI(FUJIKOSHI) | WALTER PROTOTYP | SKC | SKC | SKC | SKC | SKC | YAMAWA MFG |
| Product Series | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-B | Carbide Taps for Ultra Fast Tappings, Through Hole Use, for Cast Irons_HFICT-P | ||||||||||||||||||
| From | ฿ 176.00 Special Price On Sale Until 31/12/2024 | ฿ 248.00 | ฿ 380.00 | ฿ 352.00 | ฿ 1,128.23 | ฿ 1,074.00 | ฿ 298.00 Special Price On Sale Until 30/06/2024 | ฿ 723.00 | ฿ 423.00 Special Price On Sale Until 30/06/2024 | ฿ 657.11 | ฿ 731.56 | ฿ 504.79 | ฿ 5,690.94 | ฿ 672.33 | ฿ 1,863.00 | ฿ 497.54 | ฿ 398.97 | ฿ 610.61 | ฿ 876.80 | ฿ 535.03 | ฿ 5,690.94 |
| Days to Ship | Same day | Same day | 5 Day(s) | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 31 Day(s) | 31 Day(s) | 19 Day(s) | 31 Day(s) | 12 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 31 Day(s) | 19 Day(s) |
| Screw size (Nominal) | No.0UN ～ M48 | M2 ～ M24 | M3 ～ M12 | M3 ～ M10 | M2 ～ M12 | M3 ～ M8 | M1.4 ～ M48 | M3 ～ M24 | W1 ～ M36 | M3 ～ M12 | M6 | 1UN ～ 10UN | M6 ～ M12 | M3 ～ M24 | M8 | M3 ～ M12 | W1 ～ W9/16 | M6 ～ M33 | M4 ～ M5 | 1UN ～ 10UN | M6 ～ M12 |
| Screw Types | Meter / unified / Whitworth / Sewing Machine | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Whitworth | Meter | Meter | unified | Meter | Meter | Meter | Meter | Whitworth | Meter | Meter | unified | Meter |
| work material | Cast Iron (FC)[○] | Cast Iron (FC)[◎] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] | Cast Iron (FC)[○] |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 0.4 ～ 3 | 0.5 ～ 1.75 | 0.5 ～ 1.5 | 0.4 ～ 1.75 | 0.5 ～ 1.25 | 0.3 ～ 5 | 0.5 ～ 3 | 0.4 ～ 20 | 0.5 ～ 1.75 | 1 | 6 ～ 40 | 1 ～ 1.75 | 0.35 ～ 3 | 1.25 | 0.5 ～ 1.75 | 4 1/2 ～ 48 | 0.75 ～ 2 | 0.7 ～ 0.8 | 12 ～ 32 | 1 ～ 1.75 |
| Tool Material Type | Vanadium High-Speed Steel | Cobalt HSS | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | - | - | Carbide | High-speed steel | Powder high-speed steel | - | - | - | - | - | Carbide |
| Tap Type | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap |
| Hole type | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | - | - | For blind hole | For through hole | For through hole / For blind hole | - | - | - | - | - | For through hole |
| Chamfer threads (Lcf) | 5P | 5P | 5 | 5P | 5P | 5P | 5P | 5P | 5P | 5P | - | - | 2.5P | 5 | - | - | - | - | - | - | 4P |
| Coating Type | Non-Coated | Non-Coated | - | TiN | - | TiN | Non-Coated | Non-Coated | Non-Coated | TiN | - | - | TiAlN | - | Non-Coated | - | - | - | - | - | TiAlN |
| Coating Y/N | NA | NA | NA | Available | NA | Available | NA | NA | NA | Available | - | - | Available | - | NA | - | - | - | - | - | Available |
| Overall Length (L)(mm) | 30 ～ 185 | 40 ～ 120 | 46 ～ 82 | 46 ～ 150 | 40 ～ 82 | 46 ～ 70 | 34 ～ 185 | 100 ～ 200 | 80 ～ 300 | 46 ～ 82 | 62 | - | 62 ～ 82 | 100 ～ 200 | 70 | 46 ～ 82 | 80 ～ 420 | - | 100 ～ 110 | - | 62 ～ 82 |
Loading...
Payment Methods
- Credit Card
-
- Bank
-
- Prompt Pay
-
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?